Synthesis of hollow silica spheres with mesostructured shell using cationic-anionic-neutral block copolymer ternary surfactants

Hollow silica spheres with mesostructured shells (HSSMS) were prepared with a vesicle template of cetyltrimethylammonium bromide-sodium dodecyl sulfate-Pluronic P123 (C(16)TMAB-SDS-EO(20)PO(70)EO(20)) at a SDS/C(16)TMAB ratio of 0.6-0.8 following a fast silicification in dilute silicate solution at pH approximately 5.0. The mesostructure of the shell is disordered, and the mesopore size is about 5.5-7.5 nm. Moreover, the direction and length of the nanochannels of the shell change with the SDS/C(16)TMAB ratios. A bi-template model, in which the C(16)TMA(+)-DS(-) form the stable bilayer vesicle structure and the P123 copolymers anchored on C(16)TMA(+)-DS(-) vesicle act as the template for the mesoporous silica, was proposed to explain the formation of the HSSMS. This bi-template model can be applied extensively to prepare the HSSMS with different diameters and pore sizes by using other C(n)TMAX-SDS-EO(n)PO(m))EO(n) ternary-surfactant mixtures.     

Oleochemical‐Tethered SBA‐15‐Type Silicates with Tunable Nanoscopic Order,Carboxylic Surface,and Hydrophobic Framework: Cellular Toxicity,Hemolysis, and Antibacterial Activity

Novel silicates were prepared by using silylated natural fatty acids (derived from triglyceride renewable oils) as co‐condensing reagents in presence of tetraethyl orthosilicate (TEOS) and the triblock copolymer, pluronic P123, as a structure directing agent. A series of carboxylic acid functionalized SBA‐15‐type mesoporous silicates were obtained with tunable nanoscopic order and reactive functional groups that allow the conjugation of amino probes by peptide coupling. Photophysical studies of the covalently linked aminopyrene substantiated that the internal framework of these materials have pronounced hydrophobicity. Moreover, phase separation that can emanate from the bulkiness of the starting fatty silanes has been ruled out owing to the absence of excimers after aminopyrene grafting. The hemotoxicity, cytotoxicity, and antimicrobial activity of these novel silicates were then evaluated. Without discrimination, the functionalized silicates show a significant decrease of red blood cell hemolysis as compared to bare SBA‐15‐silica material. Within the modified silicate series, germanium‐free mesoporous silicates induce only a slight decrease in cell viability and, more interestingly, they exhibit negligible hemolytic effect. Moreover, increasing their concentration in the medium reduces the concentration of released hemoglobin as a result of Hb adsorption. Promising antimicrobial properties were also observed for these silicates with a slight dependency on whether phenylgermanium fragments were present within the silicate framework.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Tuning the wall thickness and pore orientation in mesoporous titania films prepared with low-temperature aging

Porous titania thin films with well-ordered mesostructures are prepared by using Pluronic surfactant P123 as the pore template and aging the films in a high-humidity environment at −6 °C. These structures are stable enough to undergo calcination at 400 °C to generate nanocrystalline TiO₂ walls with retention of mesoporosity. Under the aging conditions used, the films have well-ordered mesostructures even with a molar ratio of P123 to titanium (R) as small as 0.006. Because the P123 micelle diameter remains constant across a range of compositions, the pore diameter also remains fixed but the wall thickness of the titania thin films increases as the P123 concentration decreases without decreasing the long-range order of the products. Furthermore, mesoporous titania thin films with hexagonal close-packed channels oriented perpendicular to the substrate can be obtained R values of 0.008–0.012 by sandwiching the as-prepared films between glass slides modified with crosslinked P123. Analysis of the mesophases obtained here indicates that a transition from films containing significant 2D hexagonal channels to 3D hexagonal structure occurs below P123/Ti = 0.008. This does not match the expected volume fraction for this transition based on the mesophases behavior of aqueous P123 at room temperature, suggesting that a more detailed model would be needed to predict mesostructure in titania films aged below the freezing point of water.     

Self-assembly of ABC star triblock copolymer thin films confined with a preferential surface: a self-consistent mean field theory

The microphase separation and morphology of a nearly symmetric A(0.3)B(0.3)C(0.4) star triblock copolymer thin film confined between two parallel, homogeneous hard walls have been investigated by self-consistent mean field theory (SCMFT) with a pseudospectral method. Our simulation experiments reveal that under surface confinement, in addition to the typically parallel, perpendicular, and tilted cylinders, other phases such as lamellae, perforated lamellae, and complex hybrid phases have been found to be stable, which is attributed to block-substrate interactions, especially for those hybrid phases in which A and B blocks disperse as spheres and alternately arrange as cubic CsCl structures, with a network preferred structure of C block. The results show that these hybrid phases are also stable within a broad hybrid region (H region) under a suitable film thickness and a broad field strength of substrates because their free energies are too similar to being distinguished. Phase diagrams have been evaluated by purposefully and systematically varying the film thickness and field strength for three different cases of Flory-Huggins interaction parameters between species in the star polymer. We also compare the phase diagrams for weak and strong preferential substrates, each with a couple of opposite quality, and discuss the influence of confinement, substrate preference, and the nature of the star polymer on the stability of relatively thinner and thick film phases in this work.     

Encapsulation of Homogeneous Catalysts in Mesoporous Materials Using Diffusion‐Limited Atomic Layer Deposition

The heterogenization of homogeneous metal complex catalysts has attracted great attention. The encapsulation of metal complexes into nanochannels of mesoporous materials is achieved by coating metal oxides at/near the pore entrance by diffusion‐limited atomic layer deposition (ALD) to produce a hollow plug. The pore size of the hollow plug is precisely controlled on the sub‐nanometer scale by the number of ALD cycles to fit various metal complexes with different molecular sizes. Typically, Co or Ti complexes are successfully encapsulated into the nanochannels of SBA‐15, SBA‐16, and MCM‐41. The encapsulated Co and Ti catalysts show excellent catalytic activity and reusability in the hydrolytic kinetic resolution of epoxides and asymmetric cyanosilylation of carbonyl compounds, respectively. This ALD‐assisted encapsulation method can be extended to the encapsulation of other homogeneous catalysts into different mesoporous materials for various heterogeneous reactions.     

Tungsten doped mesoporous SBA‐16 as novel heterogeneous catalysts for oxidation of cyclopentene to glutaric acid

Novel heterogeneous tungsten species in mesoporous silica SBA‐16 catalysts based on ship‐in‐a‐bottle methodology are originally reported for oxidizing cyclopentene (CPE) to glutaric acid (GAC) using hydrogen peroxide (H₂O₂). For all W‐SBA‐16 catalysts, isolated tungsten species and octahedrally coordinated tungsten oxide species are observed while WO₃ crystallites are detected for the W‐SBA‐16 catalysts with Si/ W = 5, 10, and 20. The specific surface areas and the corresponding total pore volumes decrease significantly as increasing amounts of tungsten incorporated into the pores of SBA‐16. Using tungsten‐substituted mesoporous SBA‐16 heterogeneous catalysts, high yield of GAC (55%) is achieved with low tungsten loading (for Si/W = 30, ~13 wt%) for oxidation of CPE. The W‐SBA‐16 catalysts with Si/W = 30 can be reused five times without dramatic deactivation. In fact, low catalytic activity provided by bulk WO₃ implies that the highly distributed tungsten species in SBA‐16 and the steric confinement effect of SBA‐16 are key elements for the outstanding catalytic performance.     

Ultrafast enzyme immobilization over large-pore nanoscale mesoporous silica particles

By finely tuning the TEOS/P123 molar ratio of the octane/water/P123/TEOS quadruple emulsion system and by controlling the synthesis conditions, an ultrafine emulsion system was isolated, under the confinement of which, nanoscale silica particles with ordered large mesopores (approximately 13 nm) have been successfully constructed; the obtained mesoporous silica particles have an unusual ultrafast enzyme adsorption speed and the amount of enzyme that can be immobilized is larger than that of conventional mesoporous silica, which has potential applications in the fast separation of biomolecules.     

Lanthanide (Eu3+, Tb3+) Centered Mesoporous Hybrids with 1,3‐Diphenyl‐1,3‐Propanepione Covalently Linking SBA‐15 (SBA‐16) and Poly(methylacrylic acid)

1,3‐Diphenyl‐1,3‐propanepione (DBM)‐functionalized SBA‐15 and SBA‐16 mesoporous hybrid materials (DBM‐SBA‐15 and DBM‐SBA‐16) are synthesized by co‐condensation of modified 1,3‐diphenyl‐1,3‐propanepione (DBM‐Si) and tetraethoxysilane (TEOS) in the presence of Pluronic P123 and Pluronic F127 as a template, respectively. The as‐synthesized mesoporous hybrid material DBM‐SBA‐15 and DBM‐SBA‐16 are used as the first precursor, and the second precursor poly(methylacrylic acid) (PMAA) is synthesized through the addition polymerization reaction of the monomer methacrylic acid. These precursors then coordinate to lanthanide ions simultaneously, and the final mesoporous polymeric hybrid materials Ln(DBM‐SBA‐15)₃PMAA and Ln(DBM‐SBA‐16)₃PMAA (Ln=Eu, Tb) are obtained by a sol‐gel process. For comparison, binary lanthanide SBA‐15 and SBA‐16 mesoporous hybrid materials (denoted as Ln(DBM‐SBA‐15)₃ and Ln(DBM‐SBA‐16)₃) are also synthesized. The luminescence properties of these resulting materials are characterized in detail, and the results reveal that ternary lanthanide mesoporous polymeric hybrid materials present stronger luminescence intensities, longer lifetimes, and higher luminescence quantum efficiencies than the binary lanthanide mesoporous hybrid materials. This indicates that the introduction of the organic polymer chain is a benefit for the luminescence properties of the overall hybrid system. In addition, the SBA‐15 mesoporous hybrids show an overall increase in luminescence lifetime and quantum efficiency compared with SBA‐16 mesoporous hybrids, indicating that SBA‐15 is a better host material for the lanthanide complex than mesoporous silica SBA‐16.     

Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Controlling the shape and alignment of mesopores by confinement in colloidal crystals: designer pathways to silica monoliths with hierarchical porosity

Monolithic pieces of hierarchically structured silica, containing both periodic macropores and mesopores with well-controlled architecture, are synthesized by dual templating methods. Colloidal crystal templating with close-packed arrays of poly(methyl methacrylate) spheres yields regular, highly interconnected macropores a few hundred nanometers in diameter, and templating with nonionic surfactants produces mesoporosity (2.5-5.1 nm pore diameters) in the macropore walls. Several distinct mesostructures can be achieved within the silica skeleton, depending on the choice of surfactant, co-surfactant, and processing conditions. In the three-dimensional (3D) confinement of the colloidal crystal template, wormlike channels, cubic (Pm3n), or two-dimensional (2D) hexagonal (P6mm) mesostructures are produced with the surfactant Brij 56 (C16H33(OCH2CH2)nOH (n approximately 10) and dodecane as cosurfactant. In the 2D hexagonal structure, channels are oriented perpendicular to the polymer spheres, thereby connecting adjacent macropores through the silica walls. This orientation contrasts with channel alignment parallel to latex spheres when the polymeric surfactant Pluronic P123 (EO20PO70EO20) is used. On the basis of high-resolution 3D transmission electron microscopy, scanning electron microscopy, small-angle X-ray scattering, and nitrogen sorption measurements, structural and textural properties of the monoliths are described in detail as a function of the synthesis parameters. The control over the mesoarchitecture of these silica-surfactant systems in 3D confinement is explained by considering the relative dimensions of the mesostructures with respect to the interstitial space in the latex template, interfacial interactions, entropic effects, and structural frustration.     

Rotational diffusion of organic solutes in surfactant-block copolymer micelles: role of electrostatic interactions and micellar hydration

Rotational diffusion of a cationic solute rhodamine 110 and a neutral solute 2,5-dimethyl-1,4-dioxo-3,6-diphenylpyrrolo[3,4-c]pyrrole, DMDPP has been examined in the surfactant-block copolymer system of sodium dodecyl sulfate (SDS) and poly(ethylene oxide)20-poly(propylene oxide)70-poly(ethylene oxide)20 (P123). In this study, the mole ratio of SDS to P123 was varied from 0 to 5 in steps of one unit, to investigate the role of electrostatic interactions and micellar hydration on solute rotation. It has been noticed that there is a significant enhancement in the average reorientation time of rhodamine 110, when [SDS]/[P123] increased from 0 to 1. This has been rationalized on the basis of migration of rhodamine 110 from the interfacial region of P123 micelles to the palisade layer (corona region) due to the electrostatic interaction with negatively charged head groups of SDS, whose tails are embedded in the polypropylene oxide core. Further increase in the mole ratio of SDS to P123 has resulted in only a marginal decrease in the average reorientation time of rhodamine 110, which is probably due to the solute molecule experiencing a microenvironment similar to the interfacial region of SDS micelles. In contrast, a gradual decrease has been observed in the average reorientation time of DMDPP with [SDS]/[P123], which is due to the increase in hydration levels in the palisade layer (corona region) of the micelle. These explanations are consistent with the structure of the SDS-P123 micellar system that has been deduced from neutron scattering and viscosity measurements recently.     

A dielectric study of the amorphous fraction in oriented nylon 610

Since some dielectric loss peaks can be assigned to amorphous phase motions, it would appear that dielectric measurements should be a good probe to study the effects of macroscopic plastic deformation on the structure of the amorphous phase. We report here results of measurements of dielectric constant and loss in nylon 610 measured both parallel (∥) to and perpendicular (⊥) to the extrusion direction in specimens prepared by extrusion through a die at 160°. It is found that the intensity of the (∥) loss was nearly zero and the (⊥) loss intensity was greatly reduced compared to unoriented material. The other relaxation parameters (loss width and location) were largely unaffected. Since the amide dipole is nearly perpendicular to the chain axis and alternates in direction in the extended conformation, a considerable degree of chain alignment parallel to the draw direction is indicated. These results therefore show considerable permanent amorphous phase orientation even though the deformation was carried out 100° above its glass temperature.     

Self-assembly of star ABC triblock copolymer thin films: self-consistent field theory

Microphase separation and morphology of star ABC triblock copolymers confined between two identical parallel walls (symmetric wetting or dewetting) are investigated with self-consistent field theory (SCFT) combined with the "masking" technique to describe the geometric confinement of the films. In particular, we examine the morphology of confined near-symmetric star triblock copolymers under symmetric and asymmetric interactions as a function of the film thickness and the surface field. Under the interplay between the degree of spatial confinement, characterized by the ratio of the film thickness to bulk period, and surface field, the confined star ABC triblock copolymers are found to exhibit a rich phase behavior. In the parameter space we have explored, the thin film morphologies are described by four primary classes including cylinders, perforated lamellae, lamellae, and other complex hybrid structures. Some of them involve novel structures, such as spheres in a continuous matrix and cylinders with alternating helices structure, which are observed to be stable with suitable film thickness and surface field. In particular, complex hybrid network structures in thin films of bulk cylinder-forming star triblock copolymers are found when the natural domain period is not commensurate with the film thickness. Furthermore, a strong surface field is found to be more significant than the spatial confinement on changing the morphology of star triblock copolymers in bulk. These findings provide a guide to designing novel microstructures involving star triblock copolymers via geometric confinement and surface fields.     

Hierarchically porous titania thin film prepared by controlled phase separation and surfactant templating

Poly(propylene glycol) (PPG) of moderately high molecular weight (M(n) = 3500 Da) exhibits amphibious behavior in aqueous solution in that it is hydrophilic at low temperature but hydrophobic at high temperature. This property is utilized to generate porous titania thin films with a hierarchical structure consisting of macroporous voids/cracks in films with mesoporous walls. The smaller mesopores result from the self-assembly of the Pluronic block copolymer P123 to form micellar templates in well-ordered arrays with hexagonal symmetry. The larger pores are generated from the phase separation of PPG during aging of the films. The PPG acts to a limited degree as a swelling agent for the P123 micelles, but because the films are aged at a low temperature where PPG is hydrophilic, much of the PPG remains in the polar titania phase. Upon heating, the PPG phase separates to form randomly dispersed, large pores throughout the film while retaining the ordered mesoporous P123-templated structure in the matrix of the material. TEM and SEM imaging confirm that calcined titania thin films have interconnected hierarchical porous structures consisting of ordered mesopores 4-12 nm in diameter and macroporous voids >100 nm in size. The density and size of the voids increase as more PPG is added to the films.     

Excitation wavelength dependence of solvation dynamics in a supramolecular assembly: PEO-PPO-PEO triblock copolymer and SDS

The triblock copolymer (PEO)20-(PPO)70-(PEO)20 (P123) forms a supramolecular aggregate with sodium dodecyl sulfate (SDS). The solvation dynamics and anisotropy decay of coumarin 480 (C480) in different regions of a P123-SDS aggregate are studied through variation of the excitation wavelength (lambdaex) using femtosecond upconversion. In a P123 micelle, because of the drastic differences in polarity between the hydrophilic corona region (PEO block) and the hydrophobic PPO core, C480 exhibits a pronounced red edge excitation shift (REES) of emission maximum by 24 nm. In the P123-SDS aggregate, SDS penetrates the core of the P123 micelle. This increases the polarity of the core and reduces the difference in the polarity between the core and the corona region. In a P123-SDS aggregate, the REES is much smaller (5 nm) which suggests a reduced difference between the core and the corona. Solvation dynamics in a P123 micelle displays a bulklike ultrafast component (<0.3 and 1 ps) in the PEO corona region, a 200 ps component arising from dynamics of polymer segments, and a very long component (5000 or 3000 ps) due to the highly restricted PPO core. In a P123-SDS aggregate, at lambdaex = 375 and 405 nm, the solvation dynamics is found to be faster than that in P123 micelle. In this case, the component (3000 ps) arising from the core region is faster than that (5000 ps) in P123 micelle. In both P123 micelle and P123-SDS aggregate, the relative contribution of the core region decreases and that of the corona region increases with an increase in lambdaex. At lambdaex = 435 nm, which probes the hydrophilic corona, the solvation dynamics for both P123 micelle and P123-SDS aggregate are almost similar.     

Separation of membrane proteins by two-dimensional electrophoresis using cationic rehydrated strips

Due to their poor solubility during IEF membrane proteins cannot be separated and analyzed satisfactorily with classical 2-DE. A more efficient method for such hydrophobic proteins is the benzyldimethyl-n-hexadecylammonium chloride (16-BAC)/SDS-PAGE, but the corresponding protocol is intricate and time-consuming. We now developed an easy-to-handle electrophoresis method in connection with a novel device which enables reproducible separation of ionic solubilized membrane proteins using individually rehydrated plastic sheet gel strips. These strips are suitable for the first dimension in a 2-D 16-BAC/SDS system and can be handled easily; this is demonstrated by the separation of membrane proteins of human embryonic kidney (HEK293) cells.     

Influence of different templates on the morphology of mesoporous aluminas

Mesoporous alumina has many environmental applications as catalysts support and adsorption or separation material. We studied the synthesis conditions for the mesoporous alumina formation from aluminum isopropoxide in the presence of anionic (lauric and stearic acid), cationic (cetyltrimethylammonium bromide, CTAB) and non-ionic (triblock poly(ethylene oxide)-poly(propylene oxide)-polyethyleneoxide, P123) templates. The X-ray diffraction data show that the alumina mesophases obtained at 550°C in the presence of fatty acids or P123 have amorphous walls, whereas the samples prepared at 500°C by using CTAB, in alkaline medium are crystalline with a γ-alumina structure. The solvothermal treatment caused the alumina mesophase with crystalline walls to be obtained at 550°C. The samples were investigated by nitrogen adsorption-desorption isotherms and scanning electron microscopy. The obtained alumina mesophases have specific surface areas in the range of 300–450 m² g⁻¹, narrow pore size distribution, and different morphology depending on the template used in the synthesis.      

Evolution in surface morphology during rapid microwave annealing of PS‐b‐PMMA thin films

Microwave annealing enables rapid (60 s) ordering and orientation of block copolymer films. The developed morphology in polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA) thin films depends on details of the heating rate that is controlled by microwave output energy as well as the sample location in the microwave. Over a wide heating rate (1.1–2.7 °C/s), perpendicular orientation of the cylindrical mesostructure at the surface is >50% after 60 s, but goes through a maximum at 1.8 °C/s leading to approximately 97% perpendicular cylinders at the surface. The propagation of this perpendicular surface morphology through the film thickness is also dependent upon the microwave annealing conditions. The surface structure evolves with the microwave annealing time from imperfect ordering to perpendicular cylinders to parallel cylinders as the annealing time increases. This work demonstrates the importance of controlling the heating rate during microwave annealing, which will be critical for optimizing microwave conditions for directed self‐assembly. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1499–1506     

Quantitative peptidomics of mouse pituitary: comparison of different stable isotopic tags

Determining the relative levels of neuropeptides in two samples is important for many biological studies. An efficient, sensitive and accurate technique for relative quantitative analysis involves tagging the peptides in the two samples with isotopically distinct labels, pooling the samples and analyzing them using liquid chromatography/mass spectrometry (LC/MS). In this study, we compared two different sets of isotopic tags for analysis of endogenous mouse pituitary peptides: succinic anhydride with either four hydrogens or deuteriums and [3-(2,5-dioxopyrrolidin-1-yloxycarbonyl)propyl]trimethylammonium chloride with either nine hydrogens or deuteriums. These two labels react with amines and impart either a negative charge (succinyl) or a positive charge (4-trimethylammoniumbutyryl (TMAB)). Every endogenous mouse pituitary peptide labeled with the light TMAB reagent eluted from the C18 reversed-phase column at essentially the same time as the corresponding peptide labeled with the heavy reagent. Most of the peptides labeled with succinyl groups also showed co-elution of the heavy- and light-labeled forms on LC/MS. The mass difference between the heavy and light TMAB reagents (9 Da per label) was larger than that of the heavy and light succinyl labels (4 Da per label), and for some peptides the larger mass difference provided more accurate determination of the relative abundance of each form. Altogether, using both labels, 82 peptides were detected in Cpe(fat/fat) mouse pituitary extracts. Of these, only 16 were detected with both labels, 41 were detected only with the TMAB label and 25 were detected only with the succinyl label. A number of these peptides were de novo sequenced using low-energy collisional tandem mass spectrometry. Whereas the succinyl group was stable to the collision-induced dissociation of the peptide, the TMAB-labeled peptides lost 59 Da per H9 TMAB group. Several peptides identified in this analysis represent previously undescribed post-translational processing products of known pituitary prohormones. In conclusion, both succinyl and TMAB isotopic labels are useful for quantitative peptidomics, and together these two labels provide more complete coverage of the endogenous peptides. Copyright (c) 2005 John Wiley & Sons, Ltd.