Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.     

Dinuclear transition metal compounds of a decadentate pyrazole-containing chelating ligand. X-ray crystal structure of Co2(tthd)(ClO4)4(H2O)2(MeOH)1.75

A potentially decadentate ligand, 1,1,4,7,10,10-hexakis(3,5-dimethyl-1-pyrazolylmethyl)-1,4,7,10-tetraazadecane (tthd), has been synthesized from the reaction of tri-ethylenetetramine with six equivalents of N-hydroxymethyl-3,5-dimethylpyrazole. The tthd ligand forms coordination compounds, M₂(tthd)(ClO₄)₄(H₂O)_x, when M is Co, Ni, Cu, Zn and Cd and x = 4–8; and M₂(tthd)(A)₂(ClO₄)₂(H₂O)_x when M is Co and Ni, A is NCS or Cl, and x = 4–8. The cobalt compound, Co₂(tthd)(ClO₄)₂(H₂O)₂(MeOH)_1.75, crystallizes in the triclinic space group P1, a = 1.959(2), b = 1.5657(3), c = 2.1244(3) nm, = 105.5(1), β = 96.9(1), γ = 112.1(1). Due to severe disorder of the anions the structure could only be refined to an R_w, value of 0.099. The ligand acts as a decadentate, dinucleating ligand. The cobalt ions are distorted octahedrally surrounded by five N-atoms of the tthd ligand and an O-atom of water occupying the sixth coordination place. The other perchlorate compounds have very similar structures, as can be concluded from spectroscopic data.

In the thiocyanate and chloride compounds the anions have replaced the coordinated water molecules, resulting in octahedral Ni compounds. With Co thiocyanate, however, tthd acts as an octadentate ligand, resulting only in five-coordinated compounds.     

Synthesis of metallocenes of zirconium, hafnium, manganese, iron, tin, lead and half-sandwich complexes of rhodium and iridium containing the ligands (η-C5R4CR′2PMe2), where R and R′ may be H or Me

The dimethylphosphino substituted cyclopentadienyl precursor compounds [M(C₅Me₄CH₂PMe₂)], where M=Li⁺ (1), Na⁺ (2), or K⁺ (3), and [Li(C₅H₄CR′₂PMe₂)], where R′₂=Me₂ (4), or (CH₂)₅ (5), [HC₅Me₄CH₂PMe₂H]X, where X⁻=Cl⁻ (6) or PF₆⁻ (7) and [HC₅Me₄CH₂PMe₂] (8), are described. They have been used to prepare new metallocene compounds, of which representative examples are [Fe(η-C₅R₄CR′₂PMe₂)₂], where R=Me, R′=H (9); R=H and R′₂=Me₂ (10), or (CH₂)₅ (11), [Fe(η-C₅H₄CMe₂PMe₃)₂]I₂ (12), [Fe{η-C₅Me₄CH₂P(O)Me₂}₂] (13), [Zr(η-C₅R₄CR′₂PMe₂)₂Cl₂], where R=H, R′=Me (14), or R=Me, R′=H (15), [Hf(η-C₅H₄CMe₂PMe₂)₂]Cl₂] (16), [Zr(η-C₅H₄CMe₂PMe₂)₂Me₂] (17), {[Zr(η-C₅Me₄CH₂PMe₂)₂]Cl}{(C₆F₅)₃BClB(C₆F₅)₃} (18), [Zr{(η-C₅Me₄CH₂PMe₂)₂Cl₂}PtI₂] (19), [Mn(η-C₅Me₄CH₂PMe₂)₂] (20), [Mn{(η-C₅Me₄CH₂PMe₂B(C₆F₅)₃}₂] (21), [Pb(η-C₅H₄CMe₂PMe₂)₂] (23), [Sn(η-C₅H₄CMe₂PMe₂)₂] (24), [Pb{η-C₅H₄CMe₂PMe₂B(C₆F₅)₃}₂] (25), [Pb(η-C₅H₄CMe₂PMe₂)₂PtI₂] (26), [Rh(η-C₅Me₄CH₂PMe₂)(C₂H₄)] 29, [M(η,κP-C₅Me₄CH₂PMe₂)I₂], where M=Rh (30), or Ir, (31).     

Heterobimetallic Mo---Sn complexes. Reactions of [Mo(CO)3(CH3CN)2(Cl)(SnRCl2)] (R = Me, Ph) with 4(4-XC6H4)3 (X = Cl, F, H, Me, MeO)

Three families of heterobimetallic compounds were obtained by reaction of [Mo(CO)₃(CH₃CN)₂(Cl)(SnRCl₂)] (R = Ph, Me) with P(4-XC₆H₄)₃ (X = Cl, F, H, Me, MeO). The type of compound obtained dependent on the solvent and concentration of the starting compound. So, [Mo(CO)₂(CH₃COCH₃)₂(PPh₃)(Cl)(SnRCl₂)]·nCH₃COCH₃ (R = Ph, n = 0.5; R = Me, n = 1) (type I) and [Mo(CO)₃{P(4-XC₆H₄)₃}(μ-Cl)(SnRCl₂)]₂ (R = Ph, X = Cl, F, H, Me, MeO; R = Me, X = Cl, F) (type II) were isolated from acetone solution in ca 0.05 M and 0.1 M concentrations, respectively. However, [Mo(CO)₃(CH₃CN) {P(4-XC₆H₄)₃}(Cl)(SnRCl₂)] (R = Ph, X = H; R = Me, X = Cl, F, H) (type III) were obtained from dichloromethane solution independently of the concentration used. All new complexes showed a seven-coordinate environment at molybdenum, containing Mo---Cl and Mo---Sn bonds. Mössbauer spectra indicated a four-coordination at tin for type III complexes.     

Interaction of half-sandwich alkylmolybdenum(III) complexes with B(C6F5)3. The X-ray structure of [CpMo(η-C4H6)(μ-Cl)(μ-CH2)(O)MoCp][CH3B(C6F5)3]

The reactions of the half-sandwich molybdenum(III) complexes CpMo(η⁴-C₄H₄R₂)(CH₃)₂, where Cp=η⁵-C₅H₅ and R=H or CH₃, with equimolar amounts of B(C₆F₅)₃ have been investigated in toluene. EPR monitoring shows the formation of an addition product which does not readily react with Lewis bases such as ethylene, pyridine, or PMe₃. The analysis of the EPR properties and the X-ray structure of a decomposition product obtained from dichloromethane, [CpMo(η⁴-C₄H₆)(μ-Cl)(μ-CH₂)(O)MoCp][CH₃B(C₆F₅)₃], indicate that the borane attack has occurred at the methyl position.     

The infrared spectrum of gaseous Sb4O6

The vibrational spectrum of Sb₄O₆ in the gas phase has been measured at 1000 K by high-temperature infrared spectroscopy. The four infrared-active absorption bands were observed at ν₇ = 785.0 cm¹, ν₈ = 176.2 cm⁻¹, ν₉ = 292.4 cm⁻¹ and ν₁₀ = 415.6 cm⁻¹. By combining these results with data on the molecular geometry and the infrared-inactive modes, as reported in the literature, the thermodynamic functions of Sb₄O₆ have been calculated.     

Synthesis and derivative chemistry of [Ru2(μ-PPh2) (μ-OH) 2(μ-p-cymene) 2]

The cationic diphenylphosphido-bridged compound [Ru₂(μ-PPh₂)(μ-OH)₂(η⁶-p-cymene)₂][PF₆) (2) has been prepared by reaction of the tri-μ-hydroxo complex [Ru₂(μ-OH)₃(η-p-cymene)₂][PF₆] (1) with diphenylphosphine. Complex 2 eliminates water on reaction with protic acids, incorporating the conjugate base of the added acid as a bridging ligand. Formic acid, acetic acid, phenol, and aniline react with 2 to give the monosubstituted compounds [Ru₂(μ-PPh₂)(μ-OH)(μ-L)(η⁶-p-cymene)₂]PF₆] (L = HCO₂, MeCO₂, OPh, or NHPH), whereas methanol, thiophenol, 1,2-benzenedithiol, hydrochloric acid and isopropanol afford the disubstituted derivatives [Ru₂(μ-PPh₂)(μ-L)₂(η⁶-p-cymene)₂]PF₆] (L = OMe, SPh, S₂C₆H₄, Cl, or H).     

The reaction of (μ-H)2Os3(CO)9(PPh3) with ethylene affords the ethylidene complex (μ-H)2Os3(CO)9(PPh3)(μ-CHCH3)

The product isolated from the reaction of (μ-H)₂Os₃(CO)₉(PPh₃) with ethylene is shown to be the ethylidene complex (μ-H)₂Os₃(CO)₉(PPh₃)(μ-CHCH₃) (1) rather than the ethylene complex (μ-H)(H)Os₃(CO)₉(PPh₃)(C₂H₄), as previously claimed. The characterization of 1 is based on a combination of ¹H and ¹³C NMR results. The ¹H NMR data (δ 6.84 (1 H_D), 2.53 (3 H_C), J(CD) = 7.4 Hz) establish the presence of the ethylidene moiety, whereas detailed analysis of the 1-D and 2-D ¹³C NMR spectra of ¹³CO-enriched 1 indicates the relative positions of the ethylidene, hydride, and phosphine ligands on the triosmium framework.     

Synthesis, characterization of new Rh---Co mixed-metal clusters and reactions of clusters containing [Rh2Co2C2] core with 1-alkynes and/or carbon monoxide

Six new cluster derivatives [Rh₂Co₂(CO)₆(μ-CO)₄(μ₄,η²-HCCR)] (R=FeCp₂ 1, CH₂OH 2, (CH₃O)C₁₀H₆CH(CH₃)COOCH₂CCH 3) and [RhCo₃(CO)₆(μ-CO)₄(μ₄,η²-HCCR)] (R=FeCp₂ 4, CH₂OH 5, (CH₃O)C₁₀H₆CH(CH₃)COOCH₂CCH 6) were obtained by the reactions of [Rh₂Co₂(CO)₁₂] and [RhCo₃(CO)₁₂] with substituted 1-alkyne ligands HCCR [R=FeCp₂ 7, CH₂OH 8, (CH₃O)C₁₀H₆CH(CH₃) COOCH₂CCH 9] in n-hexane at room temperature, respectively. Alkynes insert into the Co---Co bond of the tetranuclear clusters to give butterfly clusters. [Rh₂Co₂(CO)₆(μ-CO)₄(μ₄,η²-HCCFeCp₂)] (1) was characterized by a single-crystal X-ray diffraction analysis. Reactions of 1, 2 with 7, 8 and ambient pressure of carbon monoxide at 25 °C gave two known cluster complexes [Co₂(CO)₆(μ₂, η²-HCCR)] (R=FeCp₂ 10, CH₂OH 11), respectively. All clusters were characterized by element analysis, IR and ¹H-NMR spectroscopy.     

The tungsten-tungsten triple bond---18. Bridging and terminal allyl ligands in complexes of the formula W2(R)2(NMe2)4, where R = C3H5 and C4H7

The reaction between RMgCl (two equivalents) and 1,2-W₂Cl₂(NMe₂)₄ in hydrocarbon solvents affords the compounds W₂R₂(NMe₂)₄, where R = allyl and 1− and 2-methyl-allyl. In the solid state the molecular structure of W₂(C₃H₅)₂(NMe₂)₄ has C₂ symmetry with bridging allyl ligands and terminal W---NMe₂ ligands. The W---W distance 2.480(1) Å and the C---C distances, 1.47(1) Å, imply an extensive mixing of the allyl π-MOs with the WW π-MOs, and this is supported by an MO calculation on the molecule W₂(C₃H₅)₂(NH₂)₄ employing the method of Fenske and Hall. The most notable interaction is the ability of the (WW)⁶⁺ centre to donate to the allyl π^*-MO (π₃). This interaction is largely responsible for the long W---W distance, as well as the long C---C distances, in the allyl ligand. The structure of the 2-methyl-allyl derivative W₂(C₄H₇)₂(NMe₂)₄ in the solid state reveals a gauche-W₂C₂N₄ core with W---W = 2.286(1) Å and W---C = 2.18(1) Å, typical of WW and W---C triple and single bonds, respectively. In solution (toluene-d₈) ¹H and ¹³C NMR spectra over a temperature range −80°C to +60°C indicate that both anti- and gauche- W₂C₂N₄ rotamers are present for the 2-methyl-allyl derivative. In addition, there is a facile fluxional process that equilibrates both ends of the 2-methyl-allyl ligand on the NMR time-scale. This process leads to a coalescence at 100°C and is believed to take place via an η³-bound intermediate. The 1-methyl-allyl derivative also binds in an η¹ fashion in solution and temperature-dependent rotations about the W---N, W---C and C=C bonds are frozen out at low temperatures. The spectra of the allyl compound W₂(C₃H₅)₂(NMe₂)₄ revealed the presence of two isomers in solution—one of which can be readily reconciled with the presence of the bridging isomer found in the solid state while the other is proposed to be W₂(η³-C₃H₅)₂(NMe₂)₄. The compound W₂R₂(NMe₂)₄ where R = 2,4-dimethyl- pentadiene was similarly prepared and displayed dynamic NMR behaviour explainable in terms of facile η¹ = η³ interconversions.     

Attempts at stepwise reduction of the carbon-nitrogen triple bond of a nitrile at two metal centres: study of the reactivity of [(CO)(PPh3)2Re( (μ-NCHPh)Ru(PPh3) 2(PhCN)] towards tetrafluoroboric acid and dihydrogen

The reaction of [(CO)PPh₃)₂Re(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)] (2) with HBF₄-Me₂O generates [(CO)PPh₃)₂Re(μ- H)₂(μ,η¹,η²HNCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (3). Monitoring the reaction by NMR spectroscopy shows the intermediate formation of [(CO)(PPh₃)₂ HRe(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (4). Attempted reduction of the imine ligand by a nucleophile (H⁻ or CN⁻) failed, regenerating 2. Under dihydrogen at 50 atm, 3 is slowly transformed into [(CO)(PPh₃)₂HRe(μ-H)₃Ru(PPh₃)₂(PhCN)][BF₄] (5) with liberation of benzyl amine.     

Synthesis, characterization and antitumor activity of some arylantimony triphenylgermanylpropionates and crystal structures of Ph3GeCH(Ph)CH2CO2SbPh4 and [Ph3GeCH2CH(CH3)CO2]2Sb(4-ClC6H4)3

A series of novel arylantimony(V) triphenylgermanylpropionates with the formula (Ph₃GeCHR¹CHR²CO₂)_nSbAr_(5−n) (R¹=H, Ph; R²=H, CH₃; n=1, 2) were synthesized and characterized by elemental analysis, IR, ¹H-NMR, ¹³C-NMR and mass spectroscopy. The crystal structures of Ph₃GeCH(Ph)CH₂CO₂SbPh₄ and [Ph₃GeCH₂CH(CH₃)CO₂]₂Sb(4-ClC₆H₄)₃ were determined by X-ray diffraction. The in vitro antitumor activities of some selected compounds against five cancer cells are reported.     

Mononuclear Pt(II) and Pd(II) 1,4-dithiolato complexes. Crystal structures of [Pt((−) DIOS) (PPh3)2] and [Pd(S(CH2) 4S)(Ph2P(CH2) 3PPh2)]. Application in styrene hydroformylation

Addition of 1,4-dithiols to dichloromethane solutions of [PtCl₂(P-P)] (P-P = (PPh₃)₂, Ph₂P(CH₂)₃PPh₂, Phd₂P(CH₂)₄PPh₂; 1,4-dithiols = HS(CH₂)₄SH, (−)DIOSH₂ (2,3-O-isopropylidene-1,4-dithiol-l-threitol), BINASH₂ (1,1′-dinaphthalene-2,2′-dithiol)) in the presence of NEt₃ yielded the mononuclear complexes [Pt(1,4-dithiolato)(P-P)]. Related palladium(II) complexes [Pd(dithiolato)(P-P)] (P-P=Ph₂P(CH₂)₃PPh₂, Ph₂P(CH₂)₄PPh₂; dithiolato = ⁻S(CH₂)₄S⁻, (−)-DIOS) were prepared by the same method. The structure of [Pt((−)DIOS)(PPh₃)₂] and [Pd(S(CH₂)₄S)(Ph₂P(CH₂)₃PPh₂)] complexes was determined by X-ray diffraction methods. Pt—dithiolato—SnC1₂ systems are active in the hydroformylation of styrene. At 100 atm and 125°C [Pt(dithiolate)(P-P)]/SnCl₂ (Pt:Sn = 20) systems provided aldehyde conversion up to 80%.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

The system CePO4–K3PO4

The phase diagram of the system CePO₄–K₃PO₄ has been determined based on investigations by differential thermal analysis, X-ray powder diffraction, IR spectroscopy and optical microscopy. The system contains only one intermediate compound K₃Ce(PO₄)₂, which melts incongruently at (1500±20)°C. This compound is stable down to room temperature and exhibits a polymorphic transition at 1180°C. It was confirmed that the low-temperature form β-K₃Ce(PO₄)₂ crystallizes in a monoclinic system, space group P2₁/m with unit cell parameters a=9.579 (5), b=5.634 (6), c=7.468 (5) Å; =γ=90°, β=90.81 (3)°; V=403.083 Å³.     

Hydrothermal synthesis, structural characterisation and magnetic behaviour of hybrid complexes of N-(phosphonomethyl)iminodiacetate

Two new compounds containing multidentate chelating organic residues of N-(phophonomethyl)iminodiacetic acid (H₄pmida), [M(pyr)(H₂O)₄][M₂(Hpmida)₂(pyr)(H₂O)₂]·2(H₂O) (where pyr=pyrazine and M=Co²⁺ or Ni²⁺ for I and II, respectively) have been synthesised and structurally characterised by single-crystal and powder X-ray diffraction, elemental analysis, infrared spectroscopy, thermal analysis and solid-state ³¹P MAS NMR. The compounds contain discrete binuclear anionic [M₂(Hpmida)₂(pyr)(H₂O)₂]²⁻ units in which one pyrazine ligand bridges two M²⁺ cations which are completely trapped inside three five-membered chelate rings formed by the Hpmida³⁻ ligands. These moieties close pack in the ac plane via a series of strong and highly directional O–HO hydrogen bonds leading to the formation of anionic layers. One-dimensional cationic coordination polymers are placed in-between and strongly hydrogen-bonded to these layers. The magnetic properties of these two materials are also reported.     

Homo- and hetero-bridged mixed-valence dinuclear complexes which contain the fragment ‘Rh(C6F5)3’

The reaction of the anionic mononuclear rhodium complex [Rh(C₆F₅)₃Cl(Hpz)]^t- (Hpz = pyrazole, C₃H₄N₂) with methoxo or acetylacetonate complexes of Rh or Ir led to the heterodinuclear anionic compounds [(C₆F₅)₃Rh(μ-Cl)(μ-pz)M(L₂)] [M = Rh, L₂ = cyclo-octa-1,5-diene, COD (1), tetrafluorobenzobarrelene, TFB (2) or (CO)₂ (4); M = Ir, L₂ = COD (3)]. The complex [Rh(C₆F₅)₃(Hbim)]⁻ (5) has been prepared by treating [Rh(C₆F₅)₃(acac)]⁻ with H₂bim (acac = acetylacetonate; H₂bim = 2,2′-biimidazole). Complex 5 also reacts with Rh or Ir methoxo, or with Pd acetylacetonate, complexes affording the heterodinuclear complexes [(C₆F₅)₃Rh(μ-bim)M(L₂)]⁻ [M = Rh, L₂ = COD (6) or TFB (7); M = Ir, L₂ = COD (8); M = Pd, L₂ = η³-C₃H₅ (9)]. With [Rh(acac)(CO)₂], complex 5 yields the tetranuclear complex [{(C₆F₅)₃Rh(μ-bim)Rh(CO)₂}₂]₂₋. Homodinuclear Rh^III derivatives [{Rh(C₆F₅)₃}₂(μ-L)₂]^·- [L₂ = OH, pz (11); OH, S^tBu (12); OH, SPh (13); bim (14)] have been obtained by substitution of one or both hydroxo groups of the dianion [{Rh(C₆F₅)₃(μ-OH)}₂]²⁻ by the corresponding ligands. The reaction of [Rh(C₆F₅)₃(Et₂O)_x] with [PdX₂(COD)] produces neutral heterodinuclear compounds [(C₆F₅)₃Rh(μ-X)₂Pd(COD)] [X = Cl (15); Br (16)]. The anionic complexes 1–14 have been isolated as the benzyltriphenylphosphonium (PBzPh₃⁺) salts.     

Substituted metal carbonyls XIII. Fe(CO)4(η-dppf) [where DPPF = (Ph2PC5H4)2Fe]: a convenient building block for heterometallic complexes

The potential of Fe(CO)₄(η¹-dppf) (dppf = 1,1′-bis(diphenylphosphino)ferrocene) as a precursor for heterometallic species is fully expanded in the synthesis of (OC)₄Fe(μ-dppf)Cr(CO)₅, (OC)₄Fe(μ-dppf)W(CO)₅, and (OC)₄Fe(μ-dppf)Mn₂(CO)₉, all of which have been characterized by IR, NMR (¹H and ³¹P) and elemental analyses. The low energy requirement of TMNO (Me₃NO · 2H₂O)decarbonylation allows the formation of monosubstituted Mn₂(CO)₁₀ as the major product. This aspect is further substantiated by the isolation of Mn₄(CO)₁₈(μ-dppf) in which the single bridging of a diphosphine group between two Mn₂(CO)₉ moieties is unprecedented.     

Metallorganische lewissäuren : XX. Reaktionen von (π-C5H5)(CO)2LM-X (L = CO, PR3; M = Mo, W; X = BF4, PF6, AsF6, SbF6) mit Schwefel-haltigen liganden

The compounds (π-C₅H₅)(CO)₂LM-X (L = CO, PR₃; M = Mo, W; X = BF₄, PF₆, AsF₆, SbF₆) react with H₂S, p-MeC₆H₄SH, Ph₂S and Ph₂SO(L′) to give ionic complexes [(π-C₅H₅)(CO)₂LML′]⁺ X⁻. Also sulfur-bridged complexes, [(π-C₅H₅)(CO)₃W---SH---W(CO)₃(π-C₅H₅)]⁺ AsF₆⁻ and [(π-C₅H₅)(CO)₃M-μ-S₂C=NCH₂Ph-M(CO)₃(π-C₅H₅)], have been obtained. Reactions with SO₂ and CS₂ have been examined.     

Study of the N2 bΠu state via 1 + 1 multiphoton ionization

Medium-resolution spectra of the N₂ b¹Π_u-X¹Σ_g⁺ band system were recorded by 1 + 1 multiphoton ionization. In the spectra we found different linewidths for transitions to different vibrational levels in the b ¹Π_u state: Δν₀ = 0.50 ± 0.05 cm⁻¹, Δν₁ = 0.28 ± 0.02 cm⁻¹, Δν₂ = 0.65 ± 0.06 cm⁻¹, Δν₃ = 3.2 ± 0.5 cm⁻¹, Δν₄ = 0.60 ± 0.07 cm⁻¹, and Δν₅ = 0.28 ± 0.02 cm⁻¹. From these linewidths, predissociation lifetimes τ_ν were obtained: τ₀ = 16 ± 3 ps, τ₁ > 150 ps, τ₂ = 10 ± 2 ps, τ₃ = 1.6 ± 0.3 ps, τ₄ = 9 ± 2 ps, and τ₅ > 150 ps. Band origins and rotational constants for the b ¹Π_uν = 0 and 1 levels were determined for the ¹⁴N₂ and ¹⁴N¹⁵N molecules.