矩形槽道内表面活性剂减阻流体流场特性

采用粒子图像测速仪对矩形槽道内表面活性减阻流体在流动方向(x方向)与壁面垂直方向(y方向)所在平面的流场进行了测量,分析了速度、涡量、速度脉动相关量在流场内的瞬态分布,以及对500幅相同工况的流场进行了统计平均. 结果显示: 与牛顿流体相比, 表面活性剂减阻流体接近于层流流动,横向速度脉动被大幅减弱,导致湍流输运减弱,雷诺应力远远小于水. 减阻流体流向速度脉动呈条带特征,沿流动方向发展,反映了减阻流体不同于水的湍流输运特征.      

Analysis of an organized turbulent structure using a pattern recognition technique in a drag-reducing surfactant solution flow

This work presents the investigation for an organized turbulent structure in a drag-reducing flow of dilute surfactant solution by utilizing a particle image velocimetry system to perform the pattern recognition technique on a trajectory in four quadrants of streamwise and wall-normal velocity fluctuations. The pattern recognition is added to a new algorithm in order to directly capture the spatial rotation motion. The Reynolds number based on the channel height and bulk mean velocity was set to 1.5 × 10⁴. Surfactant solution with a weight concentration of 150 ppm was employed and the drag reduction rate was 65%. In the drag-reducing flow, we observe increased frequencies of occurrence of the flow events that correspond to a meandering motion in the wall-normal direction of the high-and low-speed regions. Three findings from investigation of the ensemble-averaged Reynolds shear stress and vortex structure are as follows: (i) the Reynolds shear stress in the large fluctuation range occurs in the narrow region; (ii) Size, strength, arrangement and inclination in the spatial vortex structure in the drag-reducing flow differ from those of the water; and (iii) all trajectory contributions for the wall friction coefficient decrease. Finally, we interpreted that the viscoelasticity characterizing the viscoelastic stress and relaxation time in rheological properties of the flow changes specific elementary vortex for the drag-reducing flow, and the trajectories of each flow pattern change drastically.     

Investigation of turbulence structures in a drag-reduced turbulent channel flow with surfactant additive by stereoscopic particle image velocimetry

In the present study, we employed stereoscopic particle image velocimetry (PIV) to investigate the characteristics of turbulence structures in a drag-reduced turbulent channel flow with addition of surfactant. The tested drag-reducing fluid was a CTAC/NaSal/Water (CTAC: cetyltrimethyl ammonium chloride; NaSal: sodium salicylate) system at 25°C. The weight concentration of CTAC was 30 ppm. Stereoscopic PIV measurement was performed for a water flow (Re=1.1×10⁴) and a CTAC solution flow (Re=1.5×10⁴ with 54% drag reduction) in both the streamwise–spanwise and wall-normal-spanwise planes, respectively. The three-dimensionality of hairpin vortex structures in the near-wall region for wall-bounded turbulent flow was reproduced by conditionally averaging the stereoscopic two-dimensional-three-component velocity fields. A series of wall-normal vortex cores were found to align with the near-wall low-speed streaks with opposite vorticity signals at both sides of the streaks and with the vorticity decreased on average by about one order of magnitude in CTAC solution flow compared with water flow; the spanwise spacing between the near-wall low-speed streaks in the solution flow is increased by about 46%. The streamwise vorticity of the vortex cores appearing in the wall-normal-spanwise plane was also decreased by the use of drag-reducing surfactant additives.     

Layered structure of turbulent plane wall jet

This paper investigates the layered structure of a turbulent plane wall jet at a distance from the nozzle exit. Based on the force balances in the mean momentum equation, the turbulent plane wall jet is divided into three regions: a boundary layer-like region (BLR) adjacent to the wall, a half free jet-like region (HJR) away from the wall, and a plug flow-like region (PFR) in between. In the PFR, the mean streamwise velocity is essentially the maximum velocity, and the simplified mean continuity and mean momentum equations result in a linear variation of the mean wall-normal velocity and Reynolds shear stress. In the HJR, as in a turbulent free jet, a proper scale for the mean wall-normal flow is the mean wall-normal velocity far from the wall and a proper scale for the Reynolds shear stress is the product of the maximum mean streamwise velocity and the velocity scale for the mean wall-normal flow. The BLR region can be divided into four sub-layers, similar to those in a canonical pressure-driven turbulent channel flow or shear-driven turbulent boundary layer flow. Building on the log-law for the mean streamwise velocity in the BLR, a new skin friction law is proposed for a turbulent wall jet. The new prediction agrees well with the correlation of Bradshaw and Gee (1960) over moderate Reynolds numbers, but gives larger skin frictions at higher Reynolds numbers.     

暖季强降雨对多年冻土南界斜坡路基稳定性影响分析

为阐明表面活性剂水溶液的减阻作用,使用LDV对零压梯度的二维湍流平板边界层中的CTAB 表面活性剂水溶液的湍流特性进行了实验研究. 结果表明：与牛顿流体相比,CTAB水溶液边 界层的粘性底层增厚;主流时均速度分布有被层流化的趋势,对数分布域上移;主流方向速 度湍动强度峰值减小,且远离壁面,在靠近边界层中部,出现第2峰值;垂直于主流方向的 速度湍动强度受到了大幅度抑制,雷诺应力沿着边界层厚度方向几乎为零. 结果说明CTAB 水溶液具有减弱湍流湍动各个成分相关度的作用,从而能够使雷诺应力降低、湍流能量生成 项减小最终降低流体的输送动力.     

Characteristic turbulent structure of a modified drag-reduced surfactant solution flow via dosing water from channel wall

The modification of the near-wall structure is very important for the control of wall turbulence. To ascertain the effect of near-wall modulation on the viscoelastic drag-reduced flow, the modified characteristics of a surfactant solution channel flow were investigated experimentally. The modulation was conducted on the boundary of the channel flow by injecting water from the whole surface of one side of the channel wall. The diffusion process of the injected water was observed by using the planar laser-induced fluorescence technique. The velocity statistics and characteristic structure including the spatial distributions of instantaneous streamwise velocity, swirling strength, and Reynolds shear stress were analyzed based on the velocity vectors acquired in the streamwise wall-normal plane by using the particle imaging velocimetry technique. The results indicated that the disturbance of the injected water was constricted within a finite range very near the dosing wall, and the Reynolds shear stress was increased in this region. However, the eventual drag reduction rate was found to be increased due to a relatively large decrement of viscoelastic shear stress in this near-wall region. Moreover, the flow structure under this modulation presented obvious regional characteristics. In the unstable disturbed region, the mixing of high-speed and low-speed fluids and the motions of ejection and sweep occurred actively. Many clockwise vortex cores were also found to be generated. This characteristic structure was similar to that in the ordinary turbulence of Newtonian fluid. Nevertheless, outside this disturbed region, the structure still maintained the characteristics of the drag-reduced flow with non-Newtonian viscoelastic additives. These results proved that the injected Newtonian fluid associated with the modified stress distribution creates a diverse characteristic structure and subsequent enhanced drag reduction. This investigation can provide the experimental basis for further study of turbulence control.     

Predicting Turbulent Spectra in Drag-reduced Flows

In the present work we describe how turbulent skin-friction drag reduction obtained through near-wall turbulence manipulation modifies the spectral content of turbulent fluctuations and Reynolds shear stress with focus on the largest scales. Direct Numerical Simulations (DNS) of turbulent channels up to Re _τ = 1000 are performed in which drag reduction is achieved either via artificially removing wall-normal turbulent fluctuations in the vicinity of the wall or via streamwise-travelling waves of spanwise wall velocity. This near-wall turbulence manipulation is shown to modify turbulent spectra in a broad range of scales throughout the whole channel. Above the buffer layer, the observed changes can be predicted, exploiting the vertical shift of the logarithmic portion of the mean streamwise velocity profile, which is a classic performance measure for wall roughness or drag-reducing riblets. A simple model is developed for predicting the large-scale contribution to turbulent fluctuation and Reynolds shear stress spectra in drag-reduced turbulent channels in which a flow control acts at the wall. Any drag-reducing control that successfully interacts with large scales should deviate from the predictions of the present model, making it a useful benchmark for assessing the capability of a control to affect large scales directly.     

Turbulent transport dissimilarity with modulated turbulence structure in channel flow of viscoelastic fluid

This experimental study investigated the turbulent transport dissimilarity with a modulated turbulence structure in a channel flow of a viscoelastic fluid using simultaneous particle image velocimetry and planar laser-induced fluorescence measurements. An instantaneous dye concentration field with fluctuating velocity vectors showed that mass was transferred by hierarchically large-scale wavy motions with inclination. A co-spectral analysis showed that the spatial phase modulation of the streamwise velocity and dye concentration fluctuations for the wall-normal velocity fluctuation corresponded to the relaxation time. The occurrence of intense dye concentration fluctuation and small streamwise velocity fluctuation in a thin boundary layer caused dissimilar turbulent transport because of the non-zero negative correlation of the streamwise velocity and dye concentration fluctuations for the wall-normal velocity fluctuation only on large scales. This explains the turbulent transport dissimilarity which leads to the zero averaged Reynolds shear stress and non-zero wall-normal turbulent mass flux.     

TRPIV MEASUREMENT OF DRAG-REDUCTION IN THE TURBULENT BOUNDARY LAYER OVER RIBLETS PLATE

采用高时间分辨率粒子图像测速技术对沟槽壁面平板湍流边界层速度矢量场的时间序列及其统计量进行了实验测量,讨论了在同一来流速度下沟槽壁面对平均速度剖面﹑雷诺切应力及湍流强度的影响. 用流向速度分量的多尺度空间局部平均结构函数辨识壁湍流多尺度相干结构,用条件采样和相位平均技术提取壁湍流多尺度相干结构喷射和扫掠事件的脉动速度、展向涡量的二维空间拓扑形态. 结果表明,与同材料光滑壁面对比,沟槽壁面实现了10.73%的摩阻减小量;沟槽壁面湍流边界层湍流强度及雷诺切应力皆比光滑平板湍流边界层对应统计量小,说明沟槽壁面有效降低了湍流边界层内流体的脉动. 通过比较壁湍流相干结构猝发事件各脉动速度分量与展向涡量的空间分布特征,肯定了沟槽壁面的减阻效果,发现沟槽壁面通过抑制相干结构猝发事件实现减阻.     

添加剂湍流减阻流动与换热研究综述

添加剂湍流减阻是指在液体的管道湍流中添加少量的高分子聚合物或某种表面活性剂从而使湍流阻力大大降低的现象.从其被发现至今,经过近半个世纪的研究(实验研究、理论分析、数值模拟和实际系统的应用研究),尽管对这一现象及其实际应用价值已有了较为深入的认识,但仍有许多方面尚有欠缺,例如对湍流减阻的机理仍然在探索中.本文归纳评述了高分子聚合物或表面活性剂添加剂湍流减阻流动与换热现象的研究现状,从湍流减阻剂的特性、减阻剂的湍流减阻机理、湍流减阻发生时的换热机理、减阻流动速度场分布和换热控制等几个方面综述了添加剂湍流减阻流动与换热特性,并综述了湍流减阻剂在实际工业系统中的应用情况,在对添加剂湍流减阻机理、有湍流减阻发生时的对流换热机理等的理解方面进行了新的总结.      

A study on coherent structures and drag-reduction in the wall turbulence with polymer additives by TRPIV

An experimental measurement was performed using time-resolved particle image velocimetry (TRPIV) to investigate the spatial topological character of coherent structures in wall-bounded turbulence of polymer additive solution. The fully developed near-wall turbulent flow fields with and without polymer additives at the same Reynolds number were measured by TRPIV in a water channel. The comparisons of turbulent statistics confirm that due to viscoelastic structure of long-chain polymers, the wall-normal velocity fluctuation and Reynolds shear stress in the near-wall region are suppressed significantly. Furthermore, it is noted that such a behavior of polymers is closely related to the decease of the motion of the second and forth quadrants, i.e., the ejection and sweep events, in the near-wall region. The spatial topological mode of coherent structures during bursts has been extracted by the new mu-level criteria based on locally averaged velocity structure function. Although the general shapes of coherent structures are unchanged by polymer additives, the fluctuating velocity, velocity gradient, velocity strain rate and vorticity of coherent structures during burst events are suppressed in the polymer additive solution compared with that in water. The results show that due to the polymer additives the occurrence and intensity of coherent structures are suppressed, leading to drag reduction.     

Experimental investigation of streamwise velocity fluctuation based on the Reynolds-number dependency in turbulent viscoelastic-fluid flow

This paper describes an experimental verification of energy supply mechanisms for the streamwise component of the turbulent kinetic energy (TKE) at different Reynolds numbers in viscoelastic-fluid flow. We investigated the characteristics of the streamwise turbulent velocity fluctuation by analyzing the production and turbulent diffusion terms in the TKE transport equation. In addition, we reported on the Reynolds-number dependency in a high Reynolds-number regime where direct numerical simulation cannot demonstrate changes in fluid properties. Based on the experimental verification, we proposed a conceptual model of the energy-exchange term between the TKE and the elastic energy, with focusing on the dependency of the fluid properties on the shear stress. This model is indirectly reflected in the streamwise TKE, the instantaneous velocity field, and the wave number relevant to energy-containing eddies. The main gain term of the TKE switches between the energy-exchange term and the production term dependently on the Reynolds number: as the Reynolds number exceeds the value which provides the maximum drag reduction rate, the production term becomes dominant and the magnitude of streamwise TKE becomes high compared to the water flow case.     

The turbulence vorticity as a window to the physics of friction-drag reduction by oscillatory wall motion

DNS data for channel flow, subjected to spanwise (in-plane) wall oscillations at a friction Reynolds number of 1025, are used to examine the turbulence interactions that cause the observed substantial reduction in drag provoked by the forcing. Following a review of pertinent interactions between the forcing-induced unsteady Stokes strain and the Reynolds stresses, identified in previous work by the present authors, attention is focused on the equations governing the components of the enstrophy, with particular emphasis placed on the wall-normal and the spanwise components. The specific objective is to study the mechanisms by which the Stokes strain modifies the enstrophy field, and thus the turbulent stresses. As such, the present analysis sheds fresh light on the drag-reduction processes, illuminating the interactions from a different perspective than that analysed in previous work. The investigation focuses on the periodic rise and fall in the drag and phase-averaged properties during the actuation cycle at sub-optimal actuation conditions, in which case the drag oscillates by around ±2% around the time-averaged 20% drag-reduction margin. The results bring out the important role played by specific strain-related production terms in the enstrophy-component equations, and also identifies vortex tilting/stretching in regions of high skewness as being responsible for the observed strong increase in the spanwise enstrophy components during the drag-reduction phase. Simultaneously, the wall-normal enstrophy component, closely associated with near-wall streak intensity, diminishes, mainly as a result of a reduction in a production term that involves the correlation between wall-normal vorticity fluctuations and the spanwise derivative of wall-normal-velocity fluctuations, which pre-multiplies the streamwise shear strain.     

Numerical investigation of turbulent channel flow controlled by spatially oscillating spanwise Lorentz force

A formulation of the skin-friction drag related to the Reynolds shear stress in a turbulent channel flow is derived. A direct numerical simulation (DNS) of the turbulent control is performed by imposing the spatially oscillating spanwise Lorentz force. Under the action of the Lorentz force with several proper control parameters, only the periodically well-organized streamwise vortices are finally observed in the near-wall region. The Reynolds shear stress decreases dramatically, especially in the near-wall area, resulting in a drag reduction.     

Higher-order moments and spectra of velocity fluctuations in adverse-pressure-gradient turbulent boundary layer

The characteristics of turbulent boundary layer flows with adverse pressure gradients (APGs) differ significantly from those of canonical boundary layers. We have investigated the effects of an APG on the higher-order moments and spectra of velocity fluctuations. The local wavelet spectra reveal a large difference in energy-containing frequencies of streamwise and wall-normal components of turbulent velocities, which results in smaller Reynolds shear stress production. Moreover, an analysis of bispectra in the Fourier space has revealed that non-local interactions, consisting of streamwise fluctuating velocity with low frequency and wall-normal velocity with high frequency, occur in the APG flow. However, the small-scale motions are not affected by imposing an APG.     

倾斜吹吸控制下湍流边界层减阻的直接数值模拟

雷诺切应力是壁湍流高摩擦阻力的重要来源, 有理论认为可以通过壁面生成负雷诺应力(数值上为正)的方式来削弱湍流流场中雷诺应力的分布, 以此获得流动减阻. 而通过对雷诺平均运动方程的法向二次积分, 可以发现壁面生成正雷诺应力(数值上为负)对壁面摩擦阻力系数才有负贡献. 文中在湍流边界层流动的控制区域下边界设置一系列倾斜狭缝, 利用该装置通过周期性吹吸的方法产生壁面生成正(负)雷诺应力, 并采用直接数值模拟方法考察和验证上文提到的减阻理论. 文中采用的湍流边界层流动模型, 其流动雷诺数(基于外流速度及动量损失厚度)从300 发展到860. 文中通过多组数值模拟算例, 考察了射流强度和频率对壁面摩擦阻力系数的影响, 并对比了壁面生成正或负雷诺应力对流动的影响. 研究表明, 壁面生成正雷诺应力控制的减阻率能达到3.26, 而壁面生成负雷诺应力控制的减阻效果较壁面生成正雷诺应力控制的要差; 壁面生成的正雷诺应力对壁面摩擦阻力有负贡献, 而壁面生成的负雷诺应力对壁面摩擦阻力有正贡献; 通过考察控制的收支比, 发现控制方案不能获得能量净收益.      

Experiments in Turbulent Pipe Flow with Polymer Additives at Maximum Drag Reduction

In this paper we report on (two-component) LDV experiments in a fully developed turbulent pipe flow with a drag-reducing polymer (partially hydrolyzed polyacrylamide) dissolved in water. The Reynolds number based on the mean velocity, the pipe diameter and the local viscosity at the wall is approximately 10000. We have used polymer solutions with three different concentrations which have been chosen such that maximum drag reduction occurs. The amount of drag reduction found is 60–70%. Our experimental results are compared with results obtained with water and with a very dilute solution which exhibits only a small amount of drag reduction. We have focused on the observation of turbulence statistics (mean velocities and turbulence intensities) and on the various contributions to the total shear stress. The latter consists of a turbulent, a solvent (viscous) and a polymeric part. The polymers are found to contribute significantly to the total stress. With respect to the mean velocity profile we find a thickening of the buffer layer and an increase in the slope of the logarithmic profile. With respect to the turbulence statistics we find for the streamwise velocity fluctuations an increase of the root mean square at low polymer concentration but a return to values comparable to those for water at higher concentrations. The root mean square of the normal velocity fluctuations shows a strong decrease. Also the Reynolds (turbulent) shear stress and the correlation coefficient between the stream wise and the normal components are drastically reduced over the entire pipe diameter. In all cases the Reynolds stress stays definitely non-zero at maximum drag reduction. The consequence of the drop of the Reynolds stress is a large polymer stress, which can be 60% of the total stress. The kinetic-energy balance of the mean flow shows a large transfer of energy directly to the polymers instead of the route by turbulence. The kinetic energy of the turbulence suggests a possibly negative polymeric dissipation of turbulent energy. This revised version was published online in July 2006 with corrections to the Cover Date.     

Parametric Study on a Sinusoidal Riblet for Drag Reduction by Direct Numerical Simulation

The direct numerical simulation of fully developed turbulent channel flow with a sinusoidal riblet surface has been carried out at the friction Reynolds number of 110. Lateral spacing of adjacent walls in a sinusoidal riblet is varied sinusoidally in the streamwise direction. The average lateral spacing of a sinusoidal riblet is larger than the diameter of a quasi-streamwise vortex and its wetted area is smaller than that of ordinary straight-type riblets. We investigate the effect of sinusoidal riblet design parameters on the drag reduction rate and flow statistics in this paper. The parametric study shows that the maximum total drag reduction rate is approximately 9.8% at a friction Reynolds number of 110. The riblet induces downward and upward flows in the expanded and contracted regions, respectively, which contribute to periodic Reynolds shear stress. However, the random Reynolds shear stress decreases drastically as compared with the flat surface case, resulting in the reduction of total drag owing to the sinusoidal riblet. We also performed vortex tracking to discuss the motion of the vortical structure traveling over the sinusoidal riblet surface. Vortex tracking and probability analysis for the core of the vortical structure show that the vortical structure is attenuated owing to the sinusoidal riblet and follows the characteristic flow. These results show that the high skin-friction region on the channel wall is localized at the expanded region of the riblet walls. In consequence, the wetted area of the riblet decreases, resulting in the drag-reduction effect.     

Investigation of turbulence and skin friction modification in particle-laden channel flow using lattice Boltzmann method

Interaction between turbulence and particles is investigated in a channel flow. The fluid motion is calculated using direct numerical simulation (DNS) with a lattice Boltzmann (LB) method, and particles are tracked in a Lagrangian framework through the action of force imposed by the fluid. The particle diameter is smaller than the Kolmogorov length scale, and the point force is used to represent the feedback force of particles on the turbulence. The effects of particles on the turbulence and skin friction coefficient are examined with different particle inertias and mass loadings. Inertial particles suppress intensities of the spanwise and wall-normal components of velocity, and the Reynolds shear stress. It is also found that, relative to the reference particle-free flow, the overall mean skin-friction coefficient is reduced by particles. Changes of near wall turbulent structures such as longer and more regular streamwise low-speed streaks and less ejections and sweeps are the manifestation of drag reduction.     

Experimental study on swirling flow of dilute surfactant solution with deformed free-surface

An experimental investigation was performed on a swirling flow of dilute surfactant solution with deformed free-surface in a cylindrical container driven by the constantly rotating bottom wall. The purpose of the experiment was to estimate weak viscoelasticity in the tested surfactant solutions as well as to investigate the flow characteristics. The tested fluid was an aqueous solution of CTAC (CTAC: cetyltrimethyl ammonium chloride), which is a cationic surfactant. Water, 40 ppm, 60 ppm and 200 ppm CTAC solution flows were tested at Froude numbers ranging from 2.59 to 16.3. Particle image velocimetry (PIV) was used to measure the secondary velocity field in the meridional plane. The deformed free-surface level was extracted from the PIV images. At a similar Froude number, the depth of the dip formed at the center region of the free surface was decreased for CTAC solution flow compared with water flow. The inertia-driven vortex at the up-right corner in the meridional plane becomes more and more weakened with increase of the solution concentration or viscoelasticity. Through analyzing the overall force balance compared with water flow, the first normal stress difference characterizing the viscoelasticity was estimated for the dilute CTAC solution flows. The result supports the viscoelasticity-based turbulent drag-reduction mechanism of surfactant solution flow.