Imaging the activity of nitrate reductase by means of a scanning electrochemical microscope

Scanning electrochemical microscopy (SECM) was used to characterize immobilized nitrate reductase (NaR) from Pseudonomonas stutzeri (E.C. 1.7.99.4). Nitrate reductase with membrane fragment was embedded in a polyurethane hydrogel in a capillary and solubilized NaR without membrane fragment was covalently coupled to a diaminoethyl-cellulose-carbamitate film on glass. After systematic studies of possible mediators, SECM feedback imaging of both forms of immobilized NaR was accomplished with methylviologen as redox mediator.     

Immobilization of Glucose Oxidase on Cellulose／Cellulose Acetate Membrane and its Detection by Scanning Electrochemical Microscope （SECM）

Cellulose/cellulose acetate membranes were prepared and functionalized by introducingamino group on it, and then immobilized the glucose oxidase (Gox) on the functionalizd membrane.SECM was applied for the detection of enzyme activity immobilized on the membrane.Immobilized biomolecules on such membranes was combined with analysis apparatus and can beused in bioassays.     

Accurately measuring respiratory activity of single living cells by scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is a powerful tool to examine the respiratory activity of living cells. However, in SECM measurements of cell respiratory activity, the signal recorded usually also includes the signal corresponding to the cell topography. Therefore, measurements of cell respiratory activity using conventional SECM techniques are not accurate. In the present work, we develop a method for accurate measurement of the respiratory activity of single living cells using SECM. First, cells are immobilized on a glass substrate modified with collagen. Then, a Pt ultramicroelectrode tip of SECM held at −0.50 V is scanned along the central line across a living cell and a SECM scan curve, i.e., the relationship of the tip current versus the displacement (the first scan curve) is recorded with a negative peak. The peak current i_p on this first scan curve is composed of i_p1, which corresponds to the cell respiratory activity and i_p2, which corresponds to the cell topography. In order to isolate the i_p2 component, the cell is killed by exposing it to 1.0 × 10⁻³ mol/L KCN for 10 min. The tip is then scanned again with the same trace over the dead cell, and a second SECM scan curve is recorded. Noting that the topography of the dead cell is the same as that of the living cell, this second scan curve with a negative peak corresponds now only to the cell topography. Thus, i_p2 is obtained from the second SECM scan curve. Finally, i_p1 corresponding to the respiratory activity of the living cell can be accurately calculated using i_p1 = i_p − i_p2. This method can be used to monitor real-time change in the respiratory activity of single cells after exposing them to KBr, NaN₃ and KCN.     

Fabrication of Active Horseradish Peroxidase Micropatterns with a High Resolution by Scanning Electrochemical Microscopy

We used a new reactive species OH^? to fabricate active horseradish peroxidase (HRP) micropatterns with a high resolution by scanning electrochemical microscopy (SECM) coupled with a carbon fiber disk electrode as the SECM tip. In this method, except for active HRP micropatterns predesigned other regions on a HRP‐immobilized substrate were deactivated by OH^? generated at the tip held at ?1.7 V in 1.0 mol/L KCl containing 2.0×10^?3 mol/L benzoquinone (BQ) (pH 8.0). The feedback mode of SECM with a tip potential of ?0.2 V was used to characterize the active HRP micropatterns in 1.0 mol/L KCl containing 2.0×10^?3 mol/L BQ and 2.0×10^?3 mol/L H₂O₂.     

Electrochemical Investigation of Cytochrome c Immobilized onto Self‐Assembled Monolayer of Captopril

The electrochemical behavior of cytochrome c (cyt‐c) that was electrostatically immobilized onto a self‐assembled monolayer (SAM) of captopril (capt) on a gold electrode has been investigated. Cyclic voltammetry, scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy were employed to evaluate the blocking property of the capt SAM. SECM was used to measure the bimolecular electron transfer (ET) kinetics (k_BI) between a solution‐based redox probe and the immobilized protein. In addition, the tunneling ET between the immobilized protein and the underlying gold electrode was calculated. A k_BI value of (5.0±0.6)×10⁸ mol^?1 cm³ s^?1 for the bimolecular ET and a standard tunneling rate constant (k⁰) of 46.4±0.2 s^?1 for the tunneling ET have been obtained.     

Fabricating and imaging carbon-fiber immobilized enzyme ultramicroelectrodes with scanning electrochemical microscopy.

The scanning electrochemical microscope (SECM) is used to image the activity of enzymes immobilized on the surfaces of disk-shaped carbon-fiber electrodes. SECM was used to map the concentration of enzymatically produced hydroquinone or hydrogen peroxide at the surface of a 33-microm diameter disk-shaped carbon-fiber electrode modified by an immobilized glucose-oxidase layer. Sub-monolayer coverage of the enzyme at the electrode surface could be detected with micrometer resolution. The SECM was also employed as a surface modification tool to produce microscopic regions of enzyme activity by using a variety of methods. One method is a gold-masking process in which microscopic gold patterns act as mask for producing patterns of chemical modification. The gold masks allow operation in both a positive or negative process for patterning enzyme activity. A second method uses the direct mode of the SECM to produce covalently attached amine groups on the carbon surface. The amine groups are anchors for attachment of glucose oxidase by use of a biotin/avidin process. The effect of non-uniform enzyme activity was investigated by using the SECM tip to temporarily damage an immobilized enzyme surface. SECM imaging can observe the spatial extent and time-course of the enzyme recovery process.     

In situ monitoring of functional activity of extracellular matrix stiffness-dependent multidrug resistance protein 1 using scanning electrochemical microscopy

Extracellular matrix (ECM) stiffness affects the drug resistance behavior of cancer cells, while multidrug resistance protein 1 (MRP1) on the cell membrane confers treatment resistance via actively transporting drugs out of cancer cells. However, the relationship between ECM stiffness and MRP1 functional activity in cancer cells remains elusive, mainly due to the technical challenge of in situ monitoring. Herein, we engineered in vitro cancer cell models using breast cancer cells (MCF-7 and MDA-MB-231 cells) as the reprehensive cells on polyacrylamide (PA) gels with three stiffness, mimicking different developmental stages of cancer. We in situ characterized the functional activity of MRP1 and investigated the effect of ECM stiffness on MRP1 of cancer cells before and after vincristine treatment using scanning electrochemical microscopy (SECM) with ferrocenecarboxylic acid (FcCOOH) as the redox mediator and endogenous glutathione (GSH) as the indicator. The SECM results show that the functional activity of MRP1 is enhanced with increasing ECM stiffness, and the MRP1-mediated vincristine efflux activity of MCF-7 cells is more affected by ECM stiffness than that of MDA-MB-231 cells. This work, for the first time, applied SECM to in situ and quantitatively monitor the functional activity of MRP1 in cancer cells in different tumor mechanical microenvironments, which could help to elucidate the mechanism of matrix stiffness-dependent drug resistance behavior in cancer cells.

SECM using FcCOOH as the redox mediator and endogenous GSH as the indicator was employed to investigate the effect of extracellular matrix stiffness on the functional activity of MRP1 in cancer cells in situ.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.     

Air Gap Microcell for Scanning Electrochemical Microscopic Imaging of Carbon Dioxide Output. Model Calculation and Gas Phase SECM Measurements for Estimation of Carbon Dioxide Producing Activity of Microbial Sources

Most of SECM studies have been carried out in liquid or gel phases. A Severinghaus type, CO₂ detecting potentiometric tip has been fabricated and used in gas phase SECM studies. The microcell tip is made without gas permeable membrane. Faster response, needed in SECM, was achieved by substituting the membrane with an air gap. The carbon dioxide concentration profile in the gas phase over a disc‐shaped colony of yeast has been detected with the new tip. Estimation of the carbon dioxide output of the fungi colony was attempted by fitting simulated curves to measured ones obtained with one dimensional (line) scans.     

Scanning electrochemical microscopy studies of glutathione-modified surfaces. An erasable and sensitive-to-reactive oxygen species surface

A surface sensitive to reactive oxygen species (ROS) was prepared by reduction of a diazonium salt on glassy carbon electrode followed by the chemical coupling of glutathione (GSH) playing the role of an antioxidant species. The presence of active GSH was characterized through spectroscopic studies and electrochemical analysis after labeling of the -SH group with ferrocene moieties. The specific reactivity of GSH vs ROS was evaluated with scanning electrochemical microscopy (SECM) using the reduction of O(2) to superoxide, O(2)(?-), near the GSH-modified surface. Approach curves show a considerable decrease of the blocking properties of the layer due to reaction of the immobilized GSH with O(2)(?-) and the passage of GSH to the glutathione disulfide (GSSG). The initial surface could be regenerated several times with no significant variations of its antioxidant capacity by simply using the biological system glutathione reductase (GR)/NADPH that reduces GSSG back to GSH. SECM imaging shows also the possibility of writing local and erasable micropatterns on the GSH surface by production of O(2)(?-) at the tip probe electrode.     

Surface patterning using scanning electrochemical microscopy to locally trigger a “click” chemistry reaction

We report on the surface micropatterning of conductive surfaces via the electrochemical triggering of a click reaction, the copper(I) catalyzed azide–alkyne cycloaddition reaction (CuAAC) by SECM via a two-step approach: (i) functionalization on the entire surface with azido-aryl groups by using the diazonium approach followed by (ii) the covalent linkage of alkyne-bearing ferrocene by CuAAC within a local area by SECM. More precisely, the click reaction was triggered by Cu(I) catalyst generation for 30 min at the SECM tip positioned ≈ 10 μm above the azido-aryl modified surface. The dimension of the spot obtained under these conditions was ≈ 75 μm. The electrochemical imaging by SECM of the ultra thin area locally clicked with ferrocene moieties was made thanks to the electrocatalytic properties of the ferrocene modified surface towards ferrocyanide electrooxidation. This local clicking procedure opens the gate to further controlled functionalization of restricted small substrates.     

Characterization of Inherently Chiral Electrosynthesized Oligomeric Films by Voltammetry and Scanning Electrochemical Microscopy (SECM)

A voltammetric and scanning electrochemical microscopy (SECM) investigation was performed on an inherently chiral oligomer-coated gold electrode to establish its general properties (i.e., conductivity and topography), as well as its ability to discriminate chiral electroactive probe molecules. The electroactive monomer (S)-2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bibenzothiophene ((S)-BT₂T₄) was employed as reagent to electrodeposit, by cyclic voltammetry, the inherently chiral oligomer film of (S)-BT₂T₄ (oligo-(S)-BT₂T₄) onto the Au electrode surface (resulting in oligo-(S)-BT₂T₄-Au). SECM measurements, performed in either feedback or competition mode, using the redox mediators [Fe(CN)₆]⁴⁻ and [Fe(CN)₆]³⁻ in aqueous solutions, and ferrocene (Fc), (S)-FcEA, (R)-FcEA and rac-FcEA (FcEA is N,N-dimethyl-1-ferrocenylethylamine) in CH₃CN solutions, indicated that the oligomer film, as produced, was uncharged. The use of [Fe(CN)₆]³⁻ allowed establishing that the oligomer film behaved as a porous insulating membrane, presenting a rather rough surface. This was inferred from both the approach curves and linear and bidimensional SECM scans, which displayed negative feedback effects. The oligomer film acquired semiconducting or fully conducting properties when the Au electrode was biased at potential more positive than 0.6 V vs. Ag|AgCl|KCl. Under the latter conditions, the approach curves displayed positive feedback effects. SECM measurements, performed in competition mode, allowed verifying the discriminating ability of the oligo-(S)-BT₂T₄ film towards the (S)-FcEA and (R)-FcEA redox mediators, which confirmed the results obtained by cyclic voltammetry. SECM linear scans indicated that the enantiomeric discriminating ability of the oligo-(S)-BT₂T₄ was even across its entire surface.     

Evaluation of Redox Activity of Human Myocardium‐derived Mesenchymal Stem Cells by Scanning Electrochemical Microscopy

In this study the redox activity of human myocardium‐derived mesenchymal stem cells (hmMSC) were investigated by redox‐competition (RC‐SECM) and generation‐collection (GC‐SECM) modes of scanning electrochemical microscopy (SECM), using 2‐methylnaphthalene‐1,4‐dione (menadione, MD) as a redox mediator. The redox activity of human healthy and dilated hmMSCs was evaluated by measuring reduction of MD. Measurements were performed by approaching and retracting the UME from the surface of growing hmMSC cells. The current study shows that the RC‐SECM mode can be applied to investigate integrity of cell membranes, whereas the most promising results were observed by using the GC‐SECM mode and applying the Hill's equation for the calculation/fitting of dependencies of electrical current vs menadione concentration. The calculated apparent Michaelis constant (K_M) for the production of menadiol (MDH₂) in the pathological hmMSC cells was 14.4 folds higher compared to that of the healthy hmMSC revealing the lover redox activity of pathological cells. Moreover, the calculated Hill's coefficient n shows a negative cooperative binding between MD and healthy hmMSC and positive cooperative binding between MD and pathological hmMSC. It means that healthy hmMSC is of lower affinity to MD, which is also related to the better membrane integrity of healthy cells. Data of this study demonstrate that SECM can be applied to investigate intracellular redox and membrane changes ongoing in human dilated myocardium‐derived hmMSC in order to improve their functioning and further regenerative potential.     

Detection and Quantification of Sulfonamide Antibiotic Residues in Milk Using Scanning Electrochemical Microscopy

The use of scanning electrochemical microscopy (SECM) for the qualitative and quantitative determination of sulfapyridine (SPY) in milk is described. A direct competitive immunoassay was performed involving an antibiotic horseradish peroxidase (HRP)‐labeled analog and using selective capture antibodies immobilized on the surface of Protein G‐modified glassy carbon plates. SECM detection was accomplished by means of the sample generator/tip collector (GC) mode involving the reduction of benzoquinone (BQ) generated upon the HRP‐catalyzed oxidation of hydroquinone (HQ) at the modified substrate surface in the presence of H₂O₂. The detection limit for SPY in milk samples was as low as 0.13 ng mL^?1.     

Use of CdSe/ZnS luminescent quantum dots incorporated within sol-gel matrix for urea detection

In this work, urea detection techniques based on the pH sensitivity of CdSe/ZnS QDs were developed using three types of sol-gel membranes: a QD-entrapped membrane, urease-immobilized membrane and double layer consisting of a QD-entrapped membrane and urease-immobilized membrane. The surface morphology of the sol-gel membranes deposited on the wells in a 24-well microtiter plate was investigated. The linear detection range of urea was in the range of 0-10 mM with the three types of sol-gel membranes. The urea detection technique based on the double layer consisting of the QD-entrapped membrane and urease-immobilized membrane resulted in the highest sensitivity to urea due to the Michaelis-Menten kinetic parameters. That is, the Michaelis-Menten constant (K_m =2.0745 mM) of the free urease in the QD-entrapped membrane was about 4-fold higher than that (K_m =0.549 mM) of the immobilized urease in the urease-immobilized membrane and about 12-fold higher than that (K_m =0.1698 mM) of the immobilized urease in the double layer. The good stability of the three sol-gel membranes for urea sensing over 2 months showed that the use of sol-gel membranes immobilized with QDs or an enzyme is suitable for biomedical and environmental applications.     

Electrochemical detection of receptor-mediated endocytosis by scanning electrochemical microscopy

We report a scanning electrochemical microscopy (SECM)-based receptor-mediated endocytosis detection method. Epidermal growth factor receptor (EGFR), which is one of the key membrane proteins associated with cancer, was used as a model for receptor-mediated endocytosis. EGFR molecules on the outer cell membrane were detected by SECM by using alkaline phosphatase (ALP) as a labeling enzyme. Since SECM detected the ALP activity on the outer membrane, the procedure helped discriminate the EGFR on the outer membrane from the intracellular EGFR involved in endocytosis. SECM showed a marked decrease in the current responses generated due to ALP activity by 93% on addition of the epidermal growth factor, indicating clearly that EGF triggered the endocytosis, which led to the withdrawal of most EGFRs from the outer membrane.     

Immobilization of Mercuric reductase from aPseudomonas putida strain on different activated carriers

Mercuric reductase was isolated fromPseudomonas putida KT2442::mer-73 and immobilized on Chromatographic carriers activated by various methods. The immobilization methods for covalent coupling were compared with regard to preservation of enzymatic activity and coupling yields. Highest yields were obtained with carriers bearing the most reactive functional groups. Best results were achieved with tresyl chloride-activated carriers. The optimum binding conditions were found at pH 8. Application of the immobilized mercuric reductase for continuous treatment of Hg(II)-containing water was examined in a fixed bed reactor. Space-time yields up to 510 nmol/min-mL were attained. The kinetics of immobilized enzyme systems were not diffusion-controlled.     

Impact of High Temperature on Ethanol Fermentation by Kluyveromyces marxianus Immobilized on Banana Leaf Sheath Pieces

Ethanol fermentation was carried out with Kluyveromyces marxianus cells at various temperatures (30, 35, 40, and 45 °C). Fermentation performance of the immobilized yeast on banana leaf sheath pieces and the free yeast were evaluated and compared. Generally, ethanol production of the immobilized and free yeast was stable in a temperature range of 30–40 °C. Temperature of 45 °C restricted yeast growth and lengthened the fermentation. The immobilized yeast demonstrated faster sugar assimilation and higher ethanol level in the fermentation broth in comparison with the free yeast at all fermentation temperatures. Change in fatty acid level in cellular membrane was determined to clarify the response of the free and immobilized yeast to thermal stress. The free cells of K. marxianus responded to temperature increase by increasing saturated fatty acid (C16:0 and C18:0) level and by decreasing unsaturated fatty acid (C18:1 and C18:2) level in cellular membrane. For fermentation at 40 °C with immobilized cells of K. marxianus, however, the changes were not observed in both saturated fatty acid (C16:0) and unsaturated fatty acid (C18:1 and C18:2) level.     

Colorimetric determination of copper(II) ions by filtration on sol-gel membrane doped with diphenylcarbazide

A simple and sensitive colorimetric method for the determination of trace copper(II) ions in aqueous solution has been developed using diphenylcarbazide (DPC) immobilized sol-gel matrices. To enhance the odds of chelating interactions between copper(II) ions and DPC, a peristaltic pump was utilized to drive copper(II) ions solution pass through the cellulose acetate/nitrate membrane, which was coated with DPC immobilized sol-gel matrices. The membrane was sandwiched in a home-made flow cell. The porous silica matrix serves as a preconcentrator, and enriches the trace copper(II) ions. Meanwhile, the filtration increases the chelating interaction probability between copper(II) ions and DPC, thereby improves the sensitivity significantly. After the formation of purple complex compound, the color changes of the DPC immobilized sol-gel membrane were recorded using a flatbed scanner. The images were digitized, and the red (R), green (G), and blue (B) values were investigated. The colorimetric method provides a rapid and reliable determination of trace copper(II) ions with a detection limit as low as 0.16 μM and a kinetic range up to 1.6 μM in neutral medium. Moreover, the method shows good selectivity, and the color changes of the DPC immobilized sol-gel membranes are remarkable for the copper(II) ions detection even in the presence of other metal ions.     

In situ formation and scanning electrochemical microscopy assisted positioning of NO-sensors above human umbilical vein endothelial cells for the detection of nitric oxide release

Pt microelectrodes (50 μm diameter) were positioned by means of scanning electrochemical microscopy assisted z-approach curves and in situ modified with nickel tetrasulfonated phthalocyanine tetrasodium salt as electrocatalytic layer for the specific oxidative detection of nitric oxide. The thus modified electrodes were then moved over a layer of adherently growing human umbilical vein endothelial cells (HUVEC) in order to amperometrically detect nitric oxide (NO) released from the cells upon stimulation with bradykinin. This approach actually takes advantage of the use of SECM to define a sequential procedure that enables the in situ functionalisation of the SECM tip thus allowing to accurately control the separation between the functionalised SECM tip and the cell population.