Thermal decomposition kinetics of some aromatic azomonoethers

The non-isothermal kinetic parameters corresponding to the decomposition of 4-[(4-chlorobenzyl)oxy]-4’-nitro-azobenzene were evaluated. The kinetic analysis was performed by means of different multi-heating rates methods: isoconversional (‘model-free’) methods (Flynn–Wall–Ozawa) and invariant kinetic parameters method (IKP) associated with the criterion of the independence of activation parameters on the heating rate. The values of the obtained non-isothermal kinetic parameters are in satisfactory agreement.     

Thermal decomposition kinetics of some aromatic azomonoethers

Thermal analysis of three azomonoether dyes, exhibiting liquid-crystalline properties, was performed in dynamic air atmosphere. Thermal stability studies and the evaluation of the kinetic parameters of each physical or chemical transformations are essential for a full characterization, before attempting accurate thin films’ depositions of such materials used in non-linear optical applications. New synthesized dyes with general formula: where R is a nematogenic group: CN, CF₃ or a highly polarizable group: NO₂ were investigated using TG, DTG, DTA and DSC techniques, under non-isothermal regime. The evolved gases were analyzed by FTIR spectroscopy. The activation energies of the first decomposition step were evaluated for each compound, the obtained results revealing complex mechanisms.     

Thermal decomposition and non-isothermal decomposition kinetics of carbamazepine

The thermal stability and kinetics of isothermal decomposition of carbamazepine were studied under isothermal conditions by thermogravimetry (TGA) and differential scanning calorimetry (DSC) at three heating rates. Particularly, transformation of crystal forms occurs at 153.75°C. The activation energy of this thermal decomposition process was calculated from the analysis of TG curves by Flynn-Wall-Ozawa, Doyle, distributed activation energy model, ?atava-?esták and Kissinger methods. There were two different stages of thermal decomposition process. For the first stage, E and logA [s^?1] were determined to be 42.51 kJ mol^?1 and 3.45, respectively. In the second stage, E and logA [s^?1] were 47.75 kJ mol^?1 and 3.80. The mechanism of thermal decomposition was Avrami-Erofeev (the reaction order, n = 1/3), with integral form G(α) = [?ln(1 ? α)]^1/3 (α = ～0.1–0.8) in the first stage and Avrami-Erofeev (the reaction order, n = 1) with integral form G(α) = ?ln(1 ? α) (α = ～0.9–0.99) in the second stage. Moreover, ΔH ^≠, ΔS ^≠, ΔG ^≠ values were 37.84 kJ mol^?1, ?192.41 J mol^?1 K^?1, 146.32 kJ mol^?1 and 42.68 kJ mol^?1, ?186.41 J mol^?1 K^?1, 156.26 kJ mol^?1 for the first and second stage, respectively.     

Thermal behavior and decomposition kinetics

The thermal behaviors of [1,1,1-trifluro-3-(2-thenoyl)-acetonato]copper(II) Cu(TTA)₂ and its adducts with pyridine Cu(TTA)₂(Py)₂, 2,2'-bipyridine Cu(TTA)₂(Bpy), quinoline Cu(TTA)₂(Ql)₂, and dimethyl sulfoxide Cu(TTA)₂(DMS) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC technique. The results showed that the evolution of the solvent molecules generally proceeded before the release of TTA in different ways according to their structures. The Cu(TTA)₂(Bpy) exhibited a unique decomposition pattern due to its distinctive structure. The dependences of activation energy on extent of reaction for all the stage of each compound were determined by using an isoconversional method, Flynn-Wall-Ozawa equation, which show E values varied with reaction progress, indicating the complexity of these decomposition reactions. In addition, the values of activation energy E for TTA molecules evolution are generally higher than that for the solvent molecules release. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition processes in aromatic polythiocarbonates

The thermal degradation of some polythiocarbonates obtained from bisphenol A bischloroformate and dithiols have been investigated by thermogravimetry and by direct pyrolysis in the mass spectrometer operating both in electron and chemical ionization. Poly(bisphenol A-co-tri-methylenedithiocarbonate) decomposes by an intramolecular exchange process (back-biting) producing trimethylene-1,3-dithiocarbonate and bisphenol A polycarbonate. The latter undergoes further thermal degradation at higher temperature yielding cyclic oligomers. Polymers containing tetramethylene-1,4-dithiocarbonate and hexamethylene-1,6-dithiocarbonate units decompose by the same mechanism, but the elimination of the dithiocarbonate units is not as fast and selective as the previous case. Some bisphenol A units are eliminated in the first thermal degradation stage and a rearrangement reaction producing ether linkage also occurs. Poly(phenylene-1,3-dithiocarbonate) decomposes by CO and COS loss with formation of sulfide and disulfide bridges along the polymer chains, which undergo further thermal degradation by a back-biting process yielding a series of cyclic compounds. The thermal degradation of Poly(bisphenol A-co-phenylenedithiocarbonate) takes place through an interchange reaction producing phenylene-1,3-dithiocarbonate sequences which further decompose as the corresponding polymer. The remaining bisphenol A polycarbonate decomposes at higher temperature producing cyclic carbonates.     

Thermal decomposition kinetics of strontium oxalate

The thermal decomposition behavior in air of SrC₂O₄ · 1.25H₂O was studied up to the formation of SrO using DTA-TG-DTG techniques. The decomposition proceeds through four well-defined steps. The first two steps are attributed to the dehydration of the salt, while the third and fourth ones are assigned to the decomposition of the anhydrous strontium oxalate into SrCO₃ and the decomposition of SrCO₃ to SrO, respectively. The exothermic DTA peak found at around 300°C is ascribed to the recrystallization of the anhydrous strontium oxalate. On the other hand, the endothermic DTA peak observed at 910°C can be attributed to the transition of orthorhombic-hexagonal phase of SrCO₃. The kinetics of the thermal decomposition of anhydrous strontium oxalate and strontium carbonate, which are formed as stable intermediates, have been studied using non-isothermal TG technique. Analysis of kinetic data was carried out assuming various solid-state reaction models and applying three different computational methods. The data analysis according to the composite method showed that the anhydrous oxalate decomposition is best described by the two-dimensional diffusion-controlled mechanism (D₂), while the decomposition of strontium carbonate is best fitted by means of the three-dimensional phase boundary-controlled mechanism (R₃). The values of activation parameters obtained using different methods were compared and discussed.     

Thermal decomposition kinetics of potassium iodate

The effect of gamma ray irradiation on the rate and kinetics of thermal decomposition of potassium iodate (KIO₃) has been studied by thermogravimetry (TG) under non-isothermal conditions at different heating rates (3, 5, 7, and 10 K min^?1). The thermal decomposition data were analyzed using isoconversional methods of Flynn–Wall–Ozawa, Kissinger–Akahira–Sunose, and Friedman. Irradiation with gamma rays increases the rate of the decomposition and is dependent on the irradiation dose. The activation energy decreases on irradiation. The enhancement of the rate of the thermal decomposition of KIO₃ upon irradiation is due to the combined effect of the production of displacements and extended lattice defects and chemical damage in KIO₃. Non-isothermal model fitting method of analysis showed that the thermal decomposition of irradiated KIO₃ is best described by the contracting sphere model equation, with an activation energy value of ~340 kJ mol^?1.     

Thermal decomposition kinetics of potassium iodate

The thermal decomposition of potassium iodate (KIO₃) has been studied by both non-isothermal and isothermal thermogravimetry (TG). The non-isothermal simultaneous TG–differential thermal analysis (DTA) of the thermal decomposition of KIO₃ was carried out in nitrogen atmosphere at different heating rates. The isothermal decomposition of KIO₃ was studied using TG at different temperatures in the range 790–805 K in nitrogen atmosphere. The theoretical and experimental mass loss data are in good agreement for the thermal decomposition of KIO₃. The non-isothermal decomposition of KIO₃ was subjected to kinetic analyses by model-free approach, which is based on the isoconversional principle. The isothermal decomposition of KIO₃ was subjected to both conventional (model fitting) and model-free (isoconversional) methods. It has been observed that the activation energy values obtained from all these methods agree well. Isothermal model fitting analysis shows that the thermal decomposition kinetics of KIO₃ can be best described by the contracting cube equation.     

Thermal decomposition kinetics of sodium metaperiodate

Aged and fresh samples of sodium metaperiodate are subjected to thermal decomposition studies in air by TG, DTG and DTA techniques. The kinetic parameters for their decomposition have been evaluated by weighted least squares method using equations of Coats-Redfern, Horowitz-Metzger and Freeman-Carroll. The results indicate that, within the limits of experimental error, ageing did not change the E^* values considerably.

---

, . , -, - -. , , , E^*.

     

过氧化二异丙苯的热分解动力学研究

过氧化二异丙苯(DCP)是一种有广泛用途的过氧化物交联剂,具有高的交联效率和优良的交联性能.其分解温度较低,热分解速度较快,即使没有外界能量的作用,在自然储存的条件下也会发生化学反应,放出热量[1,2].     

Thermal decomposition kinetics of potassium iodate

The rate and kinetics of the thermal decomposition of potassium iodate (KIO₃) has been studied as a function of particle size, in the range 63?C150???m, by isothermal thermogravimetry at different temperatures, 790, 795, 800 and 805?K in nitrogen atmosphere. The theoretical and experimental mass loss data are in good agreement for the thermal decomposition of all samples of KIO₃ at all temperatures studied. The isothermal decomposition of all samples of KIO₃ was subjected to both model-fitting and model-free (isoconversional) kinetic methods of analysis. It has been observed that the activation energy values are independent of the particle size. Isothermal model-fitting analysis shows that the thermal decomposition kinetics of all the samples of KIO₃ studied can be best described by the contracting cube equation.     

Thermal decomposition of some hexaborates

Thermal decomposition of iron(II) and cobalt(II) hexaborates has been investigated. The methods applied to investigate the process were differential thermal analysis, derivatography, crystallooptics and x-ray study. The following iron(II) hexaborate hydrates, FeO · 3B₂O₃ · 7.5H₂O, FeO · 3B₂O₃ · 5H₂O, FeO · 3B₂O₃ · 0.5H₂O; iron(III) borates, Fe₂O₃ · 6B₂O₃ and 2Fe₂O₃ · B₂O₃; cobalt(II)hexaborate hydrates CoO · 3B₂O₃ · 7.5H₂O, CoO · 3B₂O₃ · 5H₂O, CoO · 3B₂O₃ · 0.5H₂O, CoO · 3B₂O₃ and the decomposition product 2CoO · 3B₂O₃ have been isolated. Hepta- and semihydrates of cobalt(II) and iron(II) hexaborates have been proved to be isomorphous. It has been established that in the case of cobalt and iron hexaborates the exothermic maximum refers to a decomposition reaction and to the formation of a borate containing a smaller proportion of boron and boric anhydride.     

Thermal behaviour and non-isothermal decomposition kinetics of some Nd(III) coordination compounds

The authors present the results concerning the thermal behaviour of three polynuclear coordination compounds of Nd(III) and Co(II) or Fe(III) with triptophan. For the dehydration steps the values of the non-isothermal kinetic parameters have been determined.     

Thermal decomposition kinetics of nickel fluorenone semicarbazone

Thermal decomposition of nickel fluorenone-semicarbazone has been studied by TG. Thermoanalytical data (TG and DTG) of the chelate are presented. Mass loss considerations at the main decomposition stages indicate conversion of the complex to oxide. Mathematical analysis of TG data shows that first order kinetics is applicable for the first stage and second order to the second stage. Kinetic parameters (energy and entropy of activation and preexponential factor) are reported.

---

. ( ) . . , , — . ( ).

     

Thermal decomposition kinetics of aluminum sulfate hydrate

The kinetics of individual stages of thermal decomposition of Al₂(SO₄)₃·18H₂O were studied by TG method. It is found that Al₂(SO₄)₃·18H₂O decomposes to Al₂O₃ in four major stages, all of endothermic. Some of these major stages are formed by sub-stages. The first three major stages are dehydration reactions in which two, ten and six moles water are lost, respectively. The last major stage is sulfate decomposition. In this study the kinetic parameter values of these major and sub-stages were calculated by integral and differential methods. The alterations of activation energies with respect to the decomposition ratio and to the method were investigated.     

Thermal decomposition of some metal-organic precursors

In this paper we present a study on the synthesis of Fe(III) oxide, by thermal decomposition of some complex combinations of Fe(III) with carboxylate type ligands, obtained in the redox reaction between some polyols (ethylene glycol (EG), 1,2-propane diol (1,2PG), 1,3-propane diol (1,3PG) and glycerol (GL)) and NO₃ ^– ions (from ferric nitrate). Fe₂O₃ was obtained by thermal decomposition of the synthesized metal-organic precursors at low temperatures. γ-Fe₂O₃ was obtained as nanoparticles at 300°C, while at higher temperatures α-Fe₂O₃ starts to crystallize and becomes single phase at ~500°C. The formation of the metal-organic precursors and their thermal decomposition were studied by thermal analysis and FTIR spectroscopy.     

Thermal decomposition of some metal sulphates

The thermal decomposition temperatures of some metal sulphates (iron, copper, cobalt, nickel, zinc and lead sulphates) have been investigated by TG and DTA. The mechanism of decomposition of these sulphates is discussed, making use of additional information obtained from isothermal studies and X-ray diffraction measurements. The activation energies of these reactions were calculated and found to increase, with almost the same increments, in the order Zn<Fe<Co<Ni<Cu.     

Thermal decomposition of some diuretic agents

Thermogravimetry-derivativc thermogravimetry and differential scanning calorimetry were used to study the thermal behaviour of furosemide, hydrochlorothiazide, spironolactone, and amiloride hydrochloride. The results revealed the extents of their thermal stability and also permitted interpretations concerning their thermal decompositions.The authors thank FAPESP (Proc. 90/2932-4) and CNPq for financial support, and Hoechst of Brazil, Prodome Química e Farmaceutica Ltda, Campinas, Brazil, and Biolab. Industrias Farmaceuticas, Brazil, for supplying the diuretic agents used in this study.     

Thermal decomposition of some analgesic agents

Thermogravimetry, derivative thermogravimetry (TG, DTG) and differential scanning calorimetry (DSC), were used to study the thermal behaviour of mefenamic acid, ibuprofen, acetaminophen, sodium diclofenac, phenylbutazone, dipyrone and salicylamide. The results led to thermal stability data and also to the interpretation concerning the thermal decomposition.The authors thank the FAPESP (Proc. 90/2933-4) and Biogalenica Quimica e Farmaceutica Ltda, Merrel Lepetit Farmaceutica Ltda, Roche Quimicos e Farmaceuticos S.A., Rhodia S.A. and Aché Laboratorios Farmaceuticos S.A., for supplying the analgesic agents.