Stable containment of radionuclides on the nanoscale by cut single-wall carbon nanotubes

The physisorption of radiolabeled (125)I(-) ions from aqueous solution and the Brunauer-Emmett-Teller (BET) surface areas of various carbonaceous materials [HiPco single-wall carbon nanotubes (SWNTs), F-SWNTs, cut SWNTs, charcoal, graphite, F-graphite and C(60)] have been measured and compared. By far, cut SWNTs (mainly 20-50 nm lengths) displayed the largest surface area of the materials (1180 m(2).g(-1)), being approximately double that of uncut SWNT and charcoal. At low concentrations of (125)I(-), nearly all of the (125)I(-) was adsorbed from aqueous solution within 1 min at room temperature by the cut SWNTs, uncut SWNTs, and charcoal; the other materials showed much less adsorption under the same conditions. Once adsorbed, the (125)I(-) wash-off rate by pure water was highly variable but was especially slow for cut SWNTs (t(1/2) approximately 2720 h) compared to the other materials; wash-off of (125)I(-) by an aqueous H(2)O(2) solution was even slower (t(1/2) approximately 14 300 h). Taken together, these data demonstrate the greatly increased surface area and dramatically enhanced retention properties of cut SWNTs over uncut SWNTs.     

Optically sensing additional sonication effects on dispersed HiPco nanotubes in aerated water

Ultrasonication is a necessary process to make single-walled carbon nanotubes (SWNTs) soluble in aqueous solution with surfactants such as sodium dodecyl sulfate (SDS). However, an understanding of the sonication effects on the electronic and optical properties of SWNTs in aqueous solution is still lacking. Here, we have observed that sonication-induced pH changes suppress the optical transitions of the first interband transition pair (S11) in the density of states of semiconducting SWNTs while other possible intermediates induced by sonication contribute less significantly to the observed spectral changes without the involvement of sonication-induced pH decrease. The suppressed S11 peaks can be restored by adding basic solution, suggesting that the lattice structure of SWNTs is undisrupted by the sonication used here. The absorbance of S11 peaks shows a nearly linear relationship with sonication-induced pH changes in the narrow pH range of 5.2 and 6.1. The results indicate that SDS-encased SWNTs may be used as an indicator for sonolysis-related applications.     

Solubilization of single-walled carbon nanotubes by using polycyclic aromatic ammonium amphiphiles in water--strategy for the design of high-performance solubilizers

We describe the design of polycyclic aromatic compounds with high performance that dissolve single-walled carbon nanotubes (SWNTs). Synthetic amphiphiles trimethyl-(2-oxo-2-phenylethyl)-ammonium bromide (1) and trimethyl-(2-naphthalen-2-yl-2-oxo-ethyl)-ammonium bromide (2) carrying a phenyl or a naphtyl moiety were not able to dissolve/disperse SWNTs in water. By contrast, trimethyl-(2-oxo-2-phenanthren-9-yl-ethyl)-ammonium bromide (3) solubilized SWNTs, although the solubilization ability was lower than that of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (4) (solubilization behavior observed by using 4 was described briefly in reference 4a). Transmission electron microscopy (TEM), as well as visible/near-IR, fluorescence, and near-IR photoluminescence spectroscopies were employed to reveal the solubilization properties of 4 in water, and to compare these results with those obtained by using sodium dodecyl sulfate (SDS) and hexadecyltrimethylammonium bromide (HTAB) as solubilizers. Compound 4 solubilized both the as-produced SWNTs (raw-SWNTs) and purified SWNTs under mild experimental conditions, and the solubilization ability was better than that of SDS and HTAB. Near-IR photoluminescence measurements revealed that the chiral indices of the SWNTs dissolved in an aqueous solution of 4 were quite different from those obtained by using micelles of SDS and HTAB; for a SWNTs/4 solution, the intensity of the (7,6), (9,5), and (12,1) indices were strong and the chirality distribution was narrower than those of the micellar solutions. This indicates that the aqueous solution of 4 has a tendency to dissolve semiconducting SWNTs with diameters in the range of 0.89-1.0 nm, which are larger than those SWNTs (0.76-0.97 nm) dissolved in the aqueous micelles of SDS and HTAB.     

Dissociation of electrolytes in a nano-aqueous system within single-wall carbon nanotubes

Research on material incorporation within single-wall carbon nanotubes (SWNTs) through aqueous solutions of various electrolytes is performed for the purpose of providing a foundation for future application of SWNTs to, for example, drug delivery systems. We have determined that the optical spectra of SWNTs were significantly affected when SWNTs that had opened holes or removed caps were treated through immersion in an aqueous solution of electrolytes, followed by drying at room temperature; however, the spectra of SWNTs without opened holes or removed caps were not subjected to such treatment. We infer that when the sucked solutions remained inside the tubes, even after drying (the nano-aqueous system), the electrolyte was dissociated into ions, which was likely to change the electronic states of SWNTs. On the other hand, when the SWNTs were well-dried under vacuum, no remarkable changes in their optical spectra were observed.     

Water-solubilization of nucleotides-coated single-walled carbon nanotubes using a high-speed vibration milling technique

[reaction: see text] Pristine single-walled carbon nanotubes (SWNTs) and nucleotides mixed using a mechanochemical high-speed vibration milling technique (HSVM) are soluble in an aqueous solution, and the solubilities of SWNTs depend significantly on the number of phosphate groups and the kinds of bases employed.     

Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.     

Concentration and temperature controlled oxidation and cutting of single-walled carbon nanotubes by ammonium persulfate

Science China Chemistry - SWNTs were oxidized by a simple wet chemical method involving treatment in aqueous ammonium persulfate (APS) solution at a certain temperature. Fourier transform infrared...     

Dispersing carbon nanotubes using surfactants

We review the recent advances in dispersing single-wall carbon nanotubes (SWNTs) using amphiphilic surfactants in aqueous solutions. Three aspects are discussed. (1) On the organization of surfactant molecules with SWNTs, new insights at the microscopic level arise from electron microscopy and detailed computer simulation studies. (2) Quantitative measurements, such as molecular interactions between functional groups and SWNTs, the coverage of surfactant on SWNTs in solution, the charge state of the SWNT/surfactant complex, and the degree of dispersion are critical for better understanding dispersion mechanisms and for the further development of dispersion strategies. (3) The thermodynamic driving forces and the role of metastability in the structure of surfactant dispersed SWNT suspensions are analyzed. An outlook on practical and fundamental issues is also presented.     

Changes in the fluorescence spectrum of individual single-wall carbon nanotubes induced by light-assisted oxidation with hydroperoxide

Through fluorescence-spectrum measurements, we investigated the effects of light-assisted oxidation with H2O2 (LAOx) on single-wall carbon nanotubes (SWNTs) that were individually dispersed in an aqueous solution of surfactant. The intensities of the fluorescence spectra were decreased remarkably by the LAOx when the light's wavelength was 400-500 nm and a little when 600-700 nm. The spectrum intensity did not recover even when the pH was restored to an original value of 6.5. The spectra changed little when the LAOx wavelength was 500-600 nm or the light was not irradiated. In addition, the effect of LAOx on SWNTs was related to the diameters of SWNTs. We inferred that these phenomena reflected that H2O2 was dissociated by absorbing the fluorescence light emitted from optically excited SWNTs, which, in turn, accelerated the burning out of SWNTs.     

Noncovalent functionalization of DNA-wrapped single-walled carbon nanotubes with platinum-based DNA cross-linkers

A method for noncovalent functionalization of DNA-wrapped single-walled carbon nanotubes (SWNTs) using platinum-based DNA cross-linkers is investigated. In particular, cisplatin and potassium tetrachloroplatinate are shown to bind to DNA that encapsulates SWNTs in aqueous solution. The bound platinum salt can then be reduced to decorate the DNA-encapsulated SWNTs with platinum nanoparticles. The resulting SWNT/DNA/Pt hybrids are investigated by optical absorption spectroscopy, circular dichroism spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, and atomic force microscopy. The unique combination of catalytic activity of nanoscale platinum, biological functionality of DNA, and optoelectronic properties of SWNTs suggests a myriad of applications including fuel cells, catalysts, biosensors, and electrochemical devices.     

Singling out the electrochemistry of individual single-walled carbon nanotubes in solution

Bandgap fluorescence spectroscopy of aqueous, micelle-like suspensions of SWNTs has given access to the electronic energies of individual semiconducting SWNTs, while substantially lower is the success achieved in the determination of the redox properties of SWNTs as individual entities. Here we report an extensive voltammetric and vis-NIR spectroelectrochemical investigation of true solutions of unfunctionalized SWNTs and determine the standard electrochemical potentials of reduction and oxidation as a function of the tube diameter of a large number of semiconducting SWNTs. We also establish the Fermi energy and the exciton binding energy for individual tubes in solution. The linear correlation found between the potentials and the optical transition energies is quantified in two simple equations that allow one to calculate the redox potentials of SWNTs that are insufficiently abundant or absent in the samples.     

Tubular assembly of amphiphilic rigid macrocycle with flexible dendrons

An amphiphilic rigid macrocycle was shown to self-assemble into tubular aggregates that can solubilize SWNTs in aqueous solution through significant pi-pi interactions.     

Diameter-selective solubilization of single-walled carbon nanotubes by reversible cyclic peptides

We have utilized reversible cyclic peptides (RCPs)-peptides containing alternating l- and d-amino acids with N- and C-termini derivatized with thiol-containing groups allowing reversible peptide cyclization-to solubilize and noncovalently functionalize carbon single-walled nanotubes (SWNTs) in aqueous solution. Solubilization occurs through wrapping of RCPs around the circumference of a SWNT, followed by the formation of head-to-tail covalent bonds, yielding closed rings on the nanotubes. By controlling the length of the RCPs, we have demonstrated limited diameter-selective solubilization of the SWNTs as revealed by UV/vis/NIR and Raman spectroscopies, as well as atomic force microscopy.     

Preparation of single-walled carbon nanotube (SWNT) gel composites using poly(ionic liquids)

This paper reports a new and practical route for synthesizing nanotube-polymeric ionic liquids gel by non-covalent functionalization of oxidized single-walled carbon nanotube (SWNT) surfaces with imidazolium-based poly(ionic liquids) (PILs), using in situ radical polymerization method. A black and homogeneous precipitate SWNTs was obtained as a gel form, which is well dispersed in aqueous solution without any aggregation. The formation of SWNT gels is explained by the electrostatic attractions or π-bonds between the SWNT surface and the PIL matrix. By anion-exchange reaction of PIL bound to SWNTs, hydrophilic anions in PIL were substituted with hydrophobic anions, resulting in an effective transfer of SWNT-PIL hydrogels to organogels. The result also showed that SWNTs can effectively improve the conductivity along with the thermal stability of nanocomposite gels.     

Rapidly functionalized, water-dispersed carbon nanotubes at high concentration

Microwave-assisted functionalization of single-wall carbon nanotubes (SWNTs) in a mixture of nitric and sulfuric acids was carried out to synthesize highly water-dispersible nanotubes. Stable concentrations as high as 10 mg/mL were obtained in deionized water that are nearly 2 orders of magnitude higher than those previously reported. This was after only 3 min of functionalization reaction. Fourier transform infrared spectra showed the presence of carboxylated (-COOH) and acid sulfonated (-SO(2).OH or -SO(3)(-) H(+)) groups on the SWNTs. On the basis of elemental analysis, it was estimated that one out of three carbon atoms was carboxylated, while one out of 10 carbon atoms was sulfonated. The Raman spectra taken both in aqueous dispersion and in the solid phase indicated charge transfer from the SWNT backbone to the functional groups. Scanning electron microscope images of thin films deposited from an aqueous suspension showed that the SWNTs were aligned parallel to one another on the substrate. The images also indicated some reduction in average length of the nanotubes. Transmission electron microscope images of thin films from a dilute methanol dispersion showed that the SWNTs were extensively debundled. Laser light scattering particle size measurements did not show evidence for the existence of particles in the 3-800 nm size range, indicating that the functionalized SWNTs might have dispersed to have formed a true solution. Moreover, the microwave-processed SWNTs were found to contain significantly smaller amounts of the original iron catalyst relative to that present in the starting nanotubes. The electrical conductivity of a thermally annealed thin membrane obtained from the microwave-functionalized SWNTs was found to be the same as that of a similar membrane obtained from a suspension of the starting nanotubes.     

Stabilization and functionalization of single-walled carbon nanotubes with polyvinylpyrrolidone copolymers for applications in aqueous media

In spite of their useful electronic and mechanical properties, the utility of single-walled carbon nanotubes (SWNT) is limited by their inherent insolubility in aqueous environments and the difficulty in functionalizing the material while retaining opto-electric properties. In this article, the synthesis of polyvinylpyrrolidone (PVP) copolymers for wrapping SWNTs is described. Studies include the effect of polymer composition and charge on SWNT stability in aqueous solution and the variation of the stability of wrapped SWNTs during high-dilution conditions using dialysis studies. Finally, the PVP-copolymer strategy is used to create polymer wrappers with functional handles for the incorporation of useful chemical functionality. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 337–343     

Application of centrifugation to the large-scale purification of electric arc-produced single-walled carbon nanotubes

We report a further advance in the bulk purification of nitric acid-treated single-walled carbon nanotubes (SWNTs) by use of high-speed centrifugation. We have already shown that low-speed centrifugation is effective in removing amorphous carbon (AC). In these earlier experiments, the AC preferentially suspends in aqueous dispersions on low-speed centrifugation (2000g), leaving the SWNTs in the sediment. In a surprising reversal, we now show that high-speed centrifugation (20000g) of well-dispersed preparations is effective in sedimenting carbon nanoparticles (CNP), while leaving the SWNTs suspended in aqueous media. Taken together, these two techniques allow the bulk scale (10 g) purification of SWNTs by efficiently separating the two main contaminants, in an industrially viable process. We show that the mechanism of these separations is based on the differential charging (zeta-potential) of the AC, CNPs, and SWNTs that comes about during the chemical processing. Due to their more robust structure, nitric acid oxidation leaves the CNPs with a surface charge density lower than that of the SWNTs, and thus the CNPs do not form stable dispersions in aqueous media during high-speed centrifugation. The efficiency of the process was confirmed by the high purification recovery factor (PRF = 90%), which is a measure of the fractional quantity of the product recovered after the purification. We demonstrate that the purity of SWNTs significantly affects their mechanical and electrical properties.     

Real‐Time Nitrophenol Detection Using Single‐Walled Carbon Nanotube Based Devices

Single‐walled carbon nanotube (SWNT) based devices have been developed for the real‐time detection of nitrophenols in aqueous solution. SWNTs are assembled to electrodes using AC dielectrophoresis technique. The SWNT devices exhibit not only high sensitivity to nitrophenol compounds, but also good reusability. Charge transfer between nitro group and SWNTs, and the metal‐nanotube interface modification are hypothesized to be the possible origins of conductance change. These results indicated that the SWNT devices can be utilized as a simple, low cost, sensitive, and reusable platform for real‐time detection of nitrophenol compounds.     

Individual dissolution of single-walled carbon nanotubes in aqueous solutions of steroid or sugar compounds and their Raman and near-IR spectral properties

The individual solubilization of single-walled carbon nanotubes (SWNTs), achieved by using ten different anionic-, zwitterionic-, and nonionic-steroid biosurfactants and three different sugar biosurfactants, was examined. Aqueous micelles of anionic cholate analogues, such as sodium cholate (SC), sodium deoxycholate (SDC), sodium taurocholate (STC), sodium taurodeoxycholate (STDC), sodium glycocholate (SGC), as well as N,N-bis(3-D-gluconamidopropyl)cholamide (BIGCHAP) and N,N-bis(3-D-gluconamidopropyl)deoxycholamide (deoxy-BIGCHAP), exhibited good abilities to dissolve the SWNTs individually. Aqueous micelles of nonionic biosurfactants, such as sucrose monocholate (SMC), n-octyl-beta-D-glucoside (OG), n-decyl-beta-D-maltoside (DM), and n-decanoyl-N-methylglucamide (MEGA-10), could dissolve the SWNTs, however, the solubilization abilities were weaker than those of the anionic cholate analogues. In sharp contrast, the solubilization abilities of the zwitterionic micelles of 3-[(3-cholamidopropyl)dimethylammonio]propanesulfonic acid (CHAPS) and 3-[(3-cholamidopropyl)dimethylammonio]-2-hydroxypropanesulfonic acid (CHAPSO) were very low, and almost zero for OG. It is evident that the chemical structures, in particular the substituent groups of the surfactants, play an important role in the solubilization of SWNTs. The near-IR photoluminescence behaviors of the SWNTs dissolved in aqueous micelles and in 1 mM biosurfactants were investigated. The chirality indices of the SWNTs dissolved in these solutions depend on the chemical structures of the biosurfactants. The Raman spectra of the SWNTs dissolved in a 1 mM solution of SC suggest the selective extraction of the metallic SWNTs. Finally, a possible solubilization mechanism using steroid surfactants is described. The SWNTs dissolved individually in water-containing biocompounds are useful in many areas of nano- and materials chemistry.     

Single-walled carbon nanotubes filled with M OH (M = K, Cs) and then washed and refilled with clusters and molecules

Heating single-walled carbon nanotubes (SWNTs) with molten hydroxides MOH (M = K, Cs) gave MOH@SWNT in good yield; high resolution transmission electron microscopy (HRTEM) indicated that CsOH in CsOH@SWNT often adopts twisted 1D crystal structures inside SWNTs; treating MOH@SWNT with water at room temperature removes the soluble hydroxide filling and the resulting SWNTs may then be filled using aqueous solutions of uranyl acetate or uranyl nitrate at rt giving SWNTs filled with UO(2) clusters and uranyl acetate molecules.