Compact multiband left-handed metamaterial at terahertz frequencies

We design and analyze a novel multiband left-handed metamaterial based on a fishnet-like structure at terahertz (THz) frequencies.The metamaterial exhibits simultaneous negative refractions around the frequencies of 0.48,1.05,and 1.19 THz for the electromagnetic (EM) wave normal incidence,and around the frequencies of 0.20,0.79,and 1.13 THz for parallel incidence.The simulated results verify the left-handed properties.A particularly important observation is the capability of the proposed metamaterial with a single geometrical structure to display multifrequency operations in a unit cell.The compact metamaterial is a major step toward the miniaturization of THz materials and devices suitable for multifrequencies.     

Three-dimensional surface current loops in broadband responsive negative refractive metamaterial with isotropy

We propose a bulk negative refractive index (NRI) metamaterial composed of periodic array of tightly coupled metallic cross-pairs printed on the six sides of a cube for applications of superlenses. The structural characteristics of the three-dimensional (3D) metamaterial consist in the high symmetry and the superposition of metallic cross-pairs, which can increase the magnetic inductive coupling between adjacent cross-pairs and realize a broadband and isotropic NRI. The proposed 3D structure is simulated using the CST Microwave Studio 2006 to verify the design validity. The simulation results show that the proposed structure can not only realize simultaneously an electric and magnetic response to an incident electromagnetic (EM) wave, but also exhibit a broadband NRI whose relative bandwidth can reach up to 56.7%. In addition, the NRI band is insensitive to the polarization and the incident angle of the incident EM wave. Therefore, the proposed metamaterial is a good candidate material as three-dimensional broadband isotropic NRI metamaterial.     

Wide-Angle Ultra-Broadband Metamaterial Absorber with Polarization-Insensitive Characteristics

An ultra-wideband metamaterial absorber is developed,which is polarized-insensitive and angular-stable.Three layers of square resistive films comprise the proposed metamaterial.The optimal values of geometric parameters are obtained,such that the designed absorber can achieve an ultra-broadband absorption response from 4.73 to 39.04 GHz(relative bandwidth of 156.7%)for both transverse electricity and transverse magnetic waves.Moreover,impedance matching theory and an equivalent circuit model are utilized for the absorption mechanism analysis.The compatibility of equivalent circuit calculation results,together with both full-wave simulation and experimental results,demonstrates the excellent performance and applicability of the proposed metamaterial absorber.     

A metamaterial absorber with direction-selective and polarisation-insensitive properties

This paper reports the design of a metamaterial absorber with direction-selective and polarisation-insensitive property.Both theoretical and simulated results reveal that the absorber has a distinct absorption point with direction selectivity at 7.48 GHz,which is related to the resonance of the metamaterial and is not influenced by the polarisation.The retrieved impedance indicates that the impedance of the absorber can be tuned to approximatively match the impedance of the free space on one side and not to match the impedance of the free space on the other side.This design can result in the minimal reflectance,the minimal transmission and the highest absorbance at the absorption frequency.The distribution of the power loss indicates that the absorber is an excellent electromagnetic wave collector:the wave is first trapped and reinforced in certain specific locations,and then mostly consumed.The distribution of the surface current is consistent with the design,the retrieved impedance and the distribution of the power loss.This absorber may have applications in many scientific and technological areas.     

太赫兹频域的强双带特异材料吸收体

We report the design and simulation of a dual-band perfect terahertz absorber which is composed of an electric Split-Resonance-Ring（eSRR） layer, polyimide spacer and a metal plate layer. The absorber has two near-unity absorptions near 0. 502 THz and 0. 942 THz and both are related to the LC resonance of the eSRR. The results show that the designed terahertz absorber is an excellent electromagnetic wave concentrator. The electromagnetic waves are firstly converged into the spacer and the eSRR layer and are then significantly absorbed.     

Tunable broadband metamaterial absorber consisting of ferrite slabs and a copper wire

A tunable broadband metamaterial absorber is demonstrated at microwave frequencies in this paper.The metamaterial absorber is composed of ferrite slabs with large resonance beamwidths and a copper wire.The theoretical analysis for the effective media parameters is presented to show the mechanism for achieving the perfect absorptivity characteristic.The numerical results of transmission,reflectance,and absorptivity indicate that the metamaterial absorber exhibits a near perfect impedance-match to free space and a high absorptivity of 98.2% for one layer and 99.97% for two layers at 9.9 GHz.The bandwidth with the absorptivity above 90% is about 2.3 GHz.Moreover,the absorption band can be shifted linearly in a wide frequency range by adjusting the magnetic bias.This metamaterial absorber opens a way to prepare perfectly matched layers for engineering applications.     

Equivalent circuit analysis of terahertz metamaterial filters

An equivalent circuit model for the analysis and design of terahertz (THz) metamaterial filters is presented.The proposed model,derived based on LMC equivalent circuits,takes into account the detailed geometrical parameters and the presence of a dielectric substrate with the existing analytic expressions for self-inductance,mutual inductance,and capacitance.The model is in good agreement with the experimental measurements and full-wave simulations.Exploiting the circuit model has made it possible to predict accurately the resonance frequency of the proposed structures and thus,quick and accurate process of designing THz device from artificial metamaterials is offered.     

Planar Metamaterial Microwave Absorber for all Wave Polarizations

We present a design for a polarization insensitive metamaterial absorber at 9.5 GHz by utilizing properly arranged resonant unit cells with orthogonal polarization sensitivity. Full-wave electromagnetic simulation demonstrates nearly perfect microwave absorption, which has been verified by experimental measurement with a maximum absorption of about 92% for incident wave with different polarizations. Furthermore, we find such a metamaterial thin absorber could work for a wide incident angle ranging from 0° to 50°with absorption no less than 80° for both the transverse electric mode and transverse magnetic mode.     

Near field enhancement and absorption properties of the double cylindrical microcavities based on triple-band metamaterial absorber

We numerically study the near field enhancement and absorption properties inside the double cylindrical microcavities based on triple-band metamaterial absorber. The compact single unit cell consists of concentric gold rings each with a gold disk in the center, and a metallic ground plane separated by a dielectric layer. At the normal incidence of electromagnetic radiation, the obtained reflection spectra show that the resonance frequencies of the double microcavities are 16.65 THz,20.65 THz, and 25.65THz, respectively. We also calculate the values of contrast C(C = 1- Rmin), which can reach 95%,97%, and 95% at the corresponding frequencies by optimizing the geometry parameters of structure. Moreover, we demonstrate that the multilayer structure with subwavelength electromagnetic confinement allows 104～105-fold enhancement of the electromagnetic energy density inside the double cavities, which contains the most energy of the incoming electromagnetic radiation. Moreover, the proposed structure will be insensitive to the polarization of the incident wave due to the symmetry of the double cylindrical microcavities. The proposed optical metamaterial is a promising candidate as an absorbing element in scientific and technical applications because of its extreme confinement, multiband absorptions, and polarization insensitivity.     

Electromagnetic field quantization and input–output relation for anisotropic magnetodielectric metamaterial

A phenomenological quantization of electromagnetic field is introduced in the presence of the anisotropic magnetodielectric metamaterial.For a single layer structure with the anisotropic metamaterial,input–output relations of quantized radiation are derived using the Green-function approach.Based on these relations,the reflectance of the linearly polarized wave through this structure is calculated.The results show that different resonant peaks of reflectance appear for different polarized waves and indicate the use of the anisotropic metamaterial as a reflector for a certain polarized wave.Furthermore it is found that such a structure can realize the resonant gap with the increase of the thickness.Finally the effects of the absorption are considered and we find that the above properties do not change with the introduction of the absorption.     

特异材料吸收体的透射线模型与场分析:理想的电磁波浓缩器(英文)

Arising from the proposed Transmission Line(TL) model for ERR and wire structure, a TL model for a metamaterial absorber is proposed. The S-parameters obtained by this TL model demonstrate the same shapes as the simulation. An investigation of the TL model and average absorption power densities shows that the metamaterial absorber does not simply convert the electromagnetic wave into thermal energy, but concentrate the electromagnetic wave into a small space where it is finally absorbed. This suggests that ...     

基于宽边耦合螺旋结构的低频小型化极化不敏感超材料吸波体

设计、仿真并实验验证了基于宽边耦合螺旋结构的低频小型化超材料吸波体. 实验测试结果表明, 该超材料吸波体在1.39 GHz吸收率达到最大为98%, 其单元尺寸和总厚度均为6.8 mm, 约为1/32工作波长, 实现小型化窄带吸波. 由于吸波体中螺旋结构是旋转对称排列的, 因而其对垂直入射电磁波的极化方向是不敏感的. 此外, 该超材料吸波体对斜入射横电和横磁极化电磁波在60°时, 仍具有强吸收. 关键词： 超材料 吸波体 小型化     

基于电磁谐振的极化无关透射吸收超材料吸波体

仿真并实验验证了基于电磁谐振的极化无关透射吸收超材料吸波体, 该吸波体可以实现低频透射和高频吸收.实验测试结果表明, 该吸波体在6.77 GHz 吸收率峰值为83.6%, 半功率带宽为4.3%, 实现窄带强吸收.为进一步拓展该谐振型超材料吸波体的吸收带宽, 利用其低频透射特性, 将两个工作于不同频段的吸波体叠加在一起, 测试结果表明, 复合后超材料吸波体的半功率带宽可以增大到10.9%, 吸收率也略有增强. 该超材料吸波体设计简单, 具有较强的实用性和应用前景. 关键词： 极化无关 透射吸收 超材料吸波体     

Broadband visible metamaterial absorber based on a three-dimensional structure

In this paper, a broadband metamaterial absorber is successfully designed by a three-dimensional structure. And the three-dimensional absorber is just obtained by a two-dimensional structure which rotates 90°along x-axis. The simulated results show that the absorption of the three-dimensional metamaterial absorber is much better than the two-dimensional absorber. Moreover, the absorber is polarization-sensitive for the incident electromagnetic waves due to the asymmetry of the structure. Compared with the Y-polarization wave, the proposed absorber can realize broadband absorption with greater than 90% from 355.6 to 737.7 THz for X-polarized wave. Finally, based on the analysis of the electric field and surface current distributions, it can demonstrate that the localized surface plasmons and dipoles resonances will play an important role in the broadband absorption. And we believe that the metamaterial absorber will have many potential applications in emitter and energy harvesting.     

基于二氧化钒宽、窄带可切换的双功能超材料吸收器研究

本文提出了一种宽、窄带可切换的双功能超材料吸收器.在超材料吸收器的结构中,引入了相变材料二氧化钒(VO2),仅利用单个可切换超表面就能实现不同的功能,其不同功能之间的相互转换通过VO2绝缘态和金属态之间的可逆相变特性实现.当VO2处于金属态时,设计的结构可以看作一个超材料宽带吸收器.仿真结果表明,在1.55THz至2....     

基于等效介质原理的宽角超材料吸波体的理论分析

目前,很少有文章就如何实现宽角度吸波材料进行详细的理论分析和设计指导,设计宽角度吸波材料仍然是一件很困难的事情.本文基于等效介质理论对带有反射地板的单层介质超材料吸波体进行较为详细的理论分析.从基础电磁理论出发,推导TE波(横电波,电场方向与入射面垂直的平面电磁波)和TM波(横磁波,磁场方向与入射面垂直的平面电磁波)照射下吸波体的反射系数,分析实现宽角度吸波效果所需的等效电磁参数,为宽角度超材料吸波体的设计提供了理论基础.此外,论文还理论分析了实现宽带宽角吸波等效电磁参数所要满足的条件,并做了计算检验.结果表明,当介质等效电磁参数按照特殊曲线随频率发生变化时,理论上能实现宽带宽角的吸波效果.     

极薄宽角度平面超材料吸波体仿真与实验验证

仿真和实验验证了厚度极薄的平面结构超材料吸波体, 该吸波体采用加载交指电容的耶路撒冷十字结构, 通过增加单元间的耦合电容显著降低了其工作频率. 测试结果表明, 该超材料吸波体在1.58 GHz, 吸收率峰值为88.48%, 其厚度为2 mm, 约为1/95工作波长, 吸波体的单元尺寸为11 mm, 约为1/17工作波长. 此外, 通过金属通孔将耶路撒冷十字结构与金属底板相连接, 使其对斜入射横电和横磁极化电磁波具有宽角度吸收特性, 在60°时依然具有较高的吸收率, 且吸收峰频率几乎不发生偏移, 从而使其更具实用价值. 关键词： 极薄 宽角度 超材料吸波体     

基于石墨烯和二氧化钒的太赫兹宽带可调谐超材料吸收器

太赫兹超材料吸收器作为一种重要的太赫兹功能器件,被广泛应用于生物医学传感、电磁隐身、军用雷达等多个领域.但这种传统的超材料吸收器结构具有可调谐性差、功能单一、性能指标不足等缺点,已经无法满足复杂多变的电磁环境的要求,因此可调谐超材料吸收器逐渐成为了太赫兹功能器件领域的研究热点.为实现超材料吸收器吸收特性的调谐,通常从调...     

超薄柔性透射型超构材料吸收器

设计并加工了一种超薄柔性透射型吸收器,总体厚度为0.288 mm,可实现柔性弯曲,容易做到与曲面目标共形.该吸收器由三层结构组成,底层是金属光栅,中间为介质层,表面单元由两条平行放置的尺寸不同的金属线组成.仿真和实验结果表明,对横电波在5和7 GHz的吸收分别达到97.5%和96.0%,对横磁波在3.0—6.5 GHz都能保持90%以上的透射率.两个吸收频点可分别独立调节,增加了设计的灵活性.另外,当入射角增大到60°时,该吸收器的性能基本不受影响,表现出良好的广角特性.