Simultaneous electrophoretic analysis of proteins of very high and low molecular mass using Tris‐acetate polyacrylamide gels

To separate and analyze giant and small proteins in the same electrophoresis gel, we have used a 3–15% polyacrylamide gradient gel containing 2.6% of the crosslinker bisacrylamide and 0.2 M of Tris‐acetate buffer (pH 7.0). Samples were prepared in a sample buffer containing lithium dodecyl sulphate and were run in the gel described above using Tris‐Tricine‐SDS‐sodium bisulfite buffer, pH 8.2, as electrophoresis buffer. Here, we show that this system can be successfully used for general applications of SDS‐PAGE such as CBB staining and immunoblot. Thus, by using Tris‐acetate 3–15% polyacrylamide gels, it is possible to simultaneously analyze proteins, in the mass range of 10–500 kDa, such as HERC1 (532 kDa), HERC2 (528 kDa), mTOR (289 kDa), Clathrin heavy chain (192 kDa), RSK (90 kDa), S6K (70 kDa), β‐actin (42 kDa), Ran (24 kDa) and LC3 (18 kDa). This system is highly sensitive since it allows detection from as low as 10 μg of total protein per lane. Moreover, it has a good resolution, low cost, high reproducibility and allows for analysis of proteins in a wide range of weights within a short period of time. All these features together with the use of a standard electrophoresis apparatus make the Tris‐acetate‐PAGE system a very helpful tool for protein analysis.     

High resolution electrophoresis of soybean seed isoesterases

A modified discontinuous buffer system for vertical polyacrylamide electrophoresis was developed with large changes in component concentration from the original Tris-HCl/Tris-glycine system of the Ornstein-Davis type. The new buffer system is able to resolve the fast soybean seed isoesterases crucial for cultivar discrimination. A higher number of anodic bands is obtained in comparison with separations under standard conditions. A "gelating boundary", resulting from the aggregation of seed proteins, is retarded and does not migrate out of the upper stacking gel. The same buffer modification is also beneficial to the separation of native seed proteins.     

A robust two-dimensional separation for top-down tandem mass spectrometry of the low-mass proteome

For fractionation of intact proteins by molecular weight (MW), a sharply improved two-dimensional (2D) separation is presented to drive reproducible and robust fractionation before top-down mass spectrometry of complex mixtures. The “GELFrEE” (i.e., gel-eluted liquid fraction entrapment electrophoresis) approach is implemented by use of Tris-glycine and Tris-tricine gel systems applied to human cytosolic and nuclear extracts from HeLa S3 cells, to achieve a MW-based fractionation of proteins from 5 to >100 kDa in 1 h. For top-down tandem mass spectroscopy (MS/MS) of the low-mass proteome (5–25 kDa), between 5 and 8 gel-elution (GE) fractions are sampled by nanocapillary-LC-MS/MS with 12 or 14.5 tesla Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometers. Single injections give about 40 detectable proteins, about half of which yield automated ProSight identifications. Reproducibility metrics of the system are presented, along with comparative analysis of protein targets in mitotic versus asynchronous cells. We forward this basic 2D approach to facilitate wider implementation of top-down mass spectrometry and a variety of other protein separation and/or characterization approaches.     

A novel Bicine running buffer system for doubled sodium dodecyl sulfate - polyacrylamide gel electrophoresis of membrane proteins

A novel, Bicine-based SDS-PAGE buffer system was developed for the analysis of membrane proteins. The method involves molecular weight-based separations of fully denatured and solubilized proteins in two dimensions. This doubled SDS-PAGE (dSDS-PAGE) approach produced a diagonal arrangement of protein spots and successfully circumvented problems associated with membrane proteome analysis involving traditional gel-based methods. Membrane proteins from the anaerobic bacterium Clostridium thermocellum were used for these investigations. Tricine-dSDS-PAGE and the newly developed Bicine-dSDS-PAGE were compared with the standard glycine-dSDS-PAGE (Laemmli protocol) in their suitability to separate C. thermocellum membrane proteins. Large-format gel experiments using optimized gel preparation and running buffer conditions revealed a 112% increase in protein spot count for Tricine-dSDS-PAGE and a 151% increase for Bicine-dSDS-PAGE, compared to glycine-dSDS-PAGE. The data clearly indicated that Bicine-dSDS-PAGE is a superior method for the analysis of membrane proteins, providing enhanced resolution and protein representation.     

Nanotube-grafted polyacrylamide hydrogels for electrophoretic protein separation

Multiwalled carbon nanotube-modified polyacrylamide gels have been employed for the electrophoretic separation of proteins. Two approaches are compared in this investigation, one using nanotubes only as fillers inside the gel matrix and the other using nanotubes as catalyst for polymerization of acrylamide. In both the cases, polymerization of acryl-amide/bisacrylamide has been carried out in situ in the presence of nanotubes dispersed in the gel buffer containing monomer and cross-linker. In the former case, initiator and catalyst have been added after ultrasonication of nanotubes in the gel buffer mixture where the nanotubes play the role of filler. On the other hand, the second approach precludes use of catalyst and involves addition of initiator alone during ultrasonication of nanotubes in the gel buffer containing monomer and cross-linker, which leads to the formation of nanotube-grafted gel after 25 min. When nanotubes are used as a catalyst instead of N,N,N',N'-tetramethylethylenediamine, pore size distribution of the gel matrix and linearity of molecular weight calibration plots are found to be improved. In addition, other issues associated with the use of an external catalyst like handling the moisture-sensitive and corrosive reagent and associated irreproducibility are addressed in this approach.     

SDS disc electrophoresis of proteins in homogeneous, low-concentrated polyacrylamide gels

In the attempt to separate in a single gel run low- and high-molecular-weight proteins, we present here a multiphasic buffer system designed for this purpose. It avoids the continuous stacking of SDS as it occurs in the 'classical' SDS-PAGE. The system allows complete stacking and destacking of proteins in the 3.5-250 kDa range at acrylamide concentrations as low as 4.5% T (total acrylamide concentration in %) and 2.6% C (degree of cross-linking in %). Taurine is used as the trailing ion in the cathode buffer and in the resolving zone of the gel, and two different counterions (Tris and imidazole) in the stacking zone. The gel system is easy to prepare and, due to the very low acrylamide concentrations, it is ideal for analytical as well as for preparative tasks.     

Electrophoretic techniques in element species analysis. Comparison between flow-through and flat-bed techniques

A comparison of electrophoretic techniques for the separation of metal-protein complexes from food extracts is described. A preparative flow-through electrophoresis system with continuous elution of the fractionated substances and an analytical flat-bed gel electrophoresis technique with off-line electro-elution are optimized with regard to this separation problem. The metal-protein complexes are extracted from four flour samples using Tris-glycine buffer (pH 8.3). For the separation, polyacrylamide gels of 14% T and 3% C are prepared and Tris-HCl (pH 8.9) is used as an electrophoresis buffer. For a soy bean flour, not only the separation of protein fractions is achieved but also the metal distribution patterns that are determined by flame atomic absorption spectrometry are given. The results show that the use of the flow-through technique is limited to special fields of application, whereas the flat-bed electrophoresis with subsequent electro-elution of metal-protein complexes is a useful technique in element species analysis.     

Carbon nanotubes-assisted polyacrylamide gel electrophoresis for enhanced separation of human serum proteins and application in liverish diagnosis

The application of pore-gradient polyacrylamide gel electrophoresis (PG-PAGE) incorporated with carbon nanotube modified by Triton X-100 and carboxylation so as to improve the separation of human serum proteins is reported. The novel PG-PAGE was made by adding water-soluble single-walled carbon nanotubes (CNTs) when preparing the polyacrylamide gel. Significant improvements in separation of complement C3 protein and haptoglobin (Hp) in human serum were achieved. It was estimated that the interactions between the hydrophilic groups on the proteins and the surface of the CNTs result in different adsorption kinetics of complement C3 and Hp subtype on the nanoparticles incorporated in the gel, thus enhancing the separation of the two proteins in serum. This new CNT matrix-assisted PG-PAGE method for enhanced separation of complement C3 and Hp in human serum was successfully applied to distinguish the samples from liverish patients and healthy people.     

Peptide fractionation by acid pH SDS-free electrophoresis

SDS-free polyacrylamide gel electrophoresis is an effective alternative approach to peptide fractionation. Here we describe a discontinuous buffer system at acid pH that improves the separation of acidic peptides from tryptic digestion. MOPS and chloride act as trailing and leading ions, respectively, in this system, while histidine operates as counterion and buffers all solutions. In these electrophoretic conditions, peptides with pI below 5.5 migrate with low overall electrophoretic mobilities but high differences from one another, which allows for their efficient resolution. In silico analysis of several proteomes shows that the acid pH system allows a peptide simplification of 2.5-fold with respect to the total peptide mixture, and still a proteome coverage of about 95% is achievable. A straightforward method with a protocol including proteomic studies was achieved for SDS-PAGE of proteins, enzyme treatment and further peptide fractionation by SDS-free acid PAGE.     

Ion-exchange separation of proteins by polyallylamine-grafted cellulose gel

A cellulose-based anion exchanger bearing water-soluble polycation was tested for separation of proteins. The exchanger was obtained by partial oxidation of cellulose gel by aq. NaIO4 followed by Schiff base formation with polyallylamine (PAA, molecular mass 5000). The retention behavior of proteins for three grades of PAA-cellulose gels, with amino group contents of 0.35, 0.59 and 0.96 mmol/g cellulose, was examined at several pH values and compared with that for conventional DEAE-cellulose gel with amino group content of 1.07 mmol/g cellulose. The retention of proteins by PAA-cellulose gels was remarkably greater than that for the DEAE-cellulose gel. Pairs of proteins having close isoelectric points and molecular masses (human and bovine serum albumins; beta-lactoglobulin A and B) could be separated by the PAA-cellulose gel columns. Such efficiency can be ascribed to high local density of grafted polyallylamine, in contrast to the random and sparse charge distribution in DEAE-cellulose.     

A new multiphasic buffer system for benzyldimethyl-n-hexadecylammonium chloride polyacrylamide gel electrophoresis of proteins providing efficient stacking

Acidic PAGE systems using cationic detergents such as benzyldimethyl-n-hexadecylammonium chloride (16-BAC) or CTAB have proven useful for the detection of methoxy esters sensitive to alkaline pH, resolving basic proteins such as histones and membrane proteins. However, the interesting phosphate-based system suffered from poor stacking, resulting in broadened bands and long running times. Therefore, a new 16-BAC PAGE system based on the theory of moving boundary electrophoresis with properties comparable to the classical SDS-PAGE system was designed. As a result a new multiphasic analytical 16-BAC PAGE system providing efficient stacking and significantly shorter running times is presented here. It is based on acetic acid and methoxyacetic acid as common ion constituents. This PAGE system takes advantage of the additional counter stacking effect due to a cross boundary electrophoresis system resulting from the selected buffer constituents. Furthermore, the concentration of 16-BAC was optimized by determining its previously unknown CMC. Due to efficient focusing of the introduced tracking dye, methyl green, termination of electrophoresis can now be more easily followed as compared to the Schlieren line.     

Effect of buffer flow on DNA separation in a microfabricated electrophoresis system

An adequate buffer reservoir is one essential component of an electrophoresis system, providing current carrying ions and maintaining constant pH. In a microfabricated DNA separation system with on-chip electrodes, the amount of buffer used is limited by the design of the device; the buffer continuity can be easily disturbed by the production of bubbles. Continuously flowing 1 x Tris-borate-EDTA (TBE) buffer over the electrodes at the cathodic end solves both problems. This flow increases the resolution for ssDNA primer separations (21 and 25 bases) to a maximum value of 1.4 within a distance of 1.2 cm, about four times higher than that without flow. Similar improvement has been achieved for dsDNA separation (20 bp ladder; BioRad) at a distance of only 0.4 cm, giving baseline resolution for bands from 20 to 240 bp. We have also investigated the effect of buffer concentration on resolution, and no similar improvement can be obtained by merely increasing the buffer concentration without flow.     

2-D native-PAGE/SDS-PAGE visualization of an oligomer's subunits: application to the analysis of IgG

A 2-D native-PAGE/SDS-PAGE method for detecting the subunit components of protein oligomers at low picomole sensitivity is presented. IgG was electrophoresed in a native acidic polyacrylamide gel in amounts ranging from 51 pmol to 60 fmol. Silver-staining (native fast silver stain, ammoniacal silver stain, permanganate silver stain), Coomassie-staining (R-250, G-250), metal ion-reverse-staining (zinc, copper), and fluorescent chromophore-staining (SYPRO Ruby) methods were used to visualize the IgG oligomers. The protein zones were then excised, separated by SDS-PAGE, and subunits visualized with a permanganate silver stain. The Coomassie R-250/permanganate silver-staining combination detected IgG subunits using 2 pmol of sample. Coomassie G-250 and native fast silver staining in the first-dimensional gel produced detectable subunits in the second-dimensional separation at 3 and 13 pmol, respectively. Staining with silver (ammoniacal, permanganate), copper, zinc, or SYPRO Ruby in the first-dimensional gel did not produce discernible subunits in the second-dimensional gels due to protein streaking or protein immobilization in the native gel. When using a 2-D native-PAGE/SDS-PAGE system, Coomassie staining of the first-dimensional native gel combined with permanganate silver staining of the second-dimensional denaturing gel provides the most sensitive method (2-3 pmol) for visualizing constituent subunits from their oligomeric assemblies.     

Simultaneous electrophoretic analysis of proteins of very high and low molecular weights using low-percentage acrylamide gel and a gradient SDS-PAGE gel

To be able to separate and analyze giant proteins and small proteins in the same electrophoretic gel, we have used a continuous SDS-PAGE gel formed by the combination of a low-percentage acrylamide gel and a gradient SDS-PAGE gel that we have named LAG gel. To get a good resolution for proteins of more than 200 kDa, we used an acrylamide/bisacrylamide ratio of 80:1 in the low-percentage acrylamide gel. To successfully resolve proteins in the 5-200 kDa range, we used a conventional 6-15% SDS-PAGE gradient gel with the standard acrylamide/bisacrylamide ratio of 40:1. We show that the LAG system can be successfully used in general applications of SDS-PAGE electrophoresis such as proteomics and immunobloting techniques. Thus, using this continuous LAG gel, it is possible to simultaneously analyze giant proteins, such as HERC1 and dynein, big proteins like clathrin heavy chain and small proteins like ARF. The LAG system has a good resolution, low cost, and high reproducibility. Moreover, to simultaneously analyze all proteins saves time. All these characteristics, together with the use of a standard apparatus found in any biochemistry laboratory, make the LAG system an easy tool to use.     

An improved sodium dodecyl sulfate-polyacrylamide gel electrophoresis system for the analysis of membrane protein complexes

Membrane protein complexes such as the reaction center complexes of oxygenic photosynthesis or the complex I of mitochondira are composed of many subunit polypeptides. To analyze their polypeptide compositions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), a wide range of molecular sizes has to be resolved, especially in the low molecular mass range. We have improved the traditional Tris/HCI buffer systems adopting a Tris/2-(N-morpholino)ethanesulfonic acid (MES) buffer system containing 6 M urea. This gel system was used with an 18-24% acrylamide gradient for the separation of polypeptides with molecular masses from below 5 kDa to over 100 kDa. This buffer system can also be applied to the usual uniform concentration of acrylamide gel and also to minislab gels.     

Ionic liquid-assisted SDS-PAGE to improve human serum protein separation

Ionic liquid (IL)-assisted sodium dodecyl sulfate polyacrylamide gel electrophoresis (ILs-SDS-PAGE) was presented to improve protein separation. ILs were employed during the preparation process of polyacrylamide gel, then the modified gel was used for commercial protein marker, binary bovine serum albumin/lysozyme (BSA/Lyz) and human serum separation. The influence of ionic liquid concentration, cation alkyl chain length, cation and anion types on proteins separation were investigated. The results showed that ILs played a role in improving some protein separation, and ILs-SDS-PAGE provided higher resolution and separation efficiency than ordinary SDS-PAGE for low and middle relative molecular mass proteins in human serum. In addition, the principle of ILs-SDS-PAGE was discussed and the comparison of ILs-SDS-PAGE with ordinary SDS-PAGE and Native PAGE was made.     

血清中低分子量蛋白质的提取和鉴定

采用改进的圆盘凝胶电泳提取人血清中低分子量蛋白质, 去除了血清中分子量大于3×104的蛋白质, 将提取的低分子量蛋白质热变性后直接在溶液中酶解成肽, 经液相色谱-质谱分析, 并进行Mascot数据库检索, 确认出人血清中97种蛋白质.     

Discontinuous native protein gel electrophoresis

Analysis of the oligomeric state of a native protein usually requires analytical ultracentrifugation or repeated gel filtration to calculate the protein's size. We have developed a discontinuous native protein gel electrophoresis system that allows the separation of even basic proteins according to their size, oligomeric state, and shape. This gel system combines the addition of negative charges to the proteins by Serva Blue G with a discontinuous buffer system and gradient gels. As in SDS-PAGE, chloride constitutes the high mobility anion in the gel and anode buffer. However, for sample focusing this system employs histidine instead of glycine as the slow dipolar ion following from the cathode buffer to improve migration of basic proteins. In addition, proteins run into gel pores corresponding to their size and shape in the gradient gel. Using this gel system, we show that the polypyrimidine tract-binding protein (PTB) is a monomer.     

Native horizontal ultrathin polyacrylamide gel electrophoresis of proteins under basic and acidic conditions.

The preparation of homogeneous ultrathin native polyacrylamide gels, using a basic as well as an acidic buffer system is described. The basic buffer system consists of Tris-HC1/Tris-glycine, the same buffer as in sodium dodecyl sulfate (SDS)-gel electrophoresis but without SDS. The acidic system uses potassium acetate, pH 4.3, as gel buffer and beta-alanine, pH 4.6, acetic acid as electrolytes. The gels are covalently bound on glass plates. Binding of acidic gels requires a special pretreatment of glass plates. The whole procedure is simple and extraordinarily fast: 100-120 min from the start of gel preparation to the end of electrophoresis. Coomassie staining is done in 40 min and silver staining in 90 min. The native gels are excellently suited for diffusion blotting. Further attractive properties of these gels are easy handling, simple drying and dimensional stability.     

Automated free-solution isotachophoresis: Instrumentation and fractionation of human serum proteins

An automated free-solution isotachophoresis system (FS-ITP) for preparative fractionation of biopolymers is described, operated in a batch mode. The dimension of the separation chamber allows an up to 1200-fold higher sample load compared to separation in capillaries of 180 μm inner diameter as used in analytical capillary isotachophoresis (C-ITP). The preparative capacity of the system is within the milligram range. The method is fully compatible with analytical C-ITP, which is essential for preparative-scale isotachophoresis with regard to optimization of electrolyte systems and the search for suitable spacers. As a model application the fractionation of human serum proteins is reported. The collected fractions were analyzed by C-ITP and agarose gel electrophoresis.