Formation of surface CN from the coupling of C and N atoms on Pt(111)

Reflection absorption infrared spectroscopy (RAIRS) and temperature-programmed desorption have been used to study the coupling of C and N atoms on Pt(111) to form surface CN. This reaction underlies the important synthesis of HCN from methane and ammonia over platinum catalysts. Since CH4 and NH3 do not thermally dissociate on Pt(111) under ultrahigh vacuum conditions, we used CH3I and electron bombardment of NH3 to generate reactive surface species. Surface CN is formed at a temperature of 500 K from surface Nads and Cads atoms. The presence of surface CN is detected by HCN desorption and through the reaction of hydrogen with CNads to form a surface >CNH2 (aminocarbyne) species, which has a characteristic RAIR spectrum.     

Theoretical study of CCl(4) adsorption and hydrogenation on a Pt (111) surface

The adsorption and hydrogenation of carbon tetrachloride (CCl(4)) on a Pt (111) surface have been investigated using density functional theory (DFT). We have performed calculations on the adsorption energies and structures of CCl(4) on four different adsorption sites of a Pt (111) surface using the full adsorbate geometry optimization method. The results show that the adsorption energy of all of the potential sites is less than -17 kcal/mol, which indicates that CCl(4) is physiosorbed on a Pt (111) surface through van der Waals interactions. The dissociation and hydrogenation pathways were investigated by a transition state search. For the Pt(15), Pt(19), and Pt(25) cluster surfaces, the activation energies of dissociation obtained in this work are 15.69, 16.94, and 16.77 kcal/mol, respectively. The hydrogenation of CCl(3). was studied at the on-top site of the Pt(15) cluster, and the calculated activation energy is 5.06 kcal/mol. The small activation energies indicate that the Pt (111) surface has high catalytic activity for the CCl(4) hydrogenation reaction. In addition, the Hirshfeld population analysis reveals that the charge transfer from the Pt (111) surface to the adsorbates occurs in both the dissociation and hydrogenation pathways.     

Identification and hydrogenation of C2 on Pt(111)

Reflection absorption infrared spectroscopy (RAIRS) and temperature-programmed desorption (TPD) were used to identify the molecular species formed upon the reaction of hydrogen with surface carbon that is deposited by exposing acetylene to a Pt(111) surface held at 750 K. At this temperature, the acetylene is completely dehydrogenated and all hydrogen is desorbed from the surface. Upon subsequent hydrogen exposure at 85 K followed by sequential annealing to higher temperatures, ethylidyne (CCH3), ethynyl (CCH), and methylidyne (CH) are formed. The observation of these species indicates that carbon atoms and C2 molecules exist as stable species on the surface over a wide range of temperatures. Through a combination of RAIRS intensities, hydrogen TPD peak areas, and Auger electron spectroscopy, quantitative estimates of the coverages of the various species were obtained. It was found that 79% of the acetylene-derived carbon was in the form of C2 molecules, with the remainder in the form of carbon atoms. Essentially all of the acetylene-derived carbon could be hydrogenated. In contrast, 85% of an equivalent coverage of carbon deposited by ethylene exposure at 750 K was found to be inert toward hydrogenation.     

Transition state for alkyl group hydrogenation on Pt(111)

Substituent effects have been used to probe the characteristics of the transition state to hydrogenation of alkyl groups on the Pt(111) surface. Eight different alkyl and fluoroalkyl groups have been formed on the Pt(111) surface by dissociative adsorption of their respective alkyl and fluoroalkyl iodides. Coadsorption of hydrogen and alkyl groups, followed by heating of the surface, results in hydrogenation of the alkyl groups to form alkanes, which then desorb into the gas phase. Temperature-programmed reaction spectroscopy was used to measure the barriers to hydrogenation, DeltaE(H)(double dagger), which are dependent on the size of the alkyl group (polarizability) and the degree of fluorination (field effect). This example is one of only two surface reactions for which the influence of the substituents on DeltaE(H)(double dagger) has been correlated with both the field and the polarizability substituent constants of the alkyl groups in the form of a linear free energy relationship. Increasing both the field and the polarizability constants of the alkyl groups increases the value of DeltaE(H)(double dagger). The substituent effects are quantified by a field reaction constant of rho(F) = 27 +/- 4 kJ/mol and a polarizability reaction constant of rho(alpha) = 19 +/- 3 kJ/mol. These suggest that the transition state for hydrogenation is slightly cationic with respect to the alkyl group on the Pt(111) surface, RC + H <--> {RC(delta+)...H}(double dagger).     

Ab initio reaction path analysis of benzene hydrogenation to cyclohexane on Pt(111)

First-principles density functional theory calculations were performed to obtain detailed insight into the mechanism of benzene hydrogenation over Pt(111). The results indicate that benzene hydrogenation follows a Horiuti-Polanyi scheme which involves the consecutive addition of hydrogen adatoms. A first-principles-based reaction path analysis indicates the presence of a dominant reaction path. Hydrogenation occurs preferentially in the meta position of a methylene group. Cyclohexadiene and cyclohexene are expected to be at best minor products, since they are not formed along the dominant reaction path. The only product that can desorb is cyclohexane. Along the dominant reaction path, two categories of activation energies are found: lower barriers at approximately 75 kJ/mol for the first three hydrogenation steps, and higher barriers of approximately 88 kJ/mol for steps four and six, where hydrogen can only add in the ortho position of two methylene groups. The highest barrier at 104 kJ/mol is calculated for the fifth hydrogenation step, which may potentially be the rate-determining step. The high barrier for this step is likely the result of a rather strong C-H...Pt interaction in the adsorbed reactant state (1,2,3,5-tetrahydrobenzene) which increases the barrier by approximately 15 kJ/mol. Benzene and hydrogen are thought to be the most-abundant reaction intermediates.     

DFT characterization of adsorbed NH(x) species on Pt(100) and Pt(111) surfaces

Periodic density functional theory (DFT) calculations using plane waves have been performed to systematically investigate the adsorption and relative stability of ammonia and its dehydrogenated species on Pt(111) and Pt(100) surfaces. Different adsorption geometries and positions have been studied, and in each case, the equilibrium configuration has been determined by relaxation of the system. The vibrational spectra of the various ammonia fragments have been computed, and band assignments have been compared in detail with available experimental data. The adsorption of NH3 (on top) and NH2 (bridge) is more favorable on Pt(100) than on Pt(111), while similar adsorption energies were computed for NH (hollow) and N (hollow) on both surfaces. The remarkably lower adsorption energy of NH2 over Pt(111) as compared with Pt(100) (the difference being approximately 0.7 eV) can be related to different geometric and electronic factors associated with this particular intermediate. Accordingly, the type of platinum surface determines the most stable NH(x) fragment: Pt(100) has more affinity for NH2 species, whereas NH species are preferred over Pt(111).     

Molecular dynamics simulations of surface oxide-water interactions on Pt(111) and Pt/PtCo/Pt3Co(111)

Classical molecular dynamics simulations of the interactions of water with oxidized Pt(111) and Pt/PtCo/Pt(3)Co(111) surfaces are performed by modeling water with the CF1 central force model that allows molecular dissociation and therefore the presence of other intermediates of the oxygen reduction reaction different from atomic oxygen. It is found that the water-surface oxide interactions do not affect the overall structure of the catalyst represented by an extended periodic slab. However, such interactions are affected by changes in the electrochemical potential which are simulated by higher values of the surface and atomic oxygen charges at increased oxygen coverage. Thus, electrochemical potential as well as the presence of protons and anions products of acid dissociation define the identity and the amount of oxygen reduction reaction intermediates such as OH or H(3)O. We observe agglomerations of water molecules over regions of the surface and the presence of OH and H(3)O in their vicinity. Our simulation model is able to qualitatively reproduce features of the degradation of the catalyst surface after oxidation and reduction cycles.     

Pt (111)面和Pt14团簇上肉桂醛吸附及选择性加氢机理研究

利用密度泛函理论研究了Pt（111）面及Pt₁₄团簇对肉桂醛（CAL）的吸附作用和不完全加氢的反应机理。分析吸附能结果表明,肉桂醛分子以C=O与C=C键协同吸附在Pt（111）面上的六角密积（Hcp）位最稳定,以C=C键吸附在Pt₁₄团簇上最稳定,且在Pt₁₄团簇上的吸附作用较Pt（111）面更强。由过渡态搜索并计算得到的反应能垒及反应热可知,肉桂醛在Pt（111）面和Pt₁₄团簇上均较容易对C=O键加氢得到肉桂醇（COL）。其中,优先加氢O原子为最佳反应路径,即Pt无论是平板还是团簇对肉桂醛加氢均有较好的选择性。同时发现,肉桂醛分子在Pt（111）面的加氢反应能垒较Pt₁₄团簇上更低,即Pt的催化活性及对肉桂醛加氢产物选择性与其结构密切相关,其中,Pt（111）面对生成肉桂醇更加有利。     

Bulk CO oxidation on platinum electrodes vicinal to the Pt(111) surface

Bulk CO oxidation has been studied on platinum stepped surfaces belonging to the series Pt(S)[n(111) × (111)], using a hanging meniscus rotating disk electrode (HMRDE) configuration. The general shape of the voltammograms is not significantly affected by the presence of the steps. However, the curves shift towards negative values as the step density increases. Thus, in the positive-going scan, a linear relationship is observed for the dependence of the potential for the ignition peak vs the step density for surfaces with terraces wider than five atoms, shorter terraces deviate from this behavior. In the negative-going scan, a similar situation is observed for the potential where the current drops to zero. In this case, Pt(111) electrode also deviates from the expected behavior because of the formation of the ordered bisulfate adlayer on the electrode. The anion readsorption process is also observed by recording the HRMDE voltammograms at a high scan rate. All these results have been analyzed in light of a common mechanism, discussing the possible role of the steps in the stability and reactivity of the CO adlayer. In memoriam of Francisco C. Nart, an excellent scientist, colleague, and friend.     

NO Chemisorption on Pt(111), Rh/Pt(111), and Pd/Pt(111)

The chemisorption of NO on clean Pt(111), Rh/Pt(111) alloy, and Pd/Pt(111) alloy surfaces has been studied by first principles density functional theory (DFT) computations. It was found that the surface compositions of the surface alloys have very different effects on the adsorption of NO on Rh/Pt(111) versus that on Pd/Pt(111). This is due to the different bond strength between the two metals in each alloy system. A complex d-band center weighting model developed by authors in a previous study for SO2 adsorption is demonstrated to be necessary for quantifying NO adsorption on Pd/Pt(111). A strong linear relationship between the weighted positions of the d states of the surfaces and the molecular NO adsorption energies shows the closer the weighted d-band center is shifted to the Fermi energy level, the stronger the adsorption of NO will be. The consequences of this study for the optimized design of three-way automotive catalysts, (TWC) are also discussed.     

Kinetic study of hydrogen sulfide decomposition on Pt(111) surface

In this work, kinetic of H₂S conversion to H₂ molecule on the surface of Pt(111) is studied using kinetic Monte Carlo simulation. The results of simulation were fitted to the experimental temperature-programed desorption spectra. The good agreement between the empirical and the simulated data confirms the proposed mechanism and kinetic data (activated energies and pre-exponential factors). The influence of variables such as temperature and concentrations of H₂S and H₂ on the overall results of hydrogen production is studied. The condition is proposed in which the best yield of reaction at minimum temperature is obtained. Results show that platinum is a perfect catalyst for converting H₂S to H₂ and it has a perfect performance (98%) after 5 μs at low temperature of 227°C.     

Methanol oxidation on a Pt(111)-OH/O surface

The methanol oxidation on a hydroxylated Pt (Pt(111)-OH) surface has been investigated by means of infrared reflection absorption spectroscopy (IRAS) in ultra-high vacuum (UHV) and in acidic solution. The Pt(111)-OH surface in UHV was prepared by introducing water molecules on a Pt(111)-(2 x 2)-O surface and annealed at temperature higher than 160 K. Methanol was then, introduced to the Pt(111)-OH surface to show the dependence of the reaction intermediate on the annealing temperature. At an annealing temperature below 160 K, IR bands assignable to methanol overlayer were observed and no detectable intermediates, such as CO, formaldehyde and formate, were formed, suggesting that methanol molecules remain stable on Pt(111) surface without dissociation at this temperature region. At an annealing temperature above 160 K, on the other hand, CO and formate were observed. In addition, the oxidation of CO on Pt(111)-OH showed no sign of formate formation, indicating that formate is not derived from CO, but from a direct oxidation of methanol. Methanol oxidation was carried out in 0.1 mol dm(-3) HClO(4) solution on Pt(111) with a flow cell configuration and showed the formation of formate. These results indicate that the formate is the dominant non-CO intermediate both in UHV and in acidic solution, and the preadsorbed oxygen-containing species, in particular OH adsorbates, on Pt(111) surface plays a very important role in the formate formation process in methanol oxidation reaction.     

Inelastic scattering and chemisorption of CO on a Pt(111) surface

A semiclassical model is used to calculate energy transfer in collisions between CO and a Pt(111) surface. The sticking probability is found to be as large as 0.7–0.8 for small collision energies (≈0.14 eV). At higher energies (≈5 eV) it decreases to ≈0.3. Strong interaction between the adsorbed molecule and the phonons is observed.     

Surface chemistry of CN bond formation from carbon and nitrogen atoms on Pt(111)

The mechanism of CN bond formation from CH3 and NH3 fragments adsorbed on Pt(111) was investigated with reflection absorption infrared spectroscopy (RAIRS), temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). The surface chemistry of carbon-nitrogen coupling is of fundamental importance to catalytic processes such as the industrial-scale synthesis of HCN from CH4 and NH3 over Pt. Since neither CH4 nor NH3 thermally dissociate on Pt(111) under ultrahigh vacuum (UHV) conditions, the relevant surface intermediates were generated through the thermal decomposition of CH3I and the electron-induced dissociation of NH3. The presence of surface CN is detected with TPD through HCN desorption as well as with RAIRS through the appearance of the vibrational features characteristic of the aminocarbyne (CNH2) species, which is formed upon hydrogenation of surface CN at 300 K. The RAIRS results show that HCN desorption at approximately 500 K is kinetically limited by the formation of the CN bond at this temperature. High coverages of Cads suppress CN formation, but the results are not influenced by the coadsorbed I atoms. Cyanide formation is also observed from the reaction of adsorbed N atoms and carbon produced from the dissociation of ethylene.     

The infrared spectrum of an adsorbate formed from NH3 on polyerystalline Pt (111)

We have studied the infrared reflection-absorption spectrum of an adsorbate formed when an annealed polycrystalline Pt foil, presumably having a (111) surface structure, is exposed to ammonia gas at pressures in the range 0.1–10 torr. Isotopic substitution establishes that the adsorbate contains N₂ in addition to NH_x species. There is also CN present in the adsorbate, presumably formed by reaction of nitrogen with carbon impurities on the surface.     

Preoxidation of CO on Os-modified Pt(111): a comparison with Ru-modified Pt(111)

The variation in CO adsorption structures during the preoxidation of CO on Os-modified Pt(111) (Pt(111)/Os) was investigated using cyclic voltammetry and electrochemical scanning tunneling microscopy. The spontaneous deposition of Os on Pt(111) resulted in randomly scattered islands with a coverage range of 0.13-0.54. During preoxidation on Pt(111)/Os, a phase transition from (2 × 2)-α to (√19 × √19) via the transient structures of (2 × 2)-β and (1 × 1) took place as on unmodified Pt(111). As the amount of Os increased, however, the transient structures of (2 × 2)-β and (1 × 1) appeared at lower potentials with higher populations. When the population of the transient structures was greater than 50%, an oxidative CO stripping process took place to the structure of (√19 × √19), completing the preoxidation. These observations strongly support the idea that the presence of Os increases the mobility of adsorbed CO by electronic modification of the Pt(111) surface (electronic effect). In addition, the results obtained with Pt(111)/Os were compared with those of Pt(111)/Ru.     

Pd/Cu(111)双金属表面催化糠醛脱碳及加氢的反应机理

采用密度泛函理论(DFT)研究糠醛在最稳定Pd/Cu(111)双金属表面上的吸附构型和糠醛脱碳及加氢的反应机理。结果表明,当糠醛初始吸附于O_3-Pd-top、O_7-Cu-hcp位时,吸附构型最稳定,其吸附能为73.4 kJ/mol。糠醛在Pd/Cu(111)双金属表面上更易发生脱碳反应。对于糠醛脱碳反应,所需活化能较低,各个基元反应均为放热反应,糠醛更易先失去支链上的H形成(C_4H_3O)CO,然后中间体脱碳加氢得到呋喃,其中,C_4H_3O加氢生成呋喃所需活化能(72.6 kJ/mol)最高,是反应的控速步骤。对于加氢反应,糠醛与首个氢原子的反应需要最大的活化能(290.4 kJ/mol),是反应的限速步骤。     

Selectivity control for the catalytic 1,3-butadiene hydrogenation on Pt(111) and Pd(111) surfaces: Radical versus closed-shell intermediates

The hydrogenation of 1,3-butadiene to different C4H8 species on both Pd(111) and Pt(111) surfaces has been studied by means of periodic slabs and DFT. We report the adsorption structures for the various mono- and dihydrogenated butadiene intermediates adsorbed on both metal surfaces. Radical species are more clearly stabilized on Pt than on Pd. The different pathways leading to these radicals have been investigated and compared to those producing 1-butene and 2-butene species. On palladium, the formation of butenes seems to be clearly favored, in agreement with the high selectivity to butenes observed experimentally. In contrast, the formation of dihydrogenated radical species seems to be competitive with that of butenes on platinum, which could explain its poorer selectivity to butenes and the formation of butane as a primary product.     

Pt oxide and oxygen reduction at Pt(111) studied by surface X-ray diffraction

The influence of the oxygen reduction reaction on the oxidation of Pt(111) is studied by surface X-ray diffraction. The oxygen reduction reaction does not significantly influence the place-exchange process during the initial stages of oxidation and there is no change in the onset potential and kinetics.