无限长粘弹性圆柱管中轴对称波的传播模式和衰减

在Kelvin-Voigt线性粘弹性模型框架内研究了无限长粘弹性圆柱管中轴对称波的传播和衰减。通过一个复根搜索程序对频散方程的求解得到无量纲化相速度频散曲线和衰减曲线。比较了引入损耗因子后粘弹性圆柱管与弹性圆柱管中轴对称波传播的特性。给出了圆柱管的外内径之比、损耗因子和材料参数对相速度和衰减的影响。分析结果表明与弹性圆柱管相比粘弹性圆柱管中轴对称波的各阶传播模式均存在衰减,高阶传播模式并无严格意义的截止频率。损耗因子对第一阶传播模式的相速度影响很小,而对衰减的影响则比较大,穿孔率对波传播的相速度和衰减有相当大的影响。     

基于Biot-喷射流统一模型Maxwell流体饱和孔隙介质中的弹性波

推广Biot-Tsiklauri声学模型的同时借鉴Dvorkin和Nur的工作,建立了具有任意孔径分布并顾及喷射流动机制的非牛顿流体饱和孔隙介质声学模型,研究了非牛顿流体(Maxwell流体)饱和孔隙介质中的弹性波的衰减和频散特性.着重讨论充孔隙Maxwell流体的非牛顿流效应对弹性波的频散和衰减的影响.研究表明,饱和流体的非牛顿流效应和喷射流动机制均是引起弹性波波频散和衰减的重要因素.依据非牛顿流体(Maxwell流体)饱和各向同性孔隙介质的Biot-喷射流声学模型,喷射流动只影响纵波的频散和衰减,而饱和流体的非牛顿流效应不仅影响纵波,而且还影响横波的频散和衰减.     

无限流体中孔隙介质圆柱周向导波的传播特性

为研究无限大流体约束的孔隙圆柱中周向导波的传播规律,分析孔隙参数对导波传播特性的影响,建立了无限流体中孔隙介质圆柱的理论模型,利用孔隙介质弹性波动理论,建立了周向导波频散方程,通过数值模拟计算得到无限流体中孔隙介质圆柱的频散曲线,探讨了圆柱半径和孔隙参数对导波传播特性的影响,并对导波的衰减特性进行了分析;通过数值计算,得到了周向导波的时域波形,讨论了孔隙参数对波形的影响.结果表明,孔隙介质圆柱半径的改变影响圆柱尺度,孔隙度的改变影响孔隙介质中体声波的波速,都对周向导波频散曲线产生一定的影响,所得到的频散曲线特征及衰减曲线与时域波形吻合.研究结果对开展无限流体中孔隙介质圆柱的超声无损评价提供了一定的理论参考.     

充水圆柱壳声散射的环绕波分析

研究了内部充水圆柱壳散射声场的构成。采用弹性薄壳理论和Sommerfeld-Watson变换(SWT)方法导出散射声场的解析解。数值搜索环绕波的复波数极点,比较圆柱壳体内部真空和内部充水两种情况下表面环绕波的相速度、衰减等性质。用镜反射波和环绕波的叠加合成反向散射形态函数,与简正级数解符合良好。计算流体附加环绕波的回波时序并与实验数据对照。结果表明,流体附加环绕波的再辐射是内部充水圆柱壳的形态函数出现更加丰富的共振峰和回波结构形成的重要原因。     

非均匀饱含黏性流体孔隙介质中声波传播及井孔声场分析

声波在饱含流体孔隙介质中的传播特性与流体的黏滞性及孔隙介质的非均匀性密切相关.本文在Biot理论基础上,考虑了孔隙流体的剪切应力及孔隙结构的非均匀性,采用含黏性流体孔隙介质中的波动理论,研究了孔隙介质中四种体波的频散和衰减特性,分析了慢横波对快纵波转换散射的影响,进一步推导了孔隙地层井孔中的模式波及其声场的解析解,研究了非均匀孔隙介质中井孔模式波和波列的特征.研究结果表明,含黏性流体孔隙介质中存在慢横波,慢横波的频散很强,其传播特征受到介质孔隙度、渗透率及孔隙流体黏度的影响.在非均匀孔隙介质中,与慢横波相关的剪切应力平衡过程不仅导致快纵波的频散和衰减,还会影响井孔伪瑞利波及斯通利波的传播特征.本文的工作完善了孔隙介质中声波传播的物理机制,为孔隙地层井孔声波的解释与应用提供了理论指导.     

基底上覆分层薄膜超声Scholte波特性与薄膜定征

分层薄膜-基底结构广泛应用于微电子器件等诸多领域,但薄膜材料参数超声测量尤其是横波速度的定征是一个困难的问题。本文对液固界面Scholte界面波的频散特性和脉冲激励的声压响应进行了理论分析。结果表明,液固界面Scholte波频散与分层膜-基底结构的速度分布密切相关。薄膜材料各层的厚度和横波速度对界面波频散特性有显著影响。基于Scholte界面波的频散特性,提出了一种多层膜的多参数反演定征方法。首先针对理论信号进行薄膜参数反演,验证了该方法的可行性。后续对不同类型的多层膜材料样品进行了液固界面波激发与采集实验,实验信号的薄膜参数反演结果进一步验证了该方法的可行性和有效性。     

流体-孔隙介质圆柱界面波传播特性

研究流体-孔隙介质圆柱界面波传播特性,分析孔隙介质孔隙率等参数对频散曲线的影响。理论上建立了无限大流体包裹孔隙介质圆柱界面波的模型,利用孔隙介质弹性波动理论,通过数值模拟计算得到流体-孔隙介质圆柱的频散曲线及时域波形,并分析了孔隙介质为开孔和闭孔状态下孔隙介质圆柱半径、孔隙率及渗透率对频散曲线的影响。结果表明,时域上斯通利波可以被明显区分开,孔隙介质圆柱半径的变化改变了圆柱尺度,孔隙率的变化改变了孔隙介质的纵、横波波速,因此对于斯通利波频散曲线的影响较大。而渗透率的变化既不改变圆柱的尺度也不改变孔隙层的纵、横波速度,因此对斯通利波频散曲线影响较小。     

曲线坐标系下孔隙介质圆柱纵向表面波的传播特性

为了研究孔隙介质圆柱纵向表面波的传播规律,分析其频散和衰减特性,在正交曲线坐标系下建立了表面波的频散方程,通过数值计算得到频散曲线,将纵向导波最低模态与表面波进行对比,并分析了曲率半径及孔隙参数对表面波频散和衰减的影响。结果表明,当频率足够大时,导波最低模态的频散曲线与表面波近似;在同一频率下,表面波的相速度随曲率半径的增大而增大,随孔隙度的增大而减小;表面波的衰减随孔隙度的增大而增大。研究结果为开展孔隙介质圆柱结构的超声无损评价提供了一定的理论参考。     

横波速度径向层析成像方法及应用研究

近来三维声波成像技术的一个重要进展是利用偶极子弯曲波反演地层径向横波速度剖面。确定地层径向横波速度变化对评价井壁稳定性、估算地应力和优化油藏生产等有着重要的意义。偶极横波测井激发的弯曲波低频探测较深,高频探测较浅,本文根据偶极弯曲波的频散特征,采用约束反演的方法求取地层径向横波速度变化。在实际测井中,经常会遇到偶极子弯曲波的频散曲线在高频时缺失或者不准确的情况,这会使约束反演方法产生误差。针对这一现象,本文提出利用理论频散数据进行高频约束,并通过数值模拟验证了改进后约束反演方法的正确性。本文给出了一个致密气层的横波速度径向剖面综合应用实例,发现地层径向横波速度变化程度与岩石脆性有很好的对应关系,最终的压裂效果由压前、压后正交偶极横波各向异性的变化得到了印证,压裂后油气产量提高。     

薄壁管道内壁缺陷的周向导波检测

采用半解析有限元法计算圆环周向导波频散特性,群速度的计算可以不依赖于相速度。以外径202 mm,内径200 mm的铝环为例,计算了其在2.5 MHz频率时最低阶模态的相速度、群速度和振型。进一步设计了实验方案,对选定模态导波分别经过无裂纹和径向深0.5 mm的内壁裂纹的铝环的回波波形进行了分析,通过回波的时间与声程计算群速度进而确定模态。结果表明,裂纹缺陷处会发生模式转换,通过反射回波可以较精确的定位铝环内壁的单一缺陷。     

Scattering of obliquely incident shear waves from a cylindrical cavity

Prior work has proposed the use of ultrasonic angle-beam shear wave techniques to detect cracks of varying angular location around fastener sites by generating and detecting creeping waves. To better understand the nature of the scattering problem and quantify the role of creeping waves in fastener site inspections, a 3D analytical model was developed for the propagation and scattering of an obliquely incident plane shear wave from a cylindrical cavity with arbitrary shear wave polarization. The generation and decay of the spiral creeping waves was found to be dependent on both the angle of incidence and polarization of the plane shear wave. A difference between the angle of displacement in 3D and the direction of propagation for the spiral creeping wave was observed and attributed to differences in the curvature of the cavity surface for the tangential and vertical (z) directions. Using the model, practical insight was presented on measuring the displacement response in the far-field from the hole. Both analytical and experimental results highlighted the value of the diffracted and leaky spiral creeping wave signals for nondestructive evaluation of a crack located on the cavity. Last, array and signal processing methods are discussed to improve the resolution of the weaker creeping wave signals in the presence of noise.     

激光激发瑞利波检测表面倾斜缺陷的研究

研究激光激发瑞利波检测样品的表面倾斜缺陷。基于频域热弹耦合方程,采用有限元方法建立激光激发瑞利波检测倾斜缺陷的数值模型,研究倾斜缺陷的检测机理。数值计算含不同的长度及倾斜角度缺陷的样品中瞬态位移波形,分析瑞利波在倾斜缺陷处模式转换的过程,研究各种瑞利波的传播路径。在此基础上,研究缺陷宽度与材料黏性对瑞利波传播及缺陷检测的影响。结果表明:瑞利波在缺陷处产生的反射及透射瑞利波的到达观测点的时间可以检测缺陷位置和长度,瑞利波在缺陷的底部发生模式转换产生的切变波可以检测缺陷倾斜角度。数值结果和已有的实验结果一致,从而为表面倾斜缺陷的检测提供有效的理论依据。     

Quantifying elasticity and viscosity from measurement of shear wave speed dispersion

The propagation speed of shear waves is related to frequency and the complex stiffness (shear elasticity and viscosity) of the medium. A method is presented to solve for shear elasticity and viscosity of a homogeneous medium by measuring shear wave speed dispersion. Harmonic radiation force, introduced by modulating the energy density of incident ultrasound, is used to generate cylindrical shear waves of various frequencies in a homogeneous medium. The speed of shear waves is measured from phase shift detected over the distance propagated. Measurements of shear wave speed at multiple frequencies are fit with the theoretical model to solve for the complex stiffness of the medium. Experiments in gelatin phantoms show promising results validated by an independent method. Practical considerations and challenges in possible medical applications are discussed.     

柱面Love波频散分析与SH波场的数值计算

对贴井壁环型剪切源在柱状双层弹性介质中激发的SH波场进行了理论求解,导出了柱面Love波频散方程,讨论了柱面Love波存在的条件及其区域.通过数值计算考察了柱面Love波的频散特性和激发强度,发现最低阶柱面Love波具有截止频率,这与平面半空间双层弹性介质模型下的Love波无截止频率的特征不同.渐近分析与数值考察都表明,井径r₁→∞时,柱面Love波频散方程趋向平面双层半空间的Love波方程,柱面Love波的截止频率趋于零.全波计算还显示用激发SH波来探测侵入带外原状地层的横波信息是一个十分简洁的途径..     

多通道超声兰姆波检测板状结构中的裂纹

超声兰姆(Lamb)波在结构缺陷检测方面愈来愈受到重视,但目前Lamb波的应用局限于单信号源激励,单通道接收的方法,容易受到噪声干扰,其后续的信号分析处理也比较复杂。本文旨在采用多通道Lamb波对板状结构中的裂纹进行定量分析与诊断。在铝板的表面凿刻出不同深度的凹槽作为裂纹,通过线阵换能器采集在一定传播距离内的多通道Lamb波信号,并采用二维傅里叶变换分析在不同深度的裂纹下,Lamb波模式能量的变化规律。结果表明,相对于完好铝板中的Lamb波信号,裂纹的存在会使Lamb波发生模式转换现象,并且转换模式能量百分比随裂纹深度的增加而线性增加。其结果为Lamb波评价板状结构中的裂纹状况提供了一种可能的方法。     

Dynamic stress around a cylindrical nano-inhomogeneity with an interface in a half-plane under anti-plane shear waves

Taking into account the size of the nanostructure, the effect of surface/interface stiffness on the dynamic stress around a cylindrical nano-inhomogeneity embedded in an elastic half-plane subjected to anti-plane shear waves is investigated. The boundary condition at the straight edge of the half-plane is traction free, which is satisfied by the image method. The analytical solutions of displacement fields are expressed by employing a wave function expansion method. The addition theorem for a cylindrical wave function is applied to accomplish the superposition of wave fields in the two half-planes. Analyses show that the effect of the interface properties on the dynamic stress is significantly related to the nano-scale distance between the straight edge and the center of the cylindrical nano-inhomogeneity. The frequency and incident angle of incident waves and the shear modulus ratio of the nano-inhomogeneity to matrix also show different effect on the dynamic stress distribution when the inhomogeneity shrinks to nano-scale. Comparison with the existing results is also given.     

Resonance theory of elastic wave scattering from a cylindrical cavity

Resonant excitation of a fluid-filled cylindrical cavity in an elastic medium by an incident compressional wave is investigated on the basis of the resonance theory of nuclear scattering. It is shown that the scattering amplitude consists of a series of narrow resonances super-imposed upon, and interfering with, a broad background that corresponds to the scattering from an empty cavity. The resonances may be analyzed in a most enlightening fashion by studying them separately in each partial wave of the normal-mode series. They are seen to correspond to excitations of the eigenvibrations of the cavity fluid caused by a phase-match of “creeping waves”, similar to the “Regge poles” of nuclear physics.     

Nonlinear acoustic scattering by a partially closed surface-breaking crack

A theoretical model describing the nonlinear scattering of acoustic waves by surface-breaking cracks with faces in partial contact is presented. The nonlinear properties of the crack are accounted for by suitable boundary conditions that are derived from micromechanical models of the dynamics of elastic rough surfaces in contact. Both linear and nonlinear responses of the crack are shown to be largest for a shear vertical wave incident on the surface containing the crack at an angle just above the critical angle for longitudinal waves. These findings question the fitness for the purpose of a conventional inspection method, which utilizes shear vertical waves at 45 degrees of incidence to search for surface-breaking cracks in many engineering components. For angles of incidence proximal to the critical angle of longitudinal waves, the efficiency of the second harmonic's generation appears to be the highest. Thanks to the increased sensitivity to surface-breaking cracks, this configuration seems to offer a solution to the localization problem, a task that has eluded nonlinear techniques operating under other circumstances. Finally, this model suggests a simple interpretation of the highly localized nonlinear response of delaminations in composite materials.