Ni(II) complexation to amorphous hydrous ferric oxide: an X-ray absorption spectroscopy study

Ni(II) sorption onto iron oxides and in particular hydrous ferric oxide (HFO) is among the important processes impacting its distribution, mobility, and bioavailability in environment. To develop mechanistic models for Ni, extended X-ray absorption fine structure (EXAFS) analysis has been conducted on Ni(II) sorbed to HFO. Coprecipitation revealed the formation of the metastable alpha-Ni(OH)(2) at a Ni(II) loading of 3.5 x 10(-3) molg(-1). On the other hand, Ni(II) formed inner-sphere mononuclear bidentate complexes along edges of FeO(6) octahedra when sorbed to HFO surfaces with Ni-O distances of 2.05-2.07 A and Ni-Fe distances of 3.07-3.11 A. This surface complex was observed by EXAFS study over 2.8 x 10(-3) to 10(-1) ionic strength, pH from 6 to 7, a Ni(II) loading of 8 x 10(-4) to 8.1 x 10(-3) molg(-1) HFO, and reaction times from 4 hours to 8 months. The short- and long-range structure analyses suggest that the presence of Ni(II) inhibited transformation of the amorphous iron oxide into a more crystalline form. However, Ni(2+) was not observed to substitute for Fe(3+) in the oxide structure. This study systematically addresses Ni(II) adsorption mechanisms to amorphous iron oxide. The experimentally defined surface complexes can be used to constrain surface complexation modeling for improved prediction of metal distribution at the iron oxide/aqueous interface.     

Synthesis, structural characterization, and magnetic studies of polynuclear iron complexes with a new disubstituted pyridine ligand

A series of novel polyiron species have been prepared from the reaction of iron chloride with the 2,5-disubstituted pyridines H2L(n) (H2L1) = N,N'-bis(n-butylcarbamoyl)pyridine-2,6-dicarboxamide; H2L2 = N,N'-bis(n-ethylcarbamoyl)pyridine-2,6-dicarboxamide). By small modifications of the experimental conditions under which the reactions are carried out, it has been possible to prepare the quadruply stranded diiron(II) complex [Fe2(mu-H2L1)4(mu-Cl)2][FeCl4]2 (1), the metallamacrocycle [Fe2(mu-H2L1)2(THF)4Cl2][FeCl4]2 (2), the hexairon(III) compound [Fe6(L1)2(mu-OMe)6(mu4-O)2Cl4] (3), and the mixed-valence trinuclear iron complexes [Fe3(L(n))3(mu3-O)] (n = 1, 4; n = 2, 5). The X-ray crystal structures of 3 and 5 and magnetic studies for all the compounds are herein presented. Interestingly, the structural analysis of 5 at room temperature indicates that one of the iron centers is Fe(III) while the other two have an average valence state between Fe(II) and Fe(III). The five complexes herein presented demonstrate the great versatility that the new ligand has as a building block for the formation of supramolecular coordination assemblies.     

Speciation in the ternary system Iron(III)-nitrilotrimethylphosphonic acid-1,3-dicarboxypropane-1-iminodiacetic acid

The interaction of iron(III) ions with nitrilotrimethylphosphonic acid and 1,3-dicarboxypro-pane-1-iminodiacetic acid in aqueous solutions has been studied by spectrophotometry. It has been shown that complex formation in the system is complicated by protonation, hydrolysis, and precipitation. Homoligand 1: 1 complexes of different proton composition have been identified. The stability constants of the iron(III) complexonates and their fractional distribution as a function of pH (T = 20 ± 2°C, I = 0.1) have been determined. Conditions that make it possible to prevent the precipitation of iron(III) nitrilotrimethylphosphonates in the presence of 1,3-dicarboxypropane-1-iminodiacetic acid have been selected.     

Sorption of silicates on goethite, hematite, and magnetite: experiments and modelling

Sorption of H(4)SiO(4) (including experiments as a function of time, K(d) measurement with different m/v ratios and sorption edges) onto different iron (hydro)oxides as goethite (alpha-FeOOH), hematite (alpha-Fe(2)O(3)), and magnetite (Fe(3)O(4)) has been studied with concentration of silicates under solubility limit. A surface complexation model has been used to account for sorption edge of silicates onto these iron oxide surfaces. It reveals that two types of surface complex namely FeH(3)SiO(4) and FeH(2)SiO(4)(-), are needed to describe properly the experimental observations.     

The solvent extraction of iron from steel solutions with 2-hexylpyridine prior to the determination of trace elements

The distribution of iron(III) between aqueous hydrochloric acid and 0.1M 2-hexylpyridine in benzene was examined as a function of acid concentration in the aqueous solution, the metal concentration being kept constant, and as a function of increasing ferric chloride concentration at a constant acidity of hydrochloric acid. The distribution coefficient of Fe(III) (tracer) is dependent on the square of the 2-hexylpyridine concentration in the benzene phase. Negatively charged complexes of the type FeCl(2-)(5) may be the species extracted. The formation of a mixture of 1:1 and 1:2 complexes with 2-hexylpyridine is indicated. Salting-out effects of a number of salts have been investigated. Separation factors of several metal ions relative to iron(III) in 7M hydrochloric acid are also reported. The results indicate that iron(III) can be selectively separated from a large number of elements, and the method has been utilized for the preconcentration of non-ferrous metal ions in mild steels by selective separation of iron, before their subsequent determination by emission spectrometry.     

Iron(III) complexes of tridentate 3N ligands as functional models for catechol dioxygenases: the role of ligand N-alkyl substitution and solvent on reaction rate and product selectivity

A series of iron(III) complexes of the type [Fe(L)Cl3], where L is the variously N-alkyl-substituted bis(pyrid-2-ylmethyl)amine ligand such as bis(pyrid-2-ylmethyl)amine (L1), N,N-bis(pyrid-2-ylmethyl)methylamine (L2), N,N-bis(pyrid-2-ylmethyl)-n-propylamine (L3), N,N-bis(pyrid-2-ylmethyl)-iso-butylamine (L4), N,N-bis(pyrid-2-ylmethyl)-iso-propylamine (L5), N,N-bis(pyrid-2-ylmethyl)cyclohexylamine (L6), and N,N-bis(pyrid-2-ylmethyl)-tert-butylamine (L7), have been isolated and characterized by elemental analysis and spectral and electrochemical methods. The crystal structures of the complexes [Fe(L2)Cl3] 2, [Fe(L3)Cl3] 3, and the complex-substrate adduct [Fe(L5)(TCC)(NO3)] 5a, where TCC2- is the tetrachlorocatecholate dianion, have been determined by single-crystal X-ray crystallography. The complexes [Fe(L2)Cl3] 2 and [Fe(L3)Cl3] 3 possess a distorted octahedral geometry, in which the linear tridentate 3N ligands are cis-facially coordinated to the iron(III) center, and three chloride ions occupy the remaining coordination sites. The replacement of the N-methyl group in 2 by N-n-propyl group as in 3 leads to the formation of the Fe-Npy bonds and also the Fe-Cl bonds located trans to them of different lengths. The catecholate adduct 5a also possesses a distorted octahedral geometry, in which the ligand is cis-facially coordinated to iron(III) center, TCC2- is asymmetrically chelated trans to the two pyridyl moieties of the ligand, and one of the oxygen atoms of the nitrate ion occupies the sixth coordination site. All of the present complexes have been interacted with simple and substituted catechols. The catecholate adducts [Fe(L)(DBC)Cl] and [Fe(L)(DBC)(Sol)]+, where H2DBC is 3,5-di-tert-butylcatechol and Sol=H2O/CH3CN, have been generated in situ, and their spectral and redox properties and dioxygenase activities have been studied in dimethylformamide and dichloromethane solutions. All of the complexes catalyze the cleavage of H2DBC using molecular oxygen to afford both intra- and extradiol cleavage products. The formation of extradiol cleavage products is facilitated by cis-facial coordination of the 3N ligands and availability of vacant coordination site on iron(III) center for dioxygen binding. It is remarkable that the nature of the N-alkyl substituent in 3N ligands controls the regioselectivity of cleavage, with the n-propyl, iso-butyl, iso-propyl, and cyclohexyl groups enhancing the yield of extradiol products (46-68%) in dichloromethane. The rate of oxygenation depends upon the solvent and the Lewis acidity of iron(III) center as modified by the sterically demanding N-alkyl groups-length and degree of substitution. The plot of log (kO2) versus energy of the low-energy DBC2--to-iron(III) LMCT band is linear, demonstrating the importance of the Lewis acidity of the iron(III) center in dictating the rate of the dioxygenase reaction.     

Mechanisms of Arsenic Adsorption on Amorphous Oxides Evaluated Using Macroscopic Measurements, Vibrational Spectroscopy, and Surface Complexation Modeling

Arsenic adsorption on amorphous aluminum and iron oxides was investigated as a function of solution pH, solution ionic strength, and redox state. In this study in situ Raman and Fourier transform infrared (FTIR) spectroscopic methods were combined with sorption techniques, electrophoretic mobility measurements, and surface complexation modeling to study the interaction of As(III) and As(V) with amorphous oxide surfaces. The speciation of As(III) and As(V) in aqueous solution was examined using Raman and attenuated total reflectance (ATR)-FTIR methods as a function of solution pH. The position of the As-O stretching bands, for both As(III) and As(V), are strongly pH dependent. Assignment of the observed As-O bands and their shift in position with pH was confirmed using semiempirical molecular orbital calculations. Similar pH-dependent frequency shifts are observed in the vibrational bands of As species sorbed on amorphous Al and Fe oxides. The mechanisms of As sorption to these surfaces based on the spectroscopic, sorption, and electrophoretic mobility measurements are as follows: arsenate forms inner-sphere surface complexes on both amorphous Al and Fe oxide while arsenite forms both inner- and outer-sphere surface complexes on amorphous Fe oxide and outer-sphere surface complexes on amorphous Al oxide. These surface configurations were used to constrain the input parameters of the surface complexation models. Inclusion of microscopic and macroscopic experimental results is a powerful technique that maximizes chemical significance of the modeling approach. Copyright 2001 Academic Press.     

Magnetic, electrochemical and spectroscopic properties of iron(III) amine-bis(phenolate) halide complexes

Eight new iron(III) amine-bis(phenolate) complexes are reported. The reaction of anhydrous FeX(3) salts (where X = Cl or Br) with the diprotonated tripodal tetradentate ligands 2-tetrahydrofurfurylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenol), H(2)L1, 2-tetrahydrofurfurylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol), H(2)L2, and 2-methoxyethylamino-N,N-bis(2-methylene-4,6-di-tert-butylphenol), H(2)L3, 2-methoxyethylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenol), H(2)L4 produces the trigonal bipyramidal iron(III) complexes, L1FeCl (1a), L1FeBr (1b), L2FeCl (2a), L2FeBr (2b), L3FeCl (3a), L3FeBr (3b), L4FeCl (4a), and L4FeBr (4b). All complexes have been characterized using electronic absorption spectroscopy, cyclic voltammetry and room temperature magnetic measurements. Variable temperature magnetic data were acquired for complexes 2b, 3a and 4b. Variable temperature M?ssbauer spectra were obtained for 2b, 3a and 4b. Single crystal X-ray molecular structures have been determined for proligand H(2)L4 and complexes 1b, 2b, and 4b.     

(Pentamethylcyclopentadienyl)(polypyridyl) rhodium and iridium complexes as electrocatalysts for the reduction of protons to dihydrogen and the hydrogenation of organics

The ability of [(η⁵-C₅Me₅)M^III(L)Cl]⁺ complexes (M = Rh and Ir. L = 2,2′-bipyridine and 1, 10-phenanthroline) to act as electrocatalysts for the hydrogenation of unsaturated organic substrates has been examined in homogeneous acetonitrile solution, using formic acid as a proton source, as well as in aqueous electrolytes with electrodes modified by oxidative electropolymerization of pyrrole-substituted Rh(III) and Ir(III) complexes. The hydrogenation process involves the formation of an electrogenerated hydrido complex, followed by the insertion of the substrate in the metal-hydride bond. It appears that rhodium complexes are better catalysts than the iridium ones, and that their immobilization onto an electrode surface decreases their catalytic activity.     

Ternäre Komplexe von Eisen(III) mit Ethylendiamintetraessigsäure und Monophenolderivaten

Ternary Complexes of Iron(III) with Ethylene Diamine Tetraacetic Acid and Derivatives of Monophenols Ternary complexes of iron(III) are investigated with ethylenediamine tetraacetic acid and some monophenols in solution as well as their reactions of formation have been controlled by spectrophotometric and elektrophoretic methods. The ratio of components in the compounds Fe: Y: L is 1: 1: 1 without any exception. The measured optical properties (λ_max' ?_max) of the complexes are discussed.     

Complexes of the proton and its hydrates with carbamoylphosphine oxide in wet dichloroethane solutions

To better understand the complex equilibria involved in the UNEX process for acidic solvent extraction of radionuclides, the interaction of a carbamoylphosphine oxide ligand (L) with the proton of hydrated chlorinated cobalt(III)dicarbollide acid, H[Co(C2B9H8Cl3)2], has been studied in wet 1,2-dichlorethane (DCE) solution using IR and NMR (13C and 31P) spectroscopy. The formation of two groups of complexes has been determined. The first group contains three complexes with 1:1 composition of acid to ligand (Scheme 1). The second group of complexes has 1:2 composition in the equilibrium, shown in Scheme 2. Within each group, the complexes differ in composition only by the number of incorporated water molecules. The equilibria (Schemes 1 and 2) are both very sensitive to the content of self-associated water in solution and are driven by its concentration, which is unsteady and depends on the solution preparation history. The simultaneous presence of both anhydrous (I, II) and hydrated (III, IIIa, IV) proton solvates indicates that the enthalpies of carbamoylphosphine oxide complex formation with H+, H3O+, and H5O2(+) are very close to each other.     

Synthesis and antioxidant, antimicrobial evaluation, DFT studies of novel metal complexes derivate from Schiff base

In Iraq, like most developing countries, attempts are being made to synthesize new compounds with several pharmacological properties. (E)-2-(3-(2-imino-1-methylimidazolidin-4-ylidene)-1-methylguanidino)acetic acid (L) has been synthesized and used as a ligand for the formation of Cr(III), Co(II), Ni(II), and Cu(II) complexes. The chemical structures of synthesized compounds were characterized using different spectroscopic methods. All chelates except Ni(II) chelate are found to be octahedral structures, Ni(II) chelate was square planar. The stability for the prepared complexes was studied theoretically using density function theory. The total energy for the complexes was calculated and it was shown that the copper complex is the most stable one. Ligand and complexes were tested against selected types of microbial organisms and showed significant activities. The free-radical scavenging activity of ligand and metal complexes have been determined by their interaction with the stable free-radical DPPH and all the compounds have shown encouraging antioxidant activities.     

The assembly of rotaxane-like dye/cyclodextrin/surface complexes on aluminium trihydroxide or goethite

Simple azo-dyes carrying phosphonic acid and arsonic acid substituents such as 4-(4-hydroxyphenyl azo)phenylphosphonic acid (5) and 4-(4-hydroxyphenylazo)phenylarsonic acid (6) bind more strongly to high surface area oxides such as aluminium trihydroxide and goethite than their carboxylic and sulfonic acid analogues and the phosphonate-functionalized dyes have been shown to have greater humidity fastness when printed onto commercial alumina-coated papers. Adsorption isotherm measurements provide evidence for the formation of ternary dye/cyclodextrin/surface complexes. Dyes which form such ternary complexes show higher light fastness when printed onto alumina coated papers in an ink formulation containing alpha-cyclodextrin.     

Kojic acid derivatives as powerful chelators for iron(III) and aluminium(III)

Proceeding from a ligand constituted by two units of kojic acid linked by a methylene group, which proved a very promising chelator for excess iron(III) and aluminium(III) pathologies, two new ligands have been designed and synthesized: one by adding a vanillin molecule in the linker and the second by adding an o-vanillin molecule. Both these ligands, on the basis of complex formation studies presented here, show significant potential as therapeutic agents for iron and aluminium overload. Protonation constants of the pure ligands have been determined by potentiometry, and standard reaction heats by calorimetry. Hydrogen bonding plays an important role in the protonation reactions. The crystal structures of both ligands have furthermore been resolved. Complex formation equilibria for the iron complexes have been studied by combined potentiometry-spectrophotometry and those of aluminium by potentiometry alone. All complexes were found to contain two metal ions. NMR diffusion measurements hardly applied to complex formation equilibria and the results of density functional theory (DFT) calculations were powerful tools in confirming the proposed reaction model and in evaluating the relative stabilities of the products. Further support was given by NMR chemical shift measurements and electrospray mass spectrometry.     

Disproportionation of Iron(III) Porphyrin pi-Cation Radicals in the Presence of Sterically Hindered Pyridines. Spectroscopic Detection of Asymmetric Highly Oxidized Intermediates

The reactivity of iron(III) tetraphenylporphyrin pi-cation radical (TPP(*))Fe(III)(ClO(4))(2), (1-1) iron(III) tetra-p-tolylporphyrin pi-cation radical (TTP(*))Fe(III)(ClO(4))(2) (1-2) and iron(III) tetramesitylporphyrin pi-cation radical (TMP(*))Fe(III)(ClO(4))(2) (1-3) complexes with 2,4,6-collidine, 2,3,6-collidine, 2-picoline, 2,6-di-tert-butylpyridine, and 2,6-dibromopyridine has been examined by (1)H NMR spectroscopy in dichloromethane-d(2) solution at low temperatures. These complexes undergo hydration processes which are essential in the generation of highly oxidized species via acid base/equilibria of coordinated water followed by disproportionation pathway, giving as sole stable products [(TPP(*))Fe(III)OFe(III)(TPP)](+) (4-1), [(TTP(*))Fe(III)OFe(III)(TTP)](+) (4-2), and (TMP)Fe(III)(OH) (6) respectively. The sterically hindered pyridines act as efficient proton scavengers. Two novel highly oxidized iron complexes have been detected by (1)H NMR spectroscopy after addition of 2,4,6-collidine to (TTP(*))Fe(III)(ClO(4))(2) or (TPP(*))Fe(III)(ClO(4))(2) in dichloromethane-d(2) solution at 202 K. New intermediates have been identified as iron porphyrin N-oxide complexes, i.e., iron(III) porphyrin N-oxide cation radical (2-n) and iron(IV) porphyrin N-oxide radical (3-n). The (1)H NMR results indicate that the D(4)(h)() symmetry of the parent iron(III) pi-cation radical is drastically reduced upon disproportionation in the presence of proton scavengers. Both species are very unstable and were observed from 176 to 232 K. The intermediate 2-2 has a (1)H NMR spectrum which demonstrates large hyperfine shifts (ppm) for the meso p-tolyl substituents (ortho 98.0, 94.8, 92.9, 91.7; meta -34.8, -38.7, -41.5, -42.3; p-CH(3) -86.3, -88.0) which are consistent with presence of an N-substituted iron porphyrin radical in the product mixture. The characteristic (1)H NMR spectrum of 2-2 includes six pyrrole resonances at 149.6, 118.2, 115.4, 88.3, 64.6, and 55.7 ppm at 202 K, i.e., in the positions corresponding to iron(III) high-spin porphyrins. On warming to 222 K, the pyrrole resonances broaden and then coalesce pairwaise. Such dynamic behavior is accounted for by a rearrangement mechanism which involves an inversion of the porphyrin puckering. The pattern of p-tolyl resonances revealed the cation radical electronic structure of 3-2. The p-tolyl resonances are divided in two distinct sets showing opposite direction of the isotropic shift for the same ring positions. The pyrrole resonances of 3-2 also demonstrated downfield and upfield shifts. A disproportionation mechanism of the hydrated iron porphyrin cation radicals to generate 2 and 3 has been proposed. Both intermediates react with triphenylphosphine to produce triphenylphosphine oxide and high-spin iron porphyrins. Addition of 2,4,6-collidine to (TMP(*))Fe(III)(ClO(4))(2) does not produce analogs of 2 and 3 found for sterically unprotected porphyrins. It results instead in the formation of a variety of X(TMP(*))Fe(IV)O (5) complexes also accounted for by the disproportionation process.     

Novel iron(III) complexes of tripodal and linear tetradentate bis(phenolate) ligands: close relevance to intradiol-cleaving catechol dioxygenases

Four new iron(III) complexes of the bis(phenolate) ligands N,N-dimethyl-N',N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L1)], N,N-dimethyl-N',N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L2)], N,N'-dimethyl-N,N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L3)], and N,N'-dimethyl-N,N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L4)] have been isolated and studied as structural and functional models for the intradiol-cleaving catechol 1,2-dioxygenases (CTD). The complexes [Fe(L1)Cl] (1), [Fe(L2)(H2O)Cl] (2), [Fe(L3)Cl] (3), and [Fe(L4)(H2O)Cl] (4) have been characterized using absorption spectral and electrochemical techniques. The single-crystal X-ray structures of the ligand H2(L1) and the complexes 1 and 2 have been successfully determined. The tripodal ligand H2(L1) containing a N2O2 donor set represents the metal-binding region of the iron proteins. Complex 1 contains an FeN2O2Cl chromophore with a novel trigonal bipyramidal coordination geometry. While two phenolate oxygens and an amine nitrogen constitute the trigonal plane, the other amine nitrogen and chloride ion are located in the axial positions. In contrast, 2 exhibits a rhombically distorted octahedral coordination geometry for the FeN2O3Cl chromophore. Two phenolate oxygen atoms, an amine nitrogen atom, and a water molecule are located on the corners of a square plane with the axial positions being occupied by the other nitrogen atom and chloride ion. The interaction of the complexes with a few monodentate bases and phenolates and differently substituted catechols have been investigated using absorption spectral and electrochemical methods. The effect of substituents on the phenolate rings on the electronic spectral features and FeIII/FeII redox potentials of the complexes are discussed. The interaction of the complexes with catecholate anions reveals changes in the phenolate to iron(III) charge-transfer band and also the appearance of a low-energy catecholate to iron(III) charge-transfer band similar to catechol dioxygenase-substrate complexes. The redox behavior of the 1:1 adducts of the complexes with 3,5-di-tert-butylcatechol (H2DBC) has been also studied. The reactivities of the present complexes with H2DBC have been studied and illustrated. Interestingly, only 2 and 4 catalyze the intradiol-cleavage of H2DBC, the rate of oxygenation being much faster for 4. Also 2, but not 4, yields an extradiol cleavage product. The reactivity of the complexes could be illustrated not on the basis of the Lewis acidity of the complexes alone but by assuming that the product release is the rate-determining phase of the catalytic reaction.     

Iron(II) and Iron(III) Perchlorate Complexes of Ciprofloxacin and Norfloxacin

The reactions of ciprofloxacin (CIP) and norfloxacin (NOR) with iron(II) and iron(III) perchlorate have been investigated. The optical spectra support the formation of four complexes for each oxidation state with 1 : 1, 1 : 2, 1 : 3 and 1 : 4 metal to ligand molar ratios. The electrical conductivity and magnetic susceptibility measurements show that the isolated complexes are high spin and the Fe(ClO 4 ) 2 and Fe(ClO 4 ) 3 complexes behave as 1 : 2 and 1 : 3 electrolytes, respectively. The IR spectra indicate that CIP and NOR bind to the iron ion as bidentate ligands through the carbonyl oxygen atom and one of the oxygen atoms of the carboxylate group.     

Redox-noninnocence of the S,S'-coordinated ligands in bis(benzene-1,2-dithiolato)iron complexes

The electronic structures of complexes of iron containing two S,S'-coordinated benzene-1,2-dithiolate, (L)(2)(-), or 3,5-di-tert-butyl-1,2-benzenedithiolate, (L(Bu))(2)(-), ligands have been elucidated in depth by electronic absorption, infrared, X-band EPR, and Mossbauer spectroscopies. It is conclusively shown that, in contrast to earlier reports, high-valent iron(IV) (d(4), S = 1) is not accessible in this chemistry. Instead, the S,S'-coordinated radical monoanions (L(*))(1)(-) and/or (L(Bu)(*))(1)(-) prevail. Thus, five-coordinate [Fe(L)(2)(PMe(3))] has an electronic structure which is best described as [Fe(III)(L)(L(*))(PMe(3))] where the observed triplet ground state of the molecule is attained via intramolecular, strong antiferromagnetic spin coupling between an intermediate spin ferric ion (S(Fe) = (3)/(2)) and a ligand radical (L(*))(1)(-) (S(rad) = (1)/(2)). The following complexes containing only benzene-1,2-dithiolate(2-) ligands have been synthesized, and their electronic structures have been studied in detail: [NH(C(2)H(5))(3)](2)[Fe(II)(L)(2)] (1), [N(n-Bu)(4)](2)[Fe(III)(2)(L)(4)] (2), [N(n-Bu)(4)](2)[Fe(III)(2)(L(Bu))(4)] (3); [P(CH(3))Ph(3)][Fe(III)(L)(2)(t-Bu-py)] (4) where t-Bu-py is 4-tert-butylpyridine. Complexes containing an Fe(III)(L(*))(L)- or Fe(III)(L(Bu))(L(Bu)(*))- moiety are [N(n-Bu)(4)][Fe(III)(2)(L(Bu))(3)(L(Bu)(*))] (3(ox)()), [Fe(III)(L)(L(*))(t-Bu-py)] (4(ox)()), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))] (7), [Fe(III)(L(Bu))(L(Bu)(*))(PMe(3))(2)] (8), and [Fe(III)(L(Bu))(L(Bu)(*))(PPr(3))] (9), where Pr represents the n-propyl substituent. Complexes 2, 3(ox)(), 4, [Fe(III)(L)(L(*))(PMe(3))(2)] (6), and 9 have been structurally characterized by X-ray crystallography.     

Adsorption of poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) polymers on zinc, zinc oxide, iron, and iron oxide surfaces

The adsorption of poly(vinyl formamide) (PVFA) and the statistic copolymers poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) onto zinc and iron metal particles as well as their oxides was investigated. The adsorbates were characterized by means of XPS, DRIFT spectroscopy, wet chemical analysis, and solvatochromic probes. Dicyano-bis-(1,10-phenanthroline)-iron(II) (1), 3-(4-amino-3-methylphenyl)-7-phenyl-benzo-[1,2-b:4,5-b']difuran-2,6-dione (2), and 4-tert-butyl-2-(dicyano-methylene)-5-[4-(diethylamino)-benzylidene]-Δ(3)-thiazoline (3) as solvatochromic probes were coadsorbed onto zinc oxide to measure various effects of surface polarity. The experimental findings showed that the adsorption mechanism of PVFA and PVFA-co-PVAm strongly depends on the degree of hydrolysis of PVFA and pH values and also on the kind of metal or metal oxide surfaces that were employed as adsorbents. The adsorption mechanism of PVFA/PVFA-co-PVAm onto zinc oxide and iron oxide surfaces is mainly affected by electrostatic interactions. Particularly in the region of pH 5, the adsorption of PVFA/PVFA-co-PVAm onto zinc and iron metal particles is additionally influenced by redox processes, dissolution, and complexation reactions.     

Interactions of benzoic acid and phosphates with iron oxide colloids using chemical force titration

Colloidal iron oxides are an important component in soil systems and in water treatment processes. Humic-based organic compounds, containing both phenol and benzoate functional groups, are often present in these systems and compete strongly with phosphate species for binding sites on the iron oxide surfaces. Here, we examine the interaction of benzoate and phenolic groups with various iron oxide colloids using atomic force microscopy (AFM) chemical force titration measurements. Self-assembled monolayers (SAMs) of 4-(12-mercaptododecyloxy)benzoic acid and 4-(12-mercaptododecyloxy)phenol were used to prepare chemically modified Au-coated AFM tips, and these were used to probe the surface chemistry of a series of iron oxide colloids. The SAMs formed were also characterized using scanning tunneling microscopy, reflection-absorption infrared spectroscopy, and X-ray photoelectron spectroscopy. The surface pK(a) of 4-(12- mercaptododecyloxy)benzoic acid has been determined to be 4.0 +/- 0.5, and the interaction between the tip and the sample coated with a SAM of this species is dominated by hydrogen bonding. The chemical force titraton profile for an AFM probe coated with 4-(12- mercaptododecyloxy)benzoic acid and a bare iron oxide colloid demonstrates that the benzoic acid function group interacts with all three types of iron oxide sites present on the colloid surface over a wide pH range. Similar experiments were carried out on colloids precipitated in the presence of phosphoric, gallic, and tannic acids. The results are discussed in the context of the competitive binding interactions of solution species present in soils or in water treatment processes.