Light scattering from a nematic monodomain in an electric field Twist elastic constant and viscosity coefficient of nematic polymer–solvent mixtures

Abstract

The light scattering technique was used to investigate the viscoelastic parameters characterizing director twist distortions in miscible nematic mixtures of 5CB (pentacyanobiphenyl) with two side chain liquid crystal polymers and a main chain liquid crystal polymer. By applying an AC electric field to homeotropically-aligned nematic monodomains of the mixtures, the field-dependent scattering intensities and director orientation fluctuation relaxation rates yield, respectively, the twist elastic constant K ₂₂ and viscosity coefficient γ₁. The results directly demonstrate that the addition of liquid crystal polymers causes substantial decreases of the relaxation rates for dynamic light scattering from the twist mode and these changes are due to small decreases in K ₂₂ coupled with large increases in γ₁. The decrements in K ₂₂ are comparable for both side chain and main chain liquid crystal polymers. The relative increase in the twist viscosity for the side chain liquid crystal polymers is much smaller than those of main chain polymers. A theoretical model is used to qualitatively interpret the difference between the viscous behaviour of the twist mode for both side chain and main chain liquid crystal polymers in a nematic solvent.     

A ductile-brittle zone in polyimides depending on the reaction temperature

The mechanical and optical properties of polyimides were studied in this paper and the influence of the variation of the reaction temperature on the physico-chemical properties of the polymers was evaluated. From this the dependence of the stress-strain diagrams on the reaction temperature, as well as the stresses and strains at fracture were experimentally determined. Moreover, the elastic moduli and Poisson's ratios, as well as the refractive index of the polymers were evaluated for different temperatures of imidization. In order to define also the behaviour of the polymers as thin membranes at fracture, simple tension tests with edge-cracked thin strips were executed up to fracture. The method of caustics was used, with the specimens loaded inK _I mode of deformation at different stress-levels to evaluate the stress intensity factors of the materials in the non-linear zone of loading. TheK _I -factor was evaluated by applying the simple Dugdale-Barenblatt model for the ductile materials, whereas for brittle samples the elastic theory was used. Interesting results concerning the physico-mechanical properties of the polyimides were derived.     

Thermal conductivity of oriented crystalline polymers

Thermal conductivities of six oriented semicrystalline polymers which range from 0.37 to 0.63 in crystallinity and 1 to 5 in draw ratio λ (up to about 15 for two polymers) have been measured between 100 and 340 K. It was found that for increasing λ the conductivity K_∥ (along the draw direction n?) increases rapidly while K_⊥ (normal to n?) decreases slightly; K_∥ also increases with temperature, but K_⊥ shows no simple pattern in temperature dependence. These general features can be reproduced reasonably well at low draw ratio (λ < 5) by the modified Maxwell model, and the discrepancy in details may be attributed to the fact that the model does not take into account the possible anisotropy of the amorphous phase of the oriented polymers. At high draw ratio the intercrystalline bridge effect becomes important, and one must resort to the Takayanagi model, but the lack of corroborating x-ray data has rendered a detailed comparison impossible.     

Synthesis,crystallization kinetics,and spherulitic growth of linear and star‐shaped poly(L‐lactide)s with different numbers of arms

Well‐defined linear poly(L ‐lactide)s with one or two arms (LPLLA and 2LPLLA, respectively) and star‐shaped poly(L ‐lactide)s with four or six arms (4sPLLA and 6sPLLA, respectively) were synthesized and then used for the investigation of the thermal properties, isothermal crystallization kinetics, and spherulitic growth. The maximal melting temperature, the cold‐crystallization temperature, and the degree of crystallinity of these poly(L ‐lactide) polymers decreased with an increasing number of arms in the macromolecule. Moreover, the isothermal crystallization rate constant (K) of these poly(L ‐lactide) polymers decreased in the order of K_LPLLA > K_2LPLLA > K_4sPLLA > K_6sPLLA2, which was consistent with the variation trend of the spherulitic growth rate (G). Meanwhile, both K and G of 6sPLLA slightly increased with the increasing molecular weight of the polymer. Furthermore, both LPLLA and 2LPLLA presented spherulites with good morphology and apparent Maltese cross patterns, whereas both unclear Maltese cross patterns and imperfect crystallization were observed for the star‐shaped 4sPLLA and 6sPLLA polymers. These results indicated that both the macromolecular architecture and the molecular weight of the polymer controlled K, G, and the spherulitic morphology of these poly(L ‐lactide) polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2226–2236, 2006     

Treating the polyelectrolytes as polymers with a draining effect. I. The statistical segment length

The statistical segment length of polyelectrolytes, A, in aqueous salt solutions is derived from the unperturbed dimensions parameter, K_θ, that is obtained from the graphical representations based on the Stockmayer–Fixman–Burchard and Dondos–Benoît equations. In order to obtain A from K_θ we use values of the Flory's parameter, Φ, which are given from an empirical equation established for the polymers presenting a draining effect, such as the wormlike polymers. With these values of Φ, the obtained values of A for different polyelectrolytes in aqueous salt solutions of different ionic strength are found very close to the values obtained from other more complicated methods. This result shows that the polyelectrolytes can be considered as polymers presenting a draining effect. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4225–4229, 2004     

Fox-Flory constant K obtained by viscometric measurements for poly(ethyl methacrylate) and poly(methyl methacrylate) systems

Poly(ethyl methacrylate) and poly(methyl methacrylate) prepared by benzoyl peroxide-catalyzed polymerization were fractionated. The Fox-Flory constant K was determined for these polymers by viscometry in several good and bad solvents. Application of some empirical methods for evaluation of K are also briefly discussed in relation to our results.     

Catalytic effect of poly(4-vinyl-N-alkylpyridinium) salts on the hydrolysis of ester- and amide-containing indolyl groups

Alkaline hydrolyses of p-nitrophenyl-3-indoleacetate (p-NPIA) and N-(indole-3-acryloyl)imidazole (IAI) were studied in the presence of poly(4-vinyl-N-propylpyridinium bromide) (C3PVP), poly(4-vinyl-N-benzylpyridinium chloride) (BzPVP), and copolymers of 4-vinyl-N-benzylpyridinium chloride and 4-vinyl-N-cetylpyridinium bromide (C16BzPVP). The hydrolyses were enhanced by the addition of these cationic polyelectrolytes. The magnitudes of the enhancement were in the order C16BzPVP > BzPVP > C3PVP, which is explainable in terms of the hydrophobicity of the polymers. The result and activation parameters obtained indicated that the substrates bound to polymers were more reactive than free substrates. The association constants obtained from the kinetic measurements (K) increased in the order BzPVP < C3PVP < C16BzPVP, which may suggest an important contribution of charge transfer interaction, in addition to electrostatic and hydrophobic interactions, between the polymers and the substrates. The association constants between the polymers and IAI were also obtained independently from the spectrophotometric measurements (K^*) with the charge transfer absorption bands. The lack of a satisfactory agreement between K and K^* is discussed.     

Shear-dependent rheological properties of starch/bentonite composite gels

 Rheological properties of starch/bentonite gels (5.3–8.2% solids, 0–100% starch) were investigated at shear rates 0.0083–0.33 s^-1 (Brookfield viscometer). Prior to these measurements the strain introduced during preparation of the gel was kept as low as possible. Under these conditions six different types of structural units could be identified in the gel: bentonite particles associated in a band-type structure; bands coated with starch polymers; bundles of bands interlaced and enveloped by starch polymers (strands); individual bentonite platelets dispersed in a polymer matrix; starch polymer networks; and swollen granules. A power-law model was fitted to the experimental viscosity data: μ_app= Kγ ^n-1 . In all cases n was found to be less than 0.5. Its value decreased with the ability of the structural components to reorient under applied shear. K was found to be proportional to the compaction and/or entanglement of the structural units. These trends in K and n were further confirmed by the index of thixotropy (IT) and complex modulus of shear elasticity (G ^* ) measurements. Received: 12 August 1996 Accepted: 7 January 1997     

Molecularly imprinted polymers as artificial steroid receptors

The polymers selective to six different steroids (testosterone, Δ⁴-androstene-3,17-dione, 1,4-androstadiene-3,17-dione, β-estradiol, progesterone, testosterone propionate) have been synthesized using molecular imprinting based on noncovalent interactions. Analysis of the influence of structural features of the steroids under study has shown that molecules with a relatively rigid structure and the OH group at C-17 position are the most efficient templates for methacrylic acid-containing imprinted polymers. The chromatographic study of the polymers synthesized has demonstrated a strong dependence of the selectivity and intensity of interaction with analytes on the composition of solvents used both as porogen and chromatographic mobile phase. To obtain polymers with highly selective recognition sites and to create the optimal conditions for molecular recognition, all possible interactions (between template and functional monomer, template and solvent, solvent and functional monomer) should be taken into account. <?TF="palat-i"> The batch rebinding study of testosterone by the imprinted polymer in acetonitrile has revealed some heterogeneity of recognition sites, and permitted determination of K_ass = 1.05 × 10⁴ M ⁻¹, ΔG° = −5.4 kcal/mol and N = 1.2 μmol/g for high-affinity sites and K_ass = 0.33 × 10⁴ M ⁻¹, ΔG° = −4.8 kcal/mol and N = 2.2 μmol/g for low-affinity sites. <?TF="palat-i"> The results obtained show how it is possible to regulate in different modes the molecular recognition by imprinted polymers as well as to fabricate polymers possessing the necessary properties depending on their practical application.© 1998 John Wiley & Sons, Ltd.     

A study of the surface analysis of some water‐soluble polymers by inverse gas chromatography

The surface characterization of 2‐(dimethylamino)ethylmethacrylate (DMA) and 2‐(N‐morpholino)ethylmethacrylate (MEMA) homopolymers and DMA–MEMA diblock copolymer was studied using inverse‐gas chromatography (IGC). The analyzed surface properties of (co)polymers were the dispersive component of the surface energy ( ) and the acid–base characters of (co)polymer surfaces. The specific free energy (ΔG^sp), enthalpy (ΔH^sp), and entropy (ΔS^sp) of adsorption of polar probes on (co)polymers were calculated. The values of ΔH^sp were correlated with both the donor and the modified acceptor numbers (AN) of the probes to quantify the acidic K_A and the basic K_D parameters of (co)polymer surfaces. The values obtained for the K_A and K_D parameters indicated basic characters for the surface of (co)polymers. The dispersive component values of the surface energy and the acid–base surface parameters of the DMA–MEMA diblock copolymer surface were found to be between those homopolymers as expected. Copyright © 2008 John Wiley & Sons, Ltd.     

Design and synthesis of triptycene based fluorescent polymer with pendent triazole: Effect of functionality on host–guest interaction

Fluorescent materials have emerged as one of the promising candidates for chemical sensing due to their high sensitivity towards analytes that are relatively electron deficient such as nitroaromatics (NACs). Herein, four new 1,2,3‐triazole functionalized dibromo monomers ( 2‐5 ) have been synthesized. These dibromo monomers ( 2‐5 ) have been subsequently polymerized with 2,6‐diethynyltriptycene ( DET ) to yield four new ethynyl linked polymers ( P2‐P5 ) with 1,2,3‐triazole pendent. These polymers are organosoluble, amorphous in nature and have high thermal stability [T_d > 289 °C and high char yield (>73%) at 800 °C]. Interestingly these new polymers ( P2‐P5 ) are highly fluorescent in solution (Φ = 0.37–0.43 in DCM) relative to the polymer ( P1 ) that does not have the 1,2,3‐triazole motif as a pendent. The host–guest interaction between these polymers ( P1‐P5 ) and electron deficient molecules (PA and C₆₀) has been investigated. The Stern–Volmer quenching constant (K_SV) data suggest that the interaction of picric acid and polymers increases significantly in presence of 1,2,3‐triazole linked pendent group whereas in case of C₆₀, the K_SV value decrease considerably in presence of 1,2,3‐triazole linked pendent. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3725–3735     

Synthesis and self‐assembly of thymine‐ and adenine‐containing homopolymers and diblock copolymers

Atom transfer radical polymerizations (ATRPs) of 1‐(4‐methacryloyloxy‐benzyl)thymine (MAT) and 9‐(2‐methacryloyloxyethyl)adenine (MAA) were conducted for the synthesis of DNA‐base functionalized polymers. The association equilibrium constant K_asso between MAT and MAA and the complexation equilibrium constant K_comp between the corresponding polymers PMAT and PMAA were determined. A zipper‐like diblock copolymer, PMAT‐b‐PMAA, was prepared by anchoring the PMAT and PMAA blocks on the ortho‐positions of a pyridine ring via a successive two‐step ATRP. Dynamic light scattering and atom force microscopy confirmed that the block copolymer had a V‐shaped configuration in dimethylsulfoxide/N,N‐dimethylformamide. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5995–6006, 2006     

Polymerization of α-methylstyrene by living polymer in tetrahydrofuran

Kinetics of polymerization of α-methylstyrene by poly-α-methylstyrylsodium (a “living” polymer) has been studied in tetrahydrofuran at ?78°C. Complex dependences were established: that of the conversion X on reduced time φ and that of the apparent rate constant for the polymer chain propagation on conversion X and on the concentration of living polymers and monomer. The experimental data obtained were explained by assuming a coordination mechanism of anionic polymerization including the following elementary reaction: (a) generation of active polymerization centers (K₁) by interaction of the living polymer with the monomer; (b) propagation of the polymer chains (K₂); (c) monomolecular (K₃₁) and bimolecular (K₃₂) reactions of isomerization of active centers resulting in the formation of high molecular weight living polymers capable of again becoming active centers of polymerization. Approximate derivation of kinetic equation was carried out and the constants of elementary reactions were determined (K₁ = 0.15, K₂ = 24, K₃₂ = 14.1./mole-min and K₃₁ = 0.05 min^?1). The coincidence of the expected dependencies X = F(τ; φ) K_p = F(X; n₀^?1/2); dx/dτ = F(n₀) with the experimental ones was followed with the aid of computers. The expected change in the values of X and K_p depending on the contribution of each elementary reaction to the overall polymerization process was analyzed.     

A few characterization studies on some poly(methyl aryloxymethacrylates)

High polydispersity values obtained for the molecular weights, as determined by light scattering, osmometry, and GPC, of polymers prepared by different methods from the monomers recently synthesised indicate the presence of large quantities of low molecular weight species besides the high molecular weight species besides the high molecular weight species. Intrinsic viscosity data were used to evaluate Mark–Houwink constants K and “a” for this new series of monomers. DSC analyses show that the polymers have low T_g. X-ray diffraction studies made on the fibers show a high percentage of crystallinity in poly(methyl α-phenoxymethacrylate).     

Semifluorinated Polymers as Ion‐selective Electrode Membrane Matrixes

Most commercially available fluorous polymers are ill suited for the fabrication of ion‐selective electrode (ISE) membranes. Therefore, we synthesized semifluorinated polymers for this purpose. Ionophore‐free ion‐exchanger electrodes made with these polymers show a selectivity range (≈14 orders of magnitude) that is nearly as wide as found previously for liquid fluorous ion‐exchanger electrodes. These polymers were also used to construct ISE membranes doped with fluorophilic silver ionophores. While the resulting ISEs were somewhat less selective than their fluorous counterparts, the semifluorinated polymers offer the advantage that they can be doped both with fluorophilic ionophores and traditional lipophilic ionophores, such as the silver ionophore Cu(II)‐I (o ‐xylylenebis[N,N ‐diisobutyldithiocarbamate]). We also cross‐linked these polymers, producing very durable membranes that retained broad selectivity ranges. K⁺ ISEs made with the cross‐linked semifluorinated polymer and the ionophore valinomycin showed selectivities similar to those of PVC membrane ISEs but with a superior thermal stability, the majority of the electrodes still giving a theoretical (Nernstian) response after exposure to a boiling aqueous solution for 10 h.     

Plasma Polymerization on Metals

An ellipsometric technique is described for accurately measuring the film thickness of plasma-polymerized polymers on metallic substrates. The index of refraction n and absorption index Kof the plasma polymer film can also be studied by ellipsometry. Films of plasma polystyrene and polyepichlorohydrin were deposited on evaporated aluminum substrates and their thickness and optical constants determined. Plasma polystyrene films from 20 to 1600 Å thick have optical constants n = 1.63 and K =0 independent of film thickness. Plasma polyepichlorohydrin films over the same range of thickness give n ? 1.70 and K? 0.01. By utilizing the ellipsometric method the effect of plasma polymer film thickness on surface energy properties was determined. Advancing contact angle measurements and surface energy analysis detail the polar γSV^P dispersion γSV^Pcontributions to the solid-vapor surface tension γSV = γSV^d + γSV^P Polystyrene and polyepichlorohydrin films on etched aluminum. For thin plasma polystyrene films (600 Å), anomalies in the calculated surface energy are discussed and related to possible surface nonuniformity caused by film growth. Thicker films of plasma polystyrene are shown to have normal surface energy properties as does plasma poly-epichlorohydrin over the entire range of film thickness measured. The adhesive and cohesive properties of plasma polystyrene and polyepichlorohydrin films are discussed as estimated from a lap-shear bond strength study. Etched aluminum coated with various thicknesses of these two polymers and bonded with an epoxy-phenolic adhesive shows a decreasing shear strength with increasing plasma film thickness but begins to level off at ～1600 psi for films >1600 Å thick.     

Poly(arylene ether)s from new biphenols containing imidoarylene and dicyanoarylene moieties

Novel poly(arylene ether)s were synthesized from new biphenol monomers 14–16 1 containing imido‐ or dicyanoarylene groups. The syntheses of these polymers were carried out in tetramethylene sulfone in the presence of anhydrous K₂CO_3, by a nucleophilic substitution condensation between the biphenol and activated difluoro compounds to give high molecular weight polymers. All the polymers have high T_g 's and good thermal stability as determined from DSC and TGA analysis. Inherent viscosities of these polymers are in the range of 0.33–0.63 dL/g. They are amorphous and readily soluble in NMP, DMF, and DMSO. The glass‐transition temperatures of the polymers range from 248–295 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1318–1322, 2000     

Effect of iodine on small-angle X-ray diffraction from drawn poly(ethylene terephthalate) film

The effect of iodine sorption on the small-angle x-ray diffraction intensity is discussed in terms of the distribution of iodine sorbed in the amorphous regions of polymers. The change in the intensity of the peak corresponding to long periods is measured as a function of the iodine uptake in drawn, and annealed poly(ethylene terephthalate) films. A linear relation with slope K is observed between the square root of relative intensity and iodine uptake. The slope K varies with annealing conditions. Theoretical values calculated for models of the distribution of iodine in amorphous regions, are compared with the observed K. Results can be interpreted on the basis of a “concave” distribution of iodine, i.e., with sorption sites more numerous near a crystal surface than in the interior of an amorphous region.     

Cyclodextrin Solubilization of the Antibacterial Agents Triclosan and Triclocarban: Effect of Ionization and Polymers

The natural β-cyclodextrin (βCD) and its complexes have limited solubility in aqueous solutions. This low aqueous solubility, as well as low aqueous solubility of the guest molecule (i.e. triclosan or triclocarban (TCC)), can result in low complexation efficiency (CE). The purpose of this study was to enhance the apparent intrinsic solubility (S ₀) of the guest molecule and its βCD complexes through ionization and addition of auxiliary compounds such as polymers, amino acids and metal ions. Both triclosan (pK _a 7.9) and TCC (pK _a 12.7) are weak acids. Addition of ethanol to the complexation medium enhanced S ₀ of both triclosan and TCC but at the same time ethanol lowered the stability constant (K _c ) of their βCD complexes resulting in overall lowering of CE. Addition of small amount of water-soluble polymers enhanced the βCD solubilization of both guests, and addition lysine enhanced the solubilization of TCC. Ionization of triclosan resulted in significant enhancement of CE and enhanced triclosan release from tablets containing triclosan/βCD complex. The effect of ionization was not as pronounced in the case of TCC.This revised version was published online in July 2005 with a corrected issue number.     

SYNTHESIS OF CONDENSATION POLYMERS OF SALICYLIC ACID, FORMALDEHYDE AND ALKYL PRIMARY AMINES AND ITS APPLICATION AS A CATALYST FOR THE HYDROLYSIS OF p-NITROPHENYL ACETATE (PNPA) IN AQUEOUS SOLUTION

As a model of serine hydrolase, the condensation polymers of salicylic acid, formaldehyde and methyl amine, n-propyl amine, n-hexyl amine or n-lauryl amine were prepared by polycondensation catalyzed by sulfuric acid. It was confirmed by potentiometric titration and infrared spectrum that the polymers containing tertiary amino group possess the structure which resembles the internal salt of amino acid in weak basic and weak acidic solution: