Synthetic Approaches to (smif)(2)Ti (smif = 1,3-di-(2-pyridyl)-2-azaallyl) Reveal Redox Non-Innocence and C-C Bond-Formation

Attempted syntheses of (smif)(2)Ti (smif =1,3-di-(2-pyridyl)-2-azaallyl) based on metatheses of TiCl(n)L(m) (n = 2-4) with M(smif) (M = Li, Na), in the presence of a reducing agent (Na/Hg) when necessary, failed, but several apparent Ti(II) species were identified by X-ray crystallography and multidimensional NMR spectroscopy: (smif){Li(smif-smif)}Ti (1, X-ray), [(smif)Ti](2)(μ-κ(3),κ(3)-N,N(py)(2)-smif,smif) (2), (smif)Ti(κ(3)-N,N(py)(2)-smif,(smif)H) (3), and (smif)Ti(dpma) (4, dpma = di-2-pyridylmethyl-amide). NMR spectroscopy and K-edge XAS showed that each compound possesses ligands that are redox noninnnocent, such that d(1) Ti(III) centers AF-couple to ligand radicals: (smif){Li(smif-smif)(2-)}Ti(III) (1), [(smif(2-))Ti(III)](2)(μ-κ(3),κ(3)-N,N(py)(2)-smif,smif) (2), [(smif(2-))Ti(III)](κ(3)-N,N(py)(2)-smif,(smif)H) (3), and (smif(2-))Ti(III)(dpma) (4). The instability of (smif)(2)Ti relative to its C-C coupled dimer, 2, is rationalized via the complementary nature of the amide and smif radical dianion ligands, which are also common to 3 and 4. Calculations support this contention.     

Synthesis and characterization of quasi-two-coordinate transition metal dithiolates M(SAr*)2 (M = Cr, Mn, Fe, Co, Ni, Zn; Ar* = C6H3-2,6(C6H2-2,4,6-Pri3)2

A sequence of first row transition metal(II) dithiolates M(SAr)(2) (M = Cr(1), Mn(2), Fe(3), Co(4), Ni(5) and Zn(6); Ar = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-Pr(i)(3))(2)) has been synthesized and characterized. Compounds 1-5 were obtained by the reaction of two equiv of LiSAr with a metal dihalide, whereas 6 was obtained by treatment of ZnMe(2) with 2 equiv of HSAr. They were characterized by spectroscopy, magnetic measurements, and X-ray crystallography. The dithiolates 1, 2, and 4-6 possess linear or nearly linear SMS units with further interactions between M and two ipso carbons from C(6)H(2)-2,4,6-Pr(i)(3) rings. The iron species 3, however, has a bent geometry, two different Fe-S distances, and an interaction between iron and one ipso carbon of a flanking ring. The secondary M-C interactions vary in strength in the sequence Cr(2+) approximately Fe(2+) > Co(2+) approximately Ni(2+) > Mn(2+) approximately Zn(2+) such that the manganese and zinc compounds have essentially two coordination but the chromium and iron complexes are quasi four and three coordinate, respectively. The geometric distortions in the iron species 3 suggested that the structure represents the initial stage of a rearrangement into a sandwich structure involving metal-aryl ring coordination. The bent structure of 3 probably also precludes the observation of free ion magnetism of Fe(2+) recently reported for Fe{C(SiMe(3))(3)}(2). DFT calculations on the model compounds M(SPh)(2) (M = Cr-Ni) support the higher tendency of the iron species to distort its geometry.     

Aggregation of [(tBu3SiS)MX]: structures of {[Br2Fe(mu-SSitBu3)2)FeBr(THF)]Na(THF)4}infinity, cis-[(THF)FeI]2(mu-SSitBu3)2, [(tBu3SiS)Fe]2(mu-SSitBu3)2, and comparative structure and magnetism studies of [(tBu3SiS)MX]n (M = Fe, Co, X = Cl, n = 12; M = Fe, Ni, X = Br, n = 12; M = Fe, X = I, n = 14)

A convenient synthesis of (t)Bu(3)SiSH and (t)Bu(3)SiSNa(THF)(x)() led to the exploration of "(t)Bu(3)SiSMX" aggregation. The dimer, [((t)Bu(3)SiS)Fe](2)(mu-SSi(t)Bu(3))(2) (1(2)), was formed from [{(Me(3)Si)(2)N}Fe](2)(mu-N(SiMe(3))(2))(2) and the thiol, and its dissolution in THF generated ((t)Bu(3)SiS)(2)Fe(THF)(2) (1-(THF)(2)). Metathetical procedures with the thiolate yielded aggregate precursors [X(2)Fe](mu-SSi(t)Bu(3))(2)[FeX(THF)]Na(THF)(4) (3-X, X = Cl, Br) and cis-[(THF)IFe](2)(mu-SSi(t)Bu(3))(2) (4). Thermal desolvations of 3-Cl, 3-Br and 4 afforded molecular wheels [Fe(mu-X)(mu-SSi(t)Bu(3))](12)(C(6)H(6))(n) (5-FeX, X = Cl, Br) and the ellipse [Fe(mu-I)(mu-SSi(t)Bu(3))](14)(C(6)H(6))(n) (6-FeI). Related metathesis and desolvation sequences led to wheels [Co(mu-Cl)(mu-SSi(t)Bu(3))](12)(C(6)H(6))(n) (5-CoCl) and [Ni(mu-Br)(mu-SSi(t)Bu(3))](12)(C(6)H(6))(n) (5-NiBr). The nickel wheel disproportionated to give, in part, [((t)Bu(3)SiS)Ni](2)(mu-SSi(t)Bu(3))(2) (7), which was also synthesized via salt metathesis. X-ray structural studies of 1(2) revealed a roughly planar Fe(2)S(4) core, while 1-(THF)(2), 3-Br, and 4 possessed simple distorted tetrahedral and edge-shared tetrahedral structures. X-ray structural studies revealed 5-MX (MX = FeCl, FeBr, CoCl, NiBr) to be wheels based on edge-shared tetrahedra, but while the pseudo-D(6)(d) wheels of 5-FeCl, 5-CoCl, and 5-FeBr pack in a body-centered arrangement, those of pseudo-C(6)(v)() 5-NiBr exhibit hexagonal packing and two distinct trans-annular d(Br...Br). Variable-temperature magnetic susceptibility measurements were conducted on 5-FeCl, 5-CoCl, 5-FeBr, and 6-FeI, and the latter three are best construed as weakly antiferromagnetic, while 5-FeCl exhibited modest ferromagnetic coupling. Features suggesting molecular magnetism are most likely affiliated with phase changes at low temperatures.     

Synthesis and reactions of group 6 metal half-sandwich complexes of 2,2-dicyanoethylene-1,1-dichalcogenolates [(Cp*)M[E(2)C=C(CN)(2)](2)]-(M = Mo,W; E = S,Se)

A series of group 6 transition metal half-sandwich complexes with 1,1-dichalcogenide ligands have been prepared by the reactions of Cp*MCl(4)(Cp* = eta(5)-C(5)Me(5); M = Mo, W) with the potassium salt of 2,2-dicyanoethylene-1,1-dithiolate, (KS)(2)C=C(CN)(2) (K(2)-i-mnt), or the analogous seleno compound, (KSe)(2)C=C(CN)(2) (K(2)-i-mns). The reaction of Cp*MCl(4) with (KS)(2)C=C(CN)(2) in a 1:3 molar ratio in CH(3)CN gave rise to K[Cp*M(S(2)C=C(CN)(2))(2)] (M = Mo, 1a, 74%; M = W, 2a, 46%). Under the same conditions, the reaction of Cp*MoCl(4) with 3 equiv of (KSe)(2)C=C(CN)(2) afforded K[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3a) and K[Cp*Mo(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))] (4) in respective yields of 45% and 25%. Cation exchange reactions of 1a, 2a, and 3a with Et(4)NBr resulted in isolation of (Et(4)N)[Cp*Mo(S(2)C=C(CN)(2))(2)] (1b), (Et(4)N)[Cp*W(S(2)C=C(CN)(2))(2)] (2b), and (Et(4)N)[Cp*Mo(Se(2)C=C(CN)(2))(2)] (3b), respectively. Complex 4 crystallized with one THF and one CH(3)CN molecule as a three-dimensional network structure. Inspection of the reaction of Cp*WCl(4) with (KSe)(2)C=C(CN)(2) by ESI-MS revealed the existence of three species in CH(3)CN, [Cp*W(Se(2)C=C(CN)(2))(2)]-, [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-, and [Cp*W(Se(Se(2))C=C(CN)(2))(2)]-, of which [Cp*W(Se(2)C=C(CN)(2))(Se(Se(2))C=C(CN)(2))]-(5) was isolated as the main product. Treatment of 2a with 1/4 equiv of S(8) in refluxing THF resulted in sulfur insertion and gave rise to K[Cp*W(S(2)C=C(CN)(2))(S(S(2))C=C(CN)(2))](6), which crystallized with two THF molecules forming a three-dimensional network structure. 6 can also be prepared by refluxing 2a with 1/4 equiv of S(8) in THF. 3a readily added one Se atom upon treatment with 1 mol of Se powder in THF to give 4 in high yield, while the treatment of 3a or 4 with 2 equiv of Na(2)Se in THF led to formation of a dinuclear complex [(Cp*Mo)(2)(mu-Se)(mu-Se(Se(3))C=C(CN)(2))] (7). The structure of 7 consists of two Cp*Mo units bridged by a Se(2-) and a [Se(Se(3))C=C(CN)(2)](2-) ligand in which the triselenido group is arranged in a nearly linear way (163 degrees). The reaction of 2a with 2 equiv of CuBr in CH(3)CN yielded a trinuclear complex [Cp*WCu(2)(mu-Br)(mu(3)-S(2)C=C(CN)(2))(2)] (8), which crystallized with one CH(3)CN and generated a one-dimensional chain polymer through bonding of Cu to the N of the cyano groups.     

Synthesis,characterization, and solution redox properties of (trimpsi)M(CO)(2)(NO) complexes [M = V,Nb, Ta; trimpsi = (t)BuSi(CH(2)PMe(2))(3)

Treatment of [Et(4)N][M(CO)(6)] (M = Nb, Ta) with I(2) in DME at -78 degrees C produces solutions of the bimetallic anions [M(2micro-I)(3)(CO)(8)](-). Addition of the tripodal phosphine (t)BuSi(CH(2)PMe(2))(3) (trimpsi) followed by refluxing affords (trimpsi)M(CO)(3)I [M = Nb (1), Ta (2)], which are isolable in good yields as air-stable, orange-red microcrystalline solids. Reduction of these complexes with 2 equiv of Na/Hg, followed by treatment with Diazald in THF, results in the formation of (trimpsi)M(CO)(2)(NO) [M = Nb (3), Ta (4)] in high isolated yields. The congeneric vanadium complex, (trimpsi)V(CO)(2)(NO) (5), can be prepared by reacting [Et(4)N][V(CO)(6)] with [NO][BF(4)] in CH(2)Cl(2) to form V(CO)(5)(NO). These solutions are treated with 1 equiv of trimpsi to obtain (eta(2)-trimpsi)V(CO)(3)(NO). Refluxing orange THF solutions of this material affords 5 in moderate yields. Reaction of (trimpsi)VCl(3)(THF) (6) with 4 equiv of sodium naphthalenide in THF in the presence of excess CO provides [Et(4)N][(trimpsi)V(CO)(3)] (7), (trimpsi)V(CO)(3)H, and [(trimpsi)V(micro-Cl)(3)V(trimpsi)][(eta(2)-trimpsi)V(CO)(4)].3THF ([8][9].3THF). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2.(1)/(2)THF, 3-5, and [8][9].3THF have been established by X-ray diffraction analyses. The solution redox properties of 3-5 have also been investigated by cyclic voltammetry. Cyclic voltammograms of 3 and 4 both exhibit an irreversible oxidation feature in CH(2)Cl(2) (E(p,a) = -0.71 V at 0.5 V/s for 3, while E(p,a) = -0.55 V at 0.5 V/s for 4), while cyclic voltammograms of 5 in CH(2)Cl(2) show a reversible oxidation feature (E(1/2) = -0.74 V) followed by an irreversible feature (0.61 V at 0.5 V/s). The reversible feature corresponds to the formation of the 17e cation [(trimpsi)V(CO)(2)(NO)](+) ([5](+)()), and the irreversible feature likely involves the oxidation of [5](+)() to an unstable 16e dication. Treatment of 5 with [Cp(2)Fe][BF(4)] in CH(2)Cl(2) generates [5][BF(4)], which slowly decomposes once formed. Nevertheless, [5][BF(4)] has been characterized by IR and ESR spectroscopies.     

Low-coordinate chromium siloxides: the "box" [Cr(mu-Cl)(mu-OSitBu3)]4, distorted trigonal [(tBu3SiO)3Cr][Na(benzene)] and [(tBu3SiO)3Cr][Na(dibenzo-18-c-6)], and trigonal (tBu3SiO)3Cr

Treatment of CrCl(2)(THF)(2) with NaOSi(t)Bu(3) afforded the tetrameric "box" [Cr(mu-Cl)(mu-OSi(t)Bu(3))](4) (1, X-ray). THF cleaved 1 to provide trans-(silox)ClCr(THF)(2) (2), whereas degradation of 1 with 4-picoline caused disproportionation and the generation of trans-Cl(2)Cr(4-pic)(2) and trans-(silox)(2)Cr(4-pic)(x) (n = 2, 3; 3, 3-4-pic). Chromous centers in 1 were antiferromagnetically coupled, and density functional calculations on the high-spin (multiplicity = 17) model [Cr(mu-Cl)(mu-OH)](4) (1') revealed that its singly occupied 3d orbitals spanned an energy range of approximately 2 eV. The addition of 8 equiv of Na(silox) to 1 yielded [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na.C(6)H(6) (4, Y shaped, angle OCrO(Na) = 91.28(7) degrees), and treatment of 4 with dibenzo-18-crown-6 produced [(silox)(3)Cr][Na(dibenzo-18-crown-6)] (5, angle OCrO = approximately 120 degrees, (120 + alpha) degrees, (120 - alpha) degrees). Calculations of [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na (4') and Cr(silox)(3)(-) (5') provided reasonable matches with the experimental geometries (X-ray). The trigonal chromic derivative (silox)(3)Cr (6) was synthesized from CrCl(3)(THF)(3) for structural and calculational comparisons to the chromous derivatives.     

异核过渡金属类立方烷原子簇化合物M_3S_4L_9M'X~(n+)的电子结构

本文利用定性价键理论、半经验分子轨道法和分子轨道碎片法,讨论了通式为M_3S_4L_9M′X~(n+)(M=Cr,Mo,W;M′=Fe,Co,Ni,Cu;n=0,4,5)的异核过渡金属簇合物Cr_3S_4Cp_3FeOOCCMe_3(1),Cr_3S_4Cp_3CoCO(2),Mo_3S_4(NH_3)_9FeOH_2~(4+)(3)和Mo_3S_4(OH_2)_9NiOH_2~(4+)(4)的电子结构,成键性质,以及活性元件(碎片)L_9M_3S_4~(n+)和M′X组装的合理性。指出了由于碎片组装成类立方烷后,电子从M′原子转移到M原子,使得过渡金属原子M的氧化态低于不完整类立方烷中的M原子。此外,本文还根据价键理论和分子轨道法的集居数分析,给出簇合物骨架的相对稳定性顺序是Mo_3S_4FC~(4+)>Cr_3S_4Fe~(4+)>Cr_3S_4Co~(4+)>Mo_3S_4Ni~(4+)。     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.     

Synthesis and characterization of iron(III)-substituted, dimeric polyoxotungstates, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](n-) (n = 6, X = As(III), Sb(III); n = 4, X = Se(IV), Te(IV))

Interaction of the lacunary [alpha-XW(9)O(33)](9-) (X = As(III), Sb(III)) with Fe(3+) ions in acidic, aqueous medium leads to the formation of dimeric polyoxoanions, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)) in high yield. X-ray single-crystal analyses were carried out on Na(6)[Fe(4)(H(2)O)(10)(beta-AsW(9)O(33))(2)] x 32H(2)O, which crystallizes in the monoclinic system, space group C2/m, with a = 20.2493(18) A, b = 15.2678(13) A, c = 16.0689(14) A, beta = 95.766(2) degrees, and Z = 2; Na(6)[Fe(4)(H(2)O)(10)(beta-SbW(9)O(33))(2)] x 32H(2)O is isomorphous with a = 20.1542(18) A, b = 15.2204(13) A, c = 16.1469(14) A, and beta = 95.795(2) degrees. The selenium and tellurium analogues are also reported, [Fe(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](4-) (X = Se(IV), Te(IV)). They are synthesized from sodium tungstate and a source of the heteroatom as precursors. X-ray single-crystal analysis was carried out on Cs(4)[Fe(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)] x 21H(2)O, which crystallizes in the triclinic system, space group P macro 1, with a = 12.6648(10) A, b = 12.8247(10) A, c = 16.1588(13) A, alpha = 75.6540(10) degrees, beta = 87.9550(10) degrees, gamma = 64.3610(10) gamma, and Z = 1. All title polyanions consist of two (beta-XW(9)O(33)) units joined by a central pair and a peripheral pair of Fe(3+) ions leading to a structure with idealized C(2h) symmetry. It was also possible to synthesize the Cr(III) derivatives [Cr(4)(H(2)O)(10)(beta-XW(9)O(33))(2)](6-) (X = As(III), Sb(III)), the tungstoselenates(IV) [M(4)(H(2)O)(10)(beta-SeW(9)O(33))(2)]((16)(-)(4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), and Hg(2+)), and the tungstotellurates(IV) [M(4)(H(2)O)(10)(beta-TeW(9)O(33))(2)]((16-4n)-) (M(n+) = Cr(3+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), and Hg(2+)), as determined by FTIR. The electrochemical properties of the iron-containing species were also studied. Cyclic voltammetry and controlled potential coulometry aided in distinguishing between Fe(3+) and W(6+) waves. By variation of pH and scan rate, it was possible to observe the stepwise reduction of the Fe(3+) centers.     

Crystal chemistry and physical properties of superconducting and semiconducting charge transfer salts of the type (BEDT-TTF)(4)[A(I)M(III)(C2O4)3]*PhCN (A(I) = H30,NH4,K; M(III) = Cr, Fe, Co, Al; BEDT-TTF = bis(ethylenedithio)tetrathiafulvalene

Synthesis, structure determination by single-crystal X-ray diffraction, and physical properties are reported and compared for superconducting and semiconducting molecular charge-transfer salts with stoichiometry (BEDT-TTF)(4)[A(I)M(III)(C(2)O(4))(3)].PhCN, where A(I) = H(3)O, NH(4), K; M(III) = Cr, Fe, Co, Al; BEDT-TTF = bis(ethylenedithio) tetrathiafulvalene. Attempts to substitute M(III) with Ti, Ru, Rh, or Gd are also described. New compounds with M = Co and Al are prepared and detailed structural comparisons are made across the whole series. Compounds with A = H(3)O(+) and M = Cr, Fe are monoclinic (space group C2/c), at 150, 120 K a = 10.240(1) A, 10.232(12) A; b = 19.965(1) A, 20.04(3) A; c = 34.905(1) A, 34.97(2) A; beta = 93.69(1) degrees, 93.25(11) degrees, respectively, both with Z = 4. These salts are metallic at room temperature, becoming superconducting at 5.5(5) or 8.5(5) K, respectively. A polymorph with A = H(3)O(+) and M = Cr is orthorhombic (Pbcn) with a = 10.371(2) A, b = 19.518(3) A, c = 35.646(3) A, and Z = 4 at 150 K. When A = NH(4)(+), M = Fe, Co, Al, the compounds are also orthorhombic (Pbcn), with a = 10.370(5) A, 10.340(1) A, 10.318(7) A; b = 19.588(12) A, 19.502(1) A, 19.460(4) A; c = 35.790(8) A, 35.768(1) A, 35.808(8) A at 150 K, respectively, with Z = 4. All of the Pbcn phases are semiconducting with activation energies between 0.15 and 0.22 eV. For those compounds which are thought to contain H(3)O(+), Raman spectroscopy or C=C and C-S bond lengths of the BEDT-TTF molecules confirm the presence of H(3)O(+) rather than H(2)O. In the monoclinic compounds the BEDT-TTF molecules adopt a beta' ' packing motif while in the orthorhombic phases (BEDT-TTF)(2) dimers are surrounded by monomers. Raman spectra and bond length analysis for the latter confirm that each molecule of the dimer has a charge of +1 while the remaining donors are neutral. All of the compounds contain approximately hexagonal honeycomb layers of [AM(C(2)O(4))(3)] and PhCN, with the solvent occupying a cavity bounded by [M(C(2)O(4))(3)](3-) and A. In the monoclinic series each layer contains one enantiomeric conformation of the chiral [M(C(2)O(4))(3)](3-) anions with alternate layers having opposite chirality, whereas in the orthorhombic series the enantiomers form chains within each layer. Analysis of the supramolecular organization at the interface between the cation and anion layers shows that this difference is responsible for the two different BEDT-TTF packing motifs, as a consequence of weak H-bonding interactions between the terminal ethylene groups in the donor and the [M(C(2)O(4))(3)](3-) oxygen atoms.     

Cyano-bridged Mn(III)3M(III) (M(III) = Fe, Cr) complexes: synthesis, structure, and magnetic properties

Two cyano-bridged tetranuclear complexes composed of Mn(III) salen (salen = N,N'-ethylene bis(salicylideneiminate)) and hexacyanometalate(III) (M = Fe, Cr) in a stoichiometry of 3:1 have been selectively synthesized using {NH2(n-C12H25)2}3[M(III)(CN)6] (M(III) = Fe, Cr) starting materials: [{Mn(salen)(EtOH)}3{M(CN)6}] (M = Fe, 1; Cr, 2). Compounds 1 and 2 are isostructural with a T-shaped structure, in which [M(CN)6]3- assumes a meridional-tridentate building block to bind three [Mn(salen)(EtOH)]+ units. The strong frequency dependence and observation of hysteresis on the field dependence of the magnetization indicate that 1 is a single-molecule magnet.     

Synthesis, crystal structures, and magnetic properties of a new family of heterometallic cyanide-bridged Fe(III)2M(II)2 (M=Mn, Ni, and Co) square complexes

New heterobimetallic tetranuclear complexes of formula [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Mn(II)(bpy)(2)](2)(ClO(4))(2)·CH(3)CN (1), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2a), [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Ni(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (2b), [Fe(III){HB(pz)(3)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3a), and [Fe(III){B(pz)(4)}(CN)(2)(μ-CN)Co(II)(dmphen)(2)](2)(ClO(4))(2)·2CH(3)OH (3b), [HB(pz)(3)(-) = hydrotris(1-pyrazolyl)borate, B(Pz)(4)(-) = tetrakis(1-pyrazolyl)borate, dmphen = 2,9-dimethyl-1,10-phenanthroline, bpy = 2,2'-bipyridine] have been synthesized and structurally and magnetically characterized. Complexes 1-3b have been prepared by following a rational route based on the self-assembly of the tricyanometalate precursor fac-[Fe(III)(L)(CN)(3)](-) (L = tridentate anionic ligand) and cationic preformed complexes [M(II)(L')(2)(H(2)O)(2)](2+) (L' = bidentate α-diimine type ligand), this last species having four blocked coordination sites and two labile ones located in cis positions. The structures of 1-3b consist of cationic tetranuclear Fe(III)(2)M(II)(2) square complexes [M = Mn (1), Ni (2a and 2b), Co (3a and 3b)] where corners are defined by the metal ions and the edges by the Fe-CN-M units. The charge is balanced by free perchlorate anions. The [Fe(L)(CN)(3)](-) complex in 1-3b acts as a ligand through two cyanide groups toward two divalent metal complexes. The magnetic properties of 1-3b have been investigated in the temperature range 2-300 K. A moderately strong antiferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Mn(II) (S = 5/2) ions has been found for 1 leading to an S = 4 ground state (J(1) = -6.2 and J(2) = -2.7 cm(-1)), whereas a moderately strong ferromagnetic interaction between the low-spin Fe(III) (S = 1/2) and high-spin Ni(II) (S = 1) and Co(II) (S = 3/2) ions has been found for complexes 2a-3b with S = 3 (2a and 2b) and S = 4 (3a and 3b) ground spin states [J(1) = +21.4 cm(-1) and J(2) = +19.4 cm(-1) (2a); J(1) = +17.0 cm(-1) and J(2) = +12.5 cm(-1) (2b); J(1) = +5.4 cm(-1) and J(2) = +11.1 cm(-1) (3a); J(1) = +8.1 cm(-1) and J(2) = +11.0 cm(-1) (3b)] [the exchange Hamiltonian being of the type H? = -J(S?(i)·S?(j))]. Density functional theory (DFT) calculations have been used to substantiate the nature and magnitude of the exchange magnetic coupling observed in 1-3b and also to analyze the dependence of the exchange magnetic coupling on the structural parameters of the Fe-C-N-M skeleton.     

High-nuclearity metal-cyanide clusters: synthesis,magnetic properties,and inclusion behavior of open-cage species incorporating [(tach)M(CN)3] (M = Cr,Fe, Co) complexes

The use of 1,3,5-triaminocyclohexane (tach) as a capping ligand in generating metal-cyanide cage clusters with accessible cavities is demonstrated. The precursor complexes [(tach)M(CN)(3)] (M = Cr, Fe, Co) are synthesized by methods similar to those employed in preparing the analogous 1,4,7-triazacyclononane (tacn) complexes. Along with [(tach)Fe(CN)(3)](1)(-), the latter two species are found to adopt low-spin electron configurations. Assembly reactions between [(tach)M(CN)(3)] (M = Fe, Co) and [M'(H(2)O)(6)](2+) (M' = Ni, Co) in aqueous solution afford the clusters [(tach)(4)(H(2)O)(12)Ni(4)Co(4)(CN)(12)](8+), [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+), and [(tach)(4)(H(2)O)(12)Ni(4)Fe(4)(CN)(12)](8+), each possessing a cubic arrangement of eight metal ions linked through edge-spanning cyanide bridges. This geometry is stabilized by hydrogen-bonding interactions between tach and water ligands through an intervening solvate water molecule or bromide counteranion. The magnetic behavior of the Ni(4)Fe(4) cluster indicates weak ferromagnetic coupling (J = 5.5 cm(-)(1)) between the Ni(II) and Fe(III) centers, leading to an S = 6 ground state. Solutions containing [(tach)Fe(CN)(3)] and a large excess of [Ni(H(2)O)(6)](2+) instead yield a trigonal pyramidal [(tach)(H(2)O)(15)Ni(3)Fe(CN)(3)](6+) cluster, in which even weaker ferromagnetic coupling (J = 1.2 cm(-)(1)) gives rise to an S = (7)/(2) ground state. Paralleling reactions previously performed with [(Me(3)tacn)Cr(CN)(3)], [(tach)Cr(CN)(3)] reacts with [Ni(H(2)O)(6)](2+) in aqueous solution to produce [(tach)(8)Cr(8)Ni(6)(CN)(24)](12+), featuring a structure based on a cube of Cr(III) ions with each face centered by a square planar [Ni(CN)(4)](2)(-) unit. The metal-cyanide cage differs somewhat from that of the analogous Me(3)tacn-ligated cluster, however, in that it is distorted via compression along a body diagonal of the cube. Additionally, the compact tach capping ligands do not hinder access to the sizable interior cavity of the molecule, permitting host-guest chemistry. Mass spectrometry experiments indicate a 1:1 association of the intact cluster with tetrahydrofuran (THF) in aqueous solution, and a crystal structure shows the THF molecule to be suspended in the middle of the cluster cavity. Addition of THF to an aqueous solution containing [(tach)Co(CN)(3)] and [Cu(H(2)O)(6)](2+) templates the formation of a closely related cluster, [(tach)(8)(H(2)O)(6)Cu(6)Co(8)(CN)(24) superset THF](12+), in which paramagnetic Cu(II) ions with square pyramidal coordination are situated on the face-centering sites. Reactions intended to produce the cubic [(tach)(4)(H(2)O)(12)Co(8)(CN)(12)](8+) cluster frequently led to an isomeric two-dimensional framework, [(tach)(H(2)O)(3)Co(2)(CN)(3)](2+), exhibiting mer rather than fac stereochemistry at the [Co(H(2)O)(3)](2+) subunits. Attempts to assemble larger edge-bridged cubic clusters by reacting [(tach)Cr(CN)(3)] with [Ni(cyclam)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) complexes instead generated extended one- or two-dimensional solids. The magnetic properties of one of these solids, two-dimensional [(tach)(2)(cyclam)(3)Ni(3)Cr(2)(CN)(6)]I(2), suggest metamagnetic behavior, with ferromagnetic intralayer coupling and weak antiferromagnetic interactions between layers.     

Structural and physical properties of the ferromagnetic tris-dithiooxalato compounds,A[M(II)Cr(III)(C(2)S(2)O(2))(3)], with A(+) = N(n-C(n)()H(2)(n)(+1))(4)(+) (n = 3-5) and P(C(6)H(5))(4)(+) and M(II) = Mn,Fe, Co,and Ni

The structural and magnetic properties of the tris-dithiooxalato salts, A[M(II)Cr(C(2)S(2)O(2))(3)], have been investigated with A(+) = PPh(4)(+), N(n-C(n)()H(2)(n)()(+1))(4)(+), with n = 3-5, where M(II) is Mn, Fe, Co, and Ni. With the exception of A[MnCr(C(2)S(2)O(2))(3)], all the salts are ferromagnets with Curie temperatures, T(c), between 5 and 16 K. In contrast to the corresponding oxalates which are ferromagnetic, the A[MnCr(C(2)S(2)O(2))(3)] compounds are paramagnetic above 2 K. Powder neutron diffraction studies of d(20)-PPh(4)[FeCr(C(2)S(2)O(2))(3)] indicate that no structural phase transitions occur between 2.4 and 285 K and that the coefficient of linear expansion is four times larger for the c-axis than for the a-axis. The crystal structure refined from powder neutron diffraction data confirms the honeycomb layer arrangement observed in the related bimetallic tris-oxalate salts. The M?ssbauer spectra reveal that the iron(II) in PPh(4)[FeCr(C(2)S(2)O(2))(3)] is coordinated mainly to six oxygen atoms of the dithiooxalato ligand but with a minor component of sulfur coordination that increases with aging of the sample; the iron(II) is high-spin in both cases. Powder neutron diffraction profiles of d(20)-PPh(4)[FeCr(C(2)S(2)O(2))(3)] below T(c) show magnetic intensity with a q = 0 propagation vector, confirming the presence of ferromagnetic order.     

Differing reactivities of (trimpsi)M(CO)(2)(NO) complexes [M = V,Nb, Ta; trimpsi = (t)BuSi(CH(2)PMe(2))(3)] with halogens and halogen sources

Treatment of (trimpsi)V(CO)(2)(NO) (trimpsi = (t)BuSi(CH(2)PMe(2))(3)) with 1 equiv of PhICl(2) or C(2)Cl(6) or 2 equiv of AgCl affords (trimpsi)V(NO)Cl(2) (1) in moderate yields. Likewise, (trimpsi)V(NO)Br(2) (2) and (trimpsi)V(NO)I(2) (3) are formed by the reactions of (trimpsi)V(CO)(2)(NO) with Br(2) and I(2), respectively. The complexes (trimpsi)M(NO)I(2)(PMe(3)) (M = Nb, 4; Ta, 5) can be isolated in moderate to low yields when the (trimpsi)M(CO)(2)(NO) compounds are sequentially treated with 1 equiv of I(2) and excess PMe(3). The reaction of (trimpsi)V(CO)(2)(NO) with 2 equiv of ClNO forms 1 in low yield, but the reactions of (trimpsi)M(CO)(2)(NO) (M = Nb, Ta) with 1 equiv of ClNO generate (trimpsi)M(NO)(2)Cl (M = Nb, 6; Ta, 7). Complexes 6 and 7 are thermally unstable and decompose quickly at room temperature; consequently, they have been characterized solely by IR and (31)P[(1)H] NMR spectroscopies. All other new complexes have been fully characterized by standard methods, and the solid-state molecular structures of 1.3CH(2)Cl(2), 4.(3/4)CH(2)Cl(2), and 5.THF have been established by single-crystal X-ray diffraction analyses. A convenient method of generating Cl(15)NO has also been developed during the course of these investigations.     

Different transmetallation behaviour of [M(P4HR4)] salts toward rhodium(I) and copper(I) (M = Na, K; R = Ph, Mes; Mes = 2,4,6-Me3C6H2)

[K(2)(P(4)Mes(4))] (1) or [Na(2)(THF)(4)(P(4)Mes(4))] (2) (Mes = 2,4,6-Me(3)C(6)H(2)) reacts with one equivalent of HCl and subsequently with 0.5 equivalents of [{RhCl(cod)}(2)] (cod = 1,5-cyclooctadiene) to give a mixture of rhodium complexes, from which [Rh(P(4)HMes(4))(cod)] (3) and the secondary product [Rh(2)(micro-P(2)HMes(2))(mu-PHMes)(cod)(2)] (4) were isolated and characterised by X-ray diffraction studies. Alternatively, the reaction of [K(2)(P(4)Ph(4))] (5) or [Na(2)(THF)(5)(P(4)Ph(4))] (6) with one equivalent of HCl and subsequently with one equivalent of [CuCl(PCyp(3))(2)] (Cyp = cyclo-C(5)H(9)) gave the complex [Cu(4)(P(4)Ph(4))(2)(PH(2)Ph)(2)(PCyp(3))(2)] (7), presumably via disproportionation of the monoanion (P(4)HPh(4))(-).     

Na(THF)2Cr(N3N)]: The first trigonal monopyramidal chromium(II) complex

Reduction of [Cr(N(3)N)] (1) [(N(3)N)(3)(-) = ((SiMe(3)NCH(2)CH(2))(3)N)(3)(-)] with sodium powder in THF affords the yellow, extremely air-sensitive amidochromate(II) [Na(THF)(2)Cr(N(3)N)] (2) in good yield. Complex 2 has an effective magnetic moment of 5.1 mu(B) indicative of a d(4) high-spin electronic configuration. (1)H NMR spectroscopy in solution and single-crystal X-ray crystallography show that compound 2 is composed of idealized C(s) symmetric contact ion pairs, in which trigonal-monopyramidal [Cr(II)(N(3)N)](-) anions are linked to the [Na(THF)(2)](+) countercations by two bridging amide ligands. DFT calculations of 1, 2, and the anion [Cr(N(3)N)](-) at the RI-BP86/TZVPP level of theory provide in combination with extended Hückel calculations a rationale for the observed structural changes from 1 to 2.     

Field-induced magnetic transitions in metal phosphonates with ladderlike chain structures: (NH3C6H4NH3)M2(hedpH)2.H2O [M = Fe, Co, Mn, Zn; hedp = C(CH3)(OH)(PO3)2

This paper reports the syntheses and characterization of four isomorphous compounds (NH(3)C(6)H(4)NH(3))M(2)(hedpH)(2).H(2)O [M = Fe (1), Co (2), Mn (3), Zn (4); hedp = C(CH(3))(OH)(PO(3))(2)]. Each contains two crystallographically different kinds of {M(2)(hedpH)(2)}(n) double chains, where the {M(2)(mu-O)(2)} dimer units are connected by O-P-O bridges. The double chains are connected through extensive hydrogen bonds, hence generating a three-dimensional supramolecular network. The temperature-dependent magnetic susceptibility measurements show dominant antiferromagnetic interactions in compounds 1-3, mediated through the mu-O and/or O-P-O bridges between the metal(II) centers. The magnetization measurements reveal that compounds 1-3 experience field-induced magnetic transitions at low temperatures.     

Synthesis and Characterization of Four Consecutive Members of the Five-Member [Fe(6)S(8)(PEt(3))(6)](n)()(+) (n = 0-4) Cluster Electron Transfer Series

The clusters [Fe(6)S(8)(PEt(3))(6)](+,2+) have been shown by other investigators to be formed by the reaction of [Fe(OH(2))(6)](2+) and H(2)S, to contain face-capped octahedral Fe(6)S(8) cores, and to be components of the five-membered electron transfer series [Fe(6)S(8)(PEt(3))(6)](n)()(+) (n = 0-4) estalished electrochemically. We have prepared two additional series members. Reaction of [Fe(6)S(8)(PEt(3))(6)](2+) with iodine in dichloromethane affords [Fe(6)S(8)(PEt(3))(6)](3+), isolated as the perchlorate salt (48%). Reduction of [Fe(6)S(8)(PEt(3))(6)](2+) with Na(Ph(2)CO) in acetonitrile/THF produces the neutral cluster [Fe(6)S(8)(PEt(3))(6)] (65%). The structures of the four clusters with n = 0, 1+, 2+, 3+ were determined at 223 K. The compounds [Fe(6)S(8)(PEt(3))(6)](ClO(4))(3), [Fe(6)S(8)(PEt(3))(6)] crystallize in trigonal space group R&thremacr;c with a = 21.691(4), 16.951(4) ?, c = 23.235(6), 19.369(4) ?, and Z = 6, 3. The compounds [Fe(6)S(8)(PEt(3))(6)](BF(4))(2), [Fe(6)S(8)(PEt(3))(6)](BF(4)).2MeCN were obtained in monoclinic space groups P2(1)/c, C2/c with a = 11.673(3), 16.371(4) ?, b = 20.810(5), 16.796(4) ?, c = 12.438(4), 23.617(7) ?, beta = 96.10(2), 97.98(2) degrees, and Z = 2, 4. [Fe(6)S(8)(PEt(3))(6)](BPh(4))(2) occurred in trigonal space group P&onemacr; with a = 11.792(4) ?, b = 14.350(5) ?, c = 15.536(6) ?, alpha = 115.33(3) degrees, beta = 90.34(3) degrees, gamma = 104.49(3) degrees, and Z = 1. Changes in metric features across the series are slight but indicate increasing population of antibonding Fe(6)S(8) core orbitals upon reduction. Zero-field M?ssbauer spectra are consistent with this result, isomer shifts increasing by ca. 0.05 mm/s for each electron added, and indicate a delocalized electronic structure. Magnetic susceptibility measurements together with previously reported results established the ground states S = (3)/(2) (3+), 3 (2+), (7)/(2) (1+), 3 (0). The clusters [Fe(6)S(8)(PEt(3))(6)](n)()(+) possess the structural and electronic features requisite to multisequential electron transfer reactions. This work provides the first example of a cluster type isolated over four consecutive oxidation states. Note is also made of the significance of the [Fe(6)S(8)(PEt(3))(6)](n)()(+) cluster type in the development of iron-sulfur-phosphine cluster chemistry.     

Synthesis, Reactivity, and Structural Characterization of the Nonclassical [MTe(7)](n)()(-) Anions (M = Ag, Au, n = 3; M = Hg, n = 2)

Several tellurometalates of the general formula [MTe(7)](n)()(-) (n = 2, 3) have been isolated as salts of organic cations by reaction of suitable metal sources with polytelluride solutions in DMF. The [HgTe(7)](2)(-) anion has the same structure in both the NEt(4)(+) and the PPh(4)(+) salts except for a minor change in the ligand conformation. The [AgTe(7)](3)(-) and [HgTe(7)](2)(-) anions contain metal atoms coordinated in trigonal-planar fashion to eta(3)-Te(7)(4)(-) ligands. The central Te atom of an eta(3)-Te(7)(4)(-) ligand is coordinated to the metal atom and to two Te atoms in a "T"-shaped geometry consistent with a hypervalent 10 e(-) center. The planar [AuTe(7)](3)(-) anion may best be described as possessing a square-planar Au(III) atom coordinated to an eta(3)-Te(5)(4)(-) ligand and to an eta(1)-Te(2)(2)(-) ligand. The reaction of [NEt(4)](n)()[MTe(7)] (M = Hg, n = 2; M = Au, n = 3) with the activated acetylene dimethyl acetylenedicarboxylate (DMAD) has yielded the products [NEt(4)](n)()[M(Te(2)C(2)(COOCH(3))(2))(2)] (M = Hg, n = 2; M = Au, n = 1). The metal atoms are coordinated to two Te(COOCH(3))C=C(COOCH(3))Te(2)(-) ligands, for M = Hg in a distorted tetrahedral fashion and for M = Au in a square-planar fashion.