Comparative studies on soluble and immobilized rabbit muscle pyruvate kinase

Rabbit muscle pyruvate kinase was immobilized by covalent attachment to a polyacrylamide support (Akrilex C) containing carboxylic functional groups. As a result of immobilization, the pH optimum for catalytic activity shifted into a more alkaline direction. The apparentK _m value with phosphoenolpyruvate increased, and that with ADP slightly decreased. With respect to the stability against urea and thermal inactivation, the immobilized pyruvate kinase seemed to be the more stable at lower urea concentrations and between 45 and 55°C. At 1.5 and 2.5M urea and at higher temperature, there were no marked differences between the soluble and the immobilized enzyme.     

Comparative studies for the effect of intercalating agent on the physical properties of epoxy resin-clay based nanocomposite materials

In this study, a series of comparative studies for the effect of intercalating agent on the physical properties of the epoxy resin-clay based nanocomposite materials were performed. First, the quaternary alkylphosphonium and alkylammonium salt were both used as the intercalating agents separately for the preparation of organophilic clay through the cationic exchange reactions with Na⁺-montmorillonite clay. Subsequently, the organophilic clay was blent into the epoxy resin through in-situ thermal ring-opening polymerizations to prepare a series of polymer-clay nanocomposite (PCN) materials. The as-synthesized PCN materials were subsequently characterized by Fourier-Transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (WXRD), and transmission electron microscopy (TEM).It should be noted that the quaternary alkylphosphonium salt (Φ₃P⁺-C₁₂)-modified clay was found to show better dispersion capability than that of quaternary alkylammonium salt (Me₃N⁺-C₁₆)-modified clay existed in the polymer matrix based on the studies of WXRD and TEM. The better dispersion of (Φ₃P⁺-C₁₂)-modified clay in epoxy resin was found to lead more effectively enhanced physical property such as corrosion protection, gas barrier, mechanical strength, thermal stability, and flame retardant properties of polymers than that of (Me₃N⁺-C₁₆)-modified clay, in the form of coating and membrane, based on the measurements of a series of electrochemical corrosion parameters, gas permeability analysis (GPA), dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and limiting oxygen index (LOI), respectively. Effect of material composition on the physical properties of as-prepared materials was also investigated.     

A physical chemistry view of the activity,stability, and adsorption properties of enzymes

We examine the main results from the work of O.M. Poltorak, who made a significant contribution in the theory of enzymatic catalysis and introduced many new terms and concepts in physical chemistry.     

Impact of ionic liquid physical properties on lipase activity and stability

Lipase activity and stability was investigated in dialkylimidazolium and pyrrolidinium-based ionic liquids with a variety of anions including hexafluorophosphate, acetate, nitrate, methanesulfonate, trifluoroacetate, and trifluoromethylsulfonate. The initial rate of lipase-catalyzed transesterification of methyl methacrylate in these ionic liquids and several organic solvents was examined as well as the polytransesterification of divinyl adipate and 1,4-butanediol. Free lipase (Candida rugosa) catalyzed the transesterification of methyl methacrylate in 1-butyl-3-methylimidazolium hexafluorophosphate at a rate 1.5 times greater than in hexane. However, no detectable activity was observed in all the "hydrophilic" ionic liquids studied. Methods of enzyme stabilization including adsorption, PEG-modification, and immobilization in polyurethane foam were ineffective in improving enzymatic activity in the hydrophilic ionic liquids. Polytransesterifications performed in 1-butyl-3-methylimidazolium hexafluorophosphate using Novozym 435 produced polyesters with weight average molecular weights limited to 2900 Da due to precipitation of the polymer. Solvatochromic studies and partition coefficient measurements suggest that ionic liquids are more polar and hydrophilic than organic solvents such as hexane, acetonitrile, and tetrahydrofuran. Stability studies indicate that lipases exhibit greater stability in ionic liquids than in organic solvents including hexane.     

Influence of curing conditions on the morphology and physical properties of epoxy resins modified with a liquid polyamine

A diglycidyl ether of bisphenol-A (DGEBA) epoxy resin has been stoichiometrically cured with cycloaliphatic amine 4,4′-diamino-3,3′-dimethylcyclohexylmethane (3DCM) and modified with an amine terminated oligomer polyoxypropylenetriamine (POPTA) at a concentration of 15 wt %. Mixtures, postcured at the same temperature, have been precured at different temperatures. Phase separation takes place before gelation at all precure temperatures used. The variation in the glass transition region of the mixtures has been analyzed by dynamic mechanical measurements. Mechanical properties and fracture toughness of the modified mixtures have been related to their microstructural spherical features. Results are compared to those for the unmodified mixtures cured with different precure temperatures. © 1997 John Wiley & Sons, Inc.     

Comparative evaluation on the thermal properties and stability of MWCNT nanofluid with conventional surfactants and ionic liquid

Journal of Thermal Analysis and Calorimetry - Conventional surfactants such as CTAB (cetrimonium bromide), SDS (sodium dodecyl sulphate), SDBS (sodium dodecyl sulphonate) are combined with...     

Influence of ionizing radiation on physical properties of native and chemically modified starches

Cationic and anionic starches (chemically modified) and native starch (non-modified) were exposed to electron-beam irradiation at doses of 25, 75 and 150 kGy. The increasing solubility in water, due to chain scission and creation of polar groups as already mentioned in the literature, has been confirmed using several physical methodologies. Impedance Spectroscopy (IS) on water solutions was carried out in order to calculate the relaxation parameters of the Cole–Cole model and α and β parameters of the Jones–Dole equation, which show the influence of radiation dose on increasing polarity, decreasing of molecular mass and increasing of electrostatic attraction between chains. Infra-red spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC) confirm the formation of polar groups that retain water. The aim of this work was to confirm that the control of chain scission and functionalization of starches with irradiation could then be used in a future work to create nanoparticles by complex coacervation in an aqueous base.     

Comparative studies on the DNA-binding properties of linear and angular dibenzoquinolizinium ions

The interaction of the linear dibenzo[b,g]quinolizinium (5a) and the angular dibenzo[a,f]quinolizinium (6) with DNA was studied in detail in order to evaluate the influence of the shape of polycyclic quinolizinium ions on their DNA-binding properties. First, the synthesis and the thermally induced dimerization of 5a were reinvestigated because the preparation and isolation of the bromide salt of 5a according to literature procedures turned out to be problematic. The dibenzo[b,g]quinolizinium bromide [5a(Br)] tends to dimerize in solution with a highly selective and unprecedented formation of the corresponding anti-head-to-head dimer. Nevertheless, it was observed that careful exclusion of bromide ions from the reaction mixture suppresses the formation of the dimer. Moreover, the dimer may be transformed to the monomer by a remarkably rapid photoinduced electron-transfer reaction with 1-methoxynaphthalene. The association of 5a and 6 with nucleic acids was investigated by spectrophotometric and spectrofluorimetric DNA titrations, CD and LD spectroscopy, DNA thermal denaturation studies, and competition-dialysis techniques. Both dibenzoquinolizinium ions 5a and 6 exhibit an intercalative mode of binding to double-stranded DNA with moderate binding constants (K = 1-7 x 10(5) M(-1)) and a slight preference for association with GC-rich DNA regions. The structures of the intercalation complexes were calculated by molecular modeling methods. Competition-dialysis studies reveal that the isomers 5a and 6 bind selectively to triple-helical DNA (poly[dA]-poly[dT]2) as compared to selected synthetic and native double-stranded nucleic acids. Notably, the selectivity of the linear dibenzo[b,g]quinolizinium 5a toward triplex DNA is higher than the one of the angular derivative 6. In contrast, the DNA thermal denaturation studies reveal a higher stabilization of triple-helical DNA in the presence of 6 (DeltaTm3-->2 = 28 degrees C at r = 0.5) as compared to the stabilization by 5a (DeltaTm3-->2 = 14 degrees C at r = 0.5). This comparison emphasizes the importance of the extended pi system for the interaction of annelated quinolizinium ions with DNA. Moreover, the comparison between 5a and 6 demonstrates the significant influence of the shape of the pi system on the duplex- and triplex-stabilizing properties of the dibenzoquinolizinium ions.     

Computational studies on structural and excited-state properties of modified chlorophyll f with various axial ligands

Time-dependent density functional theory (TDDFT) calculations have been used to understand the excited-state properties of modified chlorophyll f (Chlide f), Chlide a, Chlide b, and axial ligated (with imidazole, H(2)O, CH(3)OH, CH(3)COOH, C(6)H(5)OH) Chlide f molecules. The computed differences among the Q(x), Q(y), B(x), and B(y) band absorbance wavelengths of Chlide a, b, and f molecules are found to be comparable with the experimentally observed shifts for these bands in chlorophyll a (chl a), chl b, and chl f molecules. Our computations provide evidence that the red shift in the Q(y) band of chl f is due to the extended delocalization of macrocycle chlorin ring because of the presence of the -CHO group. The local contribution from the -CHO substituent to the macrocycle chlorin ring stabilizes the corresponding molecular orbitals (lowest unoccupied molecular orbital (LUMO) of the Chlide f and LUMO-1 of the Chlide b). All the absorption bands of Chlide f shift to higher wavelengths on the addition of axial ligands. Computed redox potentials show that, among the axial ligated Chlide f molecules, Chlide f-imidazole acts as a good electron donor and Chlide f-CH(3)COOH acts as a good electron acceptor.     

Lactoferrin from human breast milk and from neutrophil granulocytes. Comparative studies of isolation, quantitation, characterization and iron binding properties

The isolation and properties of lactoferrin from human breast milk and from neutrophilic granulocytes were investigated. Human breast milk lactoferrin was purified by means of heparin-sepharose or Cibacron Blue affinity chromatography. Quantitative recovery using these two methods was comparable but Cibacron Blue affinity chromatography allowed for isolation of a more homogenous protein. Lactoferrin could only be isolated from human neutrophilic granulocytes by sequential use of antibody affinity followed by non-specific affinity chromatography. Both breast milk lactoferrin and granulocyte lactoferrin were separated into apo and iron-rich species by SDS polyacrylamide gel chromatography. Iron binding is accompanied by a conformational change in tertiary structure associated with more rapid electrophoretic migration. The isoelectric point of both human breast milk lactoferrin and human granulocyte lactoferrin is 5.5-6.2. Both types of lactoferrin have similar iron binding properties with release of iron from the one binding site occurring at pH 5.2-6.0 while the other binding site holds on to iron down to pH 3.6-3.2. Despite the high affinity for iron the percentage saturation of native lactoferrin is low, that for breast milk lactoferrin averaging 12-25% and that for granulocyte lactoferrin less than 10%.     

Thermal stability and UV-shielding properties of polymethyl methacrylate and polystyrene modified with calcium carbonate nanoparticles

The influences of nanosized CaCO₃ on the thermal and optical properties embedded in poly(methyl methacrylate) (PMMA) and polystyrene (PS) were investigated. Calcium carbonate nanoparticles were synthesized by in situ deposition technique, and its nano size (32–35 nm) was confirmed by scanning electron microscope (SEM) and X-ray studies. Nanocomposites samples of PMMA/CaCO₃ and PS/CaCO₃ were prepared with different filler loading (0–4 wt%) of CaCO₃ nanoparticles by solution mixing technique. The Fourier transform infrared analysis confirmed that CaCO₃ nanoparticles were present in the polymers matrices. The morphology and elemental composition of nanocomposites were evaluated by SEM and energy dispersive X-ray spectroscopy. The thermal properties of nanocomposites were characterized by differential scanning calorimetric, thermogravimetric, and differential thermogravimetry analysis, and the results indicate that the incorporation of CaCO₃ nanoparticles could significantly improve the thermal properties of PMMA/CaCO₃ and PS/CaCO₃ nanocomposites. The glass transition temperature (T _g ) and decomposition temperature (T _d ) of nanocomposites with 4 wt% of CaCO₃ nanoparticles were increased by 30 and 24 K in case of PMMA/CaCO₃ and 32  and 15 K in the case of PS/CaCO₃ nanocomposites, respectively. The obtained transparent nanocomposites films were characterized using UV–Vis spectrophotometer which shows the transparencies of nanocomposites are almost maintained in visible region while the intensity of absorption band in ultraviolet (UV) region is increased with CaCO₃ nanoparticles contents and these composites particles could enhance the UV-shielding properties of polymers.     

多硝基甲烷Mannich碱稳定性的理论研究

用MNDO SCF-MO方法全优化了系列多硝基甲烷Mannich碱的几何构型, 计算了它们的电子结构。在胺、醛组分相同时, 标题物>N-CH2-Y的特征键CH2-Y的键级随酸组分亲核性的增强而增大。该CH2-Y键级较小是造成Mannich碱在溶液中不稳定的重要原因。C-NO2键的键级在分子中较小, 可能是热或光解等受激分解的引发键, 从电子结构特征上阐明了以硝仿为酸组分的Mannich碱稳定性较差的原因。     

Donor-acceptor properties, catalytic activity, and negative charge exoemission from the alumina surface modified with lithium cations

Donor-acceptor properties of alumina modified with lithium cations were studied by ESR of paramagnetic complexes of adsorbed anthraquinone. The results were compared with the data on negative ion emission (exoemission) accompanying the decomposition of isopropyl alcohol in the adsorption layer. The data on the activity measured by the pulse microcatalytic technique in isopropyl alcohol decomposition are discussed. Small additives of lithium were found to promote catalytic activity of the samples. The role of acid and basic sites in isopropyl alcohol decomposition was discussed. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 616–621, April, 2006.     

Reevaluation of the structure and fundamental physical properties of dawsonites by DFT studies

Dawsonite-type compounds, with the general formula MAlCO(3)(OH)(2), where M = Na(+), K(+), or NH(4)(+), recently have become attractive materials because of their potential interest in geochemical CO(2) sequestration, CO(2) capture in power plants, and heterogeneous catalysis. However, the number of studies assessing the properties of these materials is limited. In the present paper, we report a theoretical reevaluation of the structural and essential physicochemical properties of Na-, K-, and NH(4)-dawsonites as determined by density functional theory (DFT) investigations. The calculated structure of Na- and K-dawsonites is in good agreement with previous data, while for NH(4)AlCO(3)(OH)(2), the calculations suggest orientation disorder of the ammonium ions in the structure. The normal-mode analysis, electronic and bonding properties, and elastic properties are reported for the three analogue dawsonites. The calculated formation enthalpy is -1714, -1699, and -1655 kJ/mol for K-, Na-, and NH(4)-dawsonite, respectively. This study comprises a first step toward a better understanding of the diversity of dawsonite intrinsic properties, which is required to tune their practical applications.     

Influence of the size and the attached organic tail of modified detonation nanodiamond on the physical properties of liquid crystals

For the functionalisation of the detonation nanodiamond (DND), we attached via grafting carboxylate groups, leading to only one of such groups per 5000–6000 carbon units. Activation of the COOH-surface functionalised groups allowed the attachment of various organic tails. Dielectric and electro-optical properties of nematic liquid crystalline mixtures (LCMs) doped with modified DND (MDND) have been investigated. It is established that the effect of MDND on the dielectric properties of the LCMs depends on the size of the nanoparticles and the type of rod-like elongated organic molecules attached to the MDND. It was found that nanoparticles of small size (4–5 nm) do not significantly affect the parameters of LCMs. At the same time, the conglomerates based on MDND of about 50 nm or about 100 nm in diameter can increase or decrease the dielectric anisotropy and the response time of LCMs to about 1.5–2.5 times, depending on the polarity of the tails.     

Bienzymatic supramolecular complex of catalase modified with cyclodextrin-branched carboxymethylcellulose and superoxide dismutase: stability and anti-inflammatory properties

A bienzymatic supramolecular assembly of CAT and SOD is reported. CAT was chemically glycosilated with CD branched CMC and then associated with SOD modified with 1-adamantane carboxylic acid. SOD was remarkably resistant to inactivation by H(2)O(2) and its anti-inflammatory activity was 4.5-fold increased after supramolecular association with the modified CAT form. [structure: see text]