Monte-Carlo simulation of microwave noise in n-type InSb

Numerical Monte Carlo calculations of the electron noise temperature dependence on the electric field strength in n-type InSb are presented. It is established that hot electron noise temperature in strongly compensated InSb increases with the increase of electron density due to more intensive electron–electron scattering stimulating delocalization of electrons from the bottom of the conduction band. For low electron density, when the electron–electron scattering is negligibly small, the electron noise temperature is found to become close to the lattice temperature in a wide range of electric field strength in which the electron gas cooling effect takes place. Satisfactory agreement between calculations of the electron noise temperature and available experimental data has been obtained.     

Molecular integrals of relativistic effects with gaussian-type orbitals

A mathematical analysis is presented of molecular integrals of relativistic interactions in molecules. The integrals are based on Gaussian-type orbitals and include those arising from variation of electron mass with velocity, one-electron Fermi contact interaction, electron spin-same-orbit interaction, electron spin-nuclear spin interaction, electron spin-spin contact interaction, electron spin-other-orbit interaction, electron spin-spin dipolar interaction and electron orbit-orbit interaction. The integrals are expressed in suitable forms for use in computer. It is also pointed out that the integrals are written essentially in terms of the overlap, nuclear attraction, electron repulsion, or field integrals.     

New perspective of electron transfer chemistry

A new perspective of electron transfer chemistry is described for fine control of electron transfer reactions including back electron transfer in the charge separated state of artificial photosynthetic compounds and its synthetic application. Fundamental electron transfer properties of suitable components of efficient electron transfer systems are described in light of the Marcus theory of electron transfer, in particular focusing on the Marcus inverted region, and they are applied to design multi-step electron transfer systems which can well mimic the function of a photosynthetic reaction center. Both intermolecular and intramolecular electron transfer processes are finely controlled by complexation of radical anions, produced in the electron transfer, with metal ions which act as Lewis acids. Quantitative measures to determine the Lewis acidity of a variety of metal ions are given in relation to the promoting effects of metal ions on the electron transfer reactions. The mechanistic viability of metal ion catalysis in electron transfer reactions is demonstrated by a variety of examples of chemical transformations involving metal ion-promoted electron transfer processes as the rate-determining steps, which are made possible by complexation of radical anions with metal ions.     

Grazing-exit electron probe X-ray microanalysis (GE-EPMA): Fundamental and applications

Electron probe microanalysis (or Scanning electron microscope-energy dispersive X-ray spectrometry) has been studied under grazing-exit conditions. That is, characteristic X-rays are detected at a very small take-off (exit) angle; the technique is known as grazing-exit electron probe microanalysis (GE-EPMA). Fundamental aspects, instrumentation, and characteristics of grazing-exit electron probe X-ray microanalysis method are described here. Since the observation depth decreases as the exit angle decreases, theoretically to a few nanometers, surface analysis is possible in grazing-exit electron probe X-ray microanalysis. Of course, the size of the electron beam is also small—less than 1 μm, enabling localized surface analysis. In the case of total reflection X-ray spectrometry that allows surface analysis, the whole sample surface must be flat. However, the requirement for flatness is not as strict in grazing-exit electron probe X-ray microanalysis. Grazing-exit electron probe X-ray microanalysis measurements can easily be applied using a commercially available electron probe microanalysis (or Scanning electron microscope-energy dispersive X-ray spectrometry) instrument. To change and control the exit angle in grazing-exit electron probe X-ray microanalysis, the inclination of the sample stage or movement of the X-ray detector is all that is required. Theoretically, this study shows that grazing-exit electron probe X-ray microanalysis would be useful in improving the lateral resolution of the sample surface. In addition, the study demonstrates that grazing-exit electron probe X-ray microanalysis can be applied successfully for surface, thin-film, and particle analyses. As an optional method of electron probe microanalysis, grazing-exit electron probe X-ray microanalysis will be useful in expanding the research fields of normal electron probe microanalysis.     

Photosensitized electron transfer processes of nanocarbons applicable to solar cells

Photosensitized electron-transfer processes of nanocarbon materials hybridized with electron donating or electron accepting molecules have been surveyed in this tutorial review on the basis of the recent results reported mainly from our laboratories. As nano-carbon materials, fullerenes and single wall carbon nanotubes (SWCNTs) have been employed. Fullerenes act as photo-sensitizing electron acceptors with respect to a wide variety of electron donors; in addition, the fullerenes act as good ground state electron acceptors in the presence of light-absorbing electron donors such as porphyrins and phthalocyanines. In the case of SWCNTs, their ground states act as electron acceptor and electron donors, depending on the photosensitizers. For example, with respect to the photoexcited porphyrins and phthalocyanines, SWCNTs usually act as electron acceptors, whereas for the photoexcited fullerenes, SWCNTs act as electron donors. The diameter sorted semi-conductive SWCNTs have been used to verify the size-dependent electron transfer rates. For the confirmation of the electron transfer processes, the transient absorption methods have been widely used, in addition to the time-resolved fluorescence spectral measurements. The kinetic data thus obtained in solution are found to be quite useful to predict the efficiencies of photovoltaic cells constructed on semiconductor nanoparticle modified electrodes and their photocatalytic processes.     

Optimizing the performance of an electron gun design followed by lenses and apertures

The electron gun plays an important role in atomic, molecular, and surface physics. Different types of electron guns have been designed for producing different electron beam energies. In this study, we present the modeling and construction of a seven-element electron gun with deflector system for electron impact studies. The electron optics of the electron gun was simulated and optimized using electron-beam ray-tracing simulation program SIMION 3D 7.0. Different operation mode of the gun, afocal, broad, and zoom beam mode, can be accommodated by adjusting various potentials. This modeling proposed here may help to design new types of electron guns and applications using cylinder and aperture lenses in collision experiments.     

Photo-Induced Intermolecular Electron Transfer-Effect of Acceptor Molecular Structures

Photo-induced electron transfer versus molecular structure of acceptors is investigated using ultrafast time-resolved transient grating spectroscopy. Typical laser dyes Rhodamine 101 (Rh101) and Rhodamine 6G (Rh6G) in electron donor solvent-aniline are adopted as the objects. The forward electron transfer time constant from aniline to the excited singlet state of two Rhodamine dyes and subsequent back electron transfer from two dyes to aniline are measured. The experimental results denote that Rh6G presents faster electron transfer rates with aniline in both forward electron transfer and back electron transfer processes. With chemical calculation and qualitative analysis, it is found that the flexible molecular geometry of Rh6G leads to stronger electron coupling with donor solvent and further gives rise to larger electron transfer rates.     

Non-nuclear attractor of electron density as a manifestation of the solvated electron

Two or more polar molecules can trap an excess electron either in a dipole-bound fashion where it is located outside of the cluster (dipole-bound electron) or inside the cluster (solvated electron). The topology of the electron density in dipole-bound and solvated-electron clusters has been examined for the paradigm (HF)3- cluster. As spatial confinement of the excess electron increases, a non-nuclear maximum (or attractor) of the electron density eventually forms, which suggests that the solvated electron can be described as a topological atom with its own set of physicochemical properties.     

Single electron densities: a new tool to analyze molecular wavefunctions

A new partitioning scheme for the electron density of a many-electron wavefunction into single electron densities is proposed. These densities are based on the most probable arrangement of the electrons in an atom or molecule. Therefore, they contain information about the electron-electron interaction and, most notably, the Fermi hole due to the antisymmetry of the many-electron wavefunction. The single electron densities overlap and can be combined to electron pair distributions close to the qualitative electron pairs that represent, for instance, the basis of the valence shell electron pair repulsion model. Single electron analyses are presented for the water, ethane, and ethene molecules. The effect of electron correlation on the single electron and pair densities is investigated for the water molecule.     

Spectroscopic imaging techniques for characterization of polymer morphologies: a combination of infrared and electron microscopy

The morphological characterization of polymer blends consisting of polyamide and poly(tetrafluoroethylene) using FT-IR spectroscopy and electron microscopy is described. To enhance the lateral resolution - one of the main limits in infrared spectroscopy - a combination with scanning electron microscopy and analytical electron microscopic methods of a transmission electron microscope was made. The possibilities of electron energy loss spectroscopy and energy filtered transmission electron microscopy (EFTEM) in the area of polymer characterization are outlined.     

垃圾填埋初期水溶性有机物电子转移能力特征研究

为了阐明填埋垃圾初期水溶性有机物( DOM)电子转移能力的演变规律及影响因素,采集不同深度填埋垃圾并提取DOM,以希瓦氏菌MR-1和柠檬酸铁( FeCut)分别作为电子供体和电子受体,测定DOM的电子供给能力( EDC)、电子接受能力( EAC)和电子穿梭能力( ESC),采用光谱分析技术对电子转移能力的3种影响因素进行解析。结果表明,DOM中类腐殖质物质和类蛋白物质既能够作为电子供体传递出自身携带的电子,又可以作为电子受体接受微生物供给的电子。随着垃圾填埋的进行,DOM的电子供给能力和电子接受能力均先升高后降低,而电子穿梭能力持续增强。类蛋白物质是填埋初期 DOM 的主要成分,其含量决定DOM的电子供给能力和电子接受能力的演变。随着填埋时间的延长,类蛋白物质的降解是DOM的电子接受能力和电子供给能力降低的主要原因。 DOM反复氧化还原过程中光谱特征和参数变化规律显示DOM的电子穿梭能力主要源于DOM中类腐殖质物质。在填埋垃圾降解和腐殖化过程中,DOM中类腐殖质物质不断合成,致使其电子穿梭能力不断增强。     

Electron and positron pair emission by low energy positron impact on surfaces

The emission of electron pairs from surfaces has the power to reveal details about the electron–electron interaction in condensed matter. This process, stimulated by a primary electron or photon beam, has been studied both in experiment and theory over the last two decades. An additional pathway, namely positron–electron pair emission, holds the promise to provide additional information. It is based on the notion that the Pauli exclusion principle does not need to be considered for this process.We have commissioned a laboratory based positron source and performed a systematic study on a variety of solid surfaces. In a symmetric emission geometry we can explore the fact that positron and electron are distinguishable particles. Following fundamental symmetry arguments we have to expect that the available energy is shared unequally among positron and electron. Experimentally we observe such a behavior for all materials studied. We find an universal feature for all materials in the sense that on average the positron carries a larger fraction of the available energy. This is qualitatively accounted for by a simplified scattering model. Numerical results, which we obtained by a microscopic theory of positron–electron emission from surfaces, reveal however that there are also cases in which the electron carries more energy. Whether the positron or the electron is more energetic depends on details of the bound electron state and of the emission geometry. The coincidence intensity is strongly material dependent and there exists an almost monotonic relation between the singles and coincidence intensity. These results resemble the findings obtained in electron and photon stimulated electron pair emission. An additional reaction channel is the emission of an electron pair upon positron impact. We will discuss the energy distributions and the material dependence of the coincidence signal which shows similar features as those for positron–electron pairs.     

Electron transfer versus proton transfer in gas-phase ion/ion reactions of polyprotonated peptides

The ion/ion reactions of several dozen reagent anions with triply protonated cations of the model peptide KGAILKGAILR have been examined to evaluate predictions of a Landau-Zener-based model for the likelihood for electron transfer. Evidence for electron transfer was provided by the appearance of fragment ions unique to electron transfer or electron capture dissociation. Proton transfer and electron transfer are competitive processes for any combination of anionic and cationic reactants. For reagent anions in reactions with protonated peptides, proton transfer is usually significantly more exothermic than electron transfer. If charge transfer occurs at relatively long distances, electron transfer should, therefore, be favored on kinetic grounds because the reactant and product channels cross at greater distances, provided conditions are favorable for electron transfer at the crossing point. The results are consistent with a model based on Landau-Zener theory that indicates both thermodynamic and geometric criteria apply for electron transfer involving polyatomic anions. Both the model and the data suggest that electron affinities associated with the anionic reagents greater than about 60-70 kcal/mol minimize the likelihood that electron transfer will be observed. Provided the electron affinity is not too high, the Franck-Condon factors associated with the anion and its corresponding neutral must not be too low. When one or the other of these criteria is not met, proton transfer tends to occur essentially exclusively. Experiments involving ion/ion attachment products also suggest that a significant barrier exists to the isomerization between chemical complexes that, if formed, lead to either proton transfer or electron transfer.     

Rational design principle for modulating fluorescence properties of fluorescein-based probes by photoinduced electron transfer

Fluorescence properties of fluorescein-based probes are shown to be finely controlled by the rate of photoinduced electron transfer from the benzoic acid moiety (electron donor) to the singlet excited state of the xanthene moiety (electron acceptor fluorophore). The occurrence of photoinduced electron transfer is clearly evidenced by transient absorption spectra showing bands due to the radical cation of the electron donor moiety and the radical anion of the xanthene moiety, observed in laser flash photolysis experiments. The photoinduced electron transfer rates and the rates of back electron transfer follow the Marcus parabolic dependence of electron transfer rate on the driving force. Such a dependence provides for the first time a quantitative basis for a rational design principle which has high efficiency in modulating fluorescence properties of fluorescein-based probes.     

EVO MA 15钨灯丝扫描电子显微镜的日常维护

钨灯丝扫描电子显微镜具有造价和运行成本低、样品适用性广的特点,在各研究机构的利用率很高,日常维护保养是保障其性能的必要手段.除了常规的扫描电子显微镜维护以外,因钨灯丝扫描电子显微镜结构特点,又有一些异于其它类型扫描电子显微镜的维护要点.以蔡司的EVO MA 15型钨灯丝扫描电子显微镜为例,从电子光学系统、真空系统、成像系统三个方面,阐述了钨灯丝扫描电子显微镜日常维护保养的具体办法,以供同行参考.     

Electron localization functions and local measures of the covariance

The electron localization measure proposed by Becke and Edgecombe is shown to be related to the covariance of the electron pair distribution. Just as with the electron localization function, the local covariance does not seem to be, in and of itself, a useful quantity for elucidating shell structure. A function of the local covariance, however, is useful for this purpose. A different function, based on the hyperbolic tangent, is proposed to elucidate the shell structure encapsulated by the local covariance; this function also seems to work better for the electron localization measure of Becke and Edgecombe. In addition, we propose a different measure for the electron localization that incorporates both the electron localization measure of Becke and Edgecombe and the Laplacian of the electron density; preliminary indications are that this measure is especially good at elucidating the shell structure in valence regions. Methods for evaluating electron localization functions directly from the electron density, without recourse to the Kohn-Sham orbitals, are discussed.     

Can a dipole-bound electron form a pseudo-atom? An atoms-in-molecules study of the hydrated electron

Non-nuclear local maxima, or attractors, of electron density are a rare but very interesting feature of the electron density distribution in molecules and solids. Recently, non-nuclear attractors (NNAs) and the corresponding pseudoatoms of electron density have been identified with the quantum theory of atoms in molecules for some anionic clusters formed by several polar solvent molecules and an excess electron bound in either a solvated-electron or dipole-bound fashion. This contribution reports a detailed study of the topology of the electron density for a series of dipole-bound water cluster anions, as calculated with Hartree-Fock, M?ller-Plesset perturbation theory, and coupled-cluster methods together with basis sets augmented with extra diffuse basis functions to accommodate the excess electron. For dipole-bound clusters, electron densities obtained with insufficient inclusion of electron correlation effects and tight basis sets feature a well-pronounced pseudoatom due to the excess electron, which ultimately disappears when a higher level of electronic structure theory and a more diffuse basis set are used. On the other hand, for solvated-electron clusters, where the excess electron is surrounded by solvent molecules, the existence of NNAs does not seem to be an artifact of the method employed, but rather a genuine feature of the electron density distribution. Pseudoatoms of electron density thus appear to be an exclusive feature of confined environments and are unlikely to be found on the tip of a cluster dipole or on solid surfaces.     

Recent advances in photoinduced electron transfer processes of fullerene-based molecular assemblies and nanocomposites

Photosensitized electron-transfer processes of fullerenes hybridized with electron donating or other electron accepting molecules have been surveyed in this review on the basis of the recent results reported mainly from our laboratories. Fullerenes act as photo-sensitizing electron acceptors with respect to a wide variety of electron donors; in addition, fullerenes in the ground state also act as good electron acceptors in the presence of light-absorbing electron donors such as porphyrins. With single-wall carbon nanotubes (SWCNTs), the photoexcited fullerenes act as electron acceptor. In the case of triple fullerene/porphyrin/SWCNT architectures, the photoexcited porphyrins act as electron donors toward the fullerene and SWCNT. These mechanisms are rationalized with the molecular orbital considerations performed for these huge supramolecules. For the confirmation of the electron transfer processes, transient absorption methods have been used, in addition to time-resolved fluorescence spectral measurements. The kinetic data obtained in solution are found to be quite useful to predict the efficiencies of photovoltaic cells.     

Nanocrystalline Domain Identification in Gold Films, by Backscattered Electron Imaging and Energy-Filtered Transmission Electron Microscopy

Gold nanocrystallites dispersed in an inhomogeneous gold matrix are detected by high-resolution scanning electron microscopy using a field emission source and backscattered electron detection in the composition mode, as well as by energy-filtered transmission electron microscopy in the plasmon energy region. The identity of the nanocrystalline domains was established by observing the same evaporated gold film samples but using bright-field, dark-field, electron diffractogram, and electron energy loss spectroscopy images in the transmission electron microscope. Comparison of these images shows that backscattered electron and plasmon energy detection can be used to identify crystalline domains in an otherwise chemically uniform sample. Copyright 2001 Academic Press.