Alkalimetall-Cluster im Zeolith Y Darstellung,Eigenschaften, Reaktionen

Alkali Metal Clusters in Zeolite Y. Preparation, Properties, Reactions Alkali metal clusters (Type AB₃³⁺) were synthesized by reaction of alkali metal A (Li, Na, K, Rb, Cs) with the cations B (alkali, alkaline earth, and rare earth metals) of zeolite Y. The compounds were characterized by UV/VIS spectroscopy, oxidation by carbon oxides and organic halides, and adsorption of gases and polar molecules. The clusters are less reactive than the free alkali metals, the redox potential depends on the alkali metal as well as the cation of zeolite. Chemical interactions with typical ligands and with N₂, Ar, Kr, CO, CO₂, Benzene, and n-Hexane were observed. Reaction with ammonia leads to solvated electrons in zeolite's super-cage, stable up to 240 K.     

Alkali metal salts of acrylamide C3H4NOM (M = Li,Na, and K): Synthesis and vibrational spectra

Alkali metal salts of acrylamide C₃H₄NOM (M = Li, Na, and K) were synthesized for the first time by metallation of acrylamide with alkali metals, their alkyl derivatives, or hydrides. The structures of the compounds synthesized were studied by Raman and IR spectroscopy. Based on the results obtained, an ionic structure was proposed for the salts. The salts were tested as initiators of the anionic polymerization of acrylamide. The catalytic activity of C₃H₄NOM in the polymerization of acrylamide is not lower than that of the well known catalyst, KOBu¹.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2316–2319, September, 1996.     

Facile synthesis and characterization of monocrystalline cubic ZrO2 nanoparticles

Crystalline ZrO₂ nanoparticles were prepared from zirconium isopropoxide by slow hydrolysis and subsequent hydrothermal treatment of solutions containing various amounts of sodium hydroxide at 180 °C. Whereas moderately basic solutions lead to the formation of nanoparticles of monoclinic ZrO₂ with plate-like morphology, and nanoparticles of the cubic ZrO₂ high-temperature polymorph with diameters of approx. 5 nm were obtained from strongly basic solutions. The morphology, structure and properties of as-synthesized nanoparticles were characterized using HRTEM, XRD, Raman spectroscopy, UV–vis, PL spectroscopy and BET measurements. The formation of both, the monoclinic and the cubic polymorph, was confirmed by electron microscopy and Raman spectroscopy. The crystallinity and morphology of the resulting ZrO₂ nanoparticles can be adjusted by the choice of the reaction conditions. The cubic ZrO₂ nanoparticles have a high surface area (300 m²/g) and exhibit a strong photoluminescence in the UV region.     

Local Structure of Amorphous and Highly Dispersed Zirconium Hydroxides and Oxides

The local structure of amorphous and highly dispersed hydroxide and oxide zirconium compounds prepared from zirconyl nitrate solutions by precipitation was studied by an X-ray diffraction technique of radial electron distribution. It was found that X-ray amorphous precipitates were formed at 383 K. These precipitates were polynuclear hydroxo complexes, whose short-range ordering was similar to the structure of a cubic ZrO₂ phase. A special feature of these formations, compared with the cubic oxide phase, is that the closest Zr–Zr distance in them is shortened by 0.2 Å, NO₃ and OH groups are the constituents of an anionic sublattice, and the coordination number of Zr–anion distances is increased. Calcination at 653 K followed by cooling to room temperature resulted in the appearance of a monoclinic ZrO₂ phase with a crystallite size of 60 Å along with the cubic phase. The amount of the former phase depended on the pH of precipitation and on the presence of residual NO₃ and OH groups in precipitates.     

Inter-Alkali-Metal Dative Bond in the MMN3− (M=Alkali Metal) Cluster

Alkali metals are generally Lewis acids. On the contrary, Lewis basic character of alkali metals forming donor – acceptor complexes is a very rare phenomenon. In this contribution, I have theoretically designed an anionic cluster MMN₃⁻ (M=alkali metals) on the basis of experimentally known reagent, alkali salt of azide ion MN₃, which shows unprecedented M:⁻→M donor-acceptor interaction. To the best of author's knowledge, the characterization of such donor-acceptor interaction among alkali metals is unprecedented. Formation of the 2c–2e donor-acceptor bonds have been confirmed by quantum theory of atoms in molecules and electron localization function analyses. The calculated bond dissociation energies are significant suggesting their possible spectroscopic identification.     

Reactions of Metal Salts and Alkali Metal Nitrates. Role of the Metal Precursors and Alkali Metal Ions in the Resulting Phase of Zirconia

Zirconia powders are prepared by reaction of a zirconium precursor with an alkali metal nitrate. The major part of the reactions takes place before the melting points and then the reactions go slowly to completion at 450°C in the molten salts. The roles of the precursor and the alkali metal ion are discussed considering the reaction between two precursors, octahydrated zirconium oxychloride and zirconium tetrachloride, and two nitrates, LiNO₃ and NaNO₃, and some resulting physico-chemical differences. The obtained zirconia powders contain very small amounts of alkali metal ions which act as stabilizing agent. Their effect on the balance tetragonal-monoclinic ZrO₂ depends upon the homogeneity of their distribution which is related to their ability to diffuse inside the bulk of particles and their polarizing power when located mainly on the surface.     

The salting out action of alkali metal nitrates on the water-diethylamine binary system

The results of a polythermal study of the salting out action of alkali metal (Na, K, and Cs) nitrates on the water-diethylamine binary system characterized by stratification with a lower critical solution point (LCSP) were comparatively analyzed. Alkali metal nitrates experiencing homoselective solvation in aqueousorganic solvents were found to decrease the LCSP of this binary system, that is, have a salting out action. A decrease in the radius of the cation in the series CsNO₃-KNO₃-NaNO₃ decreased the temperature of critical tie line formation in the monotectic state of salt-water-diethylamine ternary systems (69.3, 48.1, and 22.9°C, respectively). In all ternary systems, first and foremost in the system with potassium nitrate, the effect of diethylamine salting out from aqueous solutions grew stronger as the temperature increased. The conclusion was drawn that, among the salts studied, sodium nitrate had the strongest salting out effect at 22.9–88.4°C, and potassium nitrate, at 88.4–150.0°C.     

Effect of metals on the catalytic activity of sulfated zirconia for light naphtha isomerization

We studied on the function of the metal in the sulfated zirconia(SO₄^2–/ZrO₂) catalyst for the isomerization reaction of light paraffins. The addition of Pt to the SO₄^2–/ZrO₂ carrier could keep the high catalytic activity. The improvement in this isomerization activity is because Pt promotes removal of the coke precursor deposited on the catalyst surface. Though this catalytic function was observed in other transition metals, such as Pd, Ru, Ni, Rh and W, Pt exhibited the highest effect among them. It was further found that the Pd/SO₄^2–/ZrO₂–Al₂O₃ catalyst possessed a catalytic function for desulfurization of sulfur-containing light naphtha in addition to the skeletal isomerization. The sulfur tolerance of catalyst depended on the method of adding Pd, and the catalyst prepared by impregnation of the SO₄^2–/ZrO₂–Al₂O₃ with an aqueous solution of Pd exhibited the highest sulfur tolerance.Further, we investigated the improvement in sulfur tolerance of the Pt/SO₄^2–/ZrO₂–Al₂O₃ catalyst by impregnation of Pd. The results of EPMA analysis indicated that this catalyst was a hybrid-type one (Pt/SO₄^2–/ZrO₂–Pd/Al₂O₃) in which Pt/SO₄^2–/ZrO₂ particles and Pd/Al₂O₃ particles adjoined closely. This hybrid catalyst possessed a very high sulfur tolerance to the raw light naphtha that was obtained from the atmospheric distillation apparatus, although this light naphtha contained much sulfur. We assume that such a high sulfur tolerance in the hybrid catalyst is brought about by the isomerization function of Pt/SO₄^2–/ZrO₂ particles and the hydrodesulfurization function of Pd/Al₂O₃ particles. Besides, since the hybrid catalyst also provides high catalytic activity in the isomerization of HDS light naphtha, we suggest that the Pd/Al₂O₃ particles supply atomic hydrogen to the Pt/SO₄^2–/ZrO₂ particles by homolytic dissociation of gaseous hydrogen and also enhance the sulfur tolerance of Pt/SO₄^2–/ZrO₂ particles. Finally, we also propose the most suitable location of Pd and Pt in the metal-supported SO₄^2–/ZrO₂–Al₂O₃ catalyst.     

Reaction of secondary phosphine selenides with the system Se/MOH (M = Li, Na, K, Rb, Cs): A novel three-component synthesis of diorganodiselenophosphinates

Secondary phosphine selenides, R₂P(Se)H (R = PhCH₂CH₂, PhCH(Me)CH₂, 4-t-BuC₆H₄CH₂CH₂, NaphthylCH₂CH₂, Ph), react with the system Se/MOH (M = Li, Na, K, Rb, Cs) in the system THF/EtOH at ambient temperature unusually fast (20–30 s) to give cleanly and almost quantitatively (in 94–100% yield) earlier unknown diorganodiselenophosphinates of alkali metals.     

Soluble,crystalline, and thermally stable alkali CO2− and carbonite (CO22−) clusters supported by cyclic(alkyl)(amino) carbenes

The mono- and dianions of CO₂ (i.e., CO₂⁻ and CO₂²⁻) have been studied for decades as both fundamentally important oxycarbanions (anions containing only C and O atoms) and as critical species in CO₂ reduction and fixation chemistry. However, CO₂ anions are highly unstable and difficult to study. As such, examples of stable compounds containing these ions are extremely limited; the unadulterated alkali salts of CO₂ (i.e., MCO₂, M₂CO₂, M = alkali metal) decompose rapidly above 15 K, for example. Herein we report the chemical reduction of a cyclic (alkyl)(amino) carbene (CAAC) adduct of CO₂ at room temperature by alkali metals, which results in the formation of CAAC-stabilized alkali CO₂⁻ and CO₂²⁻ clusters. One-electron reduction of CAAC–CO₂ adduct (1) with lithium, sodium or potassium metal yields stable monoanionic radicals [M(CAAC–CO₂)]_n (M = Li, Na, K, 2–4) analogous to the alkali CO₂⁻ radical, and two-electron alkali metal reduction affords dianionic clusters of the general formula [M₂(CAAC–CO₂)]_n (5–8) with reduced CO₂ units which are structurally analogous to the carbonite anion CO₂²⁻. It is notable that crystalline clusters of these alkali–CO₂ salts may also be isolated via the “one-pot” reaction of free CO₂ with free CAAC followed by the addition of alkali metals – a process which does not occur in the absence of carbene. Each of the products 2–8 was investigated using a combination of experimental and theoretical methods.

The direct chemical reduction of CAACCO2 adducts by alkali metals to yield multinuclear clusters is reported. The mono- and dianions of CO₂ have been studied for decades and are fundamentally important oxycarbanions and critical species in CO₂ fixation chemistry.     

Phase transformation and crystalline growth of 4 mol% yttria partially stabilized zirconia

The phase transformation and crystalline growth of 4 mol% yttria partially stabilized zirconia (4Y-PSZ) precursor powders have been investigated using the coprecipitation route, using zirconium oxide chloride octahydrate (ZrOCl₂·8H₂O) and yttrium nitrate (Y(NO₃)₃·6H₂O) as the initial materials. Differential thermal analysis (DTA), X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), nano beam electron diffraction (NBED), and high resolution TEM (HRTEM) were utilized to characterize the behavior of phase transformation and crystalline growth of the 4Y-PSZ precursor powders after calcined. Tetragonal ZrO₂ crystallization occurred at about 718.2 K. The activation energy of tetragonal ZrO₂ crystallization was 227.0 ± 17.4 kJ/mol, obtained by a non-isothermal method. The growth morphology parameter (n) and growth mechanism index were close to 2.0, showing that tetragonal ZrO₂ had a plate-like morphology. The crystalline size of tetragonal ZrO₂ increased from 7.9 to 27.6 nm when the calcination temperature was increased from 973 to 1,273 K. The activation energies of tetragonal ZrO₂ growth were 14.97 ± 0.33 and 84.46 ± 6.65 kJ/mol when precursor powders after calcined from 723–973 and 973–1,273 K, respectively.     

Formation of ZrO2 Nanocrystals in Hydrothermal Media of Various Chemical Compositions

Formation of ZrO₂ nanocrystals of various modifications was studied in relation to the chemical composition of the hydrothermal solution and in connection with the kinetic features of the process. The strongest effect on the structure of ZrO₂ is exerted by addition to the hydrothermal solution of alkali metal fluorides or potassium iodide, which induce predominant formation of monoclinic ZrO₂ nanocrystals. The mechanism by which additions of alkali metal hydroxides and halides affect the phase state of ZrO₂ nanocrystals was revealed.     

Adsorption of Ions on Zirconium Oxide Surfaces from Aqueous Solutions at High Temperatures

Surface titrations were carried out on suspensions of monoclinic ZrO₂ from 25 to 290 °C slightly above saturation vapor pressure at ionic strengths of 0.03, 0.1 and 1.0 mol⋅kg⁻¹(NaCl). A typical increase in surface charge was observed with increasing temperature. There was no correlation between the radius of the cations, Li⁺, Na⁺, K⁺ and (CH₃)₄N⁺, and the magnitude of their association with the surface. The combined results were treated with a 1-pK_a MUSIC model, which yielded association constants for the cations (and chloride ion at low pH) at each temperature. The pH of zero-point-charge, pH_zpc, decreased with increasing temperature as found for other metal oxides, reaching an apparent minimum value of 4.1 by 250 °C. Batch experiments were performed to monitor the concentration of LiOH in solutions containing suspended ZrO₂ particles from 200 to 360 °C. At 350 and 360 °C, Li⁺ and OH⁻ ions were almost totally adsorbed when the pressure was lowered to near saturation vapor pressure. This reversible trend has implications not only to pressure-water reactor, PWR, operations, but is also of general scientific and other applied interest. Additional experiments probed the feasibility that boric acid/borate ions adsorb reversibly onto ZrO₂ surfaces at near-neutral pH conditions as indicated in earlier publications. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Inorganic membrane selectivity to ions in relation with streaming potential

The streaming potential, permeate flux and ion transmission are measured on an inorganic ultra filtration membrane (ZrO₂). The streaming potential depends on charge distribution, which is modified by changing the pH, the ionic strength, and the nature of ions. This study points out the effect of membrane net charge on ion transmission for monovalent and divalent salt filtration (NaCl and CaCl₂), even in the case of large pore radius (2 nm, MWCO=10 000 g/mol) compared to the ionic radius in the case of the tangential filtration. The filtration of a mixture of both the salts put into the fore that sodium ion transmission is slowed down when calcium is present in solution because of the relative ion mobility.     

Mechanosynthesis of nanopowders of the proton-conducting electrolyte material Ba(Zr, Y)O3−δ

The formation of perovskite nanopowders of the common proton-conducting, electrolyte material Ba(Zr_1−xY_x)O_3−δ is demonstrated by room temperature mechanosynthesis for the compositional range x=0, 0.058 and 0.148. This is achieved with a planetary ball mill at 650 rpm in zirconia vials, starting from BaO₂ with ZrO₂, (ZrO₂)_0.97(Y₂O₃)_0.03 or (ZrO₂)_0.92(Y₂O₃)_0.08 precursors, respectively. Powder X-ray diffraction (XRD) reveals the formation of the perovskite phase in the early stages of milling with phase purity being achieved after milling times of 240 min for composition x=0.058 whereas 420 min is necessary for composition x=0.148. In contrast, traces of ZrO₂ are apparent in composition x=0 even after milling times of 420 min. The use of BaCO₃ as precursor does not allow the formation of the perovskite phase for any composition. The perovskite crystallites are spherical in shape with an average size determined from XRD of ca. 30 nm in agreement with transmission electron microscopy observations. FTIR spectra demonstrate that contamination levels of BaCO₃ in the mechanosynthesized powders are very low. The spherical shape and nanoscale of the crystallites allow densification levels that are highly competitive when compared to BaZrO₃-based materials formed by alternative synthesis techniques documented in the literature.     

Thermophysical properties of 1-hexyl-3-methyl imidazolium based ionic liquids with tetrafluoroborate, hexafluorophosphate and bis(trifluoromethylsulfonyl)imide anions

The thermophysical properties of 1-hexyl-3-methyl imidazolium based hydrophobic room temperature ionic liquids (RTILs); with tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethylsulfonyl)imide (Tf₂N) anions, namely density ρ (298.15 to 348.15) K, dynamic viscosity η (288.2 to 348.2) K, surface tension σ (298.15 to 338) K, and refractive index n_D (302.95 to 332.95) K have been measured. The coefficients of thermal expansion α_p values were calculated from the experimental density data using an empirical correlation. The thermal stability of all ILs is also investigated at two different heating rates (10 and 20) °C · min⁻¹) using thermogravimetric analyzer (TGA). The experimental results presented in this study reveal that the choice of anion type shows the most significant effect on the properties of ILs. The chloride and water contents of ILs (as impurities) are also investigated and reported in the present work.     

Surfactant-Free Synthesis of Three-Dimensional Perovskite Titania-Based Micron-Scale Motifs Used as Catalytic Supports for the Methanol Oxidation Reaction

We synthesized and subsequently rationalized the formation of a series of 3D hierarchical metal oxide spherical motifs. Specifically, we varied the chemical composition within a family of ATiO₃ (wherein “A” = Ca, Sr, and Ba) perovskites, using a two-step, surfactant-free synthesis procedure to generate structures with average diameters of ~3 microns. In terms of demonstrating the practicality of these perovskite materials, we have explored their use as supports for the methanol oxidation reaction (MOR) as a function of their size, morphology, and chemical composition. The MOR activity of our target systems was found to increase with decreasing ionic radius of the “A” site cation, in order of Pt/CaTiO₃ (CTO) > Pt/SrTiO₃ (STO) > Pt/BaTiO₃ (BTO). With respect to morphology, we observed an MOR enhancement of our 3D spherical motifs, as compared with either ultra-small or cubic control samples. Moreover, the Pt/CTO sample yielded not only improved mass and specific activity values but also a greater stability and durability, as compared with both commercial TiO₂ nanoparticle standards and precursor TiO₂ templates.     

Neue Alkalimetallorthonitrate und ihre schwingungsspektroskopische Charakterisierung

New Alkali Metal Orthonitrates nad their Characterization by Vibrational Spectroscopy For the first time the alkali metal orthonitrates Rb₃NO₄, Cs₃NO₄, AA′₂NO₄ (A,A′=Na, K, Rb), A₃A′₃(NO₄)₂ (A=K, Rb, Cs; A′=Na, K, Rb except Cs₃Na₃(NO₄)₂ and AA′₅(NO₄)₂ (A,A′=Na, K) have been prepared by solid state reactions of alkali metal oxides with alkali metal nitrates. All new compounds were proved to contain NO₄^3?-groups by vibrational spectroscopy. The wavenumbers of the fundamental vibrations are strongly depending on the radius of the cations in an unexpected amount.     

Thin-layer chromatographic behavior of rare earths on silica gel with aqueous alkaline earth metal nitrate solutions as mobile phases

The TLC behavior of all the rare earths except Pm has been surveyed on silica gel (pH 7.0) pretreated with 0.1 mol L^–1 tris(hydroxymethyl)aminomethane and 0.1 mol L^–1 HCl with aqueous nitrate solutions of alkaline earth metals as mobile phases. The R_F values of the lanthanides varied in a regular and characteristic way accompanied by the tetrad effect with increasing atomic number, and when the mobile phases were changed the R_F values of each metal decreased in the order Mg²⁺ > Ca²⁺ > Sr²⁺ > Ba²⁺, as the crystal ionic radii of the alkaline earth metals increased. This adsorption sequence was not observed with alkali metal nitrate and alkali metal chloride mobile phases. A brief discussion concerning the effect on R_F values of the solvent cations and the adsorption mechanism is included; also presented are typical chromatograms for the separation of multi-component mixtures containing adjacent lanthanides. Received: 9 October 2000 / Revised: 20 February 2001 / Accepted: 26 February 2001     

Präparative,röntgenographische und 1 H-Breitlinienresonanzuntersuchungen an Germylalkaliverbindungen,GeH 3 M

Preparation, X-Ray and 1 H-Wide-Line-Resonance Studies of Alkali Germyl Compounds, GeH ₃ M The alkali germyls GeH ₃ M (M = Li, Na, K, Rb, Cs) have been prepared from germane and the corresponding alkali metals. GeH ₃ K, GeH ₃ Rb and GeH ₃ Cs could be obtained as crystalline solids. It has been shown from X-ray single-crystal studies that GeH ₃ Cs has a structure of the TlI-type with the unusual coordination number 7. 1 H-wide-line-resonance investigations show that the rotations of the germyl groups are frozen in at low temperatures. From the observed 2. moment of the fixed germyl groups a H? Ge? H valence augle of 92.5±4°has been determined.