Theoretical study on transport properties of a BN co-doped SiC nanotube

We investigate the electronic transport properties of silicon carbide nanotubes (SiCNT) in presence of both boron (B) and nitrogen (N) impurities. The results show that co-doping BN impurities suppresses the important negative differential resistance (NDR) property. NDR suppression is attributed to the introduction of new electronic states near the Fermi level followed by weak orbital localization. BN co-doping results in exponential current-voltage (I-V) characteristics which is in contrast to linear I-V characteristics for individual boron and nitrogen doped SiCNTs. HOMO has no contribution from B impurity, whereas, LUMO has contribution from N impurity at low and high bias.     

Adsorption of mercaptopurine drug on the BN nanotube,nanosheet and nanocluster: a density functional theory study

ABSTRACT

We have investigated the interaction of mercaptopurine (MP) drug with BN nanotube, nanosheet and nanocluster using density functional theory calculations in the gas phase, and aqueous solution. We predicted that the MP drug tends to be physically adsorbed on the surface of BN nanosheet with an adsorption energy (E_ad) about ?3.2?kcal/mol. The electronic properties of BN nanosheet are not affected by the MP drug, and this sheet is not a sensor. But the electronic properties of BN nanotube and nanocluster are significantly sensitive to this drug in both gas phase, and aqueous solution. The BN nanocluster suffers from a long recovery time (8.8?×?10⁸?s) because of a strong interaction (E_ad?=??28.6?kcal/mol), and this cluster is not a proper sensor for MP detection. But the BN nanotube benefits from a short recovery time about 49.5?s at room temperature, and may be a promising candidate for application in the MP sensors. The water solvent decreases the strength of interaction between the BN nanotube, and MP drug, but it does not affect the electronic sensitivity of the nanotube sensibly.     

Electron transport through molecular wire: effect of isomery

We report the electronic transport property of molecular wires by an ab inito molecular orbital theory on the basis of the first-principle density functional theory (DFT) and the non-equilibrium Green's function (NEGF) formalism. The wires consist of three kinds of isomer molecules (pyrimidine, pyrazine and pyridazine, shown in the first figure) which are attached to the atomic scale gold electrodes. Our calculation reveal: (1) the relative position of the double nitrogen atoms in the molecular rings can significantly affect the transport behavior due to change in the electronic structure of the molecule and (2) the conductance of pyrazine exhibits an ohmic character on a large range.     

A DFT study of 5-fluorouracil adsorption on the pure and doped BN nanotubes

The electronic and adsorption properties of the pristine, Al-, Ga-, and Ge-doped BN nanotubes interacted with 5-fluorouracil molecule (5-FU) were theoretically investigated in the gas phase using the B3LYP density functional theory (DFT) calculations. It was found that the adsorption behavior of 5FU molecule on the pristine (8, 0) and (5, 5) BNNTs are electrostatic in nature. In contrast, the 5FU molecule (O-side) implies strong adsorption on the metal-doped BNNTs. Our results indicate that the Ga-doped presents high sensitivity and strong adsorption with the 5-FU molecule than the Al- and Ge-doped BNNTs. Therefore, it can be introduced as a carrier for drug delivery applications.     

Effects of atomic-scale contacts on transport properties through single molecules - ab initio study

Using the RTM/NEGF method, which is a first-principles calculation tool for the quantum transport through nanostructures between electrodes, we study the effects of atomic-scale contacts on the transport properties through single molecules. Electronic states and current-voltage (I-V) characteristics are investigated in various contact conditions with and without single molecules between electrodes. We find that similar nonlinear behaviors appear in the I-V characteristics. Such nonlinear behaviors are determined not only by the HOMO-LUMO electronic states of single molecules between electrodes, but also by the atomic-scale contact conditions. We show that the transitions from tunneling to ballistic regimes affect the I-V characteristics significantly.     

A comparative study of electron transport in benzene molecule covalently bonded to gold and silicon electrodes for pioneering the electron transport properties of silicon quantum dot-molecule hybrid polymers

In order to pioneer the electron transport properties of silicon (Si) quantum dot-molecule hybrid polymers, we investigate the electron transport properties of the benzene molecule in silicon (Si) semiconductor electrodes, based on nonequilibrium Green's function (NEGF) method coupled with density functional theory (DFT), in comparison with conventional gold (Au) metal electrodes, with three different anchoring linker groups: thiol for dithiol-benzene (DTB), methylene for dimethyl-benzene (DMB), and direct bonding for benzene (Ph). It is interestingly found that, due to band gap nature of the Si semiconductor electrodes, the molecular junctions with the Si electrodes show no current up to the bias voltage of around 0.8 V. In addition, the DTB molecular junctions in the Si semiconductor electrodes connected with Si–S bond show higher conducting properties than other DMB and Ph molecular junctions directly coupled to the electrodes with the Si–C bonds (DMB < Ph < DTB). The electron transport properties of the molecules in the two different electrodes are analyzed on the basis of the understanding transmission spectra, projected density of states (PDOS), and molecular orbitals. We believe that the use of thiol linker may open new possibility in the molecular electronics with the Si semiconductor electrodes and the Si QD-molecule hybrid polymers concept.     

Theoretical study of HOCl adsorption on ice surface

Adsorption of HOCl on ice surface was studied using the ab initio molecular orbtial theory. We applied Hartree–Fock (HF) self-consistent field and the second-order Møller–Plesset (MP2) level of theory to cluster models of the (0001) surface ice Ih to optimize adsorption structures and binding energies. In all stable binding configurations, HOCl acts as a proton donor in a hydrogen bond. The presence of neighboring water molecules can strengthen the interaction of HOCl with ice. In the HOCl·(H₂O)₄ system, interaction hydrogen bond length is about 1.85 Å, and binding energies are −10.063−11.149 kcal mol⁻¹. We also calculated the vibrational frequencies of HOCl affected by the ice surface.     

Rectification effect about vacuum separating carbon nanotube bundle predicted by first-principles study

For the molecular spintronics transport systems, we propose that the spin current rectifier can be constructed using the nonmagnetic lead. The proposal is confirmed according to the first-principles study of the transport characteristics of a vacuum separating (15,0)$(15,0)$ carbon nanotube bundle where only one zigzag edge is hydrogenated. The strong rectification effect for spin (charge) current is obtained in the case of the magnetic parallel (anti-parallel) configuration of two zigzag edges. Our investigations indicate that such device can be used as the spin filter and the counterpart of the p–n$p\text{–}n$ junction in the field of molecular electronics.     

Comparative study on transport properties and scattering mechanism of group III doped SiC nanotube

The third group of elements is the acceptor of P-type silicon carbide (SiC). Therefore, studying the transport properties of group III doped SiC nanotube (SiCNTs) and revealing the carrier scattering mechanism have important scientific significance for improving the photoelectric properties and promoting the development of SiC nano-devices. In this article, the lattice structure and transport properties of IIIA-doped SiCNTs are investigated systematically using density functional theory. According to the first principle data, we calculate the temperature characteristics of the conductivity, carrier concentration, and mobility, then, analyze the contributions of optical phonon, ionized impurity, neutral impurity and inter-carrier scattering to the mobility. The calculation results show that the conductivity of IIIA-doped SiCNTs decreased with increasing temperature in the temperature range below 200 K, above 200 K, the conductivity increases with increasing temperature. The main scattering mechanisms are optical phonon scattering and neutral impurity scattering. In application, this results will help the selection of SiCNTs acceptor.     

The electronic and structural properties of BN and BP nano-cages interacting with OCN: A DFT study

The adsorption of OCN⁻ (cyanato anion) on boron nitride (B₁₂N₁₂ and B₁₆N₁₆) and boron phosphide nano-cages (B₁₂P₁₂ and B₁₆P₁₆) in terms of energetic, geometric, and electronic properties are studied using density functional theory calculations. Our study results indicated that the first OCN⁻ strongly prefers to be adsorbed from its N atom upon B atoms of the nano-cages than the O atoms of OCN⁻. These findings have been rationalized using frontier molecular orbitals and total electron density plots. The energy gap of the B₁₂P₁₂ is significantly reduced upon the adsorption of OCN⁻ compared to B₁₂N₁₂, thus leading to the increase in electrical conductance of nano-cage.     

Theoretical study of the transition metal ring functionalized tips of open-ended (5,5) boron nitride nanotube (BNNT)

The nanotube with open edges is an excellent candidate for designing efficient tip for atomistic scanning probes or field emission display (FED) devices. In the present work, we have studied the functionalization of an open-ended boron nitride nanotube (BNNT) with a series of transition metal rings and the effects on the properties of open-ended BNNT through density functional theory (DFT) calculations. The results show that the TM-BNNT complexes are energetically favorable. Moreover, it is found that the functionalization (a) significantly decreases the band gap of BNNT to different degrees, which might effectively modify the electronic properties of the open-ended BNNT; and (b) efficiently lowers the work function, which might improve the field emission properties. Our results might be helpful not only to design specific BNNT-based tips but also to further discuss the chemical vapor deposition (CVD) growth of BNNT on nanoparticles.     

Theoretical investigations on structural, elastic and electronic properties of thallium halides

Theoretical investigations on structural, elastic and electronic properties, viz. ground state lattice parameter, elastic moduli and density of states, of thallium halides (viz. TlCl and TlBr) have been made using the full potential linearized augmented plane wave method within the generalized gradient approximation (GGA). The ground state lattice parameter and bulk modulus and its pressure derivative have been obtained using optimization method. Young's modulus, shear modulus, Poisson ratio, sound velocities for longitudinal and shear waves, Debye average velocity, Debye temperature and Grüneisen parameter have also been calculated for these compounds. Calculated structural, elastic and other parameters are in good agreement with the available data.     

Ab initio calculations of transport properties of atomic bridges by the recursion-transfer-matrix method

We present an efficient self-consistent method for approaching quantum transport through atomic-scale structures. Using the recursion-transfer-matrix (RTM) method with a separable form of nonlocal pseudopotentials, scattering waves propagating between metallic electrodes through nano-bridged structures are efficiently calculated on the basis of the density-functional formalism. We performed calculations with this method of the conductance of Al atomic wires with various kinds of single atoms mixed at the contact to one electrode. We found that the transport properties are considerably affected by the bonding nature of the atom at the contact. The conductance is largely determined by the atomic species at the contact and does not change much as the length of the atomic wire increases.     

Effect of the dangling bond on the electronic and magnetic properties of BN nanoribbon

The effect of the dangling bond on the electronic and magnetic properties of BN nanoribbon with zigzag edge (ZBNNR) and armchair edge (ABNNR) have been studied using the first-principles projector-augmented wave (PAW) potential within the density function theory (DFT) framework. Though ZBNNR or ABNNR with H atom terminated at both edges is nonmagnetic semiconductor, the dangling bond induces magnetism for the ZBNNR with bare N edge, bare B edge, bare N and B edges, the ABNNR with bare N edge and bare B edge. However, the ABNNR with bare N and B edges is still nonmagnetic semiconductor due to the strong coupling of the dangling bonds of dimeric N and B atoms at the same edge. The magnetic moment of ZBNNR with bare N(B) edge is nearly half the magnetic moment of ABNNR with bare N(B) edge. Such a half relationship is also existed in the number of the dangling bond states appeared around the Fermi level in the band structures. Furthermore, the dangling bond states also cause both ZBNNR and ABNNR with bare N edge a transition from semiconducting to half-metallic and thus a completely (100%) spin-polarization, while cause both ZBNNR and ABNNR with bare B edge as well as ABNNR with bare N and B edges only a decrease in their band gap.     

Vacancies effect on the mechanical properties in B2 FeAl intermetallic by the first-principles study

ABSTRACT

The geometric structures, electronic and mechanical properties of the high vacancy concentration intermetallic FeAl (experimental value: 3.3 at.% at 1451?K) were investigated by first-principles calculations based on density functional theory. The FeAl structures of different vacancy concentration with minimum energy were addressed, which shows that vacancies of iron (V_Fe) are more favourable and tend to gather together. For mechanical properties, both Young's modulus and elastic constants show an overall downward trend as vacancy concentration increases, but increase abnormally with the vacancy concentration ranging from 3.7 at.% to 5.6 at.%. All can be explained by the strength of Al–Fe bond, in other words, the Al–Fe interaction. Interestingly enough, intermetallic FeAl shows a transfer from the brittle manner to ductile manner, which also behaves as an important feature of FeAl in experiments. All the mechanical properties agree well with experimental data, indicating the reasonable vacancy model of FeAl intermetallic.     

Determination of length scale parameters of strain gradient continuum theory for crystalline solids using a computational quantum mechanical model based on density functional theory

Although the classical continuum theory is advantageous in finding solutions to a wide range of engineering problems, it cannot describe some phenomena such as dispersion of acoustic waves, effects of surfaces and interfaces on the mechanical behavior of small-scale structures, and microstructure contribution in special materials. Owing to this fact, several enhanced continuum theories have evolved in the literature. However, the difficulty in determination of the length scale parameters that appear in the governing equations of such theories hampers their widespread use in practice. To date, except for a very limited number of materials, there is no known experimental procedure for the identification of these parameters. In this research, the internal length scales for an augmented continuum theory, i.e., Mindlin's strain gradient theory, have been theoretically determined for some crystalline materials with cubic structure that are of engineering interest, using ab initio DFT. According to the values obtained for these parameters, it can be perceived that the strain gradient theory is a valuable tool for capturing the size effects at even the smallest scales comparable to the dimensions of a unit cell of a crystal lattice.     

Theoretical explorations on the armchair BN nanotube with defects

A systematic study of armchair boron nitride nanotubes (BNNTs) with defects has been carried out within density functional theory. The effect brought by the defects is localized. The defect sites have major contribution to the frontier molecular orbital and change the conductivity of the BNNTs. The defect sites are reactive centers. The substitution of boron with carbon enhances the field emission of the tubes. Doping or vacancy defect creates active center on nanotubes, thus broadening the applications of nanotubes in chemistry and material sciences through functionalization.     

Theoretical study of X-ray photoelectron spectra of BN and SiC crystals

The tight-binding method has been used to calculate the density of states and X-ray photoelectron spectra of valence electrons in BN and SiC cubic crystals. It is shown that s- and p-states of atoms of various components contribute differently to the spectrum.     

Oxidation fracturing of the graphitic BN sheet

Graphitic BN sheets with well-defined structure are promising candidate materials for future applications in nanoelectronics and molecular devices. The local oxidation is regarded as an effective means to produce a regular nanostructure. However, the underlying fracturing mechanism of such system is unclear. Here we aim to resolve this issue by the ab initio method. we predict the equilibrium configuration and the oxidative cutting process by introducing an epoxy-like chain and an added oxygen atom placed nearby, respectively. The results show that the intermediate epoxy-like pair can be eventually broken up after a key structure formation of B₃O during the oxidative processes.