Novel cyanoterphenyl self-assembly monolayers on Au(111) studied by ellipsometry, x-ray photoelectron spectroscopy, and vibrational spectroscopies

The self-assembled monolayers (SAMs) of two asymmetric disulfides derivatives (namely, LC1 and LC2) were prepared on Au(111). The disulfides contain a pure alkyl chain and an alkyl chain terminated by a cyanoterphenyl group. LC1 and LC2 differ by the way the cyanoterphenyl group is attached onto the alkyl chain: it is expected to be aligned with the alkyl chain in the case of LC1 and perpendicular to it in the case of LC2 (T shape). The consequences in terms of surface coverage, chemical composition, and molecular conformation of the two SAMs are studied using ellipsometry, x-ray photoelectron spectroscopy (XPS), reflection absorption infrared spectroscopy (RAIRS), and broadband femtosecond sum-frequency generation (SFG). A model of coverage and tilt angle based on ellipsometry and XPS results shows that the SAM "manages" the large size of the terphenyl group by lowering the terphenyl containing chain coverage and by increasing the tilt. In the case of LC2, the disulfide breaks during molecular assembly, less terphenyl chains adsorb than pure alkyl chains, and the overall chain coverage is smaller than for LC1. RAIRS and SFG results show that these differences in surface coverage correspond to a drastically different orientation of the terphenyl axis, which lies nearly parallel to the surface for LC2, while it is tilted by approximately 28 degrees for LC1. This shows that the terphenyl group takes much more space on the surface in the case of LC2 and explains why the terphenyl coverage is found smaller for LC2. The anomalous SFG relative intensities observed in the region of CH stretch between CH2 and CH3 modes, and symmetric and antisymmetric modes, show that the chains are not in the fully stretched, all-trans conformation, LC2 being probably more distorted than LC1. These distorsions allow the molecules to occupy the space available below the large terphenyl group. The relative intensities of symmetric and antisymmetric modes are discussed qualitatively for some typical molecular conformations and orientations of the alkyl chain.     

Self-assembled monolayers derived from alkoxyphenylethanethiols having one, two, and three pendant chains

This article describes the design, synthesis, and study of alkoxyphenylethanethiol-based adsorbates with one (R1ArMT), two (R2ArMT), and three (R3ArMT) pendant octadecyloxy chains substituted at the 4-, 3,5-, and 3,4,5-positions, respectively, of the phenylethanethiol group. These adsorbates are being developed for use in the preparation of compositionally versatile "mixed" self-assembled monolayer (SAM) coatings. The resultant SAMs were characterized by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). The studies revealed that R1ArMT generates a well-ordered monolayer film, while R2ArMT and R3ArMT generate monolayer films with diminished conformational order in which the degree of crystallinity decreases as follows: C18 ～ R1ArMT > R3ArMT > R2ArMT. In addition, comparison of the molecular and chain packing densities of SAMs derived from these new adsorbates reveals that the R2ArMT and R3ArMT adsorbates give rise to SAMs with reduced chain tilt and smaller surface area per chain when compared to the SAMs derived from C18 and R1ArMT.     

Alkanethiols on platinum: multicomponent self-assembled monolayers

We have studied the formation of self-assembled monolayers (SAMs) of n-alkanethiols on platinum thin films using X-ray photoelectron spectroscopy (XPS), reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and contact angle (CA) measurements. Specifically, SAMs of 1-hexanethiol, 1-dodecanethiol, and 1-octadecanethiol were grown on polycrystalline Pt films, and the effects of Pt surface preparation, deposition conditions, and solvent treatments on the initial quality and stability of the monolayer in air were investigated. The SAMs prepared under ambient conditions on piranha-cleaned and UV/ozone-cleaned substrates were compared to monolayers formed on template-stripped Pt in an inert atmosphere. We found that alkanethiols deposited from 1 mM ethanolic solutions on piranha-cleaned Pt formed densely packed monolayers in which alkyl chains were oriented close to the surface normal. Stored in the laboratory ambient, these monolayers were unchanged over about 1 week but were largely oxidized in about 1 month. No evidence was found of molecules being weakly bound within the monolayer or having undergone C-S bond scission; however, three distinct sulfur states were observed for all samples in the XPS of the S 2p region. The lowest- and highest-binding-energy components are assigned to alkylthiolate and partially oxidized alkylthiolate species, respectively. The remaining S 2p component (approximately one-third of the sulfur layer), intermediate in binding energy between the other two components, is attributed to a chemisorbed species with a S binding configuration distinct from the majority alkylthiolate: for example, S bound to Pt bound to O, S with a different Pt coordination number, or S in an adsorbed disulfide.     

Influence of alkyl chain length on phosphate self-assembled monolayers

A series of alkyl phosphates with alkyl chain lengths ranging from C10 to C18 have been synthesized. Self-assembled monolayers (SAMs) of these molecules were prepared on titanium oxide surfaces by immersion of the substrates in alkyl phosphate solutions of 0.5 mM concentration in n-heptane/isopropanol. The SAMs were characterized by means of dynamic water contact angle (dCA) measurements, variable-angle spectroscopic ellipsometry (VASE), X-ray photoelectron spectroscopy (XPS), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). A higher degree of order and packing density within the monolayers was found for alkyl phosphates with alkyl chain lengths exceeding 15 carbon atoms. This is reflected in a lower dCA hysteresis, as well as a film thickness measured by VASE and XPS close to the expected values for SAMs with an average alkyl chain tilt angle of 30 degrees to the surface normal. Additionally a shift of the symmetric and antisymmetric C-H stretching modes in the PM-IRRAS spectra to lower wave numbers was observed. These findings imply a higher two-dimensional crystallinity of the films derived from alkyl phosphates with a longer alkyl chain length.     

Self-assembled monolayers derived from a double-chained monothiol having chemically dissimilar chains

The structure and conformation of self-assembled monolayers (SAMs) derived from the adsorption of a specifically designed double-chained partially fluorinated thiol having the formula 12,12,13,13,14,14,15,15,16,16,17,17,18,18,19,19,19-heptadecafluoro -2-tetradecylnona-decane-1-thiol ( 2) onto the surface of evaporated gold were examined by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). The results were compared to those of SAMs generated from normal hexadecanethiol ( 1) and a structurally related single-chained partially fluorinated thiol having the formula 12,12,13,13,14,14,15,15,16,16,17,17,18,18,19,19,19-heptadecafluorononadecane-1-thiol ( 3). Collectively, the studies demonstrate that the double-chained adsorbate 2 forms SAMs on gold in which the alkyl chains are less densely packed and less conformationally ordered than those in the SAMs derived from each of the single-chained adsorbates. Furthermore, the fluorocarbon moieties in the SAMs derived from 2 are more tilted from the surface normal than those in the SAMs derived from 3. The low values of contact angle hysteresis suggest, however, that the double-chained adsorbate 2 generates homogeneous monolayer films on the surface of gold.     

Structural and chemical characterization of monofluoro-substituted oligo(phenylene-ethynylene) thiolate self-assembled monolayers on gold

Monolayers of oligo(phenylene-ethynylene) (OPE) molecules have exhibited promise in molecular electronic test structures. This paper discusses films formed from a novel molecule within this class, 2-fluoro-4-phenylethynyl-1-[(4-acetylthio)phenylethynyl]benzene (F-OPE). The conditions of self-assembled monolayer (SAM) formation were systematically altered to fabricate reproducible high-quality molecular monolayers from the acetate-protected F-OPE molecule. Detailed characterization of the F-OPE monolayers was performed by using an array of surface probes, including reflection absorbance infrared spectroscopy (RAIRS), contact angle (CA) measurements, spectroscopic ellipsometry (SE), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and atomic force microscopy (AFM). XPS and RAIRS established that the SAM formed without removal of the F substituent and without oxidation of the thiol. The monolayer thickness, determined from SE and AFM based nanolithography, was consistent with the formation of a densely packed monolayer. The valence electronic structure of the SAM was consistent with an aromatic structure shifted by the electron-withdrawing fluorine substituent and intermolecular coupling within an oriented array of molecules.     

Loosely packed self-assembled monolayers on gold generated from 2-alkyl-2-methylpropane-1,3-dithiols

A series of 2-alkyl-2-methylpropane-1,3-dithiol derivatives with increasing alkyl chain lengths (i.e., CH3(CH2)mC(CH3)[CH2SH]2, where m = 7, 9, 11, 13, 15) were synthesized and used to generate self-assembled monolayers (SAMs) on gold. The resulting monolayers were analyzed by ellipsometry, contact angle goniometry, polarization modulation infrared reflection-absorption spectroscopy, and X-ray photoelectron spectroscopy. These data were compared with those obtained on SAMs on gold derived from normal alkanethiols (CH3(CH2)(m+2)SH) and 2-monoalkylpropane-1,3-dithiols (CH3(CH2)(m)CH[CH2SH]2) having the same number of carbon atoms in the primary chain. The results demonstrate that the 2-alkyl-2-methylpropane-1,3-dithiols generate conformationally disordered monolayer films in which the density of alkyl chains is less than those generated from normal alkanethiols and the 2-monoalkylpropane-1,3-dithiols.     

Characterization of self-assembled monolayers of thiols on Au(111)

Self-assembled monolayers (SAMs) of n-butanethiol, n-dodecanethiol and their equimolar mixture on Au(111) were prepared and characterized by ellipsometry, contact angle measurement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results revealed that these SAMs are oriented ultrathin films with the thickness of nanometer scale, and the SAMs were influenced by the molecular chain length, the lattice orientation and cleanliness of the substrates. The surface of the longer chain SAM is hydrophobic. The thicknesses of three SAMs of n-butanethiol, n-dodecanethiol and their mixture revealed by ellipsometry and XPS are about 0.59 - 0.67nm, 1.60- 1.69 nm and 1.23 - 1.32nm, respectively. AFM images further demonstrated that the SAM formed by the mixture has some microdomains with two different thicknesses.     

Near-edge X-ray absorption fine structure spectroscopy of diamondoid thiol monolayers on gold

Diamondoids, hydrocarbon molecules with cubic-diamond-cage structures, have unique properties with potential value for nanotechnology. The availability and ability to selectively functionalize this special class of nanodiamond materials opens new possibilities for surface modification, for high-efficiency field emitters in molecular electronics, as seed crystals for diamond growth, or as robust mechanical coatings. The properties of self-assembled monolayers (SAMs) of diamondoids are thus of fundamental interest for a variety of emerging applications. This paper presents the effects of thiol substitution position and polymantane order on diamondoid SAMs on gold using near-edge X-ray absorption fine structure spectroscopy (NEXAFS) and X-ray photoelectron spectroscopy (XPS). A framework to determine both molecular tilt and twist through NEXAFS is presented and reveals highly ordered diamondoid SAMs, with the molecular orientation controlled by the thiol location. C 1s and S 2p binding energies are lower in adamantane thiol than alkane thiols on gold by 0.67 +/- 0.05 and 0.16 +/- 0.04 eV, respectively. These binding energies vary with diamondoid monolayer structure and thiol substitution position, consistent with different degrees of steric strain and electronic interaction with the substrate. This work demonstrates control over the assembly, in particular the orientational and electronic structure, providing a flexible design of surface properties with this exciting new class of diamond nanoparticles.     

Length dependence of charge transport in nanoscopic molecular junctions incorporating a series of rigid thiol-terminated norbornylogs

Four tetrathiol-terminated norbornane homologues were synthesized and self-assembled monolayers (SAMs) of these molecules were formed on Au via adsorption from CH2Cl2. SAMs were characterized structurally via spectroscopic ellipsometry (SE), reflection-absorption infrared spectroscopy (RAIRS), Rutherford backscattering spectrometry (RBS), and X-ray photoelectron spectroscopy (XPS). Results of these analyses show that the rigid norbornylogs form monolayers that have a surface coverage slightly lower than that of alkanethiols, and that they exhibit a nonmonotonic dependence of film thickness on molecular length. Nanoscale molecular junctions incorporating these SAMs were formed and characterized electrically using conducting probe atomic force microscopy (CP-AFM). The resistances of these junctions scale exponentially with the contour length of the molecules, with beta = 0.9 A(-1), consistent with a nonresonant tunneling mechanism. Further, the resistance of norbornyl SAMs correlates well with the resistance of alkanedithiol SAMs of similar length, suggesting that the norbornyl molecules form sulfur-metal bonds on both ends of the junction.     

Optimizing the quality of monoreactive perfluoroalkylsilane-based self-assembled monolayers

Self-assembled monolayers (or SAMs) created from monoreactive perfluoroalkylsilanes by deposition from a toluene solution are investigated for the dependence of their quality on processing conditions. Surface-sensitive spectroscopic techniques are used to provide feedback on the processing conditions in which solution temperature, silane concentration, and reaction time are optimized to improve the quality of these SAMs. For these analyses, monolayers are formed at 20, 40, 60, or 80 °C from solutions containing between 0.5 and 5 mM perfluoroalkylsilane over a period of up to 5 h. Physically adsorbed molecules are removed from these surfaces by extraction to determine the quality of the covalently bound monolayer. Water contact angle measurements, spectroscopic ellipsometry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM), respectively, are used in combination to assess the uniformity of the surface hydrophobicity, monolayer thickness, composition of the assembled perfluoroalkylsilane molecules, and topography of these monolayers. A comparison is also presented for two approaches to fill defects within these solvent extracted monolayers with more perfluoroalkylsilane molecules, aiming to improve the quality of these SAMs. A detailed XPS analysis is used to assess both the relative changes in density and average tilt of molecules within the monolayers as the process temperature is increased in increments from 20 to 80 °C. The observed differences in quality of the SAMs are attributed to temperature- and time-dependent organization and reactivity of the silane molecules. Although the assembly of these monoreactive perfluoroalkylsilanes is driven by thermodynamics, the quality of the monolayer is ultimately limited by the kinetics and mass transport during this assembly process. Lessons from these studies can be exploited for improving the quality of monolayers composed of other alkylsilane molecules that are covalently bound to the surfaces of oxides.     

Factors that determine the protein resistance of oligoether self-assembled monolayers --internal hydrophilicity,terminal hydrophilicity,and lateral packing density

Protein resistance of oligoether self-assembled monolayers (SAMs) on gold and silver surfaces has been investigated systematically to elucidate structural factors that determine whether a SAM will be able to resist protein adsorption. Oligo(ethylene glycol) (OEG)-, oligo(propylene glycol)-, and oligo(trimethylene glycol)-terminated alkanethiols with different chain lengths and alkyl termination were synthesized as monolayer constituents. The packing density and chemical composition of the SAMs were examined by XPS spectroscopy; the terminal hydrophilicity was characterized by contact angle measurements. IRRAS spectroscopy gave information about the chain conformation of specific monolayers; the amount of adsorbed protein as compared to alkanethiol monolayers was determined by ellipsometry. We found several factors that in combination or by themselves suppress the protein resistance of oligoether monolayers. Monolayers with a hydrophobic interior, such as those containing oligo(propylene glycol), show no protein resistance. The lateral compression of oligo(ethylene glycol) monolayers on silver generates more highly ordered monolayers and may cause decreased protein resistance, but does not necessarily lead to an all-trans chain conformation of the OEG moieties. Water contact angles higher than 70 degrees on gold or 65 degrees on silver reduce full protein resistance. We conclude that both internal and terminal hydrophilicity favor the protein resistance of an oligoether monolayer. It is suggested that the penetration of water molecules in the interior of the SAM is a necessary prerequisite for protein resistance. We discuss and summarize the various factors which are critical for the functionality of "inert" organic films.     

Self-assembled monolayers of peptide nucleic acids on gold surfaces: a spectroscopic study

We have characterized self-assembled monolayers (SAMs) of thiol-derivatized peptide nucleic acid (PNA) chains adsorbed on gold surfaces by using reflection absorption infrared spectroscopy (RAIRS) and X-ray photoemission spectroscopy (XPS) techniques. We have found that the molecular orientation of PNAs strongly depends on surface coverage. At low coverage, PNA chains lie flat on the surface, while at high coverage, PNA molecules realign their molecular axes with the surface normal and form SAMs without the need of co-immobilization of spacers or other adjuvant molecules. The change in the molecular orientation has been studied by infrared spectroscopy and it has been confirmed by atomic force microscopy (AFM). PNA immobilization has been followed by analyzing the N(1s) XPS core-level peak. We show that the fine line shape of the N(1s) core-level peak at optimal concentration for biosensing is due to a chemical shift. A combination of the above-mentioned techniques allow us to affirm that the structure of the SAMs is stabilized by molecule-molecule interactions through noncomplementary adjacent nucleic bases.     

Chain orientation and headgroup structure in Langmuir monolayers of stearic acid and metal stearate (Ag, Co, Zn, and Pb) studied by infrared reflection-absorption spectroscopy

The monolayers of stearic acid at the air-water interface on pure water and ion-containing subphases have been studied using infrared reflection-absorption spectroscopy. In the presence of Co(2+), Zn(2+), and Pb(2+), ordered hydrocarbon chains and hexagonal subcell structure remain almost unchanged in comparison with those for the monolayer on pure water at the surface pressure of 20 m/Nm. In the cases of Co(2+) and Zn(2+), the H-bonded monodentate and unsymmetric bidentate chelating structure within the headgroups were formed, and in the case of Pb(2+), three types of structures, bidentate chelating, unsymmetric chelating, and bidentate bridging coordinations, were formed. The hydrocarbon chains in the monolayers are uniaxially oriented at a tilt angle of approximately 0 degrees with respect to the surface normal in contrast to a tilt angle of approximately 20 degrees on pure water surface at 20 m/Nm by the computer simulation of theoretical calculation to experimental data. In the presence of Ag(+), multilayers were developed with the highly ordered hydrocarbon chains in a triclinic subcell structure and a bidentate bridging structure within the headgroups. The multilayers were composed of three monolayers and the hydrocarbon chains in each monolayer were oriented at an angle of approximately 30 degrees away from the surface normal with their C-C-C planes almost perpendicular to the water surface.     

取代苯基硫脲在Au表面的自组装

制备了对甲苯基硫脲、对氯苯基硫脲和2，4，6-三溴苯基硫脲在Au表面的自组装单分子膜（SAMs），用润湿角测量仪、椭圆偏振仪、X-射线光电子能谱仪（XPS）和原子力显微镜（AFM）对单分子膜进行了分析表征。结果表明取代苯基硫脲分子的S原子与Au形成Au-S键而诱导吸附分子形成取向排列的单分子膜。由于Au表面本身具有一定的缺陷和吸附的可逆性，使得所形成的单分子膜具有一定的缺陷。     

Formation of dense self-assembled monolayers of (n-decyl)trichlorosilanes on Ta/Ta2O5

Tantalum pentoxide (Ta2O5) is a promising material for the realization of biological interfaces because of its high dielectric constant, its high chemical stability, and its excellent passivating properties. Nevertheless, the deposition of highly organized silane SAMs to realize well-defined and tailored Ta2O5-based (bio)interfaces, has not been studied in great detail as of yet. In this work, we have investigated the formation of a highly ordered, dense monolayer of trichlorosilanes on Ta2O5 surfaces. Specifically, two different cleaning procedures for Ta2O5 were compared and (n-decyl)trichlorosilane (DTS) was used to study the effect of both cleaning methods on the silanization of Ta2O5. Both types of cleaning allowed the formation of complete and crystalline DTS monolayers on Ta2O5, in contrast with the incomplete, disordered silane layer assembled on uncleaned Ta2O5. The deposited self-assembled monolayers were studied by means of contact angle goniometry, Brewster angle FTIR, X-ray photoelectron spectroscopy, cyclic voltammetry, and ellipsometry. Infrared analysis exhibited a highly ordered DTS silane film on Ta2O5 and indicated a larger tilt angle of the alkyl chains on this substrate by comparison to DTS on SiO2. Furthermore, with use of ellipsometry and XPS, the silane film thickness on Ta2O5 was determined to be substantially smaller than that reported in the literature for DTS on SiO2, supporting the observations of an increased tilt angle (approximately 45 degrees ) on Ta2O5 than on SiO2 (approximately 10 degrees ). By means of cyclic voltammetry, the formation of a dense, essentially pinhole-free, silane film was observed on the cleaned samples. In conclusion, the fully characterized and optimized procedure for the silanization of Ta2O5 surfaces with trichlorosilanes will allow the formation of well-defined, reproducible, and controllable chemical interfaces on Ta2O5.     

4-Mercaptophenylboronic acid SAMs on gold: comparison with SAMs derived from thiophenol, 4-mercaptophenol, and 4-mercaptobenzoic acid

We report the formation and characterization of self-assembled monolayers (SAMs) derived from the adsorption of 4-mercaptophenylboronic acid (MPBA) on gold. For comparison, SAMs derived from the adsorption of thiophenol (TP), 4-mercaptophenol (MP), and 4-mercaptobenzoic acid (MBA) were also examined. The structure and properties of the SAMs were evaluated by ellipsometry, contact-angle goniometry, polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), and X-ray photoelectron spectroscopy (XPS). Specifically, ellipsometry was used to assess the formation of monolayer films, and contact angle measurements were used to determine the surface hydrophilicity and homogeneity. Separately, PM-IRRAS was used to evaluate the molecular composition and orientation as well as the intermolecular hydrogen bonding within the SAMs. Finally, XPS was used to evaluate the film composition and surface coverage (i.e., packing density), which was observed to increase in the following order: TP < MP < MPBA < MBA. A rationalization for the observed packing differences is presented. The XPS data indicate further that ultrahigh vacuum conditions induce the partial dehydration of MPBA SAMs with the concomitant formation of surface boronic anhydride species. Overall, the analytical data collectively show that the MPBA moieties in the SAMs exist in the acid form rather than the anhydride form under ambient laboratory conditions. Furthermore, stability studies find that MPBA SAMs are surprisingly labile in basic solution, where the terminal B-C bonds are cleaved by the attack of hydroxide ion and strongly basic amine nucleophiles. The unanticipated lability observed here should be considered by those wishing to use MPBA moieties in carbohydrate-sensing applications.     

Preparation of End Grafted Polyacrylonitrile Brushes through Surface Confined Radical Chain Transfer Reaction

End grafted polyacrylonitrile (PAN) brush was prepared through surface initiated polymerization via the chain transfer process.The thiol-terminated monolayer and PAN brushes were characterized by FTIR,X-ray photoelectron spectroscopy(XPS),atomic force microscopy (AFM),ellipsometry and contact angle measurements etc.It is demonstrated that radical chain transfer reaction and surface initiated precipitate polymerization can used to prepare end-grafted polymer brushes.     

偶氮苯衍生物自组装单分子膜中的分子取响

利用反射红外光谱研究了金表面一系列具有不同碳链长度的偶氮苯巯基衍生物的自组装单分子膜.通过对比各向同性样品的透射谱和单分子膜的反射谱中各个吸收峰强度,定量地研究了分子中各部分的取向与分子结构的关系.我们分别提出了烷基链和偶氮基团取向计算的方法,利用该方法成功地求得了分子中各部分在膜的倾角.结果显示,当分子中烷基链长度增大时,碳链和偶氮苯基团相对于法线的倾斜逐渐加剧.这种倾角的变化归因于分子中碳链间范德华引力增大时,引起分子逐渐倾斜以达到最佳的范德华接触.同时研究发现,烷基链和偶氮基团受碳长度变化的影响并不相同.当分子中亚甲基数目增多时,烷基链的倾角迅速增大而偶氮苯倾角的增大则相对缓慢,这反映了它们在空间需求和本身刚性上的不同。     

Covalent attachment of a transition metal coordination complex to functionalized oligo(phenylene-ethynylene) self-assembled monolayers

We have investigated the reaction of tetrakis(dimethylamido)titanium, Ti[N(CH(3))(2)](4), with N-isopropyl-N-[4-(thien-3-ylethynyl) phenyl] amine and N-isopropyl-N-(4-{[4-(thien-3-ylethynyl) phenyl]ethynyl}phenyl) amine self-assembled monolayers (SAMs), on polycrystalline Au substrates. The structure of the SAMs themselves has also been investigated. Both molecules form SAMs on polycrystalline Au bound by the thiophene group. The longer-molecular-backbone molecule forms a denser SAM, with molecules characterized by a smaller tilt angle. X-ray photoelectron spectroscopy (XPS) and angle-resolved XPS have been employed to examine the kinetics of adsorption, the spatial extent of reaction, and the stoichiometry of reaction. For both the SAMs, adsorption is described well by first-order Langmuirian kinetics, and adsorption is self-limiting from T(s) = -50 to 30 degrees C. The use of angle-resolved XPS clearly demonstrates that the Ti[N(CH(3))(2)](4) reacts exclusively with the isopropylamine end group via ligand exchange, and there is no penetration of the SAM, followed by reaction at the SAM-Au interface. Moreover, the SAM molecules remain bound to the Au surface via their thiopene functionalites. From XPS, we have found that, in both cases, approximately one Ti[N(CH(3))(2)](4) is adsorbed per two SAM molecules.