Guided waves in a stratified half-space

The dispersion and excitation mechanisms and the energy distribution of guided waves in a stratified half-space are studied. All possible guided waves excited by a symmetric point source in two or three-layer medium models and their relation to the medium parameters are analyzed in detail. The excitation and propagation characteristics, as well as the energy distribution along the depth direction, of all modes of the surface waves and trapped waves are numerically investigated and analyzed thoroughly not only in the case when the shear wave velocity increases from up to down layers but also when a low-velocity layer is contained in halfspace, especially when the shear wave velocity decreases from up to down layers. It is found that there exist many guided wave modes in the case where the shear wave velocity of each layer increases from up to down layers. However, there is less than one guided wave mode in the case where the shear wave velocity of each layer decreases from up to down layers. The trapped waves exist and propagate along the low-velocity structure in the stratified half-space. It is also found that the characteristic of a mode is related to the source frequency. It is possible that a surface wave at one value of frequency is like a trapped wave at another value of frequency. Finally, the relation of the characteristics of all guided waves (surface waves and trapped waves) to the parameters of media is studied.     

Precision frequency measurement of visible intercombination lines of strontium

We report the direct frequency measurement of the visible 5s(2) 1S0-5s5p 3P1 intercombination line of strontium that is considered a possible candidate for a future optical-frequency standard. The frequency of a cavity-stabilized laser is locked to the saturated fluorescence in a thermal Sr atomic beam and is measured with an optical-frequency comb generator referenced to the SI second through a global positioning system signal. The 88Sr transition is measured to be at 434 829 121 311 (10) kHz. We measure also the 88Sr-86Sr isotope shift to be 163 817.4 (0.2) kHz.     

北极冰-水耦合系统中声波传播特性

利用固体和流体介质中波传播理论,导出了冰-水两层复合结构中导波频散方程.进一步,利用二分法对频散方程进行了数值求解,得到了 w-k频散曲线(w与k分别为圆频率和波数),以及相速度和群速度频散曲线.结果表明:冰-水两层复合结构中导波由具有相同厚度水层和冰层中导波耦合而成,但与水层和冰层中导波频散曲线相比,复合结构中导波频...     

Investigation of the phase velocities of guided acoustic waves in soft porous layers

A new experimental method for measuring the phase velocities of guided acoustic waves in soft poroelastic or poroviscoelastic plates is proposed. The method is based on the generation of standing waves in the material and on the spatial Fourier transform of the displacement profile of the upper surface. The plate is glued on a rigid substrate so that it has a free upper surface and a nonmoving lower surface. The displacement is measured with a laser Doppler vibrometer along a line corresponding to the direction of propagation of plane surface waves. A continuous sine with varying frequencies was chosen as excitation signal to maximize the precision of the measurements. The spatial Fourier transform provides the wave numbers, and the phase velocities are obtained from the relationship between wave number and frequency. The phase velocities of several guided modes could be measured in a highly porous foam saturated by air. The modes were also studied theoretically and, from the theoretical results, the experimental results, and a fitting procedure, it was possible to determine the frequency behavior of the complex shear modulus and of the complex Poisson ratio from 200 Hz to 1.4 kHz, in a frequency range higher than the traditional methods.     

A numerical study on the propagation of Rayleigh and guided waves in cortical bone according to Mindlin's Form II gradient elastic theory

Cortical bone is a multiscale heterogeneous natural material characterized by microstructural effects. Thus guided waves propagating in cortical bone undergo dispersion due to both material microstructure and bone geometry. However, above 0.8 MHz, ultrasound propagates rather as a dispersive surface Rayleigh wave than a dispersive guided wave because at those frequencies, the corresponding wavelengths are smaller than the thickness of cortical bone. Classical elasticity, although it has been largely used for wave propagation modeling in bones, is not able to support dispersion in bulk and Rayleigh waves. This is possible with the use of Mindlin's Form-II gradient elastic theory, which introduces in its equation of motion intrinsic parameters that correlate microstructure with the macrostructure. In this work, the boundary element method in conjunction with the reassigned smoothed pseudo Wigner-Ville transform are employed for the numerical determination of time-frequency diagrams corresponding to the dispersion curves of Rayleigh and guided waves propagating in a cortical bone. A composite material model for the determination of the internal length scale parameters imposed by Mindlin's elastic theory is exploited. The obtained results demonstrate the dispersive nature of Rayleigh wave propagating along the complex structure of bone as well as how microstructure affects guided waves.     

Generation of soliton-like wave packets and wave packets with linear phase modulation in gaining optical wave-guides with saturable nonlinearity

We have considered the dynamics of soliton-like pulses and stable frequency-modulated self-similar pulses in an active medium with saturable nonlinearity and a parabolic refractive-index profile. We show that, based on gaining gradient fibers with a parabolic distribution of the refractive index and saturable nonlinearity, it is possible to create complexes that ensure generation of laser pulses with a high (above 1 TW) peak power.     

匹配型保偏光纤自动对轴技术

The auto alignment technique is studied for the PM fiber (PMF) of matching refractive index(MRI). The polarization observation by lens effect tracing technique(POL) is introduced. Based on the POL,an auto alignment system is designed and its performance is then tested. Different light intensity distribution characteristic is found on the different observation surfaces in a series of experients. The widest range of adjustment is achieved when the observation surface corresponds to a light intensity distribution with five characteristic points. This means it is easier to focus.The five point method is presented after analysis of the curves of the five characteristic points with respect to the azimuth angle of the optical fiber.By comparison with the POL,this method is easier to be realized and has higher measurement accuracy,so it is suitable for auto alignment system.     

Surface electromagnetic waves at the interface between a homogeneous medium and a system of coupled waveguides

An analysis is made of the experimental investigations of the surface waves existing at the interface between a homogeneous medium and a periodically stratified medium that represents a bounded system of coupled waveguides. It is shown that, in all cases of the observation of surface waves, the bounded system of coupled waveguides has its own spectrum of guided modes and a spectrum of leaky modes that become surface waves of the system. It is also demonstrated that a biosensor can successfully operate when two surface waves serve as leaky modes of a Bragg waveguide in which the periodic system of waveguides is used as a distributed Bragg mirror of this waveguide. A structure supporting surface waves is designed on the basis of ten pairs of Nb₂O₅-SiO₂ layers and implemented experimentally. The surface waves are detected with a K8 glass prism according to the Kretschmann scheme.     

光折变表面波诱导的薄层波导中的导波模式

利用数值模拟对扩散非线性机制下由光折变表面波诱导的薄层波导中导模的形成和特点进行了研究。采用分布傅里叶法对导模的传输特性进行了模拟。通过求解本征方程,对光折变表面波诱导的薄层波导中存在的导波模式进行了数值求解。通过调节传播常数和波导参数的方法,可以控制导模的阶数和传播波形。随着阶数的增加,导模轮廓的对称性越来越差;随着波导参数的增加,导模的峰值振幅单调递增。导模的能量主要聚集在晶体薄层波导中靠近-c轴的一侧,随着传播常数的增大,导模能量先减小后增大,且导模可以稳定传播。     

Broadband non-polarizing beam splitter based on guided mode resonance effect

A broadband non-polarizing beam splitter (NPBS) operating in the telecommunication C+L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator (SOI) elements. It is shown that this double layer SOI structure can provide ～50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4 μm～1.7 μm and 1% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology.     

反WKB方法的改进

改进了用于确定渐变平面波导折射率分布的反WKB方法。这种渐变折射率分布是从在WKB近似的条件下得到的本征方程用数值方法求得的。用改进的反WKB方法计算3种(指数、高斯和阶跃函数)折射率分布，结果验证了该方法的有效性。先用最小二乘法拟合测量得到的有效折射率。进而求出有效折射率函数，再利用改进的算法分布计算出各自的折射率分布。计算结果同精确值吻合得很好。计算出的波导表明折射率同精确值的绝对误差约为0．1%。     

Photonic device fabrication in glass by use of nonlinear materials processing with a femtosecond laser oscillator

Single-mode X couplers and three-dimensional waveguides are fabricated in transparent glasses by use of an unamplified femtosecond laser generating energies of up to 100 nJ. Changing fabrication parameters such as power and scanning speed permits creation of waveguides with a wide range of structures and refractive-index difference. Optical coherence tomography shows large refractive-index changes of up to ~10(-2) in the waveguides; these changes are consistent with guided mode analysis.     

Correlation between helical surface waves and guided modes of an infinite immersed elastic cylinder

Scattering of obliquely incident plane acoustic waves from immersed infinite solid elastic cylinders is a complex phenomenon that involves generation of various types of surface waves on the body of the cylinder. Mitri [F.G. Mitri, Acoustic backscattering enhancement resulting from the interaction of an obliquely incident plane wave with an infinite cylinder, Ultrasonics 50 (2010) 675-682] recently showed that for a solid aluminum cylinder, there exist acoustic backscattering enhancements at a normalized frequency of ka?0.1. The incidence angle α_c at which these enhancements are observed lies between the first (longitudinal) and second (shear) coupling angles of the cylinder. He also confirmed the observations previously reported by the authors that there exist backscattering enhancements of the dipole mode at large angles of incidence where no wave penetration into the cylinder is expected. In this paper, physical explanations are provided for the aforementioned observations by establishing a correlation between helical surface waves generated by oblique insonification of an immersed infinite solid elastic cylinder and the longitudinal and flexural guided modes that can propagate along the cylinder. In particular, it is shown that the backscattering enhancement observed at ka?0.1 is due to the excitation of the first longitudinal guided mode travelling at the bar velocity along the cylinder. It is also demonstrated that the dipole resonance mode observed at incidence angles larger than the Rayleigh coupling angle is associated with the first flexural guided mode of the cylinder. The correlation established between the scattering and propagation problems can be used in both numerical and experimental studies of interaction of mechanical waves with cylinders.     

New approach to the excitation of plate waves for piezoelectric thick-film devices

A method is presented for exciting the propagation of plate waves in elastic guides. It is implemented in a device whose minimum working structure consists of a non-piezoelectric plane guide and two piezoelectric transducers operating as a generator and detector. The device is entirely in accordance with thick-film technology standard procedures. Both transducers are composed of a PZT ferroelectric layer deposited on a ceramic substrate and a suitable system of three coplanar metal electrodes placed inside the same layer. Beside setting the wavelength of propagation, the electrode system promotes piezoelectric deformations parallel to the substrate simultaneously contracting and extending contiguous active regions in the layer. Pure shear stresses are then induced on the involved guide surface, alternately distributed, with the spatial periodicity of the wave that will propagate in the guide. The propagation of several kinds of guided waves is possible so the selection of the one that meets a specific device design best is allowed.This work describes the design, realization and operation of a prototype structure consisting of an alumina plate guide and two pairs of piezoelectric thick-film transducers realized on it. The results related to the propagation of symmetric and asymmetric Lamb modes are reported. Moreover, the potential of the method is highlighted, emphasizing its effectiveness, easy implementation and application in the development of devices for the sensing and non-destructive testing areas.     

Characterization of mechanical and geometrical properties of a tube with axial and circumferential guided waves

Guided waves propagating in cylindrical tubes are frequently applied for the characterization of material or geometrical properties of tubes. In a tube, guided waves can propagate in the axial direction and called axial guided waves, or in the circumferential direction called circumferential guided waves. Dispersion spectra for the axial and circumferential guided waves share some common behaviors and however exhibit some particular behaviors of their own. This study provides an investigation with theoretical modeling, experimental measurements, and a simplex-based inversion procedure to explore the similarity and difference between the axial guided waves and circumferential guided waves, aiming at providing useful information while axial and circumferential guided waves are applied in the area of material characterization. The sensitivity to the radius curvature for the circumferential guided waves dispersion spectra is a major point that makes circumferential guided waves different from axial guided waves. For the purpose of material characterization, both axial and circumferential guided waves are able to extract an elastic moduli and wall-thickness information from the dispersion spectra, however, radius information can only be extracted from the circumferential guided waves spectra.     

Guided electromagnetic waves at the interface between a dielectric and a topological insulator

Surface electromagnetic waves that propagate within the interface between a conventional dielectric or a metamaterial and a topological insulator with an undamped surface electric current are considered. Dispersion relations are given for guided waves that are surface waves polarized differently on either side of the media interface and create a coupling state due to the magnetoelectric effect.     

Excitation and propagation of non-axisymmetric guided waves in a hollow cylinder

Excitation and propagation of non-axisymmetric guided waves in a hollow cylinder is studied by using the normal mode expansion method (NME). Different sources such as angle beam, tube end excitation with normal beam, and comb transducer possibilities are discussed based on the derivations of the NME method. Numerical calculations are focused on the case of angle beam partial loading. Based on the NME method, the amplitude coefficients for all of the harmonic modes are obtained. Due to the difference of phase velocities for different modes, the superimposed total field varies with propagating distances and hence makes particle displacement distribution patterns (angular profile) change with distance. This varying non-axisymmetric angular profile of guided waves represents a nonuniform energy distribution around the hollow cylinder and thus has an impact on the inspection ability of guided waves. The angular profiles of an angle beam source are predicted by theory and then verified by experiments. The predicted angular profiles also provide information for determining the transducer location to find defects in a certain position on the hollow cylinder.     

Influence of imperfect bonding on interface waves guided by piezoelectric/piezomagnetic composites

Interface waves, which can be guided by imperfectly bonded piezoelectric and piezomagnetic half-spaces, are studied. The cases of absorbent and permeable interfaces are discussed in detail. It is shown that imperfection of the interface bonding has significant impact on the existence of interface waves and on their velocities of propagation. Some interface waves present in the case of imperfect bonding vanish when the bonding becomes perfect. The waves that are guided by an imperfect interface are shown to be dispersive, although there is no explicit characteristic length in the structure model. The results obtained show that possible imperfections of interface bonding must be considered in the design and fabrication of piezoelectric/piezomagnetic composites.     

Natural beam focusing of non-axisymmetric guided waves in large-diameter pipes

The propagation of non-axisymmetric guided waves in larger diameter pipes is studied in this paper by treating the guided waves as corresponding Lamb waves in an unwrapped plate. This approximation leads to a simpler method for calculating the phase velocities of hollow cylinder guided waves, which reveals a beam focusing nature of non-axisymmetric guided waves generated by a partial source loading. The acoustic fields in a pipe generated by a partial-loading source includes axisymmetric longitudinal modes as well as non-axisymmetric flexural modes. The circumferential distribution of the total acoustic field, also referred as an angular profile, diverges circumferentially while guided waves propagate with dependence on such factors as mode, frequency, cylinder size, propagation distance, etc. Exact prediction of the angular profile of the total field can only be realized by numerical calculations. In particular cases, however, when the wall thickness is far less than the cylinder diameter and the wavelength is smaller than or comparable to the pipe wall thickness, the acoustic field can be analyzed based on the characteristics of Lamb waves that travel along a periodic unwrapped plate. Based on this assumption, a simplified model is derived to calculate the phase velocities of non-axisymmetric flexural mode guided waves. The model is then applied to discussions on some particular characteristics of guided-wave angular profiles generated by a source loading. Some features of flexural modes, such as cutoff frequency values are predicted with the simpler model. The relationship between the angular profiles and other factors such as frequency, propagation distance, and cylinder size is obtained and presented in simple equations. The angular profile rate of change with respect to propagation distance is investigated. In particular, our simplified model for non-axisymmetric guided waves predicts that the wave beam will converge to its original circumferential shape after the wave propagates for a certain distance. A concept of "natural focal point" is introduced and a simple equation is derived to compute the 1st natural focal distance of non-axisymmetric guided waves. The applicable range of the simplified equation is provided. Industrial pipes meet the requirement of wall thickness being far less than the pipe diameter. The approximate analytical algorithms presented in this paper provides a convenient method enabling quick acoustic field analysis on large-diameter industrial pipes for NDE applications.