Electron capture ion mobility spectrometry for the selective detection of chlorinated and brominated species after capillary gas chromatography

This paper reports the first investigation of electron capture ion mobility spectrometry as a detection method for capillary gas chromatography. In previous work with negative ion mobility detection after gas chromatography, the principal reactant ion species were O₂^? or hydrated O₂^? due to the presence of oxygen in the drift gas. These molecular reactant ions have a mobility similar to chloride and bromide ions, which are the principal product ions formed by most halogenated organics via dissociative ion-molecule reactions. Oxygenated reactant ions thus interfere with the selective detection of chloride and bromide product ions. A recently described ion mobility detector design efficiently eliminated ambient impurities, including oxygen, from infiltrating the ionization region of the detector; consequently, in the negative mode of operation, the ionization species with N₂ drift gas were thermalized electrons. Thermalized electrons have a high mobility and their drift time occupies a region of the ion mobility spectrum not occupied by chloride, bromide, or other product ions. The result was improved selectivity for halogenated organics which ionize by dissociative electron capture. This was demonstrated by the selective detection of 4,4′-dibromobiphenyl from the components of a polychlorinated biphenyl mixture (Aroclor 1248).     

Preferential adsorption of cationic surfactant mixture studied by bromide ion selective total-reflection XAFS measurement

The total-reflection XAFS measurement possessing bromide ion selectivity at the interfacial region was applied to the adsorbed film of hexadecyltrimethylammonium chloride (HTAC) and dodecyltrimethylammonium bromide (DTAB) mixture. The surface compositions XjH of individual ions j ( j = HTA+, Cl(-), DTA+, and Br (-)) were evaluated by combining the surface excess concentration of Br(-) estimated from the XAFS with the surface composition of the respective surfactants from the surface tension results. It is clearly shown that HTA+ and Br(-) are preferentially adsorbed to DTA+ and Cl(-) at the air/water interface. The preferential adsorption was estimated numerically in terms of activity coefficient fi+/-(H,p) of component i and excess Gibbs energy of adsorption ?prH,E. Then, the magnitude of ?prH,E was compared with that of ?prH,E attributable to intrinsic interaction between ions.     

Explicit water molecular dynamics study of the mobility of halide ions in presence of ionene oligocations

We present explicit water molecular dynamics simulations of solutions of aliphatic 3,3- and 6,6-ionene oligocations neutralized with (i) fluoride, chloride, bromide, or iodide counterions, respectively, or (ii) with a 1:1 mixture of chloride and bromide anions in presence of a low molecular weight salt at 298 K. The SPC/E model was used to describe water molecules. Results of the simulation are presented in form of the pair distribution functions between various atoms on the ionene oligoion and counterions in solution. In addition, we were interested in the dynamics of counterions around model ionenes. We showed that counterions residing in the vicinity of the oligoion exchange rapidly with those in the bulk solution, with the frequency depending on the nature of the counterion and on the charge density of the oligoion. We calculated the average residence times of the various counterion species to the oligoions and proposed the model which divides the counterions into "free" and "bound" and calculated the fraction of "free" counterions. In the second part of the study, we investigated interaction of the sodium chloride and sodium bromide, being simultaneously present in the solution, with differently charged ionenes in water. The selectivity effect was clearly observed: bromide ions tend to replace chloride ions in the immediate vicinity of the ionene oligoions. Simulation results are discussed in light of our recent measurements of thermodynamic and transport properties of aqueous ionene solutions.     

Anion‐binding properties of two calix[4]arene derivatives containing two ferrocene imine or ferrocene amine units at the upper rim

Calix[4]arene derivatives containing ferrocene units at the upper rim have been synthesized and their anion‐binding and sensing investigated towards anions such as chloride, bromide and hydrogen sulfate by cyclic voltammetry. Electrochemical studies show that these redox‐active ligands electrochemically recognize chloride and bromide anions. These compounds have excellent selectivity for chloride and bromide ions, in the comparison with hydrogen sulfate anion. With ferrocenyl Schiff base calix[4]arene 1 an anodic shift as large as 302 mV is observed on addition of four equivalents of Cl⁻ anion. Also electrochemical and UV–vis spectroscopic titrations ferrocenyl calix[4]arene derivatives 1 with chloride and bromide ions and 2 (only with Cl⁻) indicate a 1:1 binding‐stiochiometry. Copyright © 2011 John Wiley & Sons, Ltd.     

Variability of selectivity coefficients of solid-state ion-selective electrodes

The generalized model for the selectivity mechanism of solid-state ion-selective electrodes has been experimentally verified. The experimental parameters investigated were the concentration of interfering ion, temperature and stirring. Among the systems studied were electrodes sensitive to chloride (bromide, iodide), bromide (chloride, iodide), iodide (chloride, bromide), silver (copper, lead), copper (silver, lead) and lead (silver, copper), the species given in brackets being considered as the interferents. The model has been confirmed except for cases where the concentration of ions formed at the electrode surface by metathesis is too small to be the factor that dictates the electrode potential.     

Studies On The Use Of Halide Ion Selective Electordes In Salt Media And The Extension Of The Generalized Standard Addition method To Determine The Concentration Of Halide Ions In Geothermal Brins

Abstract

The effect of chloride on the bromide and iodide solid state precipitate electrodes is studied and selectivity constants calculated. The use of multiple linear regression analysis to determine the initial concentration of halide ions in solutions is studied and the resulting technique is used to determine fluoride, iodide and bromide in a geothermal-geopressured brine.     

Reaction of benzyl chloride with ammonium sulfide under liquid–liquid phase transfer catalysis: Reaction mechanism and kinetics

The reaction between benzyl chloride and aqueous ammonium sulfide was carried out in an organic solvent – toluene, using tetrabutylammonium bromide (TBAB) as phase transfer catalyst (PTC). Two products, namely dibenzyl sulfide (DBS) and benzyl mercaptan (BM), were identified in the reaction mixture. The selectivity of DBS was maximised by changing various parameters such as NH₃/H₂S mole ratio, stirring speed, catalyst loading, concentration of benzyl chloride, volume of aqueous phase, and temperature. The highest selectivity of DBS obtained was about 90% after 445 min of reaction with excess benzyl chloride at 60 °C. Complete conversion of benzyl chloride could be achieved at the cost of very low selectivity of DBS and very high selectivity of BM. The apparent activation energy for the kinetically controlled reaction was found to be 12.3 kcal/mol. From the detailed study of the effects of various parameters on the reaction, a suitable mechanism was established which could explain the course of the reaction.     

Detection of Quaternary Ammonium Drugs in Equine Urine by Liquid Chromatography-Mass Spectrometry

Quaternary ammonium drugs are anticholinergic agents and some of which have been known to be abused in equine sports. A general screening method for this class of drugs in equine urine by liquid chromatography-mass spectrometry (LC-MS) has not been reported. The paper describes an efficient LC-MS-MS method for the simultaneous detection and confirmation of twenty quaternary ammonium drugs at low ng mL^?1 in equine urine after solid-phase extraction. Quaternary ammonium drugs were extracted from equine urine by solid-phase extraction using ISOLUTE^® CBA SPE Columns and analysed by LC-MS-MS in the positive electrospray ionisation mode. Separation of twenty quaternary ammonium drugs (the quaternary ammonium ions of edrophonium chloride, pyridostigmine bromide, neostigmine bromide, bretylium tosylate, ipratropium bromide, tubocurarine chloride, N-butylscopolammonium bromide, mepenzolate bromide, rocuronium bromide, clidinium bromide, pipenzolate bromide, isopropamide iodide, glycopyrronium bromide, alcuronium chloride, oxyphenonium bromide, propantheline bromide, tridihexethyl chloride, vecuronium bromide, mivacurium chloride and pancuronium bromide) was achieved in a reversed phase column with a mixture of aqueous ammonium formate (pH 3.0, 10 mM) and acetonitrile as the mobile phase. Detection and confirmation of the twenty quaternary ammonium drugs at about 5 ng mL^?1 in equine urine could be achieved within 22 min using product-ion scan MS-MS. The target analytes were detected by examination of extracted-ion chromatograms of their product ions. Drugs spiked in different equine urine (n = 15) were consistently detected. Negative samples (n = 30) of normal post-race equine urine have also been analysed, no matrix interference at the targeted masses and retention times was observed. The method was successfully applied to the analyses of drug-administration samples. Other method validation data including reproducibility and recovery will also be presented. An LC-MS-MS method for the simultaneous detection and confirmation of twenty quaternary ammonium drugs in equine urine was developed. The methodology should be applicable to other biological matrices such as human urine.     

Novel Bromide PVC‐Based Membrane Sensor Based on Iron(III)‐Salen

A novel bromide PVC‐based membrane sensor, based on iron(III)‐salen (IS) as an electroactive material, is successfully developed. The sensor possesses the advantages of low detection limit (6.0×10^?6), wide working concentration range (7.0×10^?6–1.0×10^?1 M), Nernstian behavior (slope of 59.0±0.5 mV per decade), low response time (<15 s), wide working pH range (3–9), and specially, high bromide selectivity over a wide variety of organic and inorganic anions, specially iodide, chloride, and hydroxide ions. The electrode was used in the direct potentiometric determination of hyoscine butylbromide, and as an indicator electrode in potentiometric titration of bromide ions with silver ions.     

Exploiting the Catenane Mechanical Bond Effect for Selective Halide Anion Transmembrane Transport

The first examples of [2]catenanes capable of selective anion transport across a lipid bilayer are reported. The neutral halogen bonding (XB) [2]catenanes were prepared via a chloride template-directed strategy in an unprecedented demonstration of using XB⋅⋅⋅anion interactions to direct catenane assembly from all-neutral components. Anion binding experiments in aqueous-organic solvent media revealed strong halide over oxoanion selectivity, and a marked enhancement in the chloride and bromide affinities of the catenanes relative to their constituent macrocycles. The catenanes additionally displayed an anti-Hofmeister binding preference for bromide over the larger iodide anion, illustrating the efficacy of employing sigma-hole interactions in conjunction with the mechanical bond effect to tune receptor selectivity. Transmembrane anion transport studies conducted in POPC LUVs revealed that the catenanes were more effective anion transporters than the constituent macrocycles, with high chloride over hydroxide selectivity, which is critical to potential therapeutic applications of anionophores. Remarkably these outperform existing acyclic halogen bonding anionophores with regards to this selectivity. Record chloride over nitrate anion transport selectivity was also observed. This represents a rare example of the direct translation of intrinsic anion binding affinities to anion transport behaviour, and demonstrates the key role of the catenane mechanical bond effect for enhanced anion transport selectivity.     

Determination of the Selectivity of Electrodes Made of a Mixture of Nonstoichiometric Silver and Copper(I) Sulfides in the Analysis of Sulfur-Containing Aqueous Solutions

The possibility of using electrodes made of a mixture of nonstoichiometric silver and copper(I) sulfides in the analysis of sulfur-containing aqueous solutions by direct potentiometry and potentiometric titration was assessed. The selectivity coefficients of the electrodes under study to chloride and iodide ions were determined. The effect of pH on the performance and conductivity of electrodes was studied.     

Isomerization of endo-tetrahydrodicyclopentadiene over clay-supported chloroaluminate ionic liquid catalysts

Various halide salts with different alkyl lengths were allowed to intercalate into the layer structure of sodium montmorillonite clay through an ion exchange reaction. Intercalation of 1-hexadecyl-3-methylimidazolium chloride, hexadecyltrimethylammonium bromide, dihexadecyldimethylammonium bromide, and tributylhexadecylphosphonium bromide could expand the spacing of the silicate layers from 12 to 37–41 Å (measured by X-ray diffraction). The modified clays were pretreated with the pyridine hydrochloride/AlCl₃ mixture and used for suitably supporting a chloroaluminate ionic liquid catalyst for the isomerization of endo-tetrahydrodicyclopentadiene into the corresponding exo-isomer. Nearly quantitative conversion to the desired product and nearly quantitative selectivity were observed for the newly developed clay-supported ionic liquid catalysts, which were proven to be recyclable.     

A Potentiometric Multisensor System of Anion-Selective Electrodes Based on Ionic Liquids

The possibility of using solid-state and liquid PVC-membrane electrodes based on ionic liquids to design a potentiometric multisensor system is assessed. Ionic liquids with 1,3-dihexadecylimidazolium cation and chloride, bromide, iodide, and nitrate anions are used. The sensitivity parameters of the sensors are determined. A multisensor array is applied to detect chloride and iodide anions in the multicomponent mixture. The designed system is used to discriminate between mineral waters of different compositions by applying the method of principal component analysis (PCA).     

The determination of bromide in a local anaesthetic hydrochloride by capillary electrophoresis using direct UV detection

The determination of residual amounts of bromide in a local anaesthetic hydrochloride by capillary electrophoresis was developed. Direct UV detection at 200 nm was used for the determination of the bromide content. The separation capacity of the system must be sufficient when bromide is determined in the presence of a large excess of chloride since electromigration dispersion of the highly concentrated chloride peak may impair the resolution. The background electrolyte (BGE) contained both acetonitrile and methanesulphonic acid in order to improve the selectivity and minimise the electromigration dispersion. The system was optimised with respect to resolution of the chloride and the bromide peaks by statistical experimental design using a multivariate optimisation program. The developed method was validated in accordance with the ICH guidelines and proved to be suitable for its intended use.     

Ruthenium(III) Schiff's Base Complex as Novel Chloride Selective Membrane Sensor

A novel chloride PVC‐based membrane sensor based on a ruthenium(III) Schiff's base complex, as an excellent neutral carrier, has been developed. The ruthenium complex, in combination with a ketonic plasticizer and a cationic additive led to ISEs with fundamental characteristics, such as slope sensitivity, short response times and selectivity coefficients, which were sufficient for practical applications. The sensor with composition of 30% PVC, 62% benzyl acetate, 5% ruthenium(III) Schiff's base complex and 3% hexadecyltrimethyl ammonium bromide displays near‐Nernstian behavior in a wide concentration range (1.0×10^?1–3.0×10^?6 M with slope of ?54.5±0.5) with a detection limit of 2.0×10^?6 M (71.0 ng per mL). The response of the electrode is independent on pH in the range of 4.0–10.0 and can it be used for at least ten weeks. The proposed electrode shows a very short response time (<20 s) in whole concentration range. The sensor displays high selectivity toward chloride ions over several organic and inorganic anions. It was successfully applied for the determination of chloride in serum samples. It was also used as an indicator electrode in the potentiometric titration of chloride ions with silver nitrate solution.     

Calix[4]pyrroles bearing quinolinium moiety for halide sensing in aqueous solution

Sensing of chloride in aqueous solution with high selectivity is a challenging task and has a great potential for cellular imaging and analytical applications in food chemistry. Supramolecular binding motif calix[4]pyrrole has been conjugated with a known fluorescent probe for chloride – a quinolinium dye - through conformationally flexible and rigid linkers. Effects of the supramolecular host on the properties of the fluorescent dye and vice versa have been investigated by NMR, X-ray crystallographic and spectroscopic methods. New fluorescent probes have demonstrated better binding and quenching properties towards chloride, bromide and iodide in a 1:1 water-methanol mixture as compared to free calix[4]pyrrole and the quinolinium dye.     

Effect of preferential adsorption on the synergism of a homologous cationic surfactant mixture

To evaluate the effect of preferential surface adsorption of bromide ions on the synergism of homologous cationic surfactant mixtures reported previously, the surface tension of the aqueous solutions of the hexadecyltrimethylammonium chloride (HTAC)-dodecyltrimethylammonium bromide (DTAB) system was measured as a function of the total molality of surfactants and the relative proportion of DTAB at 298.15 +/- 0.05 K under atmospheric pressure. The excess Gibbs energies calculated from them were -2.6 kJ mol(-)(1) in the mixed adsorbed film and -2.0 kJ mol(-)(1) in the mixed micelle, respectively. A useful analytical procedure to evaluate the composition of individual ions (hexadecyltrimethylammonium, dodecyltrimethylammonium, chloride, and bromide ions) in the adsorbed film and micelle was developed and applied.     

Development of a Chloride Ion‐Selective Solid State Sensor Based on Doped Polypyrrole‐Graphite‐Epoxy Composite

This paper reports the development and characterization of a solid state potentiometric sensor for chloride ions, based on doped polypyrrole‐graphite‐epoxy composite. The optimum mixture proportion found for polypyrrole:graphite was 60 : 40 meanwhile a 50 : 50 proportion was used for the polypyrrol+graphite:epoxy mixture. The stabilization time was approximately 16 min, while the response times varied within 2 and 23 s. The sensor displayed a sensitivity of 58 mV/decade [Cl^?], and 3×10^?6 M detection limit. The selectivity coefficients showed a greater selectivity to that reported for commercial‐type sensors. The statistical analysis for chlorides' determination in commercial saline serums did not show significant differences respect to data reported by the manufacturers.     

Peculiarities of nucleophilic substitution in indolyliodonium salts

3-Indolylphenyliodonium trifluoroacetate reacts with ammonium bromide and lithium chloride and bromide to give 3-haloindoles. The reaction with ammonium chloride and tetrabutylammonium chloride leads to a mixture of 2- and 3-chloroindoles. The same mixture of chloroindoles is also formed by the action of lithium chloride but in the presence of 15-crown-5 ether. The course of the reaction is explained by ambident reaction of the cation of the iodonium salt.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1494–1496, November, 1981.     

Pyreno[2,1-b]pyrrole and bis(pyreno[2,1-b]pyrrole) as selective chemosensors of fluoride ion: a mechanistic study

Pyreno[2,1-b]pyrrole and its dimeric derivative display excellent selectivity and sensitivity for detection of fluoride ion, in comparison with chloride, bromide, iodide, acetate, dihydrogen phosphate, hydrogen sulfate, perchlorate, nitrate, and thiocyanate ions. The hydrogen bonding with fluoride ion, both in formation and in subsequent dissociation, provides remarkable colorimetric and fluorescent changes in the visible region that are advantageous for real-time and on-site application. Detailed NMR and dynamic fluorescence spectroscopic analyses establish the associated mechanism.