Effect of capillary cross-section geometry and size on the separation of proteins in gradient mode using monolithic poly(butyl methacrylate-co-ethylene dimethacrylate) columns

Porous polymer monoliths have been prepared in capillaries with circular or square cross-sections and lateral dimensions of 50, 75, 100 μm as well as in a rectangular 38 μm × 95 μm capillary. These capillaries have been used to determine the effect of the size and shape of their cross-section on the porous and hydrodynamic properties of poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths. The capillaries were studied by scanning electron microscopy and evaluated for their permeability to flow and their performance in the liquid chromatographic separation of a protein mixture comprising ribonuclease A, cytochrome c, myoglobin, and ovalbumin using a linear gradient of acetonitrile in the mobile phase. No differences resulting from channel geometry were found for the various capillary columns. These results demonstrate that standard capillaries with circular geometry are a good and affordable alternative conduit for modeling the processes carried out in microfluidic chips with a variety of geometries.     

Electroosmotic Flows Created by Surface Defects in Capillary Electrophoresis

We compute the electroosmotic flow in nonuniformly charged planar and cylindrical capillaries for the limit of low-Reynolds-number flows and thin Debye layers. Analytical formulae for the velocity field are provided for the general case of an arbitrary surface inhomogeneity but we also focus on various specific defect geometries. Many important features can be obtained from the simple lubrication approximation. The pressure jump induced by the presence of such surface defects is calculated and the possible occurrence of recirculating flows is discussed, as are effects of the flow perturbations on dispersion in capillary electrophoresis. Copyright 1999 Academic Press.     

Liquid transport in rectangular microchannels by electroosmotic pumping

The characteristics of electroosmotic flow in rectangular microchannels were investigated in this paper. A 2D Poisson–Boltzmann equation and the 2D momentum equation were used to model the electric double layer field and the flow field. The numerical solutions show significant influences of the channel cross-section geometry (i.e. the aspect ratio) on the velocity field and the volumetric flow rate. Also, the numerical simulation of the electroosmotic flow reveals how the velocity field and the volumetric flow rate depend on the ionic concentration, zeta potential, channel size and the applied electrical field strength.     

Capillary-driven flow in corner geometries

Wetting of corner-containing geometries is ubiquitous, since the man-made surfaces and natural surfaces are usually not atomically smooth and contain pores, grooves, and cracks. In spite of the very long history of the research of capillary phenomena, the most attention was paid to capillary rise in cylindrical capillaries leaving the rich physics of the capillary transport of the liquids in the corner geometries unravelled. The present work aims to review the progress in studying of wetting of corner-containing geometries: isolated corners, rectangular channels, and confined angular geometries. The review is believed to be of interest for readers from fields such as oil and gas industry, space science, biophysics, and microfluidics.     

矩形截面毛细管电泳和二维分离

在石英单晶表面制成矩矩截面毛细管柱中进行电泳实验。由于矩形柱比圆形柱有更大散热侧面积且石英单晶的导热性能远无于熔融石英，所以可施加较高的场强，不仅提高了柱效，而且缩矩了分离时间。两相交的通道之间形成自然连接，可实现二维分离，并消除死体积。     

Novel dynamic polymer coating for capillary electrophoresis in nonaqueous methanolic background electrolytes.

Coated capillaries can be advantageous in many capillary electrophoretic applications where nonaqueous background electrolytes are used. In the present work, a new dynamic polymer coating (poly(glycidylmethacrylate-co-N-vinylpyrrolidone)) for methanol-based background electrolytes is introduced. The magnitude and stability of electroosmotic flow was investigated with coated capillaries at pH* values of 3, 7.8, and 10.4 in methanol. At pH* 7.8 and 10.4 the electroosmotic flow was negligible and repeatable. On the other hand, at pH* 3 a weak, unstable electroosmotic flow was observed, due to a change in the conformation of the polymer under acidic conditions. The dynamically coated capillaries were successfully applied to the separations of cationic drugs, phenols, and benzoic acids. The synthesis and characterization of the polymer are described in detail.     

平面二维毛细管电泳初探

在石英单晶表面制成短形截面的毛细管柱上进行了电泳实验。由于矩形柱比国形住有更大散热侧面积且石英单晶的导热性能远远优于熔融石英,所以可施加较高的场强,不仅提高了住效,而且缩短了分离时间。两个相交的通道之间形成自然连接,可实现二维分离,并消除了死体积。     

Optimal MEMS device for mobility and zeta potential measurements using DC electrophoresis

We have developed a novel microchannel geometry that allows us to perform simple DC electrophoresis to measure the electrophoretic mobility and zeta potential of analytes and particles. In standard capillary geometries, mobility measurements using DC fields are difficult to perform. Specifically, measurements in open capillaries require knowledge of the hard to measure and often dynamic wall surface potential. Although measurements in closed capillaries eliminate this requirement, the measurements must be performed at infinitesimally small regions of zero flow where the pressure driven‐flow completely cancels the electroosmotic flow (Komagata Planes). Furthermore, applied DC fields lead to electrode polarization, further questioning the reliability and accuracy of the measurement. In contrast, our geometry expands and moves the Komagata planes to where velocity gradients are at a minimum, and thus knowledge of the precise location of a Komagata plane is not necessary. Additionally, our microfluidic device prevents electrode polarization because of fluid recirculation around the electrodes. We fabricated our device using standard MEMS fabrication techniques and performed electrophoretic mobility measurements on 500 nm fluorescently tagged polystyrene particles at various buffer concentrations. Results are comparable to two different commercial dynamic light scattering based particle sizing instruments. We conclude with guidelines to further develop this robust electrophoretic tool that allows for facile and efficient particle characterization.     

Confinement effects on the morphology of photopatterned porous polymer monoliths for capillary and microchip electrophoresis of proteins

We find that the morphology of porous polymer monoliths photopatterned within capillaries and microchannels is substantially influenced by the dimensions of confinement. Porous polymer monoliths were prepared by UV-initiated free-radical polymerization using either the hydrophilic or hydrophobic monomers 2-hydroxyethyl methacrylate or butyl methacrylate, cross-linker ethylene dimethacrylate and different porogenic solvents to produce bulk pore diameters between 3.2 and 0.4 microm. The extent of deformation from the bulk porous structure under confinement strongly depends on the ratio of characteristic length of the confined space to the monolith pore size. The effects are similar in cylindrical capillaries and D-shaped microfluidic channels. Bulk-like porosity is observed for a confinement dimension to pore size ratio >10, and significant deviation is observed for a ratio <5. At the extreme limit of deformation a smooth polymer layer 300 nm thick is formed on the surface of the capillary or microchannel. Surface tension or wetting also plays a role, with greater wetting enhancing deformation of the bulk structure. The films created by extreme deformation provide a rapid and effective strategy to create robust wall coatings, with the ability to photograft various surface chemistries onto the coating. This approach is demonstrated through cationic films used for electroosmotic flow control and neutral hydrophilic coatings for electrophoresis of proteins.     

金纳米微粒修饰毛细管电泳分离蛋白质的研究

报道了金纳米微粒(Au NP)修饰毛细管电泳分离蛋白质的方法.采用物理吸附法将Au NP修饰在熔融石英毛细管内表面,制备成Au NP修饰毛细管.探讨了修饰剂Au NP的浓度对电渗流及蛋白质分离的影响.结果表明,Au NP修饰的毛细管能有效地抑制电渗流及蛋白质在毛细管内壁上的吸附,提高分离效率.在优化的实验条件下,实现了...     

Porous glass electroosmotic pumps: theory

This paper presents an analytical study of electroosmotic (EO) pumps with porous pumping structures. We have developed an analytical model to solve for electroosmotic flow rate, pump current, and thermodynamic efficiency as a function of pump pressure load for porous-structure EO pumps. The model uses a symmetric electrolyte approximation valid for the high-zeta-potential regime and numerically solves the Poisson-Boltzmann equation for charge distribution in the idealized pore geometry. Generalized scaling of pumping performance is discussed in the context of a parameterization that includes porosity, tortuosity, pore size, bulk ionic density, and the nonuniform conductivity distribution over charge layers. The model also incorporates an approximate ionic-strength-dependent zeta potential formulation.     

Capillary zone electrophoresis on chemically bonded imidazolium based salts

In the present paper, fused-silica capillaries were chemically modified with an analogue of the imidazole-based ionic liquid and zwitterionic salt. The coated capillaries were examined for the behavior of the electroosmotic flow in both aqueous and non-aqueous electrolytes. The electroosmotic flow in the capillary coated with an ionic liquid analogue was found to be anodic (reversed) and dependent on the pH of the separation buffer. In the case of a zwitterionic capillary, the electroosmotic flow was cathodic and its velocity remained almost constant in the pH range of 4-7. The zeta-potentials of the modified surfaces were also calculated. The effectiveness of coating was investigated by comparing a separation of five inorganic ions and seven alkylphosphonic acids/monoesters in the modified and uncoated capillaries. All separations were successfully carried out in simple buffers and completed during a short analysis time. Finally, the run-to-run and day-to-day reproducibility of the coated capillaries in terms of the migration time of a neutral marker was determined.     

On the pH hysteresis of electroosmotic mobility with capillary zone electrophoresis in silica capillary

Summary A porous gel model of silica-solution interface was proposed to explain the pH hysteresis effect on the electroosmotic mobility with capillary zone electrophoresis in silica capillaries. It is speculated that, under acidic preconditionings of the capillaries, a porous gel layer is formed at the silica-solution interface, and the magnitudes of potential and electroosmotic mobility are then reduced due to the penetration of electrolyte counterions to the gel layer. On the other hand, under basic preconditionings, a fresh silica surfaces is created by dissolution of silica in alkaline conditions, and this would result in higher values of potential and electroosmotic mobility. The Guoy-Chapman-Stern-Grahame model was employed to simulate the pH-dependence of electroosmotic mobility for the silica capillaries with a gelling surface and with a fresh surface. The predicted data were compared with the experimental results and shown to support the explanation.     

The use of etched,chemically modified,rectangular capillaries as a separation medium for open tubular capillary electrochromatography

The use of etched, chemically modified, capillaries with a rectangular inner channel for open tubular electrochromatography is investigated. Comparisons of separation capabilities are made between circular and rectangular capillaries undergoing the same etching and chemical modification processes. With the long dimension of the rectangular column aligned in the direction of the optical light path, the relative sensitivities of the two capillary geometries are evaluated. The electrochromatographic properties of two catechins found in tea are investigated on the rectangular etched octadecyl-modified capillary.     

高效毛细管电泳中的电渗研究

高效毛细管电泳(HPCE)是近年来发展起来的一种新型高效分离技术。它具有分离速度快、效率高、重复性好等特点,受到国内外学术界的关注。电渗是影响HPCE分离效率的重要因素,如何抑制电渗对分离效率的影响是人们研究的重要内容。本文对石英毛细管在高压电场中的电渗性能进行了多因素的研究。结果表明,综合优化实验条件可以改变电     

A two‐step method for rapid characterization of electroosmotic flows in capillary electrophoresis

The measurement of electroosmotic flow (EOF) is important in a capillary electrophoresis (CE) experiment in terms of performance optimization and stability improvement. Although several methods exist, there are demanding needs to accurately characterize ultra‐low electroosmotic flow rates (EOF rates), such as in coated capillaries used in protein separations. In this work, a new method, called the two‐step method, was developed to accurately and rapidly measure EOF rates in a capillary, especially for measuring the ultra‐low EOF rates in coated capillaries. In this two‐step method, the EOF rates were calculated by measuring the migration time difference of a neutral marker in two consecutive experiments, in which a pressure driven was introduced to accelerate the migration and the DC voltage was reversed to switch the EOF direction. Uncoated capillaries were first characterized by both this two‐step method and a conventional method to confirm the validity of this new method. Then this new method was applied in the study of coated capillaries. Results show that this new method is not only fast in speed, but also better in accuracy.     

Electrophoretic separation of linear and supercoiled DNA in uncoated capillaries.

We report electrophoretic separation of supercoiled plasmids (2-16 kilo base pairs) and linear double-stranded DNA (0.6-23 kilo base pairs) in uncoated capillaries filled with dilute hydroxyethylcellulose. Because electroosmotic flow reverses the order of elution, long plasmids spend less time in the capillary and their bandwidths are narrower than observed in coated capillaries. However, resolution is similar to that obtained in coated capillaries, because it is governed by the distribution of unresolved topoisomers. In the presence of electroosmotic flow migration of supercoiled plasmids does not follow the elastic rod model that has been observed in coated capillaries.     

Electroosmotic flow in a capillary annulus with high zeta potentials

The electroosmotic flow through an annulus is analyzed under the situation when the two cylindrical walls carry high zeta potentials. The analytical solutions for the electric potential profile and the electroosmotic flow field in the annulus are obtained by solving the Poisson-Boltzmann equation and the Stokes equation under an analytical scheme for the hyperbolic sine function. A mathematical expression for the average electroosmotic velocity is derived in a fashion similar to the Smoluchowski equation. Hence, a correction formula is introduced to modify the Smoluchowski equation, taking into account contributions due to the finite thickness of the electric double layer (EDL) and the geometry ratio-dependent correction. Specifically, under a circumstance when the two annular walls are oppositely charged, the flow direction can be determined from the sign of such correction formula, and there exists a zero-velocity plane inside the annulus. With the assumption of large electrokinetic diameters, the location of the zero-velocity plane can be estimated from the analytical expression for the velocity distribution. In addition, the characteristics of the electroosmotic flow through the annulus are discussed under the influences of the EDL parameters and geometric ratio of the inner radius to the outer radius of the annulus.     

Coupled fused silica capillaries for rapid capillary zone electrophoresis of proteins

A novel two-dimensional electrophoretic system for the control of electroosmosis in capillary zone electrophoresis has been developed and evaluated for rapid separations of proteins. The system comprises uncoated and polyether-coated fused silica capillaries coupled in series. An equation relating the average electroosmotic flow velocity in the coupled capillaries to the intrinsic electroosmotic velocities of the connected segments and their corresponding lengths has been derived and verified experimentally. This approach has the advantage of enabling the electroosmotic flow to be tuned independently of the applied voltage. As a consequence, rapid protein analysis at relatively low field strength was achieved without sacrificing the high separation efficiencies obtained with surface-modified capillaries.     

Separation of peptides and proteins by capillary electrophoresis using acidic buffers containing tetraalkylammonium cations and cyclodextrins

A method for improving separations of peptides and other positively charged species in capillary zone electrophoresis with untreated capillaries using acidic buffers containing tetraalkylammonium cations is described. Tetramethylammonium and tetrabutylammonium cations dynamically modify the capillary surface, leading to a reversal in the direction of the electroosmotic flow. As a result, the adsorption of positively charged peptides and proteins is minimized, and resolution and peak capacity are improved as the migration of cationic analytes is counterbalanced by the electroosmotic flow. The combining effect of reversing electroosmotic flow and cyclodextrin inclusion complexation on separations of closely related peptides and a protein mixture, as well as tryptic digest of hemoglobin is demonstrated.