具有血液相容性的嵌段聚酯-聚醚接枝共聚物的合成

本文研究了嵌段聚酯-聚醚膜经紫外光活化后,于水溶液中铈盐引发亲水性单体丙烯酰胺在其表面上接枝共聚合反应。同时对接枝物进行了证实和表征。并通过活体动物血液灌流实验表明,此接枝共聚物具有良好的血液相容性。     

Some investigations on the post radiation grafting of acrylamide onto polyethylene films

A study has been made on the post radiation grafting of aqueous acrylamide onto low density polyethylene film. It was found that the addition of 0.05 wt % Mohr's salt reduced effectively the homopolymerization of acrylamide and the grafting process was successfully achieved. The dependence of the grafting rate on the preirradiation dose and monomer concentration was found to be of 1.43 and 1.4 order, respectively. The overall activation energy for the graft polymerization was found to be 13.5 and 1.95 Kcal/mol below and above 45°C, respectively. Some properties of the graft copolymer such as swelling behaviour, electrical conductivity, and reverse osmosis desalination of saline water (water flux and salt rejection), were also investigated and the possibility of its uses in the practical applications was discussed.     

Graft copolymerization ofN‐vinyl‐pyrrolidone and acrylamide on cellulose derivatives: synthesis,characterization and study of their biological effect

Graft copolymers of carboxymethyl cellulose and hydroxyethyl cellulose with N‐vinyl‐2‐pyrrolidone and acrylamide have been synthesized by grafting copolymer of N‐vinyl‐2‐pyrrolidone and acrylamide onto a mixture of carboxymethyl cellulose and hydroxyethyl cellulose by a solution polymerization technique using a redox initiation system. The graft copolymers were characterized by ¹³C‐NMR spectroscopy and scanning electron microscopy. These graft copolymers have been tested for their biodegradability and biological activity. None of the graft copolymer solutions shows any microbial degradation up to 10 days. The reported results are evidence of the possibility of anti‐fungi effect. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and Biomedical Properties of Poly-[(Ethylene-Vinylalcohol)-g-Acrylamide]

This paper deals with the graft copolymerization of acrylamide (AM) onto ethylene-vinyl alcohol copolymer (EVAL) film initiated by cerium(IV) ion. It was found that both the chemical and diffusion factors had influences on the graft reaction. The reaction was initiated on the surface and then penetrated inward as the grafting percentage was increased. The permeability of urea through the grafted EVAL film was improved compared to that of the original film as was the blood compatibility.     

The properties of SBS-g-VP copolymer membrane prepared by UV photografting without degassing

The grafting of 4-vinylpyridine (VP) onto styrene-butadiene-styrene triblock copolymer membrane (SBS) was induced by UV-radiation without degassing to obtain the SBS-g-VP copolymer membrane. The graft copolymer membrane was characterized by electron spectroscopy for chemical analysis (ESCA) and scanning electron microscope (SEM). The tensile strengths and elongations of dry and wet SBS-g-VP copolymer membranes were measured. The contact angle of dry and wet SBS-g-VP graft copolymer membranes with different amount of grafting were determined. By using Kaelble's equation and the contact angle data, the surface energy of dry and wet SBS-g-VP graft copolymer membranes were determined. The protein absorption of fibrinogen and albumin on the SBS-g-VP membranes were evaluated. It was found that the oxygen content in the SBS-g-VP copolymer membrane increased with increasing grafting degree which resulted from the UV photografting without degassing. The tensile strength of dry SBS-g-VP membrane increased with increasing degree of grafting but the elongation decreased. The tensile strengths and elongations of wet SBS-g-VP were significantly lower than those of SBS. The surface energy of dry and wet SBS-g-VP were determined by using Kaelble's equation and the contact angle data. It was found that the surface energy of SBS-g-VP membrane increased. The surface energy of wet SBS-g-VP was higher than that of dry SBS-g-VP. The absorption of albumin and fibrinogen decreased with increasing grafting degree and then levelled off.     

光引发丙烯酰胺在聚醚氨酯膜上的接枝聚合反应

本文研究了以二苯酮为光敏剂,在365nm光照下丙烯酰胺在聚醚氨酯表面的接枝聚合。研究了光照时间、单体浓度、二苯酮浓度对接枝率的影响。对产物作吸水性测定和扫描电镜观察,均证实是接枝共聚物。通过模型化合物的研究,认为激发三线态的二苯酮提取了聚醚氨酯中聚醚软段叔碳原子的氢和氨酯基氮原子上的氢,使这些部位产生自由基,引发单体接枝聚合。     

Polymer–Metal Complexes Obtained by Radiation‐Induced Grafting Process onto Polyester Fabrics

Abstract

This paper reports the preparation of chelating copolymers via grafting of acrylic acid, and/or acrylamide onto polyester microfiber (PETMF) fabrics using a γ‐radiation technique. The effect of monomer concentration on the grafting process at irradiation dose 20?kGy was studied. The prepared graft chains (PETMF‐g‐AA), (PETMF‐g‐AAm), and (PETMF‐g‐PAAc/PAAm) acted as chelating sites for some selected transition metal ions. The effect of grafting on mechanical properties of PETMF and its copolymer–metal complexes was investigated. The prepared chelating copolymers and their metal complexes were characterized using x‐ray (energy dispersive x‐ray, EDX), differential scanning calorimeter (DSC), color parameters, and electrical conductivity measurements. The possibility of practical uses for such prepared graft copolymer–metal complexes was discussed and determined. The observed results showed that the electrical conductivity of the grafted copolymers and their metal complexes are thermally activated. Moreover, the degree of grafting enhanced the conductivity values of the grafted and non‐complexed copolymer up to three orders of magnitude, on the other hand, the conductivity of the copolymer–metal complexes slightly increased.     

STUDIES ON THE OXIDATION AND GRAFT COPOLYMERIZATION OF POLY(ETHER-URETHANE)

A new method of graft copolymerization of acrylamide (AAM) on poly(ether-urethane) (PEU) which was prepared from poly(tetramethylene ether) glycol (PTMG), 4,4'-diphenylmethane diisocyanate (MDI) and ethylene diamine or butanediol extender was investigated. Hydroperoxide group was first introduced onto the surface of PEU through photo-oxidation in the presence of hydrogen peroxide, then it was reacted with ferrous ion or N,N-dimethyl toluidine (DMT) to initiate AAM graft copolymerization on PEU surface. The graft reaction could be carried out effectively at low temperature. The formation of graft copolymer has been verified by its water absorption % and the scanning electron microscopy photographs. Some model compounds of PEU soft segment and hard segment were synthesized in order to clarify the site of graft reaction. The results of oxida-tion and graft copolymerization of model compounds showed that this graft copolymerization possesses higher selectivity, and it takes place predominately at the polyether segments, because the ether linkage in soft segment is very sensitive to oxidation and can form hydroperoxide easily. Thus, the grafting site appears to be at α-carbon of the ether linkage.     

两性淀粉接枝共聚物的就地制备和性质

糊化淀粉经阳离子试剂醚化后再直接与丙烯酸钠(AA-Na)/丙烯酰胺(AM)接枝共聚,制得具有两性的淀粉接枝共聚物。并对淀粉的阳离子试剂醚化、淀粉与AA-Na/AM接枝共聚的接枝率、单体转化率、接枝效率及淀粉的糊化方式对产物性能的影响进行了研究。为工厂就地生产和应用两性淀粉接枝共聚物提供技术依据。     

Water-soluble copolymers. III. Dextran-g-poly(acrylamides) control of grafting sites and molecular weight by Ce(IV)-induced initiation in homogeneous solutions

Model graft copolymers were synthesized by grafting acrylamide onto dextran (M_w = 500,000) utilizing an initiation method in which a Ce(IV)/HNO₃ solution was added to the dextran solution in order to allow coplexation prior to monomer addition. Three synthetic reaction parameters were optimized on the basis of conversion and solution viscosity: monomer concentration, dextran concentration, and nitric acid concentration. Molar ratios of [Ce(IV)]/[dextran] were changed systematically to affect the number and length of the acrylamide grafts. The number of grafting sites and graft chain lengths, determined by selective hydrolysis of the carbohydrate backbone, were in good agreement with those theortically predicted from knowledge of initiation efficiency and monomer conversion. Rheological studies of the model graft copolymers were conducted in aqueous solutions as a function of temperature, added salt, and copolymer concentration.     

Poly(vinylpyrrolidone-b-styrene) block copolymers tethered surfaces for protein adsorption and cell adhesion regulation

Poly(vinylpyrrolidone-b-styrene) (PVP-b-PS) diblock copolymers tethered to glass surfaces were prepared, and the effects on protein adsorption and cellular behavior to the glass and the modified glass surfaces investigated. The PVP-b-PS grafting process was confirmed by water contact angle and XPS measurements. The results obtained for the water contact angles suggest that there are two phases that coexist on the PVP-b-PS block copolymer tethered surface, under aqueous conditions. Although the PVP-b-PS surface possessed, to some extent, a protein resistant property, following introduction of the PS segment to the end of tethered PVP, both fibrinogen and lysozyme adsorption were increased significantly. The PVP-b-PS modified surface, based on Western-blot analysis, appeared to have the greatest amount of surface bound vitronectin, however the conformation of the adsorbed vitronectin may have subsequently been affected by the surface tethered copolymer as was suggested by cell culture results. From these results, we proposed that protein adsorption and cell adhesion can be regulated by tuning the chemical compositions of diblock copolymers tethered to surfaces.     

Preparation of heparin containing SBS-g-VP copolymer membrane for biomaterial usage

Vinyl pyridine (VP) was grafted onto styrene-butadiene-styrene (SBS) triblock copolymer membrane by UV-radiation induced graft copolymerization without degassing to obtain the SBS-g-VP copolymer membrane. The substituted pyridine groups on the SBS-g-VP graft copolymer membrane were quatermized with iodomethane, and then the membrane was treated with heparin to prepare the heparin containing SBS-g-VP copolymer membrane (SBS-g-VP-HEP). The SBS-g-VP and SBS-g-VP-HEP were characterized by electron spectroscopy for chemical analysis (ESCA). The heparin content was determined by toluidine blue heparin assay. The contact angles of dry and wet SBS-g-VP and SBS-g-VP-HEP with different amount of grafting and heparin content were determined. By using Kaelble's equation, the surface energies of SBS-g-VP and SBS-g-VP-HEP were determined. It was found that the surface energy and water content of SBS-g-VP and SBS-g-VP-HEP membrane increased with increasing graft amount and the heparin content, whereas the contact angle decreased. Protein adsorption of fibrinogen and albumin onto the membranes was also performed to evaluate the effect of graft amount and heparin content on the biocompatibility of SBS-g-VP and SBS-g-VP-HEP membranes. The amount of the adsorption of albumin and fibrinogen decreased with increasing grafting amount and heparin content.     

Photoinduced Graft Copolymerization onto Chitosan Under Heterogeneous Conditions

Photoinitiated graft copolymerization of acrylamide onto chitosan under heterogeneous conditions and in the absence of a photo initiator was investigated. The effect of irradiation time, the amount of chitosan and monomer concentration on the extent of grafting was examined. The maximum grafting percentage obtained was 294%. The copolymer was characterized using carbon-13 nuclear magnetic resonance (¹³C-NMR) spectroscopy, X-ray diffraction analysis (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The system designed allows synthesis of grafted chitosan with free amine groups which are otherwise possible only by chemical protection. The swelling properties of copolymer were followed in aqueous solution.     

Scale-up synthesis of vinyl polymer-grafted nano-sized silica by radical polymerization of vinyl monomers initiated by surface initiating groups in the solvent-free dry-system

For the purpose of the prevention of the environmental pollution and the simplification of reaction process, the scale-up radical graft polymerization of vinyl monomers onto nano-sized silica surface initiated by azo groups and peroxycarbonate groups previously introduced onto the surface in the solvent-free dry-system was investigated. The introduction of azo groups onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid chloride). On the other hand, the introduction of peroxycarbonate groups onto the silica surface was achieved by Michael addition of surface amino groups to t-butylperoxy-2-methacryloyloxyethylcarbonate. The graft polymerization of vinyl monomers onto the surface was successfully achieved by splaying monomers to nano-sized silica having azo and peroxycarbonate groups in solvent-free dry-system. It is interesting to note that the formation of ungrafted polymer was depressed in comparison with graft polymerization in solution: the grafting efficiency was 90-95%. In addition, in the solvent-free dry-system, the grafting of copolymer having pendant peroxycarbonate groups onto the nano-sized silica surface and the radical postgraft polymerization of styrene initiated by the pendant initiating groups of the grafted copolymer chain on the silica surface was investigated.     

Graft copolymerisation of acrylamide onto cashew gum

The synthesis of cashew gum-g-polyacrylamide was carried out at 60 °C by a radical polymerisation using potassium persulphate as the redox initiator under N₂ atmosphere. A series of graft copolymers, varying in acrylamide concentration and keeping the concentration of the initiator and polysaccharide constant, was prepared. These graft copolymers were characterised by elemental analysis, infrared and ¹³C NMR spectroscopy, rheological studies, differential scanning calorimetry and thermogravimetric analysis. Comparisons amongst grafting parameters of the reaction of various natural polysaccharides with polyacrylamide (PAM) were carried out. High percentages of acrylamide conversion (%C) and grafting efficiency (%E) were obtained for cashew gum (CG), even with a low acrylamide/gum ratio. All copolymers had intrinsic viscosity and thus the hydrodynamic volume much higher than the CG value and closer to the PAM. The CG-g-PAM solution had an absolute viscosity at 2.5% concentration (wt./vol.) up to 33 and 3.3 times the CG and PAM values, respectively. Grafting of PAM chains onto the polysaccharide enhances its thermal stability.     

聚醚氨酯的氧化及其接枝共聚合的研究

本文研究了在聚醚氨酯表面上进行接枝共聚合的新方法。首先在聚醚氨酯薄膜上通过过氧化氢光氧化引入过氧化氢基,然后在还原剂亚铁盐或N,N-二甲基对甲苯胺的作用下引发丙烯酰胺接枝共聚合,反应具有低温快速的特点。产物经吸水性实验及扫描电子显微镜观察均证实了是一接枝共聚物。通过模型化合物的研究证明,接枝反应具有较高的选择性,接枝共聚占优势地发生在聚醚软段上,接枝地点很可能就在醚键旁的α-碳原子上。     

Surface grafting of polyethylene by mutual irradiation in methyl acrylate vapor. IV. Kinetic analysis by quartz helix microbalances

A detailed kinetic study of the γ-ray-induced surface grafting of methyl acrylate (MA) onto polyethylene (PE) has been investigated by using quartz helix microbalances. Under typical graft conditions, the grafting rate increases, levels off, and then accelerates with irradiation time; i.e., the typical growth process of the surface grafting consists of an initial stage having an increasing rate of grafting, an intermediate stage having a constant rate, and an advanced stage having an accelerated rate. A homopolymer layer (consisting only of an MA component) begins to be formed on the inner graft copolymer layer (consisting both of MA and PE components) at the transition zone in grafting rate after a duration of a constant rate of grafting. Therefore, the increasing rate in increasing rate in the intial stage of grafting reflects the graft copolymerization in the graft copolymer layer (inside the PE sheet), and the increasing rate in the advanced stage reflects the growth of the homopolymer layer. Under grafting reflects the graft tage reflects the growth of the homopolymer layer. Under grafting conditions by which the homolymer layer is not formed throughout the whole grafting process, the surface grafting remains remains in the initial stage. On the order hand, under grafting conditions by which the homopolymer layer begins to be formed from an early stage of grafting, the surface grafting proceeds rapidly from the initial stage to the advanced stage and thus skips the intermediate stage.     

Radiation-induced graft polymerization of acrylamide I. Preparation conditions and gel determination for polyethylene-grafted films

Radiation-induced graft polymerization of acrylamide (AAm) onto low-density polyethylene(LDPE) film has been investigated. The appropriate reaction conditions at which the graft polymerization was carried out successfully were selected. It was observed that the grafting process was enhanced remarkably by using distilled water as diluent. In this grafting system ammonium ferrous sulphate (Mohr's salt) was used as inhibitor to minimize the homopolymerization of AAm and the suitable concentration of such inhibitor was found to be 3 wt %. The dependence of the grafting rate on the monomer concentration was calculated to be 2.9 order, regardless of the irradiation atmosphere (N₂ gas or under vacuum). When the radiation grafting process was carried out under vacuum, higher degrees of grafting were obtained as compared to those in nitrogen gas or in air atmosphere. Network structure was formed in the graft copolymer and the gel formation was determined in the p-xylene-extracted grafted films. Results showed good evidence that the grafting process takes place by the front mechanism.     

Random grafting statistics in graft distribution analysis

Graft distribution functions have been derived from random grafting statistics. Among the functions, the weight fraction of ungrafted backbone chains, the molecular weight distribution of the ungrafted backbone chains and the GPC apparent molecular weight distribution of the graft copolymer have been found to agree with experimental values determined for a graft copolymer system in which grafting was expected to be random. The other functions, which are not directly measurable, are therefore probably also correct. In analytical work the entire set of graft distribution functions may be computed for a graft copolymer system from the following experimental data: (1) molecular weight distribution of the starting backbone chains; (2) the chemical composition of the mixture of the graft copolymer and ungrafted backbone; (3) the graft side-chain molecular weight distribution, which may be assumed to be identical to that of the ungrafted homopolymer separable from the reaction mixture.     

Process parameters and their effect on grafting reactions in core/shell latexes

The grafting of methyl methacrylate (MMA) onto polybutadiene (PB) latexes prepared by seeded emulsion polymerization at 50°C was investigated as a function of: (a) initiator concentration used in the secondary polymerization, (b) monomer-to-polymer ratio, (c) the specific surface area of the seed latex, and (d) the degree of conversion. The thin layer chromatography/flame ionization detection (TLC/FID) technique was used to determine the proportion of graft copolymer in the core/shell latex, It was found that grafting PMMA onto PB depended upon the concentration of initiator, decreasing as the concentration was increased. The amount of grafting increased with increasing specific surface area of the seed latex, while the molecular weight of the acetone-soluble graft copolymer decreased. The amount of graft copolymer was found to decrease concurrently with increasing monomer-to-polymer ratio and degree of conversion. These results suggest a hydrogen abstraction mechanism in the formation of graft PB–PMMA through a chain transfer process.