Monolayer assemblies of a de novo designed 4-alpha-helix bundle carboprotein and its sulfur anchor fragment on Au(111) surfaces addressed by voltammetry and in situ scanning tunneling microscopy

Mapping and control of proteins and oligonucleotides on metallic and nonmetallic surfaces are important in many respects. Electrochemical techniques based on single-crystal electrodes and scanning probe microscopies directly in aqueous solution (in situ SPM) have recently opened perspectives for such mapping at a resolution that approaches the single-molecule level. De novo design of model proteins has evolved in parallel and holds promise for testing and controlling protein folding and for new tailored protein structural motifs. In this report we combine these two strategies. We present a scheme for the synthesis of a new 4-alpha-helix bundle carboprotein built on a galactopyranoside derivative with a thiol anchor aglycon suitable for surface immobilization on gold. The carboprotein with thiol anchor in monomeric and dimeric (disulfide) form, the thiol anchor alone, and a sulfur-free 4-alpha-helix bundle carboprotein without thiol anchor have been prepared and investigated for comparison. Cyclic and differential pulse voltammetry (DPV) of the proteins show desorption peaks around -750 mV (SCE), whereas the thiol anchor desorption peak is at -685 mV. The peaks are by far the highest for thiol monomeric 4-alpha-helix bundle carboprotein and the thiol anchor. This pattern is supported by capacitance data. The DPV and capacitance data for the thiolated 4-alpha-helix bundle carboproteins and the thiol anchor hold a strong Faradaic reductive desorption component as supported by X-ray photoelectron spectroscopy. The desorption peak of the sulfur-free 4-alpha-helix bundle carboprotein, however, also points to a capacitive component. In situ scanning tunneling microscopy (in situ STM) of the thiol anchor discloses an adlayer with small domains and single molecules ordered in pin-striped supramolecular structures. In situ STM of thiolated 4-alpha-helix bundle carboprotein monomer shows a dense monolayer in a broad potential range on the positive side of the desorption potential. The coverage decreases close to this potential and single-molecule structures become apparent. The in situ STM contrast is also strengthened, indicative of a new redox-based tunneling mechanism. The data overall suggest that single-molecule mapping of natural and synthetic proteins on well-characterized surfaces by electrochemistry and in situ STM is within reach.     

Hierarchical self-assembly of designed 2 x 2-alpha-helix bundle proteins on Au(111) surfaces

Self-assembled monolayers of biomolecules on atomically planar surfaces offer the prospect of complex combinations of controlled properties, e.g., for bioelectronics. We have prepared a novel hemi-4-alpha-helix bundle protein by attaching two alpha-helical peptides to a cyclo-dithiothreitol (cyclo-DTT) template. The protein was de novo designed to self-assemble in solution to form a 4-alpha-helix bundle, whereas the disulfide moiety enables the formation of a self-assembled monolayer on a Au(111) surface by opening of the disulfide, thus giving rise to a two-step self-assembly process. The 2 x 2-alpha-helix bundle protein and its template were studied by X-ray photo electron spectroscopy (XPS), electrochemical methods, and electrochemical in situ scanning tunneling microscopy (in situ STM). XPS showed that the cyclo-DTT opens on adsorption to a gold surface with the integrity of the 2 x 2-alpha-helix bundle proteins retained. The surface properties of the DTT and 2 x 2-alpha-helix bundle protein adlayer were characterized by interfacial capacitance and impedance techniques. Reductive desorption was used to determine the coverage of the adlayers, giving values of 65 and 16 muC cm(-2) for DTT and 2 x 2-helix, respectively. The 2 x 2-alpha-helix bundle protein adlayers were imaged by in situ STM. The images indicated a dense monolayer according with the voltammetric data. No long-range order could be detected, but two clearly distinct STM contrasts were assigned to 2 x 2-alpha-helix bundle protein molecules oriented in parallel and antiparallel conformations. The template molecule DTT alone forms highly ordered 30-40 nm domains, giving an adlayer density which agreed well with the coverage determined by voltammetry. This could be exploited in STM imaging of mixed DTT/2 x 2-alpha-helix bundle protein monolayers, with clearly distinct STM patterns of the two components.     

Monosaccharide templates for de novo designed 4-alpha-helix bundle proteins: template effects in carboproteins

De novo design and total chemical synthesis of proteins provide powerful approaches to critically test our understanding of protein folding, structure, and stability. The 4-alpha-helix bundle is a frequently studied structure in which four amphiphilic alpha-helical peptide strands form a hydrophobic core. Assembly of protein models on a template has been suggested as a way to reduce the entropy of folding. We have previously developed the concept of carbohydrates as templates in the de novo design of protein models termed 'carboproteins'. Here we present the chemical synthesis of three 8.1 kDa 4-alpha-helix bundles by oxime ligation of tetra-aminooxyacetyl functionalized D-galacto-, D-gluco-, and D-altropyranoside templates with an amphiphilic C-terminal hexadecapeptide aldehyde sequence. CD spectroscopy indicated that the choice of template has an effect on the overall structure of the carboprotein, as the altro-based carboprotein was found to be more alpha-helical than the corresponding galacto- and gluco-carboproteins. However, an influence on stability could not be detected in the present experiments, as the three carboproteins gave similar free energy of foldings (deltaG(F)H2O) and melting points in chemical and thermal denaturation experiments.     

Voltammetry and in situ scanning tunnelling microscopy of de novo designed heme protein monolayers on Au(111)-electrode surfaces

In the present work, we report the electrochemical characterization and in situ scanning tunnelling microscopy (STM) studies of monolayers of an artificial de novo designed heme protein MOP-C, covalently immobilized on modified Au(111) surfaces. The protein forms closely packed monolayers, which remain electroactive upon immobilization. In situ STM images show circular structures indicating that MOP-C stands upright on the surface in accordance with the molecular design. Despite the large spatial extension of MOP-C, about 5 nm in height, conditions could be found where tip/sample interaction is minimal and proteins could be imaged without detectable tip interference. The results indicate further that the structural sensitivity of (in situ) STM depends to a significant extent on associated electron transfer kinetics. In the present case, the heme group does not contribute significantly to the tunnelling current, apparently due to slow electron transfer kinetics. As a consequence, STM images of heme-containing and heme-free MOP-C did not reveal any notable differences in apparent height or physical extension. The apparent height of heme-containing MOP-C did not show any dependence on the substrate potential being varied around the redox potential of the protein. The mere presence of an accessible molecular energy level is not sufficient to result in detectable tunnelling current modulation.     

Self-Assembled Monolayers of N-Heterocyclic Olefins on Au(111)

Self-assembled monolayers (SAMs) of N-heterocyclic olefins (NHOs) have been prepared on Au(111) and their thermal stability, adsorption geometry, and molecular order were characterized by X-ray photoelectron spectroscopy, polarized X-ray absorption spectroscopy, scanning tunneling microscopy (STM), and density functional theory (DFT) calculations. The strong σ-bond character of NHO anchoring to Au induced high geometrical flexibility that enabled a flat-lying adsorption geometry via coordination to a gold adatom. The flat-lying adsorption geometry was utilized to further increase the surface interaction of the NHO monolayer by backbone functionalization with methyl groups that induced high thermal stability and a large impact on work-function values, which outperformed that of N-heterocyclic carbenes. STM measurements, supported by DFT modeling, identified that the NHOs were self-assembled in dimers, trimers, and tetramers constructed of two, three, and four complexes of NHO−Au-adatom. This self-assembly pattern was correlated to strong NHO−Au interactions and steric hindrance between adsorbates, demonstrating the crucial influence of the carbon-metal σ-bond on monolayer properties.     

Organized Monolayers of Biological Macromolecules on Au(111) Surfaces

Single-crystal electrochemistry and scanning tunneling microscopy directly in aqueous electrolyte solution (in situ STM) are established in physical electrochemistry but new in studies of adsorption and interfacial electrochemistry of biological macromolecules. These high-resolution techniques have now been applied comprehensively to proteins and other biomolecules in recent studies, discussed in this report. Focus is on three systems. The first one is a pair of amino acids, cysteine and cystine. These are strongly adsorbed via thiolate and disulfide, respectively, with identical reductive desorption and in situ STM patterns. Long-range lateral order can be imaged to molecular resolution. The amino acids are also reference molecules for the blue single-copper protein Pseudomonas aeruginosa azurin. This protein assembles in two well-defined orientations. One applies on bare Au(111) to which the protein is linked via its surface disulfide group. This orients the copper center away from the electrode surface. The other mode is by hydrophobic interactions with variable-length alkanethiols self-assembled on Au(111). In this mode the copper center is directed towards the surface. Adsorption and long-range electron tunneling in both modes have been characterized in detail using different electrochemical and spectroscopic techniques, as well as STM. Other data show that penta-(A–T) oligonucleotide adsorbed via a covalently bound thiol linker also displays reductive desorption and in situ STM to molecular resolution. The three systems thus appear to open new perspectives for broader use of high-resolution electrochemical techniques in comprehensive investigations of large biological molecules.     

电势诱导的N-异丁酰基-L-半胱氨酸分子在金(111)表面的相转变

Functional solid substrates modified by self-assembled monolayers (SAMs) have potential applications in biosensors, chromatography, and biocompatible materials. The potential-induced phase transition of N-isobutyryl-L-cysteine (L-NIBC) SAMs on Au (111) surfaces was investigated by in-situ electrochemical scanning tunneling microscopy (EC-STM) in 0.1 mol·L^-1 H₂SO₄ solution. The NIBC SAMs with two distinct structures (α phase and β phase) can be prepared by immersing the Au (111) substrate in pure NIBC aqueous solution and NIBC solution controlled by phosphate buffer at pH 7, respectively. The as-prepared α phase and β phase of NIBC SAMs show various structural changes under the control of electrochemical potentials of the Au (111) in H₂SO₄ solution. The α phase NIBC SAMs exhibit structural changes from ordered to disordered structures with potential changes from 0.7 V (vs saturated calomel electrode, SCE) to 0.2 V. However, the β phase NIBC SAMs undergo structural changes from disordered structures (E < 0.3 V) to γ phase (0.4 V < E < 0.5 V) and finally to the β phase (0.5 V < E < 0.7 V). EC-STM images also indicate that the phase transition from the β phase NIBC SAMs to the α phase occurs at positive potential. Combined with density functional theory (DFT) calculations, the phase transition from the β phase to the α phase is explained by the potential-induced break of bonding interactions between ——COO^- and the negatively charged gold surfaces.     

Improving the Switching Capacity of Glyco-Self-Assembled Monolayers on Au(111)

Self-assembled monolayers (SAMs) decorated with photoisomerizable azobenzene glycosides are useful tools for investigating the effect of ligand orientation on carbohydrate recognition. However, photoswitching of SAMs between two specific states is characterized by a limited capacity. The goal of this study is the improvement of photoswitchable azobenzene glyco-SAMs. Different concepts, in particular self-dilution and rigid biaryl backbones, have been investigated. The required SH-functionalized azobenzene glycoconjugates were synthesized through a modular approach, and the respective glyco-SAMs were fabricated on Au(111). Their photoswitching properties have been extensively investigated by applying a powerful set of methods (IRRAS, XPS, and NEXAFS). Indeed, the combination of tailor-made biaryl-azobenzene glycosides and suitable diluent molecules led to photoswitchable glyco-SAMs with a significantly enhanced and unprecedented switching capacity.     

Au单晶表面氟表面活性剂FSN自组装膜的电化学行为

研究Au(111)和Au(100)表面非离子型氟表面活性剂FSN自组装膜的电化学行为.电化学扫描隧道显微术和循环伏安法测试表明,在0～0.8 V电位区间,FSN自组装膜未发生氧化还原,均一性好,可稳定地存在于电极表面,并显著抑制硫酸根离子在电极表面的吸附和Au单晶表面的重构.在FSN自组装膜Au单晶电极的初始氧化阶段,Au(111)表面有少量突起,而Au(100)表面呈现台阶剧烈变化,但FSN自组装膜的吸附结构没有改变.与Au(100)表面相比,Au(111)表面形成的FSN自组装膜可更有效地抑制Au表面的氧化.     

Chiral structures of 6,12-dibromochrysene on Au(111) and Cu(111) surfaces

Nanoscale low-dimensional chiral architectures are increasingly receiving scientific interest, because of their potential applications in many fields such as chiral recognition, separation and transformation. Using 6,12-dibromochrysene (DBCh), we successfully constructed and characterized the large-area two-dimensional chiral networks on Au(111) and one-dimensional metal-liganded chiral chains on Cu(111) respectively. The reasons and processes of chiral transformation of chiral networks on Au(111) were analyzed. We used scanning tunneling spectroscopy (STS) to analyze the electronic state information of this chiral structure. This work combines scanning tunneling microscopy (STM) with non-contact atomic force microscopy (nc-AFM) techniques to achieve ultra-high-resolution characterization of chiral structures on low-dimensional surfaces, which may be applied to the bond analysis of functional nanofilms. Density functional theory (DFT) was used to simulate the adsorption behavior of the molecular and energy analysis in order to verify the experimental results.     

Flexible NO2-Functionalized N-Heterocyclic Carbene Monolayers on Au (111) Surface

The formation of flexible self-assembled monolayers (SAMs) in which an external trigger modifies the geometry of surface-anchored molecules is essential for the development of functional materials with tunable properties. In this work, it is demonstrated that NO₂-functionalized N-heterocyclic carbene molecules (NHCs), which were anchored on Au (111) surface, change their orientation from tilted into flat-lying position following trigger-induced reduction of their nitro groups. DFT calculations identified that the energetic driving force for reorientation was the lower steric hindrance and stronger interactions between the chemically reduced NHCs and the Au surface. The trigger-induced changes in the NHCs′ anchoring geometry and chemical functionality modified the work function and the hydrophobicity of the NHC-decorated Au surface, demonstrating the impact of a chemically tunable NHC-based SAM on the properties of the metal surface.     

Template-directed assembly of a de novo designed protein

Many naturally occurring biomaterials are composed of laminated structures in which layers of beta-sheet proteins alternate with layers of inorganic mineral. These ordered laminates often have structural and mechanical properties that differ significantly from those of nonbiological materials. An important step in the construction of novel biomaterials is the creation of composites wherein a de novo designed protein assembles into an ordered structure. To achieve this goal, we layered a de novo protein onto the surface of highly ordered pyrolytic graphite (HOPG). The protein was derived from a combinatorial library of novel sequences designed to fold into amphiphilic beta-sheet structures. Atomic force microscopy reveals that the protein assembles on the HOPG surface into ordered fibers aligned in three orientations at 120 degrees to each other. The symmetry and extent of the ordered regions indicate that the hexagonal lattice underlying the graphite surface templates assembly of millions of protein molecules into a highly ordered structure.     

4-Mercaptopyridine on Au(111): a scanning tunneling microscopy and spectroscopy study

The adsorption of 4-mercaptopyridine (4MPy) molecules on reconstructed Au(111) is investigated by Scanning Tunneling Microscopy (STM) and Spectroscopy (STS) at low temperature and under ultra-high vacuum (UHV) conditions. As made visible by STM, at low coverage (<10%) 4MPy adsorbs preferentially at elbow sites of the Herringbone reconstruction and at step edges of the Au(111). Increasing coverage (but still <30%) results in formation of molecular chains followed, at even higher coverage, by a 3-dimensional growth. Detailed analysis of z-V spectroscopy (ramping the tunneling bias V while keeping the tunneling current constant) provides information on the bias dependent apparent height of a single 4MPy/Au(111) as well as on the local density of states (LDOS) of single and chain 4MPy molecules in comparison to the bare Au(111) surface revealing a significant shift of the lowest unoccupied molecular orbital (LUMO) towards lower energy for molecules within chains. Additionally, the data provide no evidence that for these samples prepared in UHV the adsorption of 4MPy on Au(111) requires mediating Au adatoms. Also, clear indications are given that the adsorption does not induce a strong reduction of the Au DOS close to its Fermi energy. Finally, in context of the apparent STM height of 4MPy molecules, the behavior of the differential barrier height Φ(diff)(V) = (?(z)?(V)I/?(V)I)(2) on bare Au(111) and 4MPy/Au(111) is analyzed and the corresponding experimental values are applied to recover the LDOS of the molecule for unoccupied states according to a previously published numerical recipe [B. Koslowski, H. Pfeifer and P. Ziemann, Phys. Rev. B, 2009, 80, 165419 and M. Ziegler, N. Néel, A. Sperl, J. Kr?ger, and R. Berndt, Phys. Rev. B, 2009, 80, 125402]. In this way, one obtains a spectrum comprising a constant DOS of the Shockley-like surface state of Au(111) and a Lorentzian line attributed to the LUMO of 4MPy.     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Light-induced Photoswitching of 4-(Phenylazo)benzoic Acid on Au(111)

Photochromic molecules can undergo a reversible conversion between two isomeric forms upon exposure to external stimuli such as electromagnetic radiation. A significant physical transformation accompanying the photoisomerization process defines them as photoswitches, with potential applications in various molecular electronic devices. As such, a detailed understanding of the photoisomerization process on surfaces and the influence of the local chemical environment on switching efficiency is essential. Herein, we use scanning tunneling microscopy to observe the photoisomerization of 4-(phenylazo)benzoic acid (PABA) assembled on Au(111) in kinetically constrained metastable states guided by pulse deposition. Photoswitching is observed at low molecular density and is absent in tight-packed islands. Furthermore, switching events were noted in PABA molecules coadsorbed in a host octanethiol monolayer, suggesting an influence of the surrounding chemical environment on photoswitching efficiency.     

氧化锌有序结构在Au(111)和Cu(111)上的生长

利用NO₂或O₂作为氧化剂,研究了氧化锌在Au(111)和Cu(111)上的生长和结构。NO₂表现了更好的氧化性能,有利于有序氧化锌纳米结构或薄膜的生长。在Au(111)和Cu(111)这两个表面上,化学计量比氧化锌都形成非极性的平面化ZnO(0001)的表面结构。在Au(111)上,NO₂气氛下室温沉积锌倾向于形成双层氧化锌纳米结构;而在更高的沉积温度下,在NO₂气氛中沉积锌则可同时观测到单层和双层氧化锌纳米结构。O₂作为氧化剂时可导致形成亚化学计量比的ZnO_x结构。由于铜和锌之间的强相互作用会促进锌的体相扩散,并且铜表面可以被氧化形成表面氧化物,整层氧化锌在Cu(111)上的生长相当困难。我们通过使用NO₂作为氧化剂解决了这个问题,生长出了覆盖Cu(111)表面的满层有序氧化锌薄膜。这些有序氧化锌薄膜表面显示出莫尔条纹,表明存在一个ZnO和Cu(111)之间的莫尔超晶格。实验上观察到的超晶格结构与最近理论计算提出的Cu(111)上的氧化锌薄膜结构相符,具有最小应力。我们的研究表明,氧化锌薄膜的表界面结构可能会随氧化程度或氧化剂的不同而变化,而Cu(111)的表面氧化也可能影响氧化锌的生长。当Cu(111)表面被预氧化成铜表面氧化物时,ZnO_x的生长模式会发生变化,锌原子会受到铜氧化物晶格的限域形成单位点锌。我们的研究表明了氧化锌的生长需要抑制锌向金属基底的扩散,并阻止亚化学计量比ZnO_x的形成。因此,使用原子氧源有利于在Au(111)和Cu(111)表面上生长有序氧化锌薄膜。     

Thermally Driven Structural Order of Oligo(Ethylene Glycol)-Terminated Alkanethiol Monolayers on Au(111) Prepared by Vapor Deposition

To probe the effects of deposition temperature on the formation and structural order of self-assembled monolayers (SAMs) on Au(111) prepared by vapor deposition of 2-(2-methoxyethoxy)ethanethiol (CH₃O(CH₂)₂O(CH₂)₂SH, EG2) for 24 h, we examined the surface structure and electrochemical behavior of the resulting EG2 SAMs using scanning tunneling microscopy (STM) and cyclic voltammetry (CV). STM observations clearly revealed that EG2 SAMs vapor-deposited on Au(111) at 298 K were composed of a disordered phase on the entire Au surface, whereas those formed at 323 K showed improved structural order, showing a mixed phase of ordered and disordered phases. Moreover, at 348 K, uniform and highly ordered EG2 SAMs on Au(111) were formed with a (2 × 3√3) packing structure. CV measurements showed sharp reductive desorption (RD) peaks at −0.818, −0.861, and −0.880 V for EG2 SAM-modified Au electrodes formed at 298, 323, and 348 K, respectively. More negative potential shifts of RD peaks with increasing deposition temperature are attributed to an increase in van der Waals interactions between EG2 molecular backbones resulting from the improved structural quality of EG2 SAMs. Our results obtained herein provide new insights into the formation and thermally driven structural order of oligo(ethylene glycol)-terminated SAMs vapor-deposited on Au(111).     

Aggregation-induced folding of a de novo designed polypeptide immobilized on gold nanoparticles

This communication reports the first steps in the construction of a novel, nanoparticle-based hybrid material for biomimetic and biosensor applications. Gold nanoparticles were modified with synthetic polypeptides to enable control of the particle aggregation state in a switchable manner, and particle aggregation was, in turn, found to induce folding of the immobilized peptides.     

Self-assembled monolayers of alkanethiols on Au(111): surface structures, defects and dynamics

The surface structures, defects and dynamics of self-assembled monolayers (SAMs) on Au(111) are reviewed. In the case of the well-known c(4 x 2) and radical 3 x radical 3 R30 degrees surface structures, the present discussion is centered on the determination of the adsorption sites. A more complex scenario emerges for the striped phases, where a variety of surface structures that depends on surface coverage are described. Recently reported surface structures at non-saturation coverage show the richness of the self-assembly process. The study of surface dynamics sheds light on the relative stability of some of these surface structures. Typical defects at the alkanethiol monolayer are shown and discussed in relation to SAMs applications.