Synthesis of dumbbell-shaped Au-Ag core-shell nanorods by seed-mediated growth under alkaline conditions

We report a simple synthesis of Au-Ag core-shell nanorods (NRs) under alkaline conditions (pH 8.0-10.0) from silver and ascorbate ions using gold nanorods (GNRs) as the seeds. The silver ions that are reduced by the ascorbate ions become deposited on the surfaces of the GNRs to form differently dumbbell-shaped Au-Ag core-shell NRs and nanoparticles, depending on the pH and the concentration of silver ions. The longitudinal plasmon absorbance bands of the Au-Ag core-shell NRs are stronger and appear at shorter wavelengths than those for the original GNRs. We confirmed the formation of Au-Ag core-shell NRs by both energy-dispersive X-ray spectrometry and inductively coupled plasma mass spectrometry measurements, which indicate that the 109Ag/197Au ratios are 0.046, 0.085, and 0.097 at pH 8.0, 9.0, and 10.0, respectively. The transmission electron microscopy measurements show that the Au-Ag core-shell NRs are monodispersed (>90%).     

Core-satellites assembly of silver nanoparticles on a single gold nanoparticle via metal ion-mediated complex

We report core-satellites (Au-Ag) coupled plasmonic nanoassemblies based on bottom-up, high-density assembly of molecular-scale silver nanoparticles on a single gold nanoparticle surface, and demonstrate direct observation and quantification of enhanced plasmon coupling (i.e., intensity amplification and apparent spectra shift) in a single particle level. We also explore metal ion sensing capability based on our coupled plasmonic core-satellites, which enabled at least 1000 times better detection limit as compared to that of a single plasmonic nanoparticle. Our results demonstrate and suggest substantial promise for the development of coupled plasmonic nanostructures for ultrasensitive detection of various biological and chemical analytes.     

Polyelectrolyte-templated synthesis of bimetallic nanoparticles

Bimetallic nanoparticles (NPs) are known to exhibit enhanced optical and catalytic properties that can be optimized by tailoring NP composition, size, and morphology. Galvanic deposition of a second metal onto a primary metal NP template is a versatile method for fabricating bimetallic NPs using a scalable, solution-based synthesis. We demonstrate that the galvanic displacement reaction pathway can be controlled through appropriate surface modification of the NP template. To synthesize bimetallic Au-Ag NPs, we used colloidal Ag NPs modified by layer-by-layer (LBL) assembled polyelectrolyte layers to template the reduction of HAuCl(4). NPs terminated with positively and negatively charged polyelectrolytes yield highly contrasting morphologies and Au surface concentrations. We propose that these charged surface layers control galvanic charge transfer by controlling nucleation and diffusion at the deposition front. This surface-directed synthetic strategy can be advantageously used to tailor both overall NP morphology and Au surface concentrations.     

Fluorescent Au@Ag core-shell nanoparticles with controlled shell thickness and Hg(II) sensing

Au-Ag core-shell nanoparticles have been synthesized using synthetic fluorescent dipeptide β-Ala-Trp (β-Ala is β-alanine; Trp is l-tryptophan) in water at pH 6.94 and at room temperature. The synthesis of the Au-Ag core-shell nanomaterial does not involve any external reducing and stabilizing agents, and the constituents of dipeptide β-alanine and l-tryptophan are naturally occurring. Therefore, the synthesis procedure is ecofriendly. Moreover, the shell thickness has also been controlled, and the optical property of the core-shell nanomaterial varies with the shell thickness. The core-shell nanomaterial exhibits a fascinating fluorescence property. This fluorescent Au@Ag core-shell nanoparticle can detect toxic Hg(II) ions ultrasensitively (with a lower limit of detection of 9 nM) even in presence of Zn(II), Cd(II), and other bivalent metal ions (Ca(II), Mg(II), Ni(II), Mn(II), Ba(II), Sr(II), Pb(II), and Fe(II)). Au-Ag core-shell nanomaterials can also be reused for sensing Hg(II) ions.     

Evolution of catalytic activity of Au-Ag bimetallic nanoparticles on mesoporous support for CO oxidation

We report a novel Au-Ag alloy catalyst supported on mesoporous aluminosilicate Au-Ag@MCM prepared by a one-pot synthesis procedure, which is very active for low-temperature CO oxidation. The activity was highly dependent on the hydrogen pretreatment conditions. Reduction at 550-650 degrees C led to high activity at room temperature, whereas as-synthesized or calcined samples did not show any activity at the same temperature. Using various characterization techniques, such as XRD, UV-vis, XPS, and EXAFS, we elucidated the structure and surface composition change during calcination and the reduction process. The XRD patterns show that particle size increased only during the calcination process on those Ag-containing samples. XPS and EXAFS data demonstrate that calcination led to complete phase segregation of the Au-Ag alloy and the catalyst surface is greatly enriched with AgBr after the calcination process. However, subsequent reduction treatment removed Br- completely and the Au-Ag alloy was formed again. The surface composition of the reduced Au-Ag@MCM (nominal Au/Ag = 3/1) was more enriched with Ag, with the surface Au/Ag ratio being 0.75. ESR spectra show that superoxides are formed on the surface of the catalyst and its intensity change correlates well with the trend of catalytic activity. A DFT calculation shows that CO and O2 coadsorption on neighboring sites on the Au-Ag alloy was stronger than that on either Au or Ag. The strong synergism in the coadsorption of CO and O2 on the Au-Ag nanoparticle can thus explain the observed synergetic effect in catalysis.     

Electron－rich Polynuclear Transition Metal Clusters：Ⅱ．Synthetic and Structural Studies of Some Polynuclear Coinage Metal Cluster Compounds

Ｅｌｅｃｔｒｏｎ－ｒｉｃｈＰｏｌｙｎｕｃｌｅａｒＴｒａｎｓｉｔｉｏｎＭｅｔａｌＣｌｕｓｔｅｒｓ：Ⅱ．ＳｙｎｔｈｅｔｉｃａｎｄＳｔｒｕｃｔｕｒａｌＳｔｕｄｉｅｓｏｆＳｏｍｅＰｏｌｙｎｕｃｌｅａｒＣｏｉｎａｇｅＭｅｔａｌＣｌｕｓｔｅｒＣｏｍｐｏｕｎｄｓＨ...     

Differential SERS activity of gold and silver nanostructures enabled by adsorbed poly(vinylpyrrolidone)

We report that poly(vinylpyrrolidone) (PVP), a common stabilizer of colloidal dispersions of noble metal nanostructures, has a dramatic effect on their surface-enhanced Raman scattering (SERS) activity and enables highly selective SERS detection of analytes of various type and charge. Nanostructures studied include PVP-stabilized Au-Ag nanoshells synthesized by galvanic exchange reaction of citrate-reduced Ag nanoparticles (NPs), as well as solid citrate-reduced Ag and Au NPs, both before and after stabilization with PVP. All nanostructures were characterized in terms of their size, surface plasmon resonance wavelength, surface charge, and chemical composition. While the SERS activities of the parent citrate-reduced Ag and Au NPs are similar for rhodamine 6G (R6G) and 1,2-bis(4-pyridyl)ethylene (BPE) at various pH values, PVP-stabilized nanostructures demonstrate large differences in SERS enhancement factors (EFs) between these analytes depending on their chemical nature and protonation state. At pH values higher than BPE's pK(a2) of 5.65, where the analyte is largely unprotonated, the PVP-coated Au-Ag nanoshells showed a high SERS EF of >10(8). In contrast, SERS EFs were 10(3)- to 10(5)-fold lower for the protonated form of BPE at lower pH values, or for the usually highly SERS-active cationic R6G. The differential SERS activity of PVP-stabilized nanostructures is a result of discriminatory binding of analytes within-adsorbed PVP monolayer and a subsequent increase of analyte concentration at the nanostructure surface. Our experimental and theoretical quantum chemical calculations show that BPE binding with PVP-stabilized Au-Ag nanoshells is stronger when the analyte is in its unprotonated form as compared to its cationic, protonated form at a lower pH.     

Ultrafast spectroscopy and coherent acoustic phonons of Au-Ag core-shell nanorods

We performed the first investigations of coherent acoustic phonons in Au-Ag core-shell nanorods, which were compared with the results of parental Au nanorods. Both breathing and extensional modes were observed in Au-Ag core-shell nanorods with ~11 nm Ag shell while only extensional modes were detected in other core-shell nanorods with 4-7 nm Ag shell. Young's modulus estimated from the oscillation period of extensional modes was found to be larger for Au-Ag core-shell nanorods with ~4 nm Ag shell, as compared with that of Au nanorods. The value of Young's modulus decreases with the increase of the Ag shell thickness and finally becomes smaller than that of Au nanorods. This phenomenon is interpreted in terms of the surface effects and the existence of grain boundaries in the lattice structure of Ag shell.     

The synthesis of translucent polymer nanolatexes via microemulsion polymerization

Surface-enhanced Raman scattering (SERS)-active substrates of polyvinyl alcohol/gold-silver (PVA/Au-Ag) nanofibers were prepared using a simple approach involving electrospinning. The tunable surface plasmon resonance (SPR) of gold-silver alloy (Au-Ag alloy) nanoparticles (NPs) was achieved by controlling the feed ratio between gold and silver precursors. A higher concentration of Au-Ag alloy NPs could be obtained than the conventional methods, using 1wt% of PVA as the stabilizer. The Au-Ag alloy structure was demonstrated by HRTEM and STEM-EDX. After the electrospinning, the Au-Ag alloy NPs were successfully embedded in PVA nanofibers, as shown in the SEM and TEM images. Raman spectra displayed an apparent enhancement in the signal of 4-mercaptobenzoic acid (4-MBA), pyridine, and thiophenol molecules pre-absorbed from their ethanol solution onto the PVA/Au-Ag nanofibers. Different SERS effects were achieved by varying the Au content or excitation wavelength.     

Silica-coated, Au/Ag striped nanowires for bioanalysis

Striped metallic nanowires (NW) have been coated with a silica shell of controllable thickness (6-150 nm), and the assay performance of coated vs uncoated NW has been compared. The silica coating does not interfere with identification of the metal striping pattern and protects Ag segments from oxidation, extending the range of assay conditions under which barcoded NW can be used. Much higher and more uniform fluorescence intensities were observed for dye-labeled ssDNA bound to SiO2-coated as compared to intensities for uncoated NW. Simultaneous, multiplexed DNA hybridization assays for three pathogen-specific target sequences on SiO2-coated NW showed good discrimination of complementary from noncomplementary targets. Application of SiO2-coated NW in discrimination of single base mismatches corresponding to a mutation of the p53 gene was also demonstrated. Finally, we have shown that thiolated probe DNA resists desorption under thermocycling conditions if attached via siloxane chemistry to SiO2-coated NW, but not if it is attached via direct adsorption to bare Au/Ag NW.     

An unconventional role of ligand in continuously tuning of metal-metal interfacial strain

We show that embedding of a surface ligand can dramatically affect the metal-metal interfacial energy, making it possible to create nanostructures in defiance of traditional wisdom. Despite matching Au-Ag lattices, Au-Ag hybrid NPs can be continuously tuned from concentric core-shell, eccentric core-shell, acorn, to dimer structures. This method can be extended to tune even Au-Au and Ag-Ag interfaces.     

Noble metal nanostructure both as a SERS nanotag and an analyte probe

We report nanotags encapsulated in Au-Ag nanostructure that are active in surface-enhanced Raman scattering. The Au-Ag nanoshells are filled with Ag via citrate reduction, entrapping label molecules in the process. The nanotags can be used for quantitative SERS measurements with the label molecules as internal reference.     

Fabrication of Eutectic Ga-In Nanowire Arrays Based on Plateau–Rayleigh Instability

We have developed a simple method of fabricating liquid metal nanowire (NW) arrays of eutectic GaIn (EGaIn). When an EGaIn droplet anchored on a flat substrate is pulled perpendicular to the substrate surface at room temperature, an hourglass shaped EGaIn is formed. At the neck of the shape, based on the Plateau–Rayleigh instability, the EGaIn bridge with periodically varying thicknesses is formed. Finally, the bridge is broken down by additional pulling. Then, EGaIn NW is formed at the surface of the breakpoint. In addition, EGaIn NW arrays are found to be fabricated by pulling multiple EGaIn droplets on a substrate simultaneously. The average diameter of the obtained NW was approximately 0.6 μm and the length of the NW depended on the amount of droplet anchored on the substrate. The EGaIn NWs fabricated in this study may be used for three-dimensional wiring for integrated circuits, the tips of scanning probe microscopes, and field electron emission arrays.     

Directional synthesis and assembly of bimetallic nanosnowmen with DNA

Synthesizing and assembling nanoscale building blocks to form anisotropic nanostructures with the desired composition and property are of paramount importance for the understanding and use of nanostructured materials. Here we report a salt-tuned synthetic strategy using DNA-modified Au nanoparticles (DNA-AuNPs) to form Au-Ag head-body nanosnowman structures in >95% yield. We propose a mechanism for the formation of asymmetric Au-Ag nanosnowmen from DNA-AuNPs, salts, and Ag-precursor-loaded polymers. Importantly, we show that oriented assemblies of various nanostructures are readily obtained using nanosnowmen with asymmetrically modified DNA as building blocks.     

基于金银合金薄膜的波长检测型表面等离子体共振传感器

从实验和理论两方面详细研究了金银合金膜表面等离子体共振(SPR)传感器在可见光波段的敏感特性.实验方面,通过在玻璃基底上溅射50 nm厚的金银合金薄膜制备了一种新型的SPR传感芯片,并且自行搭建了基于Kretschmann结构的波长检测型SPR传感器测试平台.利用不同浓度的氯化钠(NaCl)水溶液和浓度为10μmol·L-1的牛血清蛋白(BSA)水溶液分别作为折射率样品和分子吸附样品,研究了传感器的折射率灵敏度和吸附灵敏度,并与金膜和银膜SPR传感器进行了对比研究.结果表明,对于折射率灵敏度的测试,金银合金膜SPR传感器大幅高于金膜SPR传感器,略低于银膜SPR传感器;而对于吸附敏感的研究,金银合金膜SPR传感器的灵敏度与银膜SPR传感器相近,是金膜SPR传感器的3倍.理论方面,利用菲涅尔公式和等效折射率计算公式仿真计算了这三种薄膜结构的SPR传感器的灵敏度和精确度,结果指出金银合金膜SPR传感器的灵敏度与银膜SPR传感器接近,是常规金膜SPR传感器的2.31倍,而半高峰宽仅为金膜和银膜SPR传感器的1.36倍.在稳定性方面,金银合金膜SPR传感器与金膜SPR传感器均具有良好的化学稳定性,而银膜SPR传感器较易氧化,使用寿命低,不常被采用.综上,金银合金膜在改善传感器灵敏度的同时,不会降低精度,是一种高灵敏、低成本、良好稳定性的SPR传感器敏感材料.     

Synergistic effect in an Au-Ag alloy nanocatalyst: CO oxidation

Au-Ag alloy nanoparticles supported on mesoporous aluminosilicate have been prepared by one-pot synthesis using hexadecyltrimethylammonium bromide (CTAB) both as a stabilizing agent for nanoparticles and as a template for the formation of mesoporous structure. The formation of Au-Ag alloy nanoparticles was confirmed by X-ray diffraction (XRD), ultraviolet-visible (UV-vis) spectroscopy, and transmission electron microscopy (TEM). Although the Au-Ag alloy nanoparticles have a larger particle size than the monometallic gold particles, they exhibited exceptionally high activity in catalysis for low-temperature CO oxidation. Even at a low temperature of 250 K, the reaction rate can reach 8.7 x 10(-6) mol.g(cat.)(-1).s(-1) at an Au/Ag molar ratio of 3/1. While neither monometallic Au@MCM-41 nor Ag@MCM-41 shows activity at this temperature, the Au-Ag alloy system shows a strongly synergistic effect in high catalytic activity. In this alloy system, the size effect is no longer a critical factor, whereas Ag is believed to play a key role in the activation of oxygen.     

基于金银合金薄膜的波长检测型表面等离子体共振传感器

从实验和理论两方面详细研究了金银合金膜表面等离子体共振（SPR）传感器在可见光波段的敏感特性. 实验方面,通过在玻璃基底上溅射50 nm厚的金银合金薄膜制备了一种新型的SPR传感芯片,并且自行搭建了基于Kretschmann 结构的波长检测型SPR传感器测试平台. 利用不同浓度的氯化钠（NaCl）水溶液和浓度为10 μmol·L^-1的牛血清蛋白（BSA）水溶液分别作为折射率样品和分子吸附样品,研究了传感器的折射率灵敏度和吸附灵敏度,并与金膜和银膜SPR传感器进行了对比研究. 结果表明,对于折射率灵敏度的测试,金银合金膜SPR传感器大幅高于金膜SPR传感器,略低于银膜SPR传感器;而对于吸附敏感的研究,金银合金膜SPR传感器的灵敏度与银膜SPR传感器相近,是金膜SPR传感器的3倍. 理论方面,利用菲涅尔公式和等效折射率计算公式仿真计算了这三种薄膜结构的SPR传感器的灵敏度和精确度,结果指出金银合金膜SPR传感器的灵敏度与银膜SPR传感器接近,是常规金膜SPR传感器的2.31倍,而半高峰宽仅为金膜和银膜SPR传感器的1.36 倍. 在稳定性方面,金银合金膜SPR传感器与金膜SPR传感器均具有良好的化学稳定性,而银膜SPR传感器较易氧化,使用寿命低,不常被采用. 综上,金银合金膜在改善传感器灵敏度的同时,不会降低精度,是一种高灵敏、低成本、良好稳定性的SPR传感器敏感材料.     

Au-Ag hybrid nanoparticle patterns of tunable size and density on glass and polymeric supports

This paper describes a method to pattern surfaces with Au-Ag hybrid nanoparticles. We used block copolymer micelle lithography of Au nanoparticles and electroless deposition of Ag. The combination of these two methods enables independent tuning of nanoparticle spacing and Ag-shell size. For this purpose, 8 nm large patterned Au nanoparticle seeds served as nuclei for the electroless deposition of silver that is based on a modified Tollens process with glucose. By adjusting the reaction conditions, specific growth of Ag on top of the Au seeds has been accomplished and analyzed by SEM, HRTEM, XEDS, and UV-vis spectroscopy. We could show that this versatile and green method is feasible on glass as well as on biomedical-relevant polymers like poly(ethylene glycol) hydrogels and amorphous Teflon. In conclusion, this method provides a new route to pattern glass and polymeric surfaces with Au-Ag hybrid nanoparticles. It will have many uses in applications such as surface enhanced Raman spectroscopy (SERS) or antimicrobial coatings for which hybrid nanoparticle density, size, and morphology are important.     

Electrochemiluminescence biosensor for carcinoembryonic antigen detection based on Au-Ag/g-C3N4 nanocomposites

Herein, an electrochemiluminescence (ECL) aptasensor for carcinoembryonic antigen (CEA) detection was developed based on Au-Ag/g-C₃N₄ nanocomposites (NCs), which were synthesized by decorating graphitic carbon nitride (g-C₃N₄) nanosheets with alloy-structured Au-Ag bimetallic nanoparticles (NPs) via one-step in situ chemical reduction. As ECL sensing platform, Au-Ag/g-C₃N₄ NCs could significantly improve the ECL intensity of luminol due to the good conductivity of Au-Ag NPs, electrocatalytic activity for oxygen evolution reaction (OER) and the ability to adsorb luminol via π stacking interaction. In addition, it could load the thiol terminated aptamers of CEA via Au-S or Ag-S bonds. In the presence of CEA, the ECL response of the proposed biosensor decreased significantly due to the fact that the assembled protein layers hindered the electron transfer and the diffusion of ECL reactants toward the electrode surface. The proposed ECL sensor exhibited a good linear relationship with CEA in the range of 1.0–1.0 × 10^?6 ng/mL with a detection limit of 8.9 × 10^?7 ng/mL. The satisfactory results were obtained in the detection of CEA in human serum samples.     

Au-Ag template stripped pattern for scanning probe investigations of DNA arrays produced by dip pen nanolithography

We report on DNA arrays produced by dip pen nanolithography (DPN) on a novel Au-Ag micropatterned template stripped surface. DNA arrays have been investigated by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) showing that the patterned template stripped substrate enables easy retrieval of the DPN-functionalized zone with a standard optical microscope permitting multi-instrument and multitechnique local detection and analysis. Moreover the smooth surface of the Au squares ( approximately 5-10 A roughness) allows AFM/STM to be sensitive to the hybridization of the oligonucleotide array with label-free target DNA. Our Au-Ag substrates, combining the retrieving capabilities of the patterned surface with the smoothness of the template stripped technique, are candidates for the investigation of DPN nanostructures and for the development of label-free detection methods for DNA nanoarrays based on the use of scanning probes.