后过渡金属催化醇对胺的N-烷基化反应研究进展

胺的N-烷基化反应是一类重要的有机合成反应,其合成产物烷基化胺更是涉及到包括化工、医疗、医药以及国防等重要领域.近年来随着化学技术,尤其是绿色催化合成技术的发展,使得该类反应已成为当前有机反应的研究热点之一.以醇作为胺的N-烷基化试剂,水是唯一的副产物,因此具有绿色环保、简单可靠的特点.但是绝大多数该类反应都需要过渡金属催化剂.从脂肪胺、芳香胺、杂环芳香胺等含氮化合物出发,综述了近年来金属催化的以醇为烷基化试剂的胺的N-烷基化反应的研究进展,主要介绍了各均相、多相金属催化反应体系,通过比较指出了每一方法的优缺点,并对今后氮烷基化反应的发展方向进行了展望.     

Cu(OTf)_2催化腈和芳胺与醇的N-烷基化反应

报道了低用量Cu(OTf)_2催化下腈与仲醇和部分伯醇的Ritter反应.研究表明,仅2 mol%Cu(OTf)_2即可高效催化反应进行,得到55~90%收率的一系列N-烷基酰胺产物.该方法还可以进一步拓展到芳胺与二级醇的脱水N-烷基化反应合成取代胺.     

多相双金属Pt-Sn/γ-Al_2O_3催化的胺N-烷基化反应合成仲胺和叔胺

基于借氢策略、醇为烷基化试剂的胺的N-烷基化反应是合成胺类化合物的绿色途径.在无外加氢源条件下,多相双金属Pt-Sn/γ-Al2O3催化剂可高效催化醇为烷基化试剂的伯(仲)胺的N-烷基化反应合成仲(叔)胺,反应副产物为水与极少量亚胺.催化体系的底物适应性好,目标产物收率高;催化剂可以循环使用,具有潜在的工业化应用前景.     

过渡金属与有机分子协同催化:高对映选择性卡宾对脂肪胺N-H键的插入反应

过渡金属催化的卡宾对X-H(X=C,Si,N,O,S)键的插入反应是卡宾的一类特征反应,在有机合成中应用广泛[1].其中N-H键插入是构建C—N键的一种高效方法,特别是相应的不对称催化,对合成含氮手性化合物具有重要意义.近年来,人们以芳香胺或酰胺作为底物,在手性过渡金属催化剂的存在下,实现了卡宾对其N—H键高对映选择性的插入反应,从而发展了天然或非天然α-手性氨基酸衍生物合成的新方法[2].     

无过渡金属催化条件下咪唑衍生物与炔基溴的炔基化反应研究

以炔基溴和咪唑衍生物为反应原料,详细探讨了无过渡金属催化条件下的咪唑类芳香炔胺化合物的合成方法.研究结果表明,以N,N-二甲基甲酰胺为溶剂、碳酸钾为碱,于80℃下反应12 h即可获得中等偏上收率的碳-氮偶联产物.通过上述方法合成得到了系列芳香炔胺衍生物,其结构经1H NMR和13C NMR表征.     

金/钯双金属纳米颗粒协同催化酰胺和醇间氢自转移反应中路易斯酸驱动反应路径（英文）

金属纳米颗粒,特别是金和它的双金属纳米颗粒作为强大的绿色催化剂广泛用于有机合成反应中.在一个反应体系中使用2个不同催化剂(如协同催化),在均相催化中是一个很好的策略.然而,这种方法仍在发展中.最近我们发现,金/钯双金属纳米颗粒与路易斯酸的协同催化体系可用于伯胺的N-烷基化:即酰胺与醇之间的氢自转移反应.我们详细报道了路易斯酸对该氢自转移反应的影响.结果表明,所选的路易斯酸不仅影响生成目标产物的反应路径,而且影响生成多个中间体和副产物的反应路径.弱的路易斯酸,如三氟甲磺酸碱土金属盐,非常适合酰胺的N-烷基化反应.     

磺酰胺为烷基化试剂高选择性合成多取代烯烃和2,3-二氢茚衍生物的方法

在质子酸H_2SO_4催化下,含β氢醇与磺酰胺反应可高选择性地得到三取代烯烃和2,3-二氢茚衍生物.含β氢醇酸性条件下脱水后与磺酰胺发生偶联,可以选择性地合成热力学稳定产物Z-多取代烯烃;两者发生[3+2]环加成反应,则可高选择性地得到2,3-二氢茚衍生物.     

金/钯双金属纳米颗粒协同催化酰胺和醇间氢自转移反应中路易斯酸驱动反应路径

金属纳米颗粒,特别是金和它的双金属纳米颗粒作为强大的绿色催化剂广泛用于有机合成反应中。在一个反应体系中使用2个不同催化剂(如协同催化),在均相催化中是一个很好的策略。然而,这种方法仍在发展中。最近我们发现,金/钯双金属纳米颗粒与路易斯酸的协同催化体系可用于伯胺的N-烷基化：即酰胺与醇之间的氢自转移反应。我们详细报道了路易斯酸对该氢自转移反应的影响。结果表明,所选的路易斯酸不仅影响生成目标产物的反应路径,而且影响生成多个中间体和副产物的反应路径。弱的路易斯酸,如三氟甲磺酸碱土金属盐,非常适合酰胺的N-烷基化反应。     

钯催化高效低碳烯烃氢胺羰基化反应

<正>Angew.Chem.Int.Ed.2015,54,7657~7661酰胺广泛应用于医药、农药及化工相关领域,其高效合成是有机化学领域的研究热点.过渡金属钯催化的烯烃氢胺羰基化反应是合成酰胺的重要方法之一,但该类反应是由[M—H]启动,仅兼容弱碱性芳香胺,不适用碱性较强的脂肪胺.因此,如何克服脂肪胺的强碱性导致的反应"壁垒"和高选择性是该方法的关键科学问题.中国科学院兰州化学物理研究所黄汉民课题组利用胺缩醛所具有的弱碱性,以脂肪胺缩醛为氮源通过C—N键活化的方法,实现     

一种合成聚酰胺,羟基聚酰胺和聚酯的新方法

本文研究了四氢噻唑-2-硫酮(TTT)双活泼酰胺与胺的N-酰基化反应,与醇的O-酰基化反应及与羟胺的选择性N-酰基化反应。以四氢噻唑-2-硫酮的双活泼酰胺作为双功能团单体,合成了一系列聚酰胺、羟基聚酰胺和聚酯化合物。对所合成化合物的结构用IR、NMR和元素分析方法进行了验证,测定了聚合物的比浓粘度。     

Synthesis and structure of hydroxyisoxazolidines and derivatives of hydroxylamine and alkenals

The reactions of N-substituted hydroxylamines with alkenals serve as a method for the synthesis of the corresponding 2-substituted 3(5)-hydroxyisoxazolidines. The reaction pathway is determined by the nature of the substituent attached to the nitrogen atom. Ring-chain isomerism has been detected in these newly obtained compoundsTranslated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1270–1276, September, 1987.     

Synthesis and characterization of triazenide and triazene complexes of ruthenium and osmium

Triazenide [M(eta2-1,3-ArNNNAr)P4]BPh4 [M = Ru, Os; Ar = Ph, p-tolyl; P = P(OMe)3, P(OEt)3, PPh(OEt)2] complexes were prepared by allowing triflate [M(kappa2-OTf)P4]OTf species to react first with 1,3-ArN=NN(H)Ar triazene and then with an excess of triethylamine. Alternatively, ruthenium triazenide [Ru(eta2-1,3-ArNNNAr)P4]BPh4 derivatives were obtained by reacting hydride [RuH(eta2-H2)P4]+ and RuH(kappa1-OTf)P4 compounds with 1,3-diaryltriazene. The complexes were characterized by spectroscopy and X-ray crystallography of the [Ru(eta2-1,3-PhNNNPh){P(OEt)3}4]BPh4 derivative. Hydride triazene [OsH(eta1-1,3-ArN=NN(H)Ar)P4]BPh4 [P = P(OEt)3, PPh(OEt)2; Ar = Ph, p-tolyl] and [RuH{eta1-1,3-p-tolyl-N=NN(H)-p-tolyl}{PPh(OEt)2}4]BPh4 derivatives were prepared by allowing kappa1-triflate MH(kappa1-OTf)P4 to react with 1,3-diaryltriazene. The [Os(kappa1-OTf){eta1-1,3-PhN=NN(H)Ph}{P(OEt)3}4]BPh4 intermediate was also obtained. Variable-temperature NMR studies were carried out using 15N-labeled triazene complexes prepared from the 1,3-Ph15N=N15N(H)Ph ligand. Osmium dihydrogen [OsH(eta2-H2)P4]BPh4 complexes [P = P(OEt)3, PPh(OEt)2] react with 1,3-ArN=NN(H)Ar triazene to give the hydride-diazene [OsH(ArN=NH)P4]BPh4 derivatives. The X-ray crystal structure determination of the [OsH(PhN=NH){PPh(OEt)2}4]BPh4 complex is reported. A reaction path to explain the formation of the diazene complexes is also reported.     

Mass and NMR spectra of haplophyllidine and perforine and of their derivatives

Conclusions The mass and NMR spectra of haplophyllidine, perforine, and their derivatives have been studied. The influence of the open and cyclic forms of the molecular ion on the nature of the fragmentation has been discussed. The main routes of fragmentation of the compounds considered are due to the presence of substituents at C₈ and C₄.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 4, pp. 273–279, 1969     

Investigation of adhesion and mobility of polyurethane and epoxy-rubber glues and adhesives

The values of activation parameters in uncured and cured epoxy resins, rubbers, and blends thereof are investigated. The dependences of activation energy and adhesion strength of epoxy-rubber compositions on rubber content are determined. The correlation of adhesion and activation energy values for polyurethane rubber and epoxy-rubber compositions is shown.     

Crystal and molecular structure of aroyl- and acetylhydrazones of acet- and benzaldehydes

Aroyl- and acetylhydrazones of acet- (I) and benzaldehydes (IV) and benzoylhydrazones of acet- (II) and benzaldehydes (III) were studied by x-ray structural and quantum-chemical methods in order to establish their structures. Compund (I) was the EEZ structure in the crystal. Calculations and spectral data showed that the EEE form occurs in nonpolar solvents and in the gas phase. According to crystallographic data molecules (I)–(IV) are the E-isomers (relative to the N-N bond) and the hydrazone fragments are planar. Intermolecular N-H...O H-bonds from in the crystals. The data obtained suggest that the majority of acylhydrazones are conformationally rigid on dissolution although exceptions do occur. Apparently the reasons for the difference of acetyl- and benzoylhydrazones in electrocarboxylation reactions are electronic and not steric factors.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 75–81, January, 1991.     

Preparation and characterization of diarylphosphazene and diarylphosphinohydrazide complexes of titanium, tungsten and ruthenium and phosphorylketimido complexes of rhenium

Reaction of the proligand Ph2PN(SiMe3)2 (L1) with WCl6 gives the oligomeric phosphazene complex [WCl4(NPPh2)]n, 1 and subsequent reaction with PMe2Ph or NBu4Cl gives [WCl4(NPPh2)(PMe2Ph)] (2) or [WCl5(NPPh2)][NBu4] (3), respectively. DF calculations on [WCl5(NPPh2)][NBu4] show a W=N double bond (1.756 A) and a P-N bond distance of 1.701 A, which combined with the geometry about the P atom suggests, there is no P-N multiple bonding. Reaction of L1 with [ReOX3(PPh3)2] in MeCN (X = Cl or Br) gives [ReX2(NC(CH3)P(O)Ph2)(MeCN)(PPh3)](X = Cl, 4, X = Br, 5) which contains the new phosphorylketimido ligand. It is bound to the rhenium centre with a virtually linear Re-N-C arrangement (Re-N-C angle = 176.6 degrees, when X = Cl) and there is multiple bonding between Re and N (Re-N = 1.809(7) A when X = Cl). The proligand Ph2PNHNMe2(L2H) reacts with [(C5H5)TiCl3] to give [(C5H5)TiCl2(Me2NNPPh2)] (6). An X-ray crystal structure of the complex shows the ligand (L2) is bound by both nitrogen atoms. Reaction of the proligands Ph2PNHNR2[R2 = Me2 (L2H), -(CH2CH2)2NCH3 (L3H), (CH2CH2)2CH2 (L4H)] with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave [RuCl2(eta6-p-MeC6H4iPr)L] {L = L2H (7), L3H (8), L4H (9)}. The X-ray crystal structures of 7-9 confirmed that the phosphinohydrazine ligand is neutral and bound via the phosphorus only. Reaction of complexes 7-9 with AgBF4 resulted in chloride ion abstraction and the formation of the cationic species [RuCl(6-p-MeC6H4iPr)(L)]+ BF4- {(L = L2H (10), L3H (11), L4H (12)}. Finally, reaction of complex 6 with [{RuCl(mu-Cl)(eta6-p-MeC6H4iPr)}2] gave the binuclear species [(eta6-p-MeC6H4iPr)Cl2Ru(mu2,eta3-Ph2PNNMe2)TiCl2(C5H5)], 13.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

Kinetics and mechanisms of chlorine dioxide and chlorite oxidations of cysteine and glutathione

Chlorine dioxide oxidation of cysteine (CSH) is investigated under pseudo-first-order conditions (with excess CSH) in buffered aqueous solutions, p[H+] 2.7-9.5 at 25.0 degrees C. The rates of chlorine dioxide decay are first order in both ClO2 and CSH concentrations and increase rapidly as the pH increases. The proposed mechanism is an electron transfer from CS- to ClO2 (1.03 x 10(8) M(-1) s(-1)) with a subsequent rapid reaction of the CS* radical and a second ClO2 to form a cysteinyl-ClO2 adduct (CSOClO). This highly reactive adduct decays via two pathways. In acidic solutions, it hydrolyzes to give CSO(2)H (sulfinic acid) and HOCl, which in turn rapidly react to form CSO3H (cysteic acid) and Cl-. As the pH increases, the (CSOClO) adduct reacts with CS- by a second pathway to form cystine (CSSC) and chlorite ion (ClO2-). The reaction stoichiometry changes from 6 ClO2:5 CSH at low pH to 2 ClO2:10 CSH at high pH. The ClO2 oxidation of glutathione anion (GS-) is also rapid with a second-order rate constant of 1.40 x 10(8) M(-1) s(-1). The reaction of ClO2 with CSSC is 7 orders of magnitude slower than the corresponding reaction with cysteinyl anion (CS-) at pH 6.7. Chlorite ion reacts with CSH; however, at p[H+] 6.7, the observed rate of this reaction is slower than the ClO2/CSH reaction by 6 orders of magnitude. Chlorite ion oxidizes CSH while being reduced to HOCl, which in turn reacts rapidly with CSH to form Cl-. The reaction products are CSSC and CSO3H with a pH-dependent distribution similar to the ClO2/CSH system.