Selective extraction of the transplutonium and rare-earth elements by trioctylphosphine oxide

In the studies of nuclear reactions of heavy ions with heavy nuclei it is often necessary to determine the yields of TPE. Trioctylphosphine oxide (TOPO) has high selectivity with respect to trivalent TPE and rare earths. The possibility of using target or catcher materials as salting-out agents in the extraction of TPE with TOPO from solutions containing DTPA and lactic acid was investigated. The influence of the concentration of Pb, Bi, Cu, Ni, nitric acid and TOPO on the distribution coefficients was established. The advantages of application of the method for the extraction chromatographic separation of TPE and rare earths from the other elements produced in the interaction of ions with heavy elements are shown.     

A two-photon antenna for photochemical delivery of nitric oxide from a water-soluble, dye-derivatized iron nitrosyl complex using NIR light

The experiments described here demonstrate the use of two-photon excitation (TPE) to sensitize nitric oxide (NO) release from a dye-derivatized iron/sulfur/nitrosyl cluster Fe2(mu-RS)2(NO)4 (Fluor-RSE, RS = 2-thioethyl ester of fluorescein) with near-infrared (NIR) light in the form of femtosecond pulses from a Ti:sapphire laser. TPE at 800 nm leads both to weak fluorescence from the organic chromophore at lambda(max) = 532 nm and to NO labilization from the cluster. Since the emission from the reference compound Fluor-Et (the ethyl ester of fluorescein) under identical conditions (50/50 CH3CN/phosphate buffer (1 mM) at pH 7.4) is considerably more intense, the weaker emission from Fluor-RSE and the NO generation indicate that the fluorescein excited states initially formed by TPE are largely quenched by energy transfer to the cluster core. The two-photon absorption (TPA) cross section of Fluor-RSE at 800 nm was determined to be delta = 63 +/- 7 GM via the TPA photoluminescence technique. This can be compared to the TPA cross section of 36 GM reported for fluorescein dye in pH 11 aqueous solution and of 32 +/- 3 GM for Fluor-Et measured under conditions comparable to those used for Fluor-RSE. Pulse intensity dependence studies showed that the quantity of NO released from the latter as the result of NIR photoexcitation follows a quadratic relationship to excitation intensity, consistent with the expectation for a TPE process. These studies demonstrate the potential utility of a two-photon antenna for sensitization of the photochemical release of an active agent (in this case, NO) from a photoactive pro-drug.     

Isolation of transplutonium elements on ion exchangers from solutions of high salt concentration

The behaviour of transplutonium elements (TPE) on cation and anion exchangers in aqueous alcoholic solutions of chlorides and nitrates of some alkali and alkaline earth metals as depending on different factors: salt concentration, content of alcohol and of acid in the solution as well as the nature of a cation has been studied. The data obtained were used to determine the optimal conditions of concentration of TPE on ion exchangers from solutions containing great quantities of salts. The advantages of the use of aqueous alcoholic solutions of nitric acid in the isolation of TPE from such solutions have been shown.     

Separation of transplutonium elements on macroporous anionites via the use of aqueous-alcoholic solutions of a mixture of monocarbonic and nitric acids

The TPE behaviour on the strongly basic anionite Dowex-1×8 in aqueous—alcoholic solutions of lactic, butyric, iso-α-oxybutyric and α-oxyisobutyric acids in a mixture with nitric acid has been investigated. Distribution coefficients and separation factors of TPE have been determined depending on the content of various components of the mixture. High values of separation factors have been obtained for the pair Am-Cm (∼6) using mixtures of α-oxybutyric and nitric acids as eluents in aqueous—alcoholic solutions. The advantages of using macroporous anionites AB-1710P and AB-29P for TPE separation in such solutions are discussed.     

Use of alcoholic solutions for the isolation and purification of americium and curium with anion-exchangers

The sorption of transplutonium (TPE), rare-earth (RE) and other elements by anion-exchangers (Dowex 1 type) from aqueous alcoholic solutions of nitric acid and ammonium thiocyanate was investigated. This investigation allowed the development of simple and effective methods of americium—curium separation from frradiated plutonium. Plutonium, TPE (in a +3 oxidation state) and RE are firmly sorbed by the anion-exchanger from 1 M HNO₃ in 90% alcohol, Fe, Al and fission products Cs, Sr, Nb, Zr, and Ru pass through the column under these conditions. The RE separation from TPE is achieved by washing the column with 0.5M NH₄SCN in 80% alcohol. The column is then washed with 0.5 M HNO₃ in 85% alcohol, and americium—curium separation proceeds. Use of this method for recovery of an irradiated plutonium target containing 100 mg Pu, Am and Cm is described.     

NO和O2在Pt(110)面上吸附的TDS和PEEM研究

采用热脱附和光电子发射普微镜研究了Ｏ２和ＮＯ在Ｐｔ（１１０）面上的吸附和共吸附。结果表明，室温条件下，ＮＯ在Ｐｔ（１１０）面上有端式和桥式两种不同的吸附方式。Ｐｔ（１１０）表面预吸附的原子态氧占据了ＮＯ进入了桥式吸附的活性粒，从而阻遏了ＮＯ在Ｐｔ表面发生解离反应必须经过的桥式吸附中间态的形式，进而降低了ＮＯ在Ｐｔ表面直接分散的能力。     

Fabrication of Pyrene and Tetraphenylethylene Nanostructures by a Hydrolysis‐Assisted Co‐Assembly

The poly(allylamine hydrochloride)‐g‐pyrene‐tetraphenylethylene (PAH‐g‐Py‐g‐TPE) copolymers with different ratios of Py and TPE are synthesized by grafting 1‐pyrenecarboxaldehyde (Py‐CHO) and tetraphenylethylenecarboxaldehyde (TPE‐CHO) to PAH via a Schiff base reaction in methanol. The PAH‐g‐Py‐g‐TPE forms spherical micelles in water regardless of the ratios of Py and TPE, which can transform into different nanostructures after being incubated in pH 0 and pH 2 solutions, respectively. These nanomaterials including nanoparticles (NPs), nanorods (NRs), nanotubes (NTs) and nanoribbons (NBs) are composed of Py‐CHO and TPE‐CHO with different ratios, and emit fluorescence with colors different from the pure Py NRs and NTs, and TPE NPs.     

On the mechanism of the ascorbic acid-induced release of nitric oxide from N-nitrosated tryptophan derivatives: scavenging of NO by ascorbyl radicals

During the past years, there has been increasing interest in endogenous nitric oxide storage compounds. Recently, we briefly reported on the ascorbate-dependent release of nitric oxide ((.)NO) from N-nitrosotryptophan derivatives. In the present study, the underlying mechanism of (.)NO release is studied in more detail, primarily utilizing N-acetyl-N-nitrosotryptophan (NANT) as a model compound. The initial rate of the ascorbate-induced release of nitric oxide has been found to correspond to the rate of NANT decay. In this process, N-acetyltryptophan (NAT) is produced almost quantitatively. The final yield of nitrite amounted to around 90 % with respect to the applied amount of NANT. However, the total release of nitric oxide was only 60 %, as determined by using an FNOCT-4(fluorescent nitric oxide cheletropic trap number 4) assay. Besides nitric oxide, a second volatile product, dinitrogen oxide (N(2)O), has been identified by using (15)N NMR spectrometry, strongly indicating the intermediacy of nitroxyl (HNO). The formation of intermediate ascorbyl radical anions during the NANT-ascorbate reaction has been monitored by using ESR spectrometry. Unexpectedly, it was found that the primary oxidized product of vitamin C, dehydroascorbic acid (DHA), efficiently consumes nitric oxide. Since ESR spectrometry further revealed that ascorbyl radical anions are also generated during the spontaneous decay of DHA, the DHA-nitric oxide reaction is related to recombination of (.)NO with the thus formed ascorbyl radical anions. A conclusively established mechanism of the NANT-ascorbate reaction is presented, with O-nitrosoascorbate as a key intermediate, as additionally supported by CBS-QB3 calculations. The present study suggests that vitamin C and its oxidation products can chemically counterbalance endogenous nitric oxide levels.     

A 1,3‐Indandione‐Functionalized Tetraphenylethene: Aggregation‐Induced Emission,Solvatochromism, Mechanochromism,and Potential Application as a Multiresponsive Fluorescent Probe

A tetraphenylethene (TPE) derivative substituted with the electron‐acceptor 1,3‐indandione (IND) group was designed and prepared. The targeted IND‐TPE reserves the intrinsic aggregation‐induced emission (AIE) property of the TPE moiety. Meanwhile, owing to the decorated IND moiety, IND‐TPE demonstrates intramolecular charge‐transfer process and pronounced solvatochromic behavior. When the solvent is changed from apolar toluene to highly polar acetonitrile, the emission peak redshifts from 543 to 597 nm. IND‐TPE solid samples show an evident mechanochromic process. Grinding of the as‐prepared powder sample induces a redshift of emission from green (peak at 515 nm) to orange (peak at 570 nm). The mechanochromic process is reversible in multiple grinding–thermal annealing and grinding–solvent‐fuming cycles, and the emission of the solid sample switches between orange (ground) and yellow (thermal/solvent‐fuming‐treated) colors. The mechanochromism is ascribed to the phase transition between amorphous and crystalline states. IND‐TPE undergoes a hydrolysis reaction in basic aqueous solution, thus the red‐orange emission can be quenched by OH^? or other species that can induce the generation of sufficient OH^?. Accordingly, IND‐TPE has been used to discriminatively detect arginine and lysine from other amino acids, due to their basic nature. The experimental data are satisfactory. Moreover, the hydrolyzation product of IND‐TPE is weakly emissive in the resultant mixture but becomes highly blue‐emissive after the illumination for a period by UV light. Thus IND‐TPE can be used as a dual‐responsive fluorescent probe, which may extend the application of TPE‐based molecular probes in chemical and biological categories.     

A Versatile Naphthalimide–Sulfonamide‐Coated Tetraphenylethene: Aggregation‐Induced Emission Behavior,Mechanochromism, and Tracking Glutathione in Living Cells

A tetraphenylethene (TPE) derivative substituted with a sulfonyl‐based naphthalimide unit ( TPE‐Np ) was designed and synthesized. Its optical properties in solution and in the solid state were investigated. Photophysical properties indicated that the target molecule, TPE‐Np , possessed aggregation‐induced emission (AIE) behavior, although the linkage between TPE and the naphthalimide unit was nonconjugated. Additionally, it exhibited an unexpected, highly reversible mechanochromism in the solid state, which was attributed to the change in manner of aggregation between crystalline and amorphous states. On the other hand, a solution of TPE‐Np in a mixture of dimethyl sulfoxide/phosphate‐buffered saline was capable of efficiently distinguishing glutathione (GSH) from cysteine and homocysteine in the presence of cetyltrimethylammonium bromide. Furthermore, the strategy of using poly(ethylene glycol)–polyethylenimine (PEG‐PEI) nanogel as a carrier to cross‐link TPE‐Np to obtain a water‐soluble PEG‐PEI/ TPE‐Np nanoprobe greatly improved the biocompatibility, and this nanoprobe could be successfully applied in the visualization of GSH levels in living cells.     

Decomposition‐Assembly of Tetraphenylethylene Nanoparticles With Uniform Size and Aggregation‐Induced Emission property

Tetraphenylethylene (TPE)‐substituted poly(allylamine hydrochloride) (PAH‐g‐TPE) is synthesized by a Schiff base reaction between PAH and TPE‐CHO. The PAH‐g‐TPE forms micelles in water at pH 6, which are further transformed into pure TPE‐CHO nanoparticles (NPs) with a diameter of ≈300 nm after incubation in a solution of low pH value. In contrast, only amorphous precipitates are obtained when TPE‐CHO methanol solution is incubated in water. The aggregation‐induced emission feature of the TPE molecule is completely retained in the TPE NPs, which can be internalized into cells and show blue fluorescence. Formation mechanism of the TPE NPs is proposed by taking into account the guidance effect of linear and charged PAH molecules, and the propeller‐stacking manner between the TPE‐CHO molecules.     

Mitochondrial targeting of radioprotectants using peptidyl conjugates

Ionizing radiation activates a mitochondrial nitric oxide synthase, leading to inhibition of the respiratory chain, generation of excess superoxide, peroxynitrite production and nitrosative damage. We have measured the radioprotective effects of a nitric oxide synthase antagonist (AMT) versus a free radical scavenger (4-amino-TEMPO) using electrochemical detection of nitric oxide and peroxynitrite. To enhance their efficacy, we have conjugated these compounds to peptides and peptide isosteres--derived from the antibiotic gramicidin S--that target the mitochondria. The targeting ability of these peptidyl conjugates was measured using quantitative mass spectrometry.     

X型与线型嵌段聚醚在空气/水和正庚烷/水界面上聚集行为的比较研究

通过阴离子聚合方法合成了环氧乙烷(EO)含量和分子量均相同的线型聚氧丙烯(PEO)-聚氧乙烯(PPO) (LPE)和X型聚氧丙烯-聚氧乙烯(TPE)嵌段聚醚,考察了它们在空气/水及正庚烷/水界面上聚集行为的差异. 界面活性的研究结果表明,TPE降低水、正庚烷界面张力的效率和效能均低于LPE的. 聚醚分子在正庚烷/水界面达到吸附平衡的时间比在空气/水表面短. 由于正庚烷分子插入到聚醚吸附层中,聚醚分子可以在正庚烷/水界面上采取更为直立的状态,因此聚醚分子在正庚烷/水界面扩散较快. 聚醚在正庚烷/水界面的扩张弹性高于空气/水表面的.     

Optical Properties and Photo‐Oxidation of Tetraphenylethene‐Based Fluorophores

We report the optical properties of tetraphenylethene (TPE) and other TPE derivatives functionalised with an octyl group (TPE‐OCT) and polyethyleneglycol group (TPE‐PEG) in the side chain. We compared TPE‐OCT and TPE‐PEG with TPE in both organic solvents and under aqueous conditions. All materials exhibit aggregation‐induced emission, however, uncommonly, TPE‐PEG seems to aggregate in aqueous solution with enhanced photoluminescence quantum efficiency (PLQE) relative to that in organic solvents. All three materials can be photo‐oxidised in solution to their diphenylphenanthrene derivative by irradiation with UV light (at both ≈1 and ≈5 mW cm^?2), with a subsequent enhancement in PL efficiency. The electron‐donating ether group increases the rate of oxidation relative to bare TPE and also photo‐oxidation was shown to be solvent and concentration dependent. Finally, photo‐oxidation was also demonstrated in the aggregate state.     

Morphology and mechanical properties of binary triblock copolymer blends

The influence of the morphology on the mechanical properties of binary styrene–butadiene (SB) triblock copolymer blends of a thermoplastic block copolymer and a thermoplastic elastomer (TPE) with different molecular architectures was studied with bulk samples prepared from toluene. Both block copolymers contained SB random copolymer middle blocks, that is, the block sequence S–SB–S. The two miscible triblock copolymers were combined to create a TPE with increased tensile strength without a change in their elasticity. The changes in the equilibrium morphology of the miscible triblock copolymer blends as a function of the TPE content (lamellae, bicontinuous morphology, hexagonal cylinders, and worms) resulted in a novel morphology–property correlation: (1) the strain at break and Young's modulus of blends with about 20 wt % TPE were larger than those of the pure thermoplastic triblock copolymer; (2) at the transition from bicontinuous structures to hexagonal structures (～35 wt % TPE), a change in the mechanical properties from thermoplastic to elastomeric was observed; and (3) in the full range of wormlike and hexagonal morphology (60–100 wt % TPE), elastomeric properties were observed, the strength greatly increasing and high‐strength elastomers resulting. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 429–438, 2005     

担载型钴镍金属氧化物催化剂上CH4还原NO反应研究

ＮＯｘ是大气的主要污染物之一,近年来,利用甲烷选择还原ＮＯｘ引起了广泛关注,研究发现,Ｃｏ、Ｍｎ和Ｎｉ离子交换的ＺＳＭ－５分子筛具有较高的活性［１～３］．但金属离子交换的分子筛催化剂有热稳定性差、易失活等缺点．最近已有金属氧化物用作甲烷还原ＮＯｘ反应...     

Color-tunable and Highly Emissive Solid Materials Constructed from Tetraphenylethylene-o-carborane-based Building Blocks: Synthesis,Aggregation-induced emission,and Photophysics

A novel kind of expanded tetraphenylethylene (TPE)-carborane-TPE pentad has been synthesized by using two adjacent carborane moieties as central bridges and three TPE units in lateral positions. Its solid-state fluorescence quantum yield was substantially increased to 68.2% by expanding the number of bridges between carborane and TPE. Subsequently, the emission color shifted from blue to orange-yellow (126 nm). Mechanical insights into the electronic structure of the extended TPE-carborane-TPE pentads were obtained from density functional theory (DFT) calculations.     

Tetraphenylethylene‐based Glycoconjugate as a Fluorescence “Turn‐On” Sensor for Cholera Toxin

Tetraphenylethylene (TPE)‐based glycoconjugates were easily synthesized by copper(I)‐catalyzed “click reactions” between propargyl‐attached TPE and azido‐functionalized sugars. The TPE compound bearing lactosyl moieties ( Lac‐TPE ) was found to be a fluorescence “turn‐on” sensor for cholera toxin by virtue of aggregation‐induced emission characteristics of the TPE motif owing to the specific interaction of lactose with the cholera toxin B subunit, whilst a cellobiose‐functionalized TPE derivative did not show any response to the toxin. Therefore, Lac‐TPE shows promising applications in the detection of cholera toxin, as well as in the investigation of carbohydrate–protein interaction.     

A study of the reactive intermediate IF and I atoms with photoelectron spectroscopy

Angle-resolved photoelectron (PE) spectra were recorded for IF and I. These were prepared as primary and secondary products of the F + CH2I2 reaction. PE spectra were recorded with different IF-to-I ratios to evaluate the relative intensities of IF and I photoelectron bands where their bands were overlapped. Improved values were obtained for the vertical and adiabatic ionization energies of the IF(+)(X(2)Pi(3/2)) <-- IF(X(1)sigma(+)) and IF(+)((2)Pi(1/2)) <-- IF(X(1)sigma(+)) ionizations and for the spectroscopic constants omega(e) and omega(e)ex(e) for the two IF ionic states X(2)Pi(3/2) and (2)Pi(1/2). Equilibrium bond lengths r(e) of these IF ionic states were derived from the experimental relative intensities of the vibrational components and calculated Franck-Condon factors. Threshold photoelectron (TPE) spectra were also recorded under the same reaction conditions. On comparing the TPE and PE spectra, the contributions from atomic iodine were much more intense in the TPE spectra. No difference was seen between the vibrational envelopes of the two observed IF bands, and no extra structure was seen associated with the TPE bands of IF as has been observed in TPE spectra of other diatomic halogens. The extra features that were observed in the TPE spectra can be assigned to contributions from autoionization of known I Rydberg states.