Binding of sodium dodecyl sulfate and hexaethylene glycol mono-n-dodecyl ether to the block copolymer L64: electromotive force, microcalorimetry, surface tension, and small angle neutron scattering investigations of mixed micelles and polymer/micellar surfactant complexes

The interactions of sodium dodecyl sulfate (SDS) with the triblock copolymer L64 (EO13-PO30-EO13) and hexaethylene glycol mono-n-dodecyl ether (C12EO6) were studied using electromotive force, isothermal titration microcalorimetry, differential scanning microcalorimetry, and surface tension measurements. In certain regions of binding, mixed micelles are formed, and here we could evaluate an interaction parameter using regular solution theory. The mixed micelles of L64 with both SDS and C12EO6 exhibit synergy. When L64 is present in its nonassociated state, it forms polymer/micellar SDS complexes at SDS concentrations above the critical aggregation concentration (cac). The cac is well below the critical micellar concentration (cmc) of pure SDS, and a model suggesting how bound micelles are formed at the cac in the presence of a polymer is described. The interaction of nonassociated L64 with C12EO6 is a very rare example of strong binding between a nonionic surfactant and a nonionic polymer, and C12EO6/L64 mixed micelles are formed. We also carried out small angle neutron scattering measurement to determine the structure of the monomeric polymer/micellar SDS complex, as well as the mixed L64/C12EO6 aggregates. In these experiments, contrast matching was achieved by using the h and d forms of SDS, as well as C12EO6. During the early stages of the formation of polymer-bound SDS micelles, SDS aggregates with aggregation numbers of approximately 20 were found and such complexes contain 4-6 bound L64 monomers. The L64/C12EO6 data confirmed the existence of mixed micelles, and structural information involving the composition of the mixed micelle and the aggregation numbers were evaluated.     

Structural organization of cetyltrimethylammonium sulfate in aqueous solution: The effect of Na2SO4

We used dynamic light scattering (DLS), steady-state fluorescence, time resolved fluorescence quenching (TRFQ), tensiometry, conductimetry, and isothermal titration calorimetry (ITC) to investigate the self-assembly of the cationic surfactant cetyltrimethylammonium sulfate (CTAS) in aqueous solution, which has SO(2-)4 as divalent counterion. We obtained the critical micelle concentration (cmc), aggregation number (N(agg)), area per monomer (a0), hydrodynamic radius (R(H)), and degree of counterion dissociation (alpha) of CTAS micelles in the absence and presence of up to 1 M Na2SO4 and at temperatures of 25 and 40 degrees C. Between 0.01 and 0.3 M salt the hydrodynamic radius of CTAS micelle R(H) approximately 16 A is roughly independent on Na2SO4 concentration; below and above this concentration range R(H) increases steeply with the salt concentration, indicating micelle structure transition, from spherical to rod-like structures. R(H) increases only slightly as temperature increases from 25 to 40 degrees C, and the cmc decreases initially very steeply with Na2SO4 concentration up to about 10 mM, and thereafter it is constant. The area per surfactant at the water/air interface, a0, initially increases steeply with Na2SO4 concentration, and then decreases above ca. 10 mM. Conductimetry gives alpha = 0.18 for the degree of counterion dissociation, and N(agg) obtained by fluorescence methods increases with surfactant concentration but it is roughly independent of up to 80 mM salt. The ITC data yield cmc of 0.22 mM in water, and the calculated enthalpy change of micelle formation, Delta H(mic) = 3.8 kJ mol(-1), Gibbs free energy of micellization of surfactant molecules, Delta G(mic) = -38.0 kJ mol(-1) and entropy TDelta S(mic) = 41.7 kJ mol(-1) indicate that the formation of CTAS micelles is entropy-driven.     

Stabilizing bolaform amphiphile interfacial assemblies by introducing mesogenic groups

We describe the synthesis and characterization of the mesogen-bearing bolaform amphiphile 4,4'-dihydroxybiphenylbis(11-pyridinium-N-yl-undecanoic ester) dibromide (BP-10) and its solid/liquid interfacial self-assembly. Cylindrical micelles are directly observed by atomic force microscopy (AFM) at the interface between mica and the aqueous solution above the critical micelle concentration (cmc). In situ and ex situ AFM studies indicate that the cylindrical micelles are stable both at the mica/solution interface and in the dry state. The enhanced stability of the micellar structures enables a detailed investigation of their self-assembly behavior and supramolecular structures at the interface. The adsorption model proposed here is supported by the variation of the interfacial self-assemblies on changing the solution concentration and substrate temperature.     

Surface and micellar properties of new nonionic gemini aldonamide-type surfactants

A new group of gemini aldonamide-type surfactants-N,N'-bisalkyl-N,N'-bis[(3-gluconylamide)propyl]ethylenediamines, N,N'-bisdodecyl-N,N'-bis[(3-glucoheptonylamide)propyl]ethylenediamine, and N,N'-bisalkyl-N,N'-bis[(3-lactobionylamide)propyl]ethylenediamines, (alkyl: n-C(8)H(17), n-C(12)H(25)), were synthesized and characterized. The surface properties, such as surface excess concentration, Gamma(cmc), surface area demand per molecule, A(min), efficiency in surface tension reduction, pC(20), the effectiveness of surface tension reduction, gamma(cmc), critical micelle concentration, cmc, and a measure of the tendency of the surfactant to adsorb at the aqueous/air interface relative to its tendency to form micelles in the bulk surfactant solution, cmc/C(20), and standard free energy of micellization, DeltaG(mic)(0), have been obtained by means of surface tension measurements. The standard fluorescence shift technique using PRODAN as a probe provide confirmation of the cmc values by an alternative method. Additionally, the micellar properties for the concentration near above the cmc have been characterized by the aggregation number, N(agg). The presence of the dimeric segments with the aldonamide hydrophilic units in the surfactant molecule is found to be the source of their unusual physicochemical behavior. They are very efficient at adsorbing at the free surface and at forming micelles in water. Their critical micelle concentration values are remarkably low. They reveal remarkably low A(min) values in relation to conventional nonionic surfactants, which is unexpected from the molecular dimensions for the molecule but which is possible if one assumes some type of multilayer structure or a coherent interfacial film.     

Surface and bulk properties of aqueous decyltrimethylammonium bromide-hexadecyltrimethylammonium bromide mixed system

The aqueous mixed system decyltrimethylammonium bromide (C(10)TAB)-hexadecyltrimethylammonium bromide (C(16)TAB) was studied by conductivity, ion-selective electrodes, surface tension, and fluorescence spectroscopy techniques. The mixture critical micelle concentration, cmc(*), aggregation number, N( *), and micelle molar conductivity, Lambda(M)(cmc), showed that the system aggregation is strongly nonideal. Both cmc(*) and N( *) results were analyzed with two different procedures: (i) the regular solution theory on mixed micelles or Rubingh's theory, and (ii) by the determination of the partial critical micelle concentration of the amphiphile component i in the presence of a constant concentration of the other amphiphile component, cmc(i)( *). The Rubingh procedure gives micelles richer in C(16)TAB than the overall mixtures, while procedure (ii) gives micelles having the same composition as in the complete surfactant mixture (alpha(C(10)TAB). Mixed micelles are larger than pure surfactant ones, with nonspherical shape. Using a literature model, the cause of the synergistic effect seems to be a reduction of the hydrocarbon/water contact at the micelle surface when mixed micelles form. Conductivity and ion-selective electrodes indicate that highly ionized premicelles form immediately before the cmc(*). The air/solution interface is strongly nonideal and much richer in C(16)TAB than the composition in the bulk. When micelles form there is a strong desorption from the air/solution interface because micelles are energetically favored when compared with the monolayer.     

二元Pluronic嵌段共聚物相互作用

用I2探针增溶分光光度法考察二元Pluronic两亲嵌段共聚物在水溶液中的胶束化行为,实验结果表明,对于分子PPO嵌段长度相近的P94/L92和F108/L92二元混合体系,这些分子在全部浓度比例范围内都发生相互作用,生成了混合胶束,由于这些分子的PEO嵌段长度不等,随着具有较短PEO嵌段的L92分子加入,P94/L92和F108/L92混合胶束外壳的EO基团数减少导致水化度降低。对于分子PPO嵌段长度不等的P94/L64二元混合体系,当溶液体当中L64的质量分数wL64<0.4时,由于P94/L64混合预胶束的形成,使P94分子在较高浓度时才生成单组分胶束,当wL64>0.4后,溶液中生成了P94/L64混合胶束,温度升高促进了胶束化行为。     

Structural effects on surface and micellar properties of alkanediyl-alpha, omega-bis(sodium N-acyl-beta-alaninate) gemini surfactants

A study of the equilibrium surface properties (in water and in the presence of 0.01 M NaCl) of a novel series of anionic gemini surfactants, alkanediyl-alpha,omega-bis(sodium N-acyl-beta-alaninates), is described. Parameters studied include cmc (critical micelle concentration), C20 (required to reduce the surface tension of the solvent by 20 mN/m), gamma(cmc) (the surface tension at the cmc), Gamma(max) (the maximum surface excess concentration at the air/aqueous solution interface), Amin (the minimum area per surfactant molecule at the air/water interface), and the cmc/C20 ratio (a measure of the tendency to form micelles relative to adsorb at the air/water interface). The geminis with a spacer consisting of two methylene groups show premicellar self-aggregation, both in water and in 0.01 M NaCl, when the N-acyl group contains more than 12 carbon atoms; geminis with a spacer consisting of four methylene groups show no premicellar aggregation even when the N-acyl group contains 16 carbon atoms. For the acyl chain lengths where premicellar aggregation does not occur, the values of the cmc of the geminis with a two-methylene spacer are lower than those for the corresponding analogous geminis with a four-methylene spacer. The premicellar formation for the geminis with a two-methylene spacer is due to the short-chain linkage. The geminis show little or no break in their specific conductance-surfactant molar concentration plots and an increase in the pH at the cmc. This is attributed to protonation of the carboxylate group and strong Na+ release during micellization.     

Effect of NaCl on the self-aggregation of n-octyl beta-D-thioglucopyranoside in aqueous medium

This report investigates the effect of sodium chloride (NaCl) on the micellization, surface activity, and the evolution in the shape and size of n-octyl beta-D-thioglucopyranoside (OTG) aggregates. By using surface tension measurements, information was obtained on both changes in the critical micelle concentration and adsorption behavior in the air-liquid interface with the electrolyte concentration. These data were used to obtain the thermodynamic properties of micellization along with the corresponding adsorption parameters in the air-liquid interface. From extended static and dynamic light scattering measurements, the micelle molecular weight, the mean aggregation number, and the second virial coefficient, the apparent diffusion coefficient and the mean hydrodynamic radius of micelles in a range of NaCl concentrations were obtained. The light scattering data have shown that when the surfactant concentration is lower to 4.5 g/L, only spherical micelles are formed. However, an increase in the surfactant concentration induces an increase in micellar size, suggesting a rodlike growth of the micelles. This deviation of micelle geometry from spherical to rodlike is supported both by the ratio between the hydrodynamic radius and the radius of gyration and by the angular dependence of light scattering. On the other hand, the studies performed in the presence of high NaCl concentration (0.2 and 0.5 M) provide strong support for the view that the micelles may overlap together to form an entangled network above certain crossover concentration.     

pH-responsive diblock copolymer micelles at the silica/aqueous solution interface: Adsorption kinetics and equilibrium studies

The adsorption behavior of two examples of a weakly basic diblock copolymer, poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate) (PDMA-PDEA), at the silica/aqueous solution interface has been investigated using a quartz crystal microbalance with dissipation monitoring and an optical reflectometer. Dynamic and static light scattering measurements have also been carried out to assess aqueous solution properties of such pH-responsive copolymers. In alkaline solution, core-shell micelles are formed above the critical micelle concentration (cmc) by both copolymers, whereas the chains are molecularly dissolved (as unimers) at all concentrations in acidic solution. As a result, the adsorption behavior of PDMA-PDEA diblock copolymers on silica is strongly dependent on both the copolymer concentration and the solution pH. Below the cmc at pH 9, the cationic PDMA-PDEA copolymers adsorb as unimers and the conformation of the adsorbed polymer is essentially flat. At concentrations just above the cmc, the initial adsorption of copolymer onto the silica is dominated by the unimers due to their faster diffusion compared to the much larger micelles. Rearrangement of the adsorbed unimers and/or their subsequent displacement by micelles from solution is then observed during an equilibration period, and the final adsorbed mass is greater than that observed below the cmc. At concentrations well above the cmc, the much higher proportion of micelles in solution facilitates more effective competition for the surface at all stages of the adsorption process and no replacement of initially adsorbed unimers by micelles is evident. However, the adsorbed layer undergoes gradual rearrangement after initial adsorption. This relaxation is believed to result from a combination of further copolymer adsorption and swelling of the adsorbed layer.     

A calorimetry and light scattering study of the formation and shape transition of mixed micelles of EO20PO68EO20 triblock copolymer (P123) and nonionic surfactant (C12EO6)

The interaction between the nonionic surfactant C12EO6 and the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer EO20PO68EO20 (P123) has been investigated by means of isothermal titration and differential scanning calorimetry (DSC) as well as static and dynamic light scattering (SLS and DLS). P123 self-assembles in water into spherical micelles at ambient temperatures. At raised temperatures, the DSC data revealed a sphere-to-rod transition of the P123 micelles around 60 degrees C. C12EO6 interacts strongly with P123 micelles in aqueous solution to give mixed micelles with a critical micelle concentration (cmc) well below the cmc for pure C12EO6. The presence of C12EO6 also lowers the critical micelle temperature of P123 so aggregation starts at significantly lower temperatures. A new phenomenon was observed in the P123-C12EO6 system, namely, a well-defined sphere-to-rod transition of the mixed micelles. A visual phase study of mixtures containing 1.00 wt % P123 showed that in a narrow concentration range of C12EO6 both the sphere-to-rod transition and the liquid-liquid phase separation temperature are strongly depressed compared to the pure P123-water system. The hydrodynamic radius of spherical mixed micelles at a C12EO6/P123 molar ratio of 2.2 was estimated from DLS to be 9.1 nm, whereas it is 24.1 nm for the rodlike micelles. Furthermore, the hydrodynamic length of the rods at a molar ratio of 2.2 is in the range of 100 nm. The retarded kinetics of the shape transition was detected in titration calorimetric experiments at 40 degrees C and further studied by using time-resolved DLS and SLS. The rate of growth, which was slow (>2000 s), was found to increase with the total concentration.     

Synthesis and surface properties of anionic gemini surfactants with amide groups

Novel anionic gemini surfactants, 1,2-bis(N-beta-carboxypropanoyl-N-alkylamino)ethane (2CnenAm; n is hydrocarbon chain length of 6, 8, 10, 12, or 14), with two hydrocarbon chains, two carboxylate groups, and two amide groups, were synthesized by three-step reactions. Their solution properties were characterized by equilibrium and dynamic surface tension, steady-state fluorescence spectroscopy of pyrene, and dynamic light-scattering techniques. The surface tension measurements of 2CnenAm give low critical micelle concentrations (cmc), great efficiency in lowering the surface tension, and strong adsorption at air/water interface. Gemini surfactants behave normally with the logarithm of cmc decrease linearly with the chain length. In addition, adsorption and micellization behavior of 2CnenAm was estimated by parameter of pC20, cmc/C20, and standard free energy (DeltaG(0)mic and DeltaG(0)ads); they are significantly influenced by hydrocarbon chain length, and the adsorption is promoted more than the micellization as chain length becomes longer. The results of dynamic light-scattering and fluorescence quenching indicate that small micelles of 2CnenAm are observed at the concentrations above the cmc, and further large particles are also seen. Further, from the dynamic surface tension measurements, it is found that the shorter hydrocarbon chain length of 2CnenAm, the faster the rate of decrease of surface tension.     

Mixed micellization between natural and synthetic block copolymers: β-casein and Lutrol F-127

Amphiphilic block copolymers and mixtures of amphiphiles find broad applications in numerous technologies, including pharma, food, cosmetic and detergency. Here we report on the interactions between a biological charged diblock copolymer, β-casein, and a synthetic uncharged triblock copolymer, Lutrol F-127 (EO(101)PO(56)EO(101)), on their mixed micellization characteristics and the micelles' structure and morphology. Isothermal titration calorimetry (ITC) experiments indicate that mixed micelles form when Lutrol is added to monomeric as well as to assembled β-casein. The main driving force for the mixed micellization is the hydrophobic interactions. Above β-casein CMC, strong perturbations caused by penetration of the hydrophobic oxypropylene sections of Lutrol into the protein micellar core lead to disintegration of the micelles and reformation of mixed Lutrol/β-casein micelles. The negative enthalpy of micelle formation (ΔH) and cooperativity increase with raising β-casein concentration in solution. ζ-potential measurements show that Lutrol interacts with the protein micelles to form mixed micelles even below its critical micellization temperature (CMT). They further indicate that Lutrol effectively masks the protein charges, probably by forming a coating layer of the ethyleneoxide rich chains. Small-angle X-ray scattering (SAXS) and cryogenic-transmission electron microscopy (cryo-TEM) indicate relatively small changes in the oblate micellar shape, but do show swelling along the small axis of β-casein micelles in the presence of Lutrol, thereby confirming the formation of mixed micelles.     

Dimeric and oligomeric surfactants. Behavior at interfaces and in aqueous solution: a review

Dimeric and oligomeric surfactants are novel surfactants that are presently attracting considerable interest in the academic and industrial communities working on surfactants. This paper first presents a number of chemical structures that have been reported for ionic, amphoteric and nonionic dimeric and oligomeric surfactants. The following aspects of these surfactants are then successively reviewed the state of dimeric and oligomeric surfactants in aqueous solutions at concentration below the critical micellization concentration (cmc); their behavior at the air/solution and solid/solution interfaces; their solubility in water, cmc and thermodynamics of micellization; the properties of the aqueous micelles of dimeric and oligomeric surfactants (ionization degree, size, shape, micropolarity and microviscosity, solution microstructure, solution rheology, micelle dynamics, micellar solubilization, interaction between dimeric surfactants and water-soluble polymers); the mixed micellization of dimeric surfactants with various conventional surfactants; the phase behavior of dimeric surfactants and the applications of these novel surfactants.     

Effect of acid on the aggregation of poly(ethylene xide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers

The acid effect on the aggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers EO(20)PO(70)EO(20) has been investigated by transmission electron microscopy (TEM), particle size analyzer (PSA), Fourier transformed infrared, and fluorescence spectroscopy. The critical micellization temperature for Pluronic P123 in different HCl aqueous solutions increases with the increase of acid concentration. Additionally, the hydrolysis degradation of PEO blocks is observed in strong acid concentrations at higher temperatures. When the acid concentration is low, TEM and PSA show the increase of the micelle mean diameter and the decrease of the micelle polydispersity at room temperature, which demonstrate the extension of EO corona and tendency of uniform micelle size because of the charge repulsion. When under strong acid conditions, the aggregation of micelles through the protonated water bridges was observed.     

新型Gemini咪唑表面活性剂的合成及表面性能

以2,2-双(溴甲基)-1,3-丙二醇为连接基合成了新型的连接基为枝状的Gemini咪唑表面活性剂2,4-二(溴化-3-烷基咪唑)-1,3-丙二醇([Cn-P-Cnim]Br2,n=10,12,14).产物经核磁共振氢谱(1H NMR)、红外(IR)光谱和元素分析等进行了分析,证明所得产物即为目标产物.通过表面张力法和电导法测量其表面活性并计算胶束形成热力学参数(ΔG m—0,ΔH m—0,ΔS m—0).结果表明,25℃时3种表面活性剂均具有很高的表面活性,胶束的形成是自发的熵驱动过程.     

CHARACTERIZATION OF THE SUB-MICELLAR SPECIES IN MIXED SURFACTANT SOLUTIONS I: MIXTURES OF SODIUM LAURYL SULFATE AND AN ALKYL POLYETHOXY SULFATE

The formation of micelles and the composition and concentration of sub-micellar components of surfactant solutions was studied for sodium lauryl sulfate (SLS), alkyl polyethoxy (average of 7 EO) sulfate (AEOS 7EO) and mixtures of these two anionic surfactants both above and below the critical micelle concentrations (c.m.c). Radiolabeled surfactant was added to the solutions to follow the concentration and identity of the components. To separate micelles from sub-micellar components, an Amicon microfiltration apparatus containing either a 2, 5, or 30 thousand molecular weight cut off membrane was used. Results using a hydrophobic fluorescent probe demonstrated minimal disruption of the micelles during separation. Separations for single surfactants showed breaks in the concentration curves at the c.m.c. The observed sub-micellar composition and concentration were evidence of non-ideal behavior. Concentration dependence and surfactant selectivity in micellization (the “micro c.m.c.”phenomena) is described. This previously undocumented behavior reveals that the compositions of micelles and the sub-micellar phase for mixed surfactant systems do not reflect the composition of the original solution mixture.     

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: a conductometric study

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

New thermodynamic/electrostatic models of adsorption and tension equilibria of aqueous ionic surfactant mixtures: application to sodium dodecyl sulfate/sodium dodecyl sulfonate systems

The nonideal adsorbed solution (NAS) theory has been formally extended to adsorption at the air/water interface from aqueous mixtures of ionic surfactants, explicitly accounting for the surface potential of the adsorbed monolayer with the Gouy-Chapman theory. This new ionic NAS (iNAS) theory is thermodynamically consistent and, when coupled to a micellization model, is valid for concentrations below and above the mixed cmc. Counterion binding is incorporated into the model using two fractional binding parameters, beta(sigma) for the adsorbed monolayer and beta(m) for the micelles. The regular solution theory is used to model the nonideal interactions within the adsorbed monolayer and within the mixed micelles. New tension data for an equimolar mixture of sodium dodecyl sulfate (SDS) and sodium dodecyl sulfonate (SDSn) at two salinities fit this model well when mixing is ideal. The total surface densities, the surface compositions, and the surface potentials for the mixed monolayers are calculated. When there is no added salt, at total surfactant concentrations below the mixed cmc, the adsorbed monolayer is enriched in SDSn, but at total concentrations at and above the mixed cmc, the adsorbed monolayer is nearly an equimolar mixture. In the presence of 100 mM NaCl, the adsorbed monolayer is nearly an equimolar mixture, independent of the total surfactant concentration.