A new Cu~(2+)-induced color reaction of a rhodamine derivative N-(3-carboxy)acryloyl rhodamine B hydrazide

A new rhodamine derivative,N-(3-carboxy)acryloyl rhodamine B hydrazide(CARB),has been synthesized,and its unusual spectroscopic reaction with Cu2+ has been investigated.The derivative exhibits a rapid and reversible non-fluorescent absorption upon coordination to Cu2+,which is a rather unusual phenomenon for rhodamine B derivatives.Stoichiometric measurements using the Job's method and the molar ratio method reveal that one CARB molecule combines two Cu2+ ions,and the two Cu2+ ions play different roles:one ...     

A new tripodal rhodamine B derivative as a highly selective and sensitive fluorescence chemosensor for copper(II)

A new tripodal rhodamine B derivative 2 was designed and synthesized by tripodal trialdehyde and rhodamine B hydrazide for the first time. This derivative could be used as a fluorescent chemosensor for the selective and sensitive determination of copper(II) in Tris-HCl buffer and ethanol aqueous mixed media. Under the optimum conditions described herein, fluorescence enhancement at 557/577 nm was linearly related to the concentration of copper(II) in the range of 0.10 to 10.00×10⁻⁵ mol·L⁻¹, with a correlation coefficient of R ²=0.9964 (n=15) and a detection limit of 1.129×10⁻⁷ mol·L⁻¹ (the relative standard deviation for five repeated measurements at 4.00×10⁻⁵ mol·L⁻¹ Cu(II) was 2.2%). The absorbance measurements at 557 nm were linearly related to the concentration of Cu(II) in the range of 0.50 to 25.00×10⁻⁵ mol·L⁻¹, with a correlation coefficient of R ²=0.9948 (n=13) and a detection limit of 3.338×10⁻⁷mol·L⁻¹. Supported by the Foundation of the Governor of Guizhou Province, China (Grant No. 200617) and the Talented Person Foundation of Guizhou University (Grant No. 2007039)     

Novel spectrofluorimetric method for the determination of sulfite with rhodamine B hydrazide in a micellar medium

A novel spectrofluorimetric method for the determination of sulfite using rhodamine B hydrazide as fluorogenic reagent in the presence of polyoxyethylene sorbitan monooleate (Tween 80) surfactant micelles is described. The method is based on the mixture of sulfite with rhodamine B hydrazide, a colorless, non-fluorescent substance in Tween 80 surfactant micelles which gives rhodamine B-like fluorescence emission. The fluorescence intensity increase is linearly related to the concentration of sulfite in the range 5-800 ng ml⁻¹ with a detection limit of 1.4 ng ml⁻¹ (3σ). The optimal conditions for the detection of sulfite are evaluated and the possible detection mechanism is also discussed. The method has been successfully applied to the determination of total sulfite in wines and compares well with the standard iodimetric method.     

Preparation of Pt/polypyrrole-ferrocene hydrogen peroxide sensitive electrode for the use as a biosensor

A polypyrrole electrode with ferrocene mediator is prepared and its sensitivity to hydrogen peroxide is investigated. The polypyrrole is deposited upon a 0.5 cm² Pt plate by the polymerization of pyrrole by scanning the electrode potential between 0.0 and 0.9 V at a scan rate of 50 mV/s. The platinum/polypyrrole-ferrocene (Pt/PPy-Fc) electrode is prepared by adding ferrocene to the coverage medium. The electrode’s sensitivity to hydrogen peroxide is investigated at room temperature using 0.025 M phosphate buffer at pH 7. The working potential is 0.7 V, the concentrations of pyrrole and ferrocene are 0.2 M and 10 mM. Polypyrrole was coated on the electrode surface within 26 cycles. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 2, pp. 160–164. The text was submitted by the authors in English.     

Nafion 膜固定的新亚甲基蓝为介体生物传感器

以Nafion膜固定的新亚甲基蓝为辣根过氧化物酶和玻碳电极间的电子传递介体,制成电流型单酶过氧化氢生物传感器和双酶葡萄糖生物传感器。探讨了工作电位、pH值、温度和干扰物质等对生物传感器的影响。     

An ultrasensitive iron(III)-complex based hydrogen peroxide electrochemical sensor based on a nonelectrocatalytic mechanism

In this communication, the first nonelectrocatalysis-type hydrogen peroxide electrochemical sensor is reported. The electroactive iron(III) diethylenetriaminepentaacetic acid (DTPA-Fe^III) complex is immobilized on the cysteamine (cys) modified nanoporous gold (NPG) films by covalent method. The immobilized DTPA-Fe^III complex quickly communicates an electron with the electrode. Upon addition of hydrogen peroxide, however, hydrogen peroxide inhibits the direct electron transfer of the DTPA-Fe^III complex due to the generation of nonelectroactive DTPA-Fe^III–H₂O₂ complex. Based on quenching mechanism, the first hydrogen peroxide electrochemical sensor based on a nonelectrocatalytic mechanism is developed. The novel hydrogen peroxide electrochemical sensor has the ultralow detection limit (1.0 × 10^–14 M) and wide linear range (1.0 × 10^–13 to 1.0 × 10^–8 M) with excellent reproducibility and stability.     

Electrochemical behavior of hydrogen peroxide sensor based on new methylene blue as mediator

A novel amperometric hydrogen peroxide sensor was proposed by co-immobilizing new methylene blue (NMB) and Horseradish peroxidase (HRP) on glassy carbon electrode through covalent binding. The electrochemical behavior of the sensor was studied extensively in 0.1 mol/L phosphate buffering solution (pH = 7.0). The experiments showed NMB could effectively transfer electrons between hydrogen peroxide and glassy carbon electrode. The electron transfer coefficient and apparent reaction rate constant were determined to be 0.861 and 1.27 s⁻¹. The kinetic characteristics and responses of sensor on H₂O₂ were investigated. The Michaelis constant is 8.27 mol/L and the linear dependence of current on H₂O₂ is in the range of 2.5–100 μmol/L. At the same time, the effects of solution pH, buffer capacity, and temperature on the sensor were examined. Translated from Chemistry, 2006, 23(8): 916–920 [译自: 化学通报]     

Using silica nanoparticles as a catalyst carrier to the highly sensitive determination of thiamine

The preparation and utilization of silica nanoparticles as a carrier of tetra-substituted carboxyl iron phthalocyanine (TCFePc, a novel mimetic peroxidase) is reported in this article. Compared with free TCFePc, the experimental results indicated that the TCFePc entrapped in silica nanoparticles exhibited an improved catalytic activity and good reusability. By using tetra-substituted carboxyl iron phthalocyanine-silica nanoparticles (TCFePc-SiO₂ Nps) to catalyze the oxidation reaction of thiamine by hydrogen peroxide, a new fluorimetric method was developed for the quantitative analysis of thiamine in pharmaceutical tablets. The influences of different conditions, such as the medium acidity, the reaction time and temperature, the concentrations of reagents and foreign substances, were all investigated. Under the optimum conditions, the calibration graph for thiamine was linear over the range of 5.0 × 10^− 9-1.0 × 10^− 6 mol L^− 1, with a detection limit of 2.0 × 10^− 9 mol L^− 1. The proposed method was successfully applied to the direct analysis of thiamine in two kinds of pharmaceutical tablets, and offered the advantages of simple pretreatment, rapid determination, high sensitivity and good reusability. Hence, as a carrier of the mimetic enzyme, the silica nanoparticles are effective for enzymatic reaction processes. This method is supposed to be hopeful for the determination of thiamine in other complex raw materials.     

Characterization of rhodamine B hydroxylamide as a highly selective and sensitive fluorescence probe for copper(II)

Rhodamine B hydroxylamide (1) is characterized as a highly selective and sensitive fluorescence probe for Cu²⁺. Under the optimized conditions, the probe exhibits specific absorbance-on and fluorescence-on responses to Cu²⁺ only. This remarkable property may allow Cu²⁺ to be detected directly in the presence of the other transition metal ions, and such an application has been demonstrated to human serum. The reaction mechanism is also investigated and proposed as that the hydroxylamide group of 1 binds Cu²⁺, and the subsequent complexation of Cu²⁺ displays a high catalytic activity for the hydrolytic cleavage of the amide bond, causing the release of fluorophore (rhodamine B) and thereby the retrievement of absorbance and fluorescence. The recovered fluorescence intensity is proportional to the concentration of Cu²⁺ in the range 1-20 μM. The detection limit for Cu²⁺ is 33 nM (k = 3). The reaction mechanism described here may be useful for developing excellent spectroscopic probes with cleavable active bonds for other analytes.     

Methylene green-mediated sensor highly sensitive to hydrogen peroxide based on entrapment of horseradish peroxidase in composite membrane of regenerated silk fibroin and poly(vinyl alcohol)

Introduction The detection and quantitative determination of hydrogen peroxide play importantrole in several fields including biochemistry and environmental chemistry.A highlysensitive H202 sensor is useful to fabricate sensor for various substances by combiningit with hydrogen peroxide—producing oxidases.‘Although electrochemical detection ofH202 has been made via its oxidation or reduction at a variety of electrode materials,these electrodes are susceptible to the interference from electr…     

Spectrofluorimetric determination of tannins based on their activative effect on the Cu(II) catalytic oxidation of rhodamine 6G by hydrogen peroxide

A simple and highly sensitive kinetic fluorimetric method is proposed for the determination of trace tannins, based on the activation of tannins on the oxidation of rhodamine 6G (Rh 6G) by hydrogen peroxide catalyzed by Cu(II) ion. The calibration graph was rectilinear in the range 0.08-1.28 mg l⁻¹ for tannin, the 3σ detection limit for tannin is 0.0455 mg l⁻¹. The relative standard deviation for 11 determinations of 0.4 mg l⁻¹ tannin is 0.96%. The proposed method has been successfully used to determine tannins in tea and Chinese gall. The results obtained were compared with those provided by the Folin-Ciocalteu method. This is the first procedure to be reported for the determination of tannins based on fluorimetric measurements.     

Tin(IV) bis(perfluoroalkanesulfonyl)amide complex as a highly selective Lewis acid catalyst for Baeyer-Villiger oxidation using hydrogen peroxide in a fluorous recyclable phase

Sn[N(SO₂C₈F₁₇)₂]₄ catalyst was shown to give an excellent yield and selectivity in a fluorous biphasic catalytic system for Baeyer-Villiger oxidation of cyclic ketones by 35% aqueous hydrogen peroxide, a green, safe and cheap oxidant. Furthermore, the catalyst was completely recovered and reused in the fluorous immobilized phase without loss of activity.     

Catalytic determination of nanogram amounts from iron(III) using its catalytic effect on the oxidation of sodium pyrogallol-5-sulphonate by hydrogen peroxide

A kinetic method is described for the determination of iron(III) based on its catalytic effect on the oxidation of sodium pyrogallol-5-sulphonate by hydrogen peroxide. The reaction was followed spectrophotometrically by measuring the rate of change in the absorbance of the coloured product at 436.8 nm. Nanogram amounts of iron(III) (2.0-75.0 ng cm(-3)) can be determined with good accuracy and reproducibility. The influence of foreign ions on the results was investigated and the method was found to be adequately selective. It has been applied satisfactorily to the determination of iron(III) in tap water samples. The kinetic parameters of both the catalysed and uncatalysed reactions are reported.     

Turn‐on fluorogenic and chromogenic detection of cations in complete water media with poly(N‐vinyl pyrrolidone) bearing rhodamine B derivatives as polymeric chemosensor

A hydrophobic organic monomer GRBE with a polymerizable methacrylester moiety had been synthesized by reaction of rhodamine B‐ethanediamine with glycidyl methacrylate. A water‐soluble polymeric chemosensor poly(VP‐GRBE) had been prepared via copolymerization with a hydrophilic comonomer (vinylpyrrolidone) and GRBE, which was able to sense environmentally poisonous cations in completely aqueous media. The chemosensor was a derivative of rhodamine B, which behaved as a fluorescent and chromogenic sensor toward various heavy cations, particularly Cr³⁺, Fe³⁺, and Hg²⁺. Titration curves of Cr³⁺, Fe³⁺, and Hg²⁺ were constructed using rapid, cheap, and widely available technique of fluorescence spectroscopies. The detection limits for Cr³⁺, Fe³⁺, or Hg²⁺ ions were found to be 2.20 × 10^?12, 2.39 × 10^?12, and 1.11 × 10^?12 mol/l in the same medium, respectively. Moreover, a colorimetric response from the polymeric chemosensor permitted the detection of Cr³⁺, Hg²⁺, or Fe³⁺ by “naked eye” because of the development of a pink or brown yellow color when Cr³⁺, Hg²⁺, or Fe³⁺ cations interacted with the copolymer in aqueous media. Copyright © 2015 John Wiley & Sons, Ltd.     

Catalytic activity of manganese(III)-oxazoline complexes in urea hydrogen peroxide epoxidation of olefins: The effect of axial ligands

The catalytic activity of two manganese(III)-oxazoline complexes [Mn(phox)₂(CH₃OH)₂]ClO₄ and Mn(phox)₃ (Hphox = 2-(2′-hydroxylphenyl)oxazoline), was studied in the epoxidation of various olefins. All of epoxidation reactions were carried out in (1:1) mixture of methanol:dichloromethane at room temperature using urea hydrogen peroxide (UHP) as oxidant and imidazole as co-catalyst. The epoxide yields clearly demonstrate the influence of steric and electronic properties of olefins, the catalysts and nitrogenous bases as axial ligand. [Mn(phox)₂(CH₃OH)₂]ClO₄ catalyst with low steric properties has higher catalytic activity than Mn(phox)₃. The highest epoxide yield (95%) was achieved for indene at the presence of [Mn(phox)₂(CH₃OH)₂]ClO₄ within 5 min. The proximal and distal interactions of strong π-donor axial ligands such as imidazole with the active intermediate are efficiently increased activity of the catalytic system.     

Simple one‐pot conversion of organic compounds by hydrogen peroxide activated by ruthenium(III) chloride: organic conversions by hydrogen peroxide in the presence of ruthenium(III)

The aromatic compounds p‐nitrobenzaldehyde, p‐hydroxybenzaldehyde, naphthalene, toluene, catechol, quinol, aniline and toluidine dissolved in aqueous acetic acid or aqueous medium were oxidized in quantitative to good yields by 50% H₂O₂ in the presence of traces of RuCl₃ (～10^?8 mol; substrate/catalyst ratio 1488:1 to 341 250:1). Conditions for highest yields, in the most economical way, were obtained. Higher catalyst concentrations decrease the yield. Oxidation in aromatic aldehydes is selective at the aldehydic group only. In the case of hydrocarbons, oxidation results in the introduction of a hydroxyl group with >85% (in the case of toluene) selectivity for the ortho position. Formation of low‐molecular‐weight polyaniline was reduced to 10%, along with 90% formation of higher molecular weight polyaniline. In this new, simple and economical method, which is environmentally safe and requires less time, oxo‐centered carboxylate species of ruthenium(III) in acetic acid medium and hydrated ruthenium(III) chloride in aqueous medium probably catalyze the oxidation. Copyright © 2005 John Wiley & Sons, Ltd.     

Flow-injection determination of hydrogen peroxide based on fluorescence quenching of chromotropic acid catalyzed with Fe(II)

Flow-injection analysis system (FIA system), which was based on Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide, was developed for the determination of hydrogen peroxide. The chromotropic acid has a fluorescence measured at λ_em = 440 nm (emission wavelength) with λ_ex = 235 nm (excitation wavelength), and the fluorescence intensity at λ_em = 440 nm quietly decreased in the presence of hydrogen peroxide and Fe(II), which was caused by Fe(II)-catalyzed oxidation of chromotropic acid with hydrogen peroxide. By measuring the difference of fluorescence intensity, hydrogen peroxide (1.0 × 10⁻⁸-1.0 × 10⁻³ mol L⁻¹) could be determined by the proposed FIA system, whose analytical throughput was 40 samples h⁻¹. The relative standard deviation (RSD) was 1.03% (n = 10) for 4.0 × 10⁻⁸ mol L⁻¹ hydrogen peroxide. The proposed FIA technique could be applied to the determination of hydrogen peroxide in rain water samples.     

Spectrofluorimetric determination of hydrogen peroxide based on the catalytic effect of peroxidase-like manganese tetrakis(sulphophenyl) porphyrin on the oxidation of homovanillic acid

Traces of hydrogen peroxide (8.5 × 10^?8–2.5 × 10^?6 mol/l) and, indirectly, glucose (3–44 × 10^?6 mol/l) can be determined by the fluorescence reaction between homovanillic acid and hydrogen peroxide. Mn-TPPS₄ is found to have very similar catalytic properties to horse peroxidase.