Enantiomer separation of N-protected amino acids by non-aqueous capillary electrophoresis and high-performance liquid chromatography with tert.-butyl carbamoylated quinine in either the background electrolyte or the stationary phase

A non-aqueous CE method was developed for evaluating the chiral discrimination potential of cinchona alkaloids and different kinds of carbamoylated derivatives of quinine and quinidine type chiral selectors towards acidic analytes, in particular a series of various Bz (benzoyl), DNB (3,5-dinitrobenzoyl) and DNZ (3,5-dinitrobenzyloxycarbonyl) amino acid derivatives. In this study, the enantioselectivity values obtained in non-aqueous CE with tert.-butyl carbamoylated quinine as chiral additive have been compared with the values found for the same series of selectands in HPLC using the same selector immobilized onto silica as chiral stationary phase. Similarly to the background electrolyte used in CE an ethanol-methanol mixture (60:40, v/v) containing 100 mM octanoic acid and 12.5 mM ammonia has been selected as HPLC mobile phase. Under these conditions, a good correlation (r = 0.954) between the enantioselectivities observed with the two techniques has been obtained. Thus the non-aqueous CE method can be applied as a screening tool for the rapid evaluation of the chiral discrimination potential of a large set of newly developed chiral selectors derived from quinine and related alkaloids.     

Enantiomeric separation of hydroxy acids and carboxylic acids by diamino-beta-cyclodextrins (AB,AC,AD) in capillary electrophoresis

Selectively modified 6,6'-dideoxy-6,6'-L-diamino-beta-cyclodextrins (AB, AC, AD) were successfully used as chiral selectors for the enantiomeric separation of hydroxy acids and carboxylic acids (in particular, phenoxyalkanoic acid herbicides) in capillary electrophoresis (CE). Chiral separations were obtained at a low selector concentration (1 mM) with good enantioselectivity and resolution factors. Separations were optimized as a function of pH. The different position of the charged groups on the upper rim greatly influenced the separation, accounting for electrostatic interactions between the protonated amino groups of the cyclodextrins (CDs) and the carboxylate of the selectands. The best enantiomeric separation of hydroxy acids was obtained with the AC regioisomer, whereas carboxylic acids were well resolved only by the AB regioisomer. A recognition model is proposed, based on two-dimensional nuclear magnetic resonance (2-D NMR) experiments, in which the orientation of the guest in the inclusion complex is determined by the electrostatic interactions between the selectand and the CD upper rim.     

Extension of chromatographically derived chiral recognition systems to chiral recognition and enantiomer analysis by electrospray ionization mass spectrometry

Chiral recognition by positive ion electrospray ionization (ESI) mass spectrometry is demonstrated through the adaptation of chromatographically derived chiral recognition systems. Solutions of soluble analogues of chiral selectors used in Pirkle-type chiral stationary phases, when mixed with a chiral analyte, whose enantiomers are known to be resolved on the analogous chiral stationary phase, are shown to afford selector–analyte complexes in the mass spectrum. Pseudo-enantiomeric chiral selectors, where each pseudo-enantiomer has a different mass and a higher affinity for the opposite analyte enantiomer of its pseudo-antipode, were prepared. When mixed with a chiral analyte, solutions of these pseudo-enantiomeric selectors afford selector–analyte complexes in the ESI-mass spectrum where the relative intensities of the selector–analyte complexes are dependent on the enantiomeric composition of the analyte. Additionally, the sense of the observed chiral recognition is in agreement with the sense of chiral recognition observed chromatographically.     

Development of stereoselective nonaqueous capillary electrophoresis system for the resolution of cationic and amphoteric analytes

A stereoselective ion-pair nonaqueous capillary electrophoresis (NACE) method employing the partial filling technique with N-derivatized amino acids, e.g., (R)- and (S)-3,5-dinitrobenzoyl-leucine (DNB-Leu), as chiral selector for the separation of "pseudoenantiomeric" cinchona alkaloid derivatives and other structurally related basic compounds like the enantiomers of mefloquine is presented. Originating from NACE with cinchona alkaloid derivatives as chiral counterions, this method was developed by application of the reciprocity principle of chiral recognition, which was proven to be valid for stereoselective ion-pair capillary electrophoresis (CE). A variety of basic and amphoteric selectands (SAs) could be well resolved. Thereby, the separation was primarily based on stereoselective ion-pair formation of corresponding SA stereoisomers and mobility differences of free and complexed (ion-paired) SAs. Additionally, in the case of diastereomeric SAs, naturally existing mobility differences between the diastereomers played also a role, but was shown by control experiments with racemic DNB-Leu and without selector (SO) to be of minor contribution to overall separation selectivity. Due to its simplicity, speed, and good reproducibility, the established method can be utilized for fast screening of cationic as well as amphoteric chiral compounds, and therefore is a valuable tool in the development of new chiral selectors and chiral stationary phases. Small sample amounts of the SO (4-5 mg) and only analytical amounts of SAs are needed, and about 20-50 compounds per day can be tested.     

Recent innovations in enantiomer separation by electrochromatography utilizing modified cyclodextrins as stationary phases.

Enantiomer separation by electrochromatography employing modified cyclodextrins as stationary phases is performed in two ways. (i) Polysiloxane-linked permethylated beta-cyclodextrin (Chirasil-Dex 1) or related selectors are coated and immobilized onto the inner surface of a capillary column. Enantiomer separation is performed in the open tube and the method is referred to as open-tubular capillary electrochromatography (o-CEC). (ii) Silica-linked native beta-cyclodextrin, permethylated beta-cyclodextrin (Chira-Dex 2) or hydroxypropyl-beta-cyclodextrin are filled into a capillary column and the bed is secured by two frits. Enantiomer separation is performed in a packed column and the method is referred to as packed capillary electrochromatography (p-CEC). In a unified instrumental approach, method (i) as well as method (ii) can be operated both in the electro- and pressure-driven modes (o-CEC vs. open-tubular liquid chromatography (o-LC) and p-CEC vs. p-LC). It is demonstrated that the electro-driven variant affords higher efficiencies at comparable elution times. Employing a single open-tubular column coated with Chirasil-Dex 1, a unified enantioselective approach can be realized in which the same selectand is separated using all existing chromatographic modes for enantiomers, i.e., gas chromatography (GC), super-critical fluid chromatography (SFC), o-LC and o-CEC. As the chiral selector is utilized as a stationary phase, an additional chiral selector may be added to the mobile phase. In the resulting dual chiral recognition systems, enhancement of enantioselectivity (matched case) or compensation of enantioselectivity (mismatched case) may be observed. The overall enantioselectivity is dependent on the sense of enantioselectivity of the selectors chosen and their influence on the electrophoretic and electroosmotic migration of the enantiomers of a selectand.     

Dependence of chiral separations on the amount of cyclodextrins as selectors, employing the partial filling technique in capillary zone electrophoresis

Summary The enantioselectivity, resolution factor and migration times for some local anaesthetic drugs were evaluated at different selector concentrations and plug lengths with different cyclodextrins as chiral selectors using the partial filling technique. The resolution remained constant when equal amounts of the chiral selector at a concentration below the optimal concentration were introduced in the capillary. However, the selectivity factor increased with increasing concentration of the chiral selector.     

Enantiomeric separation of chiral peptide nucleic acid monomers by capillary electrophoresis with charged cyclodextrins

Direct chiral separation of chiral peptide nucleic acid (PNA) monomers has been achieved for the first time by capillary electrophoresis (CE) with charged cyclodextrins as chiral selectors added to the electrophoretic buffer. Selectively modified 6-deoxy-6-N-histamino-beta-cyclodextrin and sulfobutyl ether-beta-CD were successfully used as chiral selectors for the enantiomeric separation of chiral monomers based on different aminoethylamino acids bearing thymine or adenine as nucleobases. Chiral separations were obtained at low selector concentrations (1-3 mM) with good enantioselectivity and resolution factors. Separations were optimized as a function of pH in order to exploit the effect of the electrostatic interactions between the oppositely charged selector and selectand. The method has been applied to the analysis of the enantiomeric excess of chiral monomers used for the solid phase synthesis of chiral PNA oligomers. CE chiral analysis showed that a very high enantiomeric purity was generally achieved in the synthesis of all monomers, except for histidine and aspartic acid based monomers in which ca. 10% of the "wrong" enantiomer was always present.     

Development of Electrophoretic Methods for Simultaneous Determination of Enantiomeric Ratio and Composition of Diastereomeric Salt Mixtures

Obtaining enantiomeric pure compounds is—among other techniques—possible in a resolvation experiment via diastereomeric salt formation, excellently exemplified by a modified Pope–Peachy method performed in supercritical carbon dioxide as solvent. The salt precipitation is followed by supercritical fluid extraction (SFE) to separate the diastereomeric salts and the unreacted enantiomers. To evaluate the extraction efficiency, conversion and enantioselectivity achieved, it is essential to determine the enantiomer excess and the residual resolving agent content in extracts and raffinates. Carefully chosen experimental parameters enable the simultaneous determination of certain anions and cations in capillary electrophoresis in a single run, which has not been reported for diastereomeric mixtures so far. In this paper, a partially validated chiral selective cyclodextrin enabled capillary electrophoresis method is presented for the characterization of cis-permethrinic acid samples resolved with (R)-1-phenylethylamine prepared by the SFE-based resolvation technique. To evaluate the efficiency of the resolvation, a cyclodextrin enabled chiral separation method was developed applying permethylated-β-cyclodextrin as chiral selector. The theoretical possibility of the widespread application of the developed method (with minor adjustments) is justified for other selectands and selectors. The developed methods can be thereby applied for the fast and reliable control of resolvation experiments.     

Chiral recognition: design and preparation of chiral stationary phases using selectors derived from ugi multicomponent condensation reactions and a combinatorial approach

Combinatorial approaches together with high-throughput screening have been used to develop highly selective stationary phases for chiral recognition. Libraries of potential chiral selectors have been prepared by the Ugi multicomponent condensation reactions and screened for their enantioselectivity using the reciprocal approach involving a chiral stationary phase with immobilized model target compound N-(3,5-dinitrobenzoyl)-alpha-l-leucine. The best candidates were identified from the library of phenyl amides of 2-oxo-azetidineacetic acid derivatives. This screening also enabled specification of the functionalities of the selector desired to achieve the highest level of chiral recognition. The substituents of the phenyl ring adjacent to the chiral center of the selector candidates exhibited the most profound effect on the chiral recognition. The best candidate was then synthesized on a larger scale, resolved into single enantiomers using preparative enantioselective HPLC, and attached to porous poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) beads via an ester linkage to afford the desired stationary phase. Selectivities alpha as high as 3.2 were found for the separation of a variety of amino acid derivatives.     

Extraction of Phenylalanine Enantiomers by Aqueous Two Phase Systems Containing Combinatorial Chiral Selector

In order to obtain a better enantioselectivity of phenylalanine enantiomers and establish the optimal chiral extraction conditions, the distribution behavior was investigated in aqueous two‐phase systems which were composed of polyethylene glycol and ammonium sulfate containing combinatorial chiral selector: β‐cyclodextrin and HP‐β‐cyclodextrin. The influence of the molar concentration ratio of combinatorial chiral selectors, the total molar concentration of combinatorial chiral selectors, pH value, buffer type and its concentration were thoroughly studied, respectively. The results show that the enantioselectivity reaches 1.53 under the optimal chiral extraction conditions. This extraction is a potential economical and effective way for chiral resolution.     

Non-aqueous capillary electrophoretic enantioseparation of N-derivatized amino acids using cinchona alkaloids and derivatives as chiral counter-ions

A non-aqueous capillary electrophoretic method developed with quinine and tert.-butyl carbamoylated quinine as chiral selectors for the enantioseparation of N-protected amino acids was applied to the investigation of other quinine derivatives as chiral additives. The optimum composition of the background electrolyte was found to be 12.5 mM ammonia, 100 mM octanoic acid and 10 mM chiral selector in an ethanol-methanol (60:40, v/v) mixture. Under these conditions, a series of chiral acids, as various benzoyl, 3,5-dinitrobenzoyl and 3,5-dinitrobenzyloxycarbonyl amino acid derivatives were investigated with regards to selectand-selector relationships and enantioselectivity employing quinine, quinidine, cinchonine, cinchonidine, tert.-butyl carbamoylated quinine, tert.-butyl carbamoylated quinidine, dinitrophenyl carbamoylated quinine and cyclohexyl carbamoylated quinine as chiral selector.     

Liquid chromatographic enantiomer separations of novel quinazolone derivatives on quinine carbamate based chiral stationary phases using hydro-organic mobile phases

Quinine carbamate-type weak chiral anion-exchange selectors (SOs) and the respective chiral stationary phases (CSPs) have been used for the direct liquid chromatographic enantiomer separation of a wide range of chiral acids. In the present work, we demonstrate that these CSPs can also be extended to chiral discrimination of a set of neutral polar potential NMDA (N-methyl-D-aspartic acid) and/or AMPA (alpha-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid) antagonist imidazo-quinazoline-dione derivatives (selectands, SAs) using acetonitrile and methanol containing hydro-organic and buffered mobile phases. The influence of mobile phase composition, column temperature and structure variation of the SAs and SOs on retention and enantioselectivity was systematically investigated to gain insight into the overall chiral recognition mechanism. As was expected for the reversed-phase mode, acetonitrile has a stronger eluotropic effect compared to methanol. Except for two analytes, the acetonitrile containing mobile phases provided baseline resolution (R(S)) of the enantiomers with R(S) values ranging between 1.68 and 2.76. Using methanol as the organic modifier enhanced the enantioselectivity. The enthalpic and entropic terms for the SO-SA association were calculated from the linear van't Hoff plots. Data reveal that the enantiomer separations are predominantly enthalpically driven.     

Structure‐enantioselectivity relationships for the study of chiral recognition in peptide enantiomer separation on cinchona alkaloid‐based chiral stationary phases by HPLC: Influence of the N‐terminal protecting group

Eleven different N‐terminal protecting groups (acetyl, benzoyl, FMOC, etc.) were employed for the HPLC separation of oligoalanine peptide enantiomers containing up to six amino acids. Isocratic HPLC separations were performed using a hydro‐organic buffered mobile phase and 4 mm ID columns containing three different chiral anion exchange stationary phases based on cinchona alkaloid‐derived chiral selectors. For most peptides successful separations could be obtained with all protecting groups, although those comprising aromatic moieties were found to yield higher enantioselectivities than those with aliphatic residues, since they are capable of undergoing favourable π‐π interactions with the selector. Systematic investigations concerning the presence or absence of structural features of related protecting groups showed that the use of protecting groups that are optimally adjusted to the binding pocket of the chiral selector effects a significant gain in enantioselectivity. At the same time these studies provided new insights into the chiral recognition mechanism.     

Immobilized penicillin G acylase as reactor and chiral selector in liquid chromatography

In this paper, the use of penicillin G acylase (PGA) as a biocatalyst and as a chiral selector is described. Penicillin G-acylase is an interesting enzyme used in the manufacture of semisynthetic antibiotics and, in particular, in the production of 6-APA by hydrolysis of penicillin G. Five PGA-based HPLC columns have been prepared by using two different silica supports by employing two immobilization methods, namely "in situ" and "in batch". The effects of the immobilization techniques and of different silica pore size on the catalytic properties of the enzyme as well as the applicability of the PGA-bonded stationary phases as chiral selectors for a number of chiral drugs have been investigated. The HPLC columns based on immobilized PGA combine the hydrolytic activity and the chiral recognition properties of PGA, therefore they have been used for the development of a combined reaction-separation system for chiral and achiral substrates.     

Effect of the presence of a free hydroxyl group on the enantiodiscrimination properties of cholic acid based CSPs bearing 2-naphthylcarbamate and 3,5-dinitrophenylcarbamate moieties in the HPLC resolution of racemic compounds

Two new chiral selectors, obtained by derivatizing two of the three hydroxyl groups of cholic acid with 2-naphthylisocyanate and 3,5-dinitrophenylisocyanate, have been prepared and linked to silica gel to obtain chiral stationary phases (CSPs) for the HPLC separation of enantiomers. The enantiodiscriminating capability of the two CSPs has been compared to that of the analogous CSP obtained from an exhaustively derivatized cholic acid based selector, in order to establish the effect of the presence of a free hydroxyl group on the enantiodiscrimination properties of this kind of selector. The chromatographic results demonstrate that the enantioselectivity of these selectors strongly depends on the position of the hydroxyl group on the cholestanic backbone.     

New amphiphilic aminosaccharide derivatives as chiral selectors in capillary electrophoresis

Two amphiphilic aminosaccharide derivatives were investigated as chiral selector additives in capillary electrophoresis. Each substance has a glucosamine backbone carrying three hydrocarbon chains as the hydrophobic region and three carboxylic groups as the hydrophilic region, which is an artificial biologically active compound. Using each compound as a chiral selector, the optical resolution of dansylated amino acids or new quinolone antibacterial agents (NQs) was observed. Increasing the concentration of the chiral selector or the ionic strength of running solution led to successful optical resolution. In consideration of the chemical structure of each selector and the migration behavior of the enantiomers, the resolution seemed to be based on micellar electrokinetic chromatography mode. Both selectors differed in their enantioselectivity for dansylated amino acids or NQs although the chemical structures were similar.     

Enantioseparation of chiral sulfoxides and sulfinate esters by capillary electrophoresis

Forty-one chiral sulfoxides and sulfinate esters were separated using sulfated beta-cyclodextrin and carboxymethyl beta-cyclodextrin as chiral selectors. Binding constants of some analytes to both chiral selectors were measured in order to examine and help explain the observed migration behavior and enantioselectivity trends. Overall, sulfated beta-cyclodextrin separated a greater number of compounds, and had better separating capabilities than did carboxymethyl beta-cyclodextrin for these analytes. This was true even though all of the analytes showed much stronger binding to carboxymethyl beta-cyclodextrin than to sulfated beta-cyclodextrin. General procedures to optimize the separation, by varying pH, selector concentration, and organic modifier concentration were examined and discussed. Chiral selector concentration had the greatest effect on enantioseparation, with higher concentrations of selector giving better peak-to-peak separations. Organic modifier had an adverse affect on resolution, with increasing amounts giving lower mobility differences. Lastly, pH had only a minimal effect on separation.     

Enantioselective liquid-solid extraction for screening of structurally related chiral stationary phases

Summary An enantioselective liquid-solid batch extraction method is described for the screening of novel chiral stationary phases (CSPs) during optimization studies of chiral selectors derived form a common lead structure. Extraction enantioselectivity (α) values can be calculated from the enantiomeric excess ee-values of the selectand, which are measured in the liquid phase by enantioselective HPLC. Extraction α-values have been correlated with chromatographic α-values. The influence was studied of several experimental parameters of the assay (pH_a, buffer concentration, temperature, selector/selectand and phase ratio) on the enantiomeric excess (ee) values of the selectands and the enantioselectivity of the CSPs, respectively. The derived statistically significant model has then been implemented to predict chromatographic α-values of novel CSPs. For example, an ee of 89.3% for DNB-Leu as selectand could be achieved in batch extraction for a novel synthesized but mechanistically similarly-acting CSP derived form quinine. This corresponds to a calculated extraction α-value of 17.7. Based on this α_extraction a chromatographic α-value of 28.8 was predicted by the linear correlation model; the experimental HPLC α-value of 31.7 was in good agreement and demonstrated the validity of the proposed screening method. The method is particularly helpful in SO optimization studies.     

Chiral separation of basic drugs by capillary electrophoresis with carboxymethylcyclodextrins

Capillary electrophoresis (CE) with carboxymethylated beta- or gamma-cyclodextrins was used to achieve the rapid enantiomeric separation of a set of basic drugs. The enantiomers of 12 chiral amino-containing pharmaceutical compounds belonging to various therapeutic categories were analyzed by CE using an uncoated 60 cm x 75 microm I.D. silica capillary. Several experimental parameters such as the nature, concentration and pH of the buffer, nature and concentration of the anionic cyclodextrin and temperature were studied in order to optimize the enantiomeric separation. The variation of the solute partition coefficient for the chiral selector, the enantioselectivity and resolution factors are used to assess the quality of the chiral separation. It is shown that the solute affinity for the chiral selector is not related to its enantioresolution factor. None of the two cyclodextrin selectors used was able to separate the whole set of basic drugs.     

Development of Electrophoretic Methods for Simultaneous Determination of Enantiomeric Ratio and Composition of Diastereomeric Salt Mixtures

Obtaining enantiomeric pure compounds is—among other techniques—possible in a resolvation experiment via diastereomeric salt formation, excellently exemplified by a modified Pope–Peachy method performed in supercritical carbon dioxide as solvent. The salt precipitation is followed by supercritical fluid extraction (SFE) to separate the diastereomeric salts and the unreacted enantiomers. To evaluate the extraction efficiency, conversion and enantioselectivity achieved, it is essential to determine the enantiomer excess and the residual resolving agent content in extracts and raffinates. Carefully chosen experimental parameters enable the simultaneous determination of certain anions and cations in capillary electrophoresis in a single run, which has not been reported for diastereomeric mixtures so far. In this paper, a partially validated chiral selective cyclodextrin enabled capillary electrophoresis method is presented for the characterization of cis-permethrinic acid samples resolved with (R)-1-phenylethylamine prepared by the SFE-based resolvation technique. To evaluate the efficiency of the resolvation, a cyclodextrin enabled chiral separation method was developed applying permethylated-β-cyclodextrin as chiral selector. The theoretical possibility of the widespread application of the developed method (with minor adjustments) is justified for other selectands and selectors. The developed methods can be thereby applied for the fast and reliable control of resolvation experiments.