KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

The preparation of NbH5(Me2PCH2CH2Me2)2 and NbHL2(Me2PCH2CH2PMe2)2 (L = CO or C2H4)

MMe₅(dmpe) (M = Nb or Ta, dmpe = Me₂PCH₂CH₂PMe₂) reacts with H₂ (500 atm) and dmpe in THF at 60°C to give MH₅(dmpe)_2? NbH₅(dmpe)₂ readily reacts with two mol of CO or ethylene (L) to give NbHL₂(dmpe)₂. The exchange of the hydride ligand with the ethylene protons in NbH(C₂H₄)₂(dmpe)₂ is not rapid on the ¹H NMR time scale (60 MHz) at 95°C.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

NaBO2-NaCl-Na2CO3, NaBO2- Na2CO3-NaMoO4, NaBO2- Na2CO3-NaWO4, and NaBO2-NaCl-Na2WO4 ternary systems

The phase diagrams of the NaBO₂-NaCl-Na₂CO₃, NaBO₂-Na₂CO₃-Na₂MoO₄, NaBO₂- Na₂CO₃-Na₂WO₄, and NaBO₂-NaCl-Na₂WO₄ ternary systems were studied by a calculation-experimental method and differential thermal analysis. The coordinates of ternary eutectics were determined: E ₁: 612°C, 16 mol % NaBO₂, 42 mol % NaCl, and 42 mol % Na₂CO₃; E ₂: 568°C, 12 mol % NaBO₂, 28 mol % Na₂CO₃, and 60 mol % Na₂MoO₄; E ₃: 575°C, 12 mol % NaBO₂, 32 mol % Na₂CO₃, and 56 mol % Na₂WO₄; E ₄: 628°C, 8 mol % NaBO₂, 20 mol % NaCl, and 72 mol % Na₂WO₄; and E ₅: 655°C, 9 mol % NaBO₂, 53 mol % NaCl, and 38 mol % Na₂WO₄.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

(H2NC4H8NCH2CH2NH2)(HNCH2CH2NH2)3Zn2Ge2Se8: A new,templated one-dimensional ternary semiconductor stabilized by mixed organic cations

The novel, 1D semiconductor (H₂NC₄H₈NCH₂CH₂NH₂)(HNCH₂CH₂NH₂)₃Zn₂Ge₂Se₈ has been synthesized under solvothermal conditions using N-(2-aminoethyl)piperazine as solvent and templating agent at 200 °C. The material was characterized by single crystal and powder X-ray diffraction, IR and Raman spectroscopy and thermogravimetric analysis. The compound consists of 1D anionic [Zn₂Ge₂Se₈]⁴⁻ chains made of alternating edge-shared [ZnSe₄] and [GeSe₄] tetrahedra that charged balanced by one N-(2-aminoethyl)piperazinium and three piperazinium cations. The optical properties were investigated with solid state UV–Vis/near IR spectroscopy and the results show that the solid is a medium gap semiconductor with an absorption edge at 1.8 eV.     

Polymorphism in the Sc2Si2O7-Y2Si2O7 system

This paper examines the structural changes with temperature and composition in the Sc₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Y₂O₃ and Sc₂O₃ mixtures. A set of different compositions have been synthesized using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1750 °C during different times. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing very reduced stability fields. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of the components. Although, the XRD data show a complete solid solubility of β-Sc₂Si₂O₇ in β-Y₂Si₂O₇ at 1300 °C, the ²⁹Si MAS-NMR spectra indicate a local structural change at x ca. 1.15 (Sc_2−xY_xSi₂O₇) related to the configuration of the Si tetrahedron, which does not affect the long-range order of the β-RE₂Si₂O₇ structure. Finally, it is interesting to note that, although Sc₂Si₂O₇ shows a unique stable polymorph (β), Sc³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ in the compositional range 1.86?x?2 (where x is Sc_2−xY_xSi₂O₇) as well as in δ-Y₂Si₂O₇ for compositions much closer to the pure Y₂Si₂O₇.     

Synthesis and characterization of inorganic solid electrolytes of Li2O-SiO2-P2O5 and Li2O-TiO2-SiO2-P2O5 systems

The lithium-ion-conducting inorganic solid electrolytes in the oxide systems Li₂O-SiO₂-P₂O₅ and Li₂O-TiO₂-SiO₂-P₂O₅ were prepared by the solid-state reaction, and the electrolyte pellet made by cold-pressing method had diameter of 13 mm and was about 1 mm thick. Phase identification and surface morphology of the products were carried out by X-ray diffraction and scanning electron microscopy. Ionic conductivity of the pellets was investigated through ac impedance. The results show that the adding of other cations can improve the ionic conductivity of the solid electrolyte, and the sintering temperature and duration can influence the ionic conductivity. The maximum ionic conductivity in the samples is 9.9 × 10⁻⁴ S/cm in the Li₂O-TiO₂-SiO₂-P₂O₅ system. Original Russian Text ? W. Li, M. Wang, Z.H. Li, X.F. Shang, H. Wang, Y.W. Wang, Y.B. Xu, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 11, pp. 1341–1345.     

Ag2Se-Tl2Se-Bi2Se3 quasi-ternary system

The Ag₂Se-Tl₂Se-Bi₂Se₃ quasi-ternary system (system A) was studied using DTA, X-ray powder diffraction, microstructure examination, and microhardness measurements. TlBiSe₂-AgBiSe₂, AgTlSe-AgBiSe₂, AgTlSe-Bi₂Se₃, and Tl₂Se-AgBiSe₂ polytherms, isothermal sections at 500 and 800 K, and liquidus surface projection of system A were constructed. System A is congruently triangulated into the following subordinate triangles: Tl₂Se-AgTlSe-Tl₉BiSe₆ (I), AgTlSe-Tl₉BiSe₆-TlBiSe₂ (II), Ag₂Se-AgTlSe-TlBiSe₂ (III), Ag₂Se-AgBiSe₂-TlBiSe₂ (IV), and AgBiSe₂-TlBiSe₂-Bi₂Se₃ (V). Subsystems I, III, and V are ternary systems with three-phase eutectic equilibrium; system II has a three-phase eutectic, and system IV is characterized by several invariant and monovariant peritectic and eutectic equilibria. Primary crystallization and homogeneity fields were outlined, and the types and coordinates of invariant and monovariant equilibria in system A were determined. A characteristic feature of the title system is an extensive field of solid solutions between high-temperature cubic AgBiSe₂ and TlBiSe₂ phases; this field lies as a continuous belt along the AgBiSe₂-TlBiSe₂ quasibinary section and covers about one-fourth of the surface area of the triangular diagram of system A.     

Tl2S-Sb2S3-Bi2S3 quasi-ternary system

The Tl₂S-Sb₂S₃-Bi₂S₃ quasi-ternary system (system A) was studied using DTA, X- ray powder diffraction, microstructure examination, and microhardness measurements. TlSbS₂-Tl₄Bi₂S₅(TlBiS₂, Bi₂S₃), Sb₂S₃-TlBiS₂, Tl₃SbS₃-TlBiS₂(Bi₂S₃), and [TlSb_0.5Bi_0.5S₂]-Tl₂S isopleths; isothermal sections at 500 K; and liquidus surface projection of system A were constructed. Characteristic features of the title system are extensive fields of solid solutions extended along the TlSbS₂-TlBiS₂ quasi-binary section and a continuous solubility belt 1–2 mol % wide extended along the Sb₂S₃-Bi₂S₃ binary subsystem. Primary separation fields of phases and the types and coordinates of invariant and monovariant equilibria in system A were determined.     

Formation of [Cp2TiSbMe2]2, [Cp2TiSb(SiMe3)2]2 and [Cp2TiCl]2·2Mes4Sb2

Reactions of [Cp₂Ti(btmsa)] (btmsa = bis(trimethylsilyl)acetylene) with R₄Sb₂ (R = Me, Me₃Si) give [Cp₂TiSbMe₂]₂ (1) or [Cp₂TiSb(SiMe₃)₂]₂ (2) respectively. [Cp₂TiCl]₂·2Mes₄Sb₂ (3) is serendipitously formed from [Cp₂Ti(btmsa)] and Mes₂SbH containing NH₄Cl traces.     

Some studies on the solid solutions in the systems Sr2Nb2O7Eu2Nb2O7 and Sr2Ta2O7Eu2Ta2O7

Preparation of new solid solutions containing divalent europium have been tried in the systems Eu₂Nb₂O₇Sr₂Nb₂O₇ and Eu₂Ta₂O₇Sr₂Ta₂O₇. These solid solutions described as Eu_2xSr_2(1?x)M₂O₇ (M = Nb and Ta) exist in a pure orthorhombic phase in a limited region of x from 0 to about 0.5. The compounds with compositions close to Eu₂M₂O₇ exist but techniques have not been found to prepare them in pure form.     

Phase equilibria and glass formation in the As2S3-TlAs2S2Se2 section of the As2S3-As2Se3-TlS system

Alloys in the As₂S₃-TlAs₂S₂Se₂ section of the As₂S₃-As₂Se₃-TlS ternary system were studied and a phase diagram was constructed using physicochemical methods (differential thermal analysis, microstructural analysis, X-ray powder diffraction, also microhardness and density measurements). The diagram in the As₂S₃-TlAs₂S₂Se₂ section is a non-quasi-binary diagonal section of the As₂S₃-As₂Se₃-TlSe quasi-ternary system. It was found that all the alloys in the section under ordinary conditions are obtained in the vitreous state. At low As₂S₃ concentrations in the section, solid solutions form up to 2.5 mol %, and at low TlAs₂S₂Se₂ concentrations, their extent is 3 mol %.     

Li2O-Na2O-B2O3-SiO2烧结助剂对BaAl2Si2O8陶瓷结构与介电性能的影响

采用传统固相反应工艺,按化学计量比合成BaO-Al_2O3-SiO_2(BAS)-x%(w/w) Li_2O-Na_2O-B_2O3-SiO_2(LNBS)(x=0,1,2,3,4)陶瓷。研究不同LNBS烧结助剂添加量对BAS系微波介质陶瓷的结构和介电性能的影响。通过Clausius-Mossotti公式计算讨论了BAS理论与实验介电常数(εr)的差异。研究结果表明:LNBS烧结助剂中Li+进入钡长石Al3+位或单四元环(S4R)间隙,并产生了O_2-空位或Ba2+空位,从而促进BAS六方相向单斜相的转变。添加适量的LNBS烧结助剂后,BAS陶瓷的烧结温度从1 400℃降低到1 325℃,同时BAS陶瓷样品密度、品质因数(Qf)值以及频率温度系数(τf)得到改善。当x=1,烧结温度为1 325℃时,可获得综合性能相对较好的BAS陶瓷,其介电性能:Qf=35 199 GHz,εr=6.37,τf=-1.613×10-5℃-1。     

Slow energy transfer between vibrational models of CH2Cl2, CD2Cl2, CH2ClBr and CH2Br2

Inefficient vibrational energy exchange between the lowest vibrational mode and the higher lying vibrational modes of CH₂Cl₂, CD₂Cl₂, CH₂ClBr and CH₂Br₂ was investigated by ultrasonic absorption experiments. Breathing sphere theory is used to interpret the data available for VV and VR, T transfer in methylene halides.     

Cu-MOF催化过氧化氢应用于多巴胺的检测

本文利用一种具有H_2O_2催化活性的Cu-MOF[Cu_3(BTC)_2(H_2O)_3,简称HKUST-1],构建了以邻苯二胺(OPD)为颜色指示分子的比色传感体系,实现了对H_2O_2和多巴胺(DA)的快速灵敏检测。HKUST-1起到催化H_2O_2氧化OPD的作用,反应体系能够呈现出显著的颜色变化。在优化条件下,415nm处的吸收峰强度与H_2O_2浓度呈双线性关系,线性范围分别为10~50 mmol/L和50~100 mmol/L,相对标准偏差分别为0.9947和0.9995,最低检出限为1.29mmol/L。由于DA能抑制H_2O_2氧化OPD,因此比色传感体系还可以用于快速检测DA,线性范围分别为0.25~5μmol/L和2.5~25μmol/L,相对标准偏差分别为0.9783和0.9705,最低检出限为0.262μmol/L。该项工作拓展了Cu-MOFs材料在生物分子催化和生物传感方面的应用。     

Li2O-Al2O3-GeO2-P2O5微晶玻璃的微观结构和离子电导率

采用传统熔体冷却法制备了Li3-xAl2-xGex(PO4)3(x=1.1~1.9)体系玻璃,并通过热处理工艺获得了高电导率的微晶玻璃。通过XRD、TEM和交流阻抗等测试方法,研究了该系微晶玻璃的物相组成、微观形貌和锂离子电导率。结果表明:该系统微晶玻璃析出导电主晶相为LiGe2(PO4)3,杂质相为AlPO4和GeO2。当x=1.5时,由于导电主晶相LiGe2(PO4)3晶粒充分长大、分布均匀,所制备微晶玻璃的室温锂离子电导率最高(5.72×10-4 S.cm-1),可以满足全固态锂离子电池对电解质高室温电导率的要求。     

High-pressure silicate pyrochlores,Sc2Si2O7 and In2Si2O7

The silicate compounds Sc₂Si₂O₇ and In₂Si₂O₇ have been converted from thortveitite type to pyrochlore type at 1000°C, 120 kbar, with resulting cell constants of 9.287(3) and 9.413(3) Å, respectively. Invariant reflection intensities in the X-ray powder diffraction patterns allowed precise absorption corrections to be made, and refinement of thermal parameters and of the single structural parameter x gave values of 0.4313(21) and 0.4272(15), respectively. The corresponding six-coordinate SiO distances were 1.761(7) and 1.800(5) Å, and the average eight-coordinate distances for ScO₈ and InO₈ were 2.267 and 2.275 Å. Values of structure-refined bond lengths for compounds containing six-coordinate silicon are surveyed, and overall weighted average octahedral distances of 1.782(14) Å for SiO and 2.520(18) Å for OO are derived. Pyrochlore phases were not produced from rare-earth disilicate or monosilicate phases subjected to the same reaction conditions as the Sc and In compounds.     

富勒烯配合物C60Pd(Ph2PCH2CH2CH2CH2PPh2)的合成和光电性能

本文在惰性气氛中通过取代反应合成出富勒烯金属配合物C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)，采用元素分析、红外光谱、紫外可见光谱、光电子能谱以及X射线粉末衍射等手段对产物进行表征,同时研究了产物的氧化还原性能及热稳定性能。此外，在光电化学电池中测定了C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)在GaAs电极上形成n+n型异质结的光伏效应，结果表明：产物具有优良的光电转化性能，尤其是在BQ/H2Q介质电对中，光生电压最大达到212 mV；当C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)薄膜厚度为1 μm时，光伏效应值最大。