Expression and Characterization of Recombinant GH11 Xylanase from Thermotolerant Streptomyces sp. SWU10

Xylans are major hemicellulose components of plant cell wall which can be hydrolyzed by xylanolytic enzymes. Three forms of endo-β-1,4-xylanases (XynSW1, XynSW2A, and XynSW2B) produced by thermotolerant Streptomyces sp. SWU10 have been reported. In the present study, we described the expression and characterization of the fourth xylanase enzyme from this bacteria, termed XynSW3. The gene containing 726 bp was cloned and expressed in Escherichia coli. The recombinant enzyme (rXynSW3) was purified from cell-free extract to homogeneity using Ni-affinity column chromatography. The apparent molecular mass of rXynSW3 was 48 kDa. Amino acid sequence analysis revealed that it belonged to a xylanase of glycoside hydrolase family 11. The optimum pH and temperature for enzyme activity were 5.5–6.5 and 50 °C, respectively. The enzyme was stable up to 40 °C and in wide pH ranges (pH 0.6–10.3). Xylan without arabinosyl side chain is the most preferable substrate for the enzyme. By using birch wood xylan as substrate, rXynSW3 produced several oligosaccharides in the initial stage of hydrolysis, and their levels increased with time, demonstrating that the enzyme is an endo-acting enzyme. The major products were xylobiose, triose, and tetraose. The rXynSW3 can be applied in several industries such as food, textile, and biofuel industries, and waste treatment.     

Purification and Characterization of Novel Halo-Acid-Alkali-Thermo-stable Xylanase from Gracilibacillus sp. TSCPVG

An aerobic xylanolytic moderately halophilic and alkali-tolerant bacterium, Gracilibacillus sp. TSCPVG, produces multiple xylanases of unusual halo-acid-alkali-thermo-stable nature. The purification of a major xylanase from TSCPVG culture supernatant was achieved by hydrophobic and gel permeation chromatographic methods followed by electroelution from preparatory PAGE. The molecular mass of the purified xylanase was 42 kDa, as analyzed by SDS-PAGE, with a pI value of 6.1. It exhibited maximal activity in 3.5 % NaCl and retained over 75 % of its activity across the broad salinity range of 0–30 % NaCl, indicating a high halo-tolerance. It showed maximal activity at pH 7.5 and had retained 63 % of its activity at pH 5.0 and 73 % at pH 10.5, signifying the tolerance to broad acid to alkaline conditions. With birchwood xylan as a substrate, K _m and specific activity values were 21 mg/ml and 1,667 U/mg, respectively. It is an endoxylanase that degrades xylan to xylose and xylobiose and had no activity on p-nitrophenyl-β-d-xylopyranoside, p-nitrophenyl-β-d-glucopyranoside, p-nitrophenyl acetate, carboxymethylcellulose, and filter paper. Since it showed remarkable stability over different salinities, broad pH, and temperature ranges, it is promising for application in many industries.     

Characterization of a kerationlytic metalloprotease from Bacillus sp. SCB-3

A keratinolytic protease-producing microorganism was isolated from soybean paste waste and was identified as a strain of Bacillus sp. The keratinase was purified by polyethylene glycol precipitation and two successive column chromatographies with DEAE-Toyopearl 650C and Sephacryl S-200 HR. The purified enzyme had overall 11 purification folds with an 18% yield. The results of sodium dodecyl sulfate polyacrylamide gel electrophoresis and gel filtration on Sephacryl G-200 indicated that the purified enzyme was monomeric and had a molecular weight of 134 kDa. The optimum temperature and pH were 40°C and 7.0, respectively. This enzyme was completely inhibited by EDTA and EGTA, and it was restored by the addition of Ca⁺² and Mg⁺². These results suggested that it is a metalloprotease. The stimulated enzyme activity by reducing agents indicated that the reducing condition was important in the expression of the activity.     

A Novel Alkaliphilic Xylanase from the Newly Isolated Mesophilic Bacillus sp. MX47: Production, Purification, and Characterization

A newly isolated bacterial strain, Bacillus sp. MX47, was actively producing extracellular xylanase only in xylan-containing medium. The xylanase was purified from the culture broth by two chromatographic steps. The xylanase had an apparent molecular weight of 26.4?kDa with an NH₂-terminal sequence (Gln-Gly-Gly-Asn-Phe) distinct from that of reported proteins, implying it is a novel enzyme. The optimum pH and temperature for xylanase activity were 8.0 and 40?°C, respectively. The enzyme activity was severely inhibited by many divalent metal ions and EDTA at 5?mM. The xylanase was highly specific to beechwood and oat spelt xylan, however, not active on carboxymethyl cellulose (CMC), avicel, pectin, and starch. Analysis of the xylan hydrolysis products by Bacillus sp. MX47 xylanase indicated that it is an endo-??-1,4-xylanase. It hydrolyzed xylan to xylobiose as the end product. The K _m and V _max values toward beechwood xylan were 3.24?mg?ml^?1 and 58.21???mol?min^?1?mg^?1 protein, respectively.     

Xylanase Isozymes from the Newly Isolated Bacillus sp. CKBx1D and Optimization of Its Deinking Potentiality

Recycling of civic paper waste by enzyme-based technology is nowadays a point of much concern for pollution-less green environment. In this study, the deinking effectiveness of purified xylanase from a newly isolated bacterium was evaluated for recycling of laser jet paper waste. A potent xylanases-producing bacterium from the microbial consortia of termite gut was isolated, which was further identified on the basis of 16S rRNA sequence as Bacillus sp. CKBx1D. In submerged fermentation condition, the isolate produced the highest level of xylanase (480?U/ml) at 36?h of growth. The extracellular xylanase system comprises of three distinct isozymes (est. Mw 35.28, 28.63, 18.94?kDa). The deinking of laser printed paper waste was performed using the purified enzyme mixture. Whole operational parameters were optimized using the Response Surface Methodology; it was found that at pH 6.8 with 47.2?h of continuous shaking at constant temperature of 35?°C, enzymes showed best deinking activity. After enzyme treatment, the physical properties of the pulp like brightness and ERIC (effective residual ink content) values were enhanced, whereas the pulp opacity was more reduced than the control treatment. Hence, the bacterial isolate and its xylanolytic enzyme system could efficiently be used in recycling paper waste as deinking agent.     

Recombinant Expression and Characterization of l-Asparaginase II from a Moderately Thermotolerant Bacterial Isolate

A moderately thermotolerant bacterium belonging to Enterobacteriaceae, which can grow at 44.5?°C, was isolated from cow dung; l-asparaginase II gene was isolated by PCR, cloned, and expressed in pET 20b with pelB leader sequence and 6× Histidine tag at the C-terminal end. The active protein from the soluble sonicated fraction was purified through nickel affinity chromatography. After characterization, the purified protein showed optimum activities at a temperature of 37?°C and in a buffer system of pH?6 to 7. The enzyme exhibited thermostability at 50?°C with a 33% and 28% of activity retention after 45 and 60?min. The kinetic parameters for the enzyme were calculated from Lineweaver?CBurk plot, and K _m and V _max were 0.89?mM and 0.18?U/mg, respectively.     

Structure and Function of a Multidomain Alkaline Xylanase from Alkaliphilic Bacillus Sp. Strain 41M-1

Xylanase is an enzyme that catalyzes the hydrolysis of xylan, a -1,4-linked xylose polymer. Alkaliphilic Bacillus sp. strain 41M-1 secretes a xylanase (xylanase J) that has an alkaline pH optimum. Xylanase J is a multidomain enzyme and consists of two functional domains: a family 11/G catalytic domain and a non-catalytic xylan-binding domain. The xylan-binding domain bound to xylan and enhanced catalytic activity of the adjacent catalytic domain. Mutational analyses revealed some amino acid residues that contribute to catalytic activity, alkaliphily and xylan-binding activity of xylanase J.     

Production,Partial Purification,and Biochemical Characterization of a Thermotolerant Alkaline Metallo-protease from Staphylococcus sciuri

Applied Biochemistry and Biotechnology - (R)-[3,5-bis(trifluoromethyl) phenyl] ethanol [(R)-3,5-BTPE] is a crucial chiral intermediate for the synthesis of the NK-1 receptor antagonists aprepitant,...     

Urethanase of Bacillus licheniformis sp. isolated from mouse gastrointestine.

Trace levels of urethane, a cancer causing chemical, were detected in many kinds of wine, sherry, whisky, brandy and sake. Urethane formation from urea and ethanol in sake can be prevented by the treatment of acid urease, which is produced by Lactobacillus fermentum, but urethane, once formed, is very difficult to decompose. In order to keep the safety of alcoholic beverages, enzymatic removal of urethane has become an urgent problem. We found that Bacillus licheniformis sp., isolated from mouse gastrointestine, decomposed urethane to ethanol and ammonia. The enzyme showed higher urethanase activity at an acidic condition than at a neutral condition, and was resistant against ethyl alcohol of high concentrations. However, the enzyme had a low affinity to urethane for the industrial removal of the compound from alcoholic beverages.     

Characteriztion of a novel feather-degrading Bacillus sp. strain

Feather waste is generated in large amounts as a byproduct of commercial poultry processing. This residue is almost pure keratin, which is not easily degradable by common proteolytic enzymes. A feather-degrading bacterium was isolated from poultry feathers in decomposition. The strain identified as kr16 showed important feather-degrading activity when grown on basal medium containing 10 g/L of native feather as the source of energy, carbon, and nitrogen. The isolate was characterized according to the phenotypical characteristics and biochemical profiling that belong to the Bacillus genus. Keratinolytic activity of this isolate was monitored during cultivation of the bacterium on raw feathers at different temperatures. Maximum growth and feather-degrading activity were observed at 30–37°C. The keratinolytic enzyme had a pH optimum ranging from 8.0 to 11.0 and a temperature optimum of 45–65°C. The keratinase was strongly inhibited by EDTA and the metal ions Hg²⁺ and Sn²⁺.     

Characterization of a New Cold-adapted Lipase from Pseudomonas sp. TK-3

A psychrotrophic Pseudomonas sp. TK-3 was isolated from dirty and cool stream water in Toyama, Japan from which we cloned and characterized the bacterial lipase LipTK-3. The sequenced DNA fragment contains an open reading frame of 1,428?bp that encoded a protein of 476 amino acids with an estimated molecular mass of 50,132?Da. The lipase showed high sequence similarity to those of subfamily ??.3 lipase and had a conserved GXSXG motif around the catalytic Ser residue. Its optimal temperature was 20?C25?°C, lower than in most other subfamily ??.3 lipases. The lipase exhibited about 30?% of maximal activity at 5?°C. The optimal pH value was 8.0. The activity was strongly inhibited by EDTA and was highly dependent on Ca²⁺. Tricaprylin and p-nitrophenyl caprylate were the most favorable substrates among the triglycerides and p-nitrophenyl esters, respectively. LipTK-3 also showed high activity towards natural substrates including edible vegetable oils and animal fats. Furthermore, LipTK-3 was very active and stable in the presence of several detergents, metal ions, and organic solvents. This cold-adapted lipase may prove useful for future applications.     

Gene Cloning,Overexpression, and Characterization of a Xylanase from <Emphasis Type="Italic">Penicillium</Emphasis> sp. CGMCC 1669

A xylanase-encoding gene, xyn11F63, was isolated from Penicillium sp. F63 CGMCC1669 using degenerated polymerase chain reaction (PCR) and thermal asymmetric interlaced (TAIL)-PCR techniques. The full-length chromosomal gene consists of 724 bp, including a 73-bp intron, and encodes a 217 amino acid polypeptide. The deduced amino acid sequence of xyn11F63 shows the highest identity of 70% to the xylanase from Penicillium sp. strain 40, which belongs to glycosyl hydrolases family 11. The gene was overexpressed in Pichia pastoris, and its activity in the culture medium reached 516 U ml⁻¹. After purification to electrophoretic homogeneity, the enzyme showed maximal activity at pH 4.5 and 40°C, was stable at acidic buffers of pH 4.5–9.0, and was resistant to proteases (proteinase K, trypsin, subtilisin A, and α-chymotrypsin). The specific activity, K _m, and V _max for oat spelt xylan substrate was 7,988 U mg⁻¹, 22.2 mg ml⁻¹, and 15,105.7 μmol min⁻¹ mg⁻¹, respectively. These properties make XYN11F63 a potential economical candidate for use in feed and food industrial applications.     

Isolation of Cyclodextrin Producing Thermotolerant Paenibacillus sp. from Waste of Starch Factory and Some Properties of the Cyclodextrin Glycosyltransferase

A Cyclodextrin (CDs) producing bacteria was isolated from waste of starch factory in Thailand and identified as Bacillus circulans by biochemical characterization and Paenibacillus sp. by 16S rRNA. The Paenibacillus grew and produced cyclodextrin glycosyltransferase (CGTase) at temperature range 37–45 °C. The optimum culturing conditions for highest CD-forming activity were pH 10.0 and 40 °C for 72 h in Horikoshi broth containing 0.5% soluble starch. The CGTase was partially purified by starch absorption, with 64% recovery and purification fold of 27. The optimum temperatures for dextrinizing and CD-forming activity were 70 and 50–55 °C. At the optimum temperature, the optimum pH for dextrinizing activity was 6.0, while CD-forming activity was 7.0. When the enzyme was incubated for 1 h at different temperatures, CD-forming activity retained its full activity up to 70 °C while dextrinizing activity dropped to 60%. Cyclodextrin products analyzed by HPLC was α:β=1:1, temperature of reaction mixture can affect the yield of CDs.     

Screening and Xylanase Production by Streptomyces sp. Grown on Lignocellulosic Wastes

Xylanases have raised interest because of their potential applications in various industrial fields, including the pulp and paper industries, bioethanol production, and the feed industry. In bioethanol production from lignocellulosic compounds, xylanase can improve the hydrolysis of cellulose into fermentable sugars, since the xylan restricts the cellulases from acting efficiently. In this work, a new thermophilic Streptomyces sp. was selected for its ability to produce xylanase. Carbon source selection is an important factor in the production of hemicellulases. The highest activity was obtained when Streptomyces sp. I3 was grown in the presence of wheat bran. Xylanase activity was partially characterized concerning the effect of pH and temperature on activity and thermostability, and the effects of different metal ions were also tested. The pH and temperature profile showed optimal activity at pH 6.0/70 °C. Zymogram analysis showed multiple xylanases (39, 21, 18, and 17 kDa). Xylanases studied in this work are thermophilic, thermostable, and active in a wide pH range; they have potential to be used in the development of new processes of biotechnological interest.     

Purification and Biochemical Characterization of a Highly Thermostable Xylanase from <Emphasis Type="Italic">Actinomadura</Emphasis> sp. Strain Cpt20 Isolated from Poultry Compost

An extracellular thermostable xylanase from a newly isolated thermophilic Actinomadura sp. strain Cpt20 was purified and characterized. Based on matrix-assisted laser desorption–ionization time-of-flight mass spectrometry analysis, the purified enzyme is a monomer with a molecular mass of 20,110.13 Da. The 19 residue N-terminal sequence of the enzyme showed 84% homology with those of actinomycete endoxylanases. The optimum pH and temperature values for xylanase activity were pH 10 and 80 °C, respectively. This xylanase was stable within a pH range of 5–10 and up to a temperature of 90 °C. It showed high thermostability at 60 °C for 5 days and half-life times at 90 °C and 100 °C were 2 and 1 h, respectively. The xylanase was specific for xylans, showing higher specific activity on soluble oat-spelt xylan followed by beechwood xylan. This enzyme obeyed the Michaelis–Menten kinetics, with the K _m and k _cat values being 1.55 mg soluble oat-spelt xylan/ml and 388 min⁻¹, respectively. While the xylanase from Actinomadura sp. Cpt20 was activated by Mn²⁺, Ca²⁺, and Cu²⁺, it was, strongly inhibited by Hg²⁺, Zn²⁺, and Ba²⁺. These properties make this enzyme a potential candidate for future use in biotechnological applications particularly in the pulp and paper industry.