The Intrinsic Mechanochemical Reactivity of Vinyl‐Addition Polynorbornene

Herein we report the discovery of the intrinsic mechanochemical reactivity of vinyl‐addition polynorbornene (VA‐PNB), which has strained bicyclic ring repeat units along the polymer backbone. VA‐PNBs with three different side chains were found to undergo ring‐opening olefination upon sonication in dilute solutions. The sonicated polymers exhibited spectroscopic signatures consistent with conversion of the bicyclic norbornane repeat units into the ring‐open isomer typical of polynorbornene made by ring‐opening metathesis polymerization (ROMP‐PNB). Thermal analysis and evaluation of chain‐scission kinetics suggest that sonication of VA‐PNB results in chain segments containing a statistical mixture of vinyl‐added and ROMP‐type repeat units.     

Nickel-catalyzed skeletal transformation of tropone derivatives via C–C bond activation: catalyst-controlled access to diverse ring systems

We report herein on nickel-catalyzed carbon–carbon bond cleavage reactions of 2,4,6-cycloheptatrien-1-one (tropone) derivatives. When a Ni/N-heterocyclic carbene catalyst is used, decarbonylation proceeds with the formation of a benzene ring, while the use of bidentate ligands in conjunction with an alcohol additive results in a two-carbon ring contraction with the generation of cyclopentadiene derivatives. The latter reaction involves a nickel–ketene complex as an intermediate, which was characterized by X-ray crystallography. The choice of an appropriate ligand allows for selective synthesis of four different products via the cleavage of a seven-membered carbocyclic skeleton. Reaction mechanisms and ligand-controlled selectivity for both types of ring contraction reactions were also investigated computationally.

We report on C–C bond cleavage reactions of tropone derivatives by nickel catalysis. A single tropone derivative can be diversified into four different products with different ring skeletons by the judicious choice of the ligand.     

Vinyl polymerization of norbornene with nickel catalysts bearing [N,N] six-membered chelate ring: Important influence of ligand structure on activity

Norbornene polymerizations with nickel complexes bearing [N,N] six-membered chelate ring activated with methylaluminoxane were investigated. The influence of ligand structure such as β-diimine, β-diketiminate, fluorinated β-diketiminate, and anilido-imine ligand on catalytic activities for norbornene polymerization was evaluated in detail. Ligands led to different electrophilicity of the nickel metal center, and a relatively positive nickel metal center would result in high catalytic activities for norbornene polymerization. The influences of polymerization temperature and Al/Ni ratio on norbornene polymerization with nickel catalysts bearing β-diimine, β-diketiminate, and fluorinated β-diketiminate ligands were also examined. All of the obtained polymers catalyzed by these nickel catalysts bearing [N,N] ligand are vinylic addition polynorbornenes with different molecular weights.     

Vinylic polymerization by homogeneous chromium(III) catalysts

A new class of homogeneous chromium(III)-based catalysts of the type [Cp*CrMeCl]₂/MAO with different kinds of Cp ligands has been synthesized. The influence of the electronic nature and the sterical demand of the catalysts were explored with regard to the vinylic polymerization of norbornene. The catalyst activity could be increased by intensifying the electron-donating character of the Cp ligand, whereas the sterical demand of the Cp ligand affects the crystallinity of the obtained polynorbornene. In order to improve their processability, copolymers of norbornene with ethene were made using the [Cp*CrMeCl]₂/MAO catalyst, which led to copolymers with a high α-olefin content. Furthermore, highly linear, ultra-high molecular weight polyethylene was obtained using the new class of chromium(III)-based catalysts.     

Vinylic polymerization of norbornene by Pd(II)-catalysis in the presence of ethylene

Pd(II) catalysts with nitrilo ligands and BF₄⁻ counter ions give the best results in vinylic polymerization of norbornene. Absolute molecular weight determination of polynorbornene (PN) by means of light scattering and the three-dimensional shape of PN were also investigated. By correlation of molecular weights M̄_w with intrinsic viscosity (Staudinger-index) [η], yield a close to 0.5 exponent for the Mark-Houwink equation with solvents chlorobenzene and cyclohexane at 25°C expected for polymer molecules with confined conformation. The vinylic polymerization of norbornene with [(CH₃CN)₄Pd][BF₄]₂ ( I ) in nitromethane in the presence of ethylene results in PN with narrow molecular weight distribution. No termination and transfer reactions were found, nor any incorporation of ethylene could be detected.     

Rh(iii)-Catalyzed [5 + 1] annulation of 2-alkenylanilides and 2-alkenylphenols with allenyl acetates

Herein, we report a mild and highly regioselective Rh(iii)-catalyzed non-oxidative [5 + 1] vinylic C–H annulation of 2-alkenylanilides with allenyl acetates, which has been elusive so far. The reaction proceeds via vinylic C–H activation, regioselective 2,3-migratory insertion, β-oxy elimination followed by nucleophilic cyclization to get direct access to 1,2-dihydroquinoline derivatives. The strategy was also successfully extended to C–H activation of 2-alkenylphenols for constructing chromene derivatives. In the overall [5 + 1] annulation, the allene serves as a one carbon unit. The acetate group on the allene is found to be crucial both for controlling the regio- and chemoselectivity of the reaction and also for facilitating β-oxy elimination. The methodology was scalable and also further extended towards late stage functionalization of various natural products.

A highly regioselective Rh(iii)-catalyzed non-oxidative [5 + 1] vinylic C–H annulation of 2-alkenylanilides and 2-alkenylphenols with allenyl acetates was described for accessing dihyroquinoline and chromene derivatives.     

Nickel/Brønsted acid dual-catalyzed regio- and enantioselective hydrophosphinylation of 1,3-dienes: access to chiral allylic phosphine oxides

While chiral allylic organophosphorus compounds are widely utilized in asymmetric catalysis and for accessing bioactive molecules, their synthetic methods are still very limited. We report the development of asymmetric nickel/Brønsted acid dual-catalyzed hydrophosphinylation of 1,3-dienes with phosphine oxides. This reaction is characterized by an inexpensive chiral catalyst, broad substrate scope, and high regio- and enantioselectivity. This study allows the construction of chiral allylic phosphine oxides in a highly economic and efficient manner. Preliminary mechanistic investigations suggest that the 1,3-diene insertion into the chiral Ni–H species is a highly regioselective process and the formation of the chiral C–P bond is an irreversible step.

Asymmetric hydrophosphinylation of 1,3-dienes with phosphine oxides using an inexpensive chiral catalyst has been demonstrated, providing access to chiral allylic phosphine oxides with broad substrate scope and high regio- and enantioselectivity.     

Ring-opening fluorination of bicyclic azaarenes

We have discovered a ring-opening fluorination of bicyclic azaarenes. Upon treatment of bicyclic azaarenes such as pyrazolo[1,5-a]pyridines with electrophilic fluorinating agents, fluorination of the aromatic ring is followed by a ring-opening reaction. Although this overall transformation can be classified as an electrophilic fluorination of an aromatic ring, it is a novel type of fluorination that results in construction of tertiary carbon–fluorine bonds. The present protocol can be applied to a range of bicyclic azaarenes, tolerating azines and a variety of functional groups. Additionally, mechanistic studies and enantioselective fluorination have been examined.

A ring-opening fluorination of bicyclic azaarenes was developed. Although this overall transformation can be classified as an electrophilic fluorination of aromatics, it is a novel type of fluorination that results in construction of tert-C–F bonds.     

Ligand-field transition-induced C–S bond formation from nickelacycles

Photoexcitation is one of the acknowledged methods to activate Ni-based cross-coupling reactions, but factors that govern the photoactivity of organonickel complexes have not yet been established. Here we report the excited-state cross-coupling activities of Ni(ii) metallacycle compounds, which display ∼10⁴ times enhancement for the C–S bond-forming reductive elimination reaction upon Ni-centered ligand-field transitions. The effects of excitation energy and ancillary ligands on photoactivity have been investigated with 17 different nickelacycle species in combination with four corresponding acyclic complexes. Spectroscopic and computational electronic structural characterizations reveal that, regardless of coordinated species, d–d transitions can induce Ni–C bond homolysis, and that the reactivity of the resulting Ni(i) species determines the products of the overall reaction. The photoactivity mechanism established in this study provides general insights into the excited-state chemistry of organonickel(ii) complexes.

d–d excitations can accelerate C–S reductive eliminations of nickelacycles via intersystem crossing to a repulsive ³(C-to-Ni charge transfer) state inducing Ni–C bond homolysis. This homolytic photoreactivity is common for organonickel(ii) complexes.     

Single-crystal-to-single-crystal synthesis of a pseudostarch via topochemical azide–alkyne cycloaddition polymerization

There is high demand for polysaccharide-mimics as enzyme-stable substitutes for polysaccharides for various applications. Circumventing the problems associated with the solution-phase synthesis of such polymers, we report here the synthesis of a crystalline polysaccharide-mimic by topochemical polymerization. By crystal engineering, we designed a topochemically reactive crystal of a glucose-mimicking monomer decorated with azide and alkyne units. In the crystal, the monomers arrange in head-to-tail fashion with their azide and alkyne groups in a ready-to-react antiparallel geometry, suitable for their topochemical azide–alkyne cycloaddition (TAAC) reaction. On heating the crystals, these pre-organized monomer molecules undergo regiospecific TAAC polymerization, yielding 1,4-triazolyl-linked pseudopolysaccharide (pseudostarch) in a single-crystal-to-single-crystal manner. This crystalline pseudostarch shows better thermal stability than its amorphous form and many natural polysaccharides.

Prudent crystal engineering allows head-to-tail arrangement of inositol monomer molecules pre-organizing azide and alkyne units of adjacent monomers in a ready-to-react manner. On heating regiospecific SCSC polymerization yields a starch-like polymer.     

DFT insight into asymmetric alkyl–alkyl bond formation via nickel-catalysed enantioconvergent reductive coupling of racemic electrophiles with olefins

A DFT study has been conducted to understand the asymmetric alkyl–alkyl bond formation through nickel-catalysed reductive coupling of racemic alkyl bromide with olefin in the presence of hydrosilane and K₃PO₄. The key findings of the study include: (i) under the reductive experimental conditions, the Ni(ii) precursor is easily activated/reduced to Ni(0) species which can serve as an active species to start a Ni(0)/Ni(ii) catalytic cycle. (ii) Alternatively, the reaction may proceed via a Ni(i)/Ni(ii)/Ni(iii) catalytic cycle starting with a Ni(i) species such as Ni(i)–Br. The generation of a Ni(i) active species via comproportionation of Ni(ii) and Ni(0) species is highly unlikely, because the necessary Ni(0) species is strongly stabilized by olefin. Alternatively, a cage effect enabled generation of a Ni(i) active catalyst from the Ni(ii) species involved in the Ni(0)/Ni(ii) cycle was proposed to be a viable mechanism. (iii) In both catalytic cycles, K₃PO₄ greatly facilitates the hydrosilane hydride transfer for reducing olefin to an alkyl coupling partner. The reduction proceeds by converting a Ni–Br bond to a Ni–H bond via hydrosilane hydride transfer to a Ni–alkyl bond via olefin insertion. On the basis of two catalytic cycles, the origins for enantioconvergence and enantioselectivity control were discussed.

The enantioconvergent alkyl–alkyl coupling involves two competitive catalytic cycles with nickel(0) and nickel(i) active catalysts, respectively. K₃PO₄ plays a crucial role to enable the hydride transfer from hydrosilane to nickel–bromine species.     

Synthesis, characterization and olefin polymerization of the nickel catalysts supported by [N,S] ligands

The novel nickel (II) complexes (2a, 2b) bearing 1-pyridyl-(3-substituedimidazole-2-thione) ligands were synthesized by the reaction of the corresponding ligands with NiBr₂(DME). 2a and 2b have been characterized by IR, NMR and elemental analysis. The nickel complexes show high catalytic activities for norbornene polymerization in the presence of MAO (methylaluminoxane), although low activities for ethylene polymerization.     

Picomolar FKBP inhibitors enabled by a single water-displacing methyl group in bicyclic [4.3.1] aza-amides

Methyl groups can have profound effects in drug discovery but the underlying mechanisms are diverse and incompletely understood. Here we report the stereospecific effect of a single, solvent-exposed methyl group in bicyclic [4.3.1] aza-amides, robustly leading to a 2 to 10-fold increase in binding affinity for FK506-binding proteins (FKBPs). This resulted in the most potent and efficient FKBP ligands known to date. By a combination of co-crystal structures, isothermal titration calorimetry (ITC), density-functional theory (DFT), and 3D reference interaction site model (3D-RISM) calculations we elucidated the origin of the observed affinity boost, which was purely entropically driven and relied on the displacement of a water molecule at the protein–ligand–bulk solvent interface. The best compounds potently occupied FKBPs in cells and enhanced bone morphogenic protein (BMP) signaling. Our results show how subtle manipulation of the solvent network can be used to design atom-efficient ligands for difficult, solvent-exposed binding pockets.

Enhancement by displacement. A single methyl group displaces a water molecule from the binding site of FKBPs, resulting in the most potent binders known, outperforming the natural products FK506 and rapamycin in biochemical and cellular assays.     

Ni(0)-promoted activation of Csp2–H and Csp2–O bonds

A dinickel(0)–N₂ complex, stabilized with a rigid acridane-based PNP pincer ligand, was studied for its ability to activate C(sp²)–H and C(sp²)–O bonds. Stabilized by a Ni–μ–N₂–Na⁺ interaction, it activates C–H bonds of unfunctionalized arenes, affording nickel–aryl and nickel–hydride products. Concomitantly, two sodium cations get reduced to Na(0), which was identified and quantified by several methods. Our experimental results, including product analysis and kinetic measurements, strongly suggest that this C(sp²)–H activation does not follow the typical oxidative addition mechanism occurring at a low-valent single metal centre. Instead, via a bimolecular pathway, two powerfully reducing nickel ions cooperatively activate an arene C–H bond and concomitantly reduce two Lewis acidic alkali metals under ambient conditions. As a novel synthetic protocol, nickel(ii)–aryl species were directly synthesized from nickel(ii) precursors in benzene or toluene with excess Na under ambient conditions. Furthermore, when the dinickel(0)–N₂ complex is accessed via reduction of the nickel(ii)–phenyl species, the resulting phenyl anion deprotonates a C–H bond of glyme or 15-crown-5 leading to C–O bond cleavage, which produces vinyl ether. The dinickel(0)–N₂ species then cleaves the C(sp²)–O bond of vinyl ether to produce a nickel(ii)–vinyl complex. These results may provide a new strategy for the activation of C–H and C–O bonds mediated by a low valent nickel ion supported by a structurally rigidified ligand scaffold.

A structurally rigidified nickel(0) complex was found to be capable of cleaving both C(sp²)–H and C(sp²)–O bonds.     

Stereoregular functionalized polysaccharides via cationic ring-opening polymerization of biomass-derived levoglucosan

We report the facile synthesis and characterization of 1,6-α linked functional stereoregular polysaccharides from biomass-derived levoglucosan via cationic ring-opening polymerization (cROP). Levoglucosan is a bicyclic acetal with rich hydroxyl functionality, which can be synthetically modified to install a variety of pendant groups for tailored properties. We have employed biocompatible and recyclable metal triflate catalysts – scandium and bismuth triflate – for green cROP of levoglucosan derivatives, even at very low catalyst loadings of 0.5 mol%. Combined experimental and computational studies provided key kinetic, thermodynamic, and mechanistic insights into the cROP of these derivatives with metal triflates. Computational studies reveal that ring-opening of levoglucosan derivatives is preferred at the 1,6 anhydro linkage and cROP proceeds in a regio- and stereo-specific manner to form 1,6-α glycosidic linkages. DFT calculations also show that biocompatible metal triflates efficiently coordinate with levoglucosan derivatives as compared to the highly toxic PF₅ used previously. Post-polymerization modification of levoglucosan-based polysaccharides is readily performed via UV-initiated thiol–ene click reactions. The reported levoglucosan based polymers exhibit good thermal stability (T_d > 250 °C) and a wide glass transition temperature (T_g) window (<−150 °C to 32 °C) that is accessible with thioglycerol and lauryl mercaptan pendant groups. This work demonstrates the utility of levoglucosan as a renewably-derived scaffold, enabling facile access to tailored polysaccharides that could be important in many applications ranging from sustainable materials to biologically active polymers.

We demonstrate the facile synthesis and characterization of stereoregular polysaccharides from the biomass-derived platform molecule levoglucosan via metal-triflate mediated cationic-ring opening polymerization.     

Synthesis of Amines from Norbornane Series

Synthetic procedure was developed for preparation of exo-oriented di- and tetraamines of the norbornane series by 1,3-dipolar cycloaddition to norbornene and norbornadiene of generated in situ diazomethane followed by reduction of arising pyrazolines catalyzed by Raney nickel.     

Fluorescent supramolecular polymers of barbiturate dyes with thiophene-cored twisted π-systems

Because supramolecular polymerization of emissive π-conjugated molecules depends strongly on π–π stacking interaction, the formation of well-defined one-dimensional nanostructures often results in a decrease or only a small increase of emission efficiency. This is also true for our barbiturate-based supramolecular polymers wherein hydrogen-bonded rosettes of barbiturates stack quasi-one-dimensionally through π–π stacking interaction. Herein we report supramolecular polymerization-induced emission of two regioisomeric 2,3-diphenylthiophene derivatives functionalized with barbituric acid and tri(dodecyloxy)benzyl wedge units. In CHCl₃, both compounds are molecularly dissolved and accordingly poorly emissive due to a torsion-induced non-radiative decay. In methylcyclohexane-rich conditions, these barbiturates self-assemble to form crystalline nanofibers and exhibit strongly enhanced emission through supramolecular polymerization driven by hydrogen-bonding. Our structural analysis suggests that the barbiturates form a tape-like hydrogen-bonding motif, which is rationalized by considering that the twisted geometries of 2,3-diphenylthiophene cores prevend the competing rosettes from stacking into columnar supramolecular polymers. We also found that a small difference in the molecular polarity originating from the substitutional position of the thiophene core influences interchain association of the supramolecular polymers, affording different luminescent soft materials, gel and nanosheet.

Two barbiturate dyes with regioisomeric thiophene-cored twisted π-systems show strongly enhanced emission through supramolecular polymerization. The supramolecular polymers thus formed exhibit distinct emission colors and degree of agglomeration.     

Inhibition of (dppf)nickel-catalysed Suzuki–Miyaura cross-coupling reactions by α-halo-N-heterocycles

A nickel/dppf catalyst system was found to successfully achieve the Suzuki–Miyaura cross-coupling reactions of 3- and 4-chloropyridine and of 6-chloroquinoline but not of 2-chloropyridine or of other α-halo-N-heterocycles. Further investigations revealed that chloropyridines undergo rapid oxidative addition to [Ni(COD)(dppf)] but that α-halo-N-heterocycles lead to the formation of stable dimeric nickel species that are catalytically inactive in Suzuki–Miyaura cross-coupling reactions. However, the corresponding Kumada–Tamao–Corriu reactions all proceed readily, which is attributed to more rapid transmetalation of Grignard reagents.

Nickel complexes with a dppf ligand can form inactive dinickel(ii) complexes during Suzuki–Miyaura cross-coupling reactions. However, these complexes can react with Grignard reagents in Kumada–Tamao–Corriu cross-coupling reactions.     

Asymmetric β-arylation of cyclopropanols enabled by photoredox and nickel dual catalysis

The enantioselective functionalization and transformation of readily available cyclopropyl compounds are synthetically appealing yet challenging topics in organic synthesis. Here we report an asymmetric β-arylation of cyclopropanols with aryl bromides enabled by photoredox and nickel dual catalysis. This dual catalytic transformation features a broad substrate scope and good functional group tolerance at room temperature, providing facile access to a wide array of enantioenriched β-aryl ketones bearing a primary alcohol moiety in good yields with satisfactory enantioselectivities (39 examples, up to 83% yield and 90% ee). The synthetic value of this protocol was illustrated by the concise asymmetric construction of natural product calyxolane B analogues.

An asymmetric β-arylation of cyclopropanols with aryl bromides was enabled by enantioselective photoredox and nickel dual catalysis.     

Phosphine-catalyzed divergent domino processes between γ-substituted allenoates and carbonyl-activated alkenes

Highly enantioselective and chemodivergent domino reactions between γ-substituted allenoates and activated alkenes have been developed. In the presence of NUSIOC-Phos, triketone enone substrates smoothly reacted with γ-substituted allenoates to form bicyclic furofurans in good yields with high stereoselectivities. Alternatively, the reaction between diester-activated enone substrates and γ-substituted allenoates formed chiral conjugated 1,3-dienes in good yields with excellent enantioselectivities. Notably, by employing substrates with subtle structural difference, under virtually identical reaction conditions, we were able to access two types of chiral products, which are of biological relevance and synthetic importance.

Highly enantioselective and chemodivergent domino reactions between γ-substituted allenoates and activated alkenes have been developed.