Intramolecular ketenimine-ketenimine [2 + 2] and [4 + 2] cycloadditions

Bis(ketenimines), in which the two heterocumulenic functions are placed in close proximity on a carbon skeleton to allow their mutual interaction, show a rich and not easily predictable chemistry. Intramolecular [2 + 2] or [4 + 2] cycloadditions are, respectively, observed when both ketenimine functions are supported on either ortho-benzylic or 2,2'-biphenylenic scaffolds. In addition, nitrogen-to-carbon [1,3] and [1,5] shifts of arylmethyl groups in N-arylmethyl-C,C-diphenyl ketenimines are also disclosed.     

DFT study on [4+2] and [2+2] cycloadditions to [60] fullerene

The functionalisation of C₆₀ fullerene with 2,3-dimethylene-1,4-dioxane (I) and 2,5-dioxabicyclo [4.2.0]octa-1(8),6-diene (II) was investigated by the use of density functional theory calculations in terms of its energetic, structural, field emission, and electronic properties. The functionalisation of C₆₀ with I was previously reported experimentally. The I and II molecules are preferentially attached to a C—C bond shared and located between two hexagons of C₆₀ via [4+2] and [2+2] cycloadditions bearing reaction energies of ?15.9 kcal mol^?1 and ?72.4 kcal mol^?1, respectively. The HOMO-LUMO energy gap and work function of C₆₀ are significantly reduced following completion of the reactions. The field electron emission current of the C₆₀ surface will increase after functionalisation of either the I or II molecule.     

Ruthenium-catalyzed [2 + 2] cycloadditions of ynamides

Ruthenium-catalyzed [2 + 2] cycloadditions between norbornene and ynamides were investigated. The ynamide moiety was found to be compatible with the ruthenium-catalyzed cycloaddition conditions, giving the corresponding cyclobutene cycloadducts in moderate to good yields (up to 97%). [reaction: see text]     

Rhodium catalysed [2+2+2] cycloadditions of acetylenes

Wilkinson's catalyst RhCl(PPh₃)₃ is an effective catalyst (0.5 – 2 mole %) for the rapid intermolecular trimerisation of 1,6-heptadiynes with monoacetylenes under mild conditions.     

Frontier-orbital analyses of ketene [2+2] cycloadditions

Twelve kinds of ketene [2+2] cycloadditions have been investigated by ab initio calculations. They are composed of four ketenes (Y–HC=C=O, Y=H, NH₂, Cl, and CN) and three isoelectronic ketenophiles (ethylene, methylenimine, and formaldehyde). All the transition state geometries obtained here are not different significantly, but the extent of formation of two covalent bonds differs appreciably. The difference is attributable to the degree of the charge transfer interactions. One is the interaction from the π orbital and/or the lone pair orbital of a ketenophile to the LUMO of a ketene (dominant charge transfer, CT1). The other is that from the HOMO of the ketene to the π* orbital of the ketenophile (second dominant charge transfer, ct1). CT1 contributes to the formation of only one covalent bond, and ct1 does to the formation of the other. This independent function is characteristic of ketene [2+2] cycloadditions. They are not concerned with the orbital phase. We also have examined Fukui's postulate that the deformation of particular frontier orbitals causes the reaction progress. The role has been verified both by configuration analyses along the intrinsic reaction coordinate of the ketene-ethylene reaction and by the examination of distortions of frontier-orbital shapes along the low-frequency vibrational modes. Received: 25 June 1998 / Accepted: 28 August 1998 / Published online: 11 November 1998     

Mechanically facilitated retro [4+2] cycloadditions

Poly(methyl acrylate)s (PMAs) of varying molecular weights were grown from a [4+2] cycloaddition adduct of maleimide with furan containing two polymerization initiators. Subjecting the corresponding PMA (>30 kDa) chains to ultrasound at 0 °C resulted in a retro [4+2] cycloaddition reaction, as observed by gel permeation chromatography (GPC) and UV-vis spectroscopy, as well as labeling of the liberated maleimide and furan moieties with appropriate chromophores featuring complementary functional groups. Similar results were obtained by sonicating analogous polymers that were grown from a thermally robust [4+2] cycloaddition adduct of maleimide with anthracene. The generation of anthracenyl species from these latter adducts allowed for the rate of the corresponding mechanically activated retro [4+2] cycloaddition reaction to be measured. No reduction in the number average molecular weight (M(n)) or liberation of the maleimide, furan, or anthracene moieties was observed (i) for polymers containing the cycloaddition adducts with M(n) < 20 kDa, (ii) for high molecular weight PMAs (M(n) > 60 kDa) featuring terminal cycloaddition adducts, or (iii) when the cycloaddition adducts were not covalently linked to a high molecular weight PMA. Collectively, these results support the notion that the aforementioned retro [4+2] cycloaddition processes were derived from a vectorially opposed mechanical force applied to adducts embedded within the polymer chains.     

Silver-catalyzed [2 + 2] cycloadditions of siloxy alkynes

We have described the first [2 + 2] cycloadditions of siloxy alkynes with a range of unsaturated carbonyl compounds. The reactions are efficiently promoted by substoichiometric amount of silver trifluoromethanesulfonimide and display excellent regio- and diastereoselectivity combined with a broad substrate scope. Our studies have established unambiguously the stepwise mechanism of this process and provided evidence for a novel role of silver in the catalytic cycle of the reaction, which involves silver-based complexation and activation of siloxy alkyne toward the subsequent 1,4-addition.     

NHC-catalyzed enantioselective [2 + 2] and [2 + 2 + 2] cycloadditions of ketenes with isothiocyanates

The enantioselective N-heterocyclic carbene-catalyzed formal [2 + 2] and [2 + 2 + 2] cycloaddition of ketenes and isothiocyanates were developed. Reaction with N-aryl isothiocyanates at room temperature favors the [2 + 2] cycloaddition, while reaction with N-benzoyl isothiocyanates at -40 °C favors the [2 + 2 + 2] cycloaddition.     

Endoperoxide synthesis by photocatalytic aerobic [2 + 2 + 2] cycloadditions

Structurally novel endoperoxides can be sythesized by the photocatalytic cyclotrimerization of bis(styrene) substrates with molecular oxygen. The optimal catalyst for this process is Ru(bpz)(3)(2+), which is a markedly more efficient catalyst for these photooxygention reactions than conventional organic photosensitizers. The 1,2-dioxolane products are amenable to synthetic manipulation and can be easily processed to 1,4-diols and γ-hydroxyketones. An initial screen of the biological activity of these compounds reveals promising inhibition of cancer cell growth.     

Intramolecular [2 + 2]cycloadditions of dialkylketenes with alkenes. Regiochemistry of intramolecular [2+2]cycloadditions of ketenes with alkenes

Unsaturated dialkylketenes 7a, 7b and 7c undergo intramolecular [2 + 2]cycloadditions to give 8a (45%), 9b (23%) and 9c (45%). Intramolecular cycloadditions of dialkylketenes give higher yields than intramolecular cycloadditions of monoalkylketenes, even though dialkylketenes are less reactive than monoalkylketenes. An intramolecular competition experiment with ketene 17 establishes that trans-alkenes are approximately 33 times more reactive than cis-alkenes in intramolecular cycloadditions. Ketene 36 furnishes 22% of the expected bicyclo[3.2.0]heptanone 37 and 28% of bicyclo[3.1.1]heptanone 38.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.     

Ruthenium-catalyzed [2 + 2] cycloadditions of 2-substituted norbornenes

The studies of remote substituent effects in controlling regio- and stereoselectivities in chemical reactions provide important information in understanding long-range stereoelectronic effects. The effect of remote substituents on ruthenium-catalyzed [2 + 2] cycloadditions of 2-substituted norbornenes has been investigated. The cycloadditions occurred at room temperature in excellent yields, and regioselectivities of 1.2:1 to 7.5:1 were observed with various 2-substituted norbornenes.     

Catalytic intermolecular enal-alkyne [3 + 2] reductive cycloadditions

A catalytic, intermolecular [3 + 2] reductive cycloaddition of enals and alkynes has been developed. The method provides a nickel-catalyzed strategy for combining two simple acyclic pi-systems into a five-membered ring product by effecting a net two-electron reduction of the starting materials mediated by triethylborane as the reducing agent. The use of a protic solvent is a key feature of the process.     

3+2] versus [4+2] cycloadditions of quinone monoimide with azadienes: a Lewis acid-free access to 5-amino-2,3-dihydrobenzofuranes

The reaction between p-quinone monoimide 1a and various azadienes 2 is described in the absence of a Lewis acid promoter. When alpha,beta-unsaturated hydrazones are substituted by proton or alkyl groups, 2,3-dihydrobenzofuranes 4, a motif that is present in numerous biologically active products, are obtained in moderate to excellent yields. The regio- and stereoselectivity of this reaction has been proved by a complete NMR study, including 1H-15N correlations.     

Microwave-assisted [3 + 2] cycloadditions of azomethine ylides

The microwave-assisted intramolecular [3 + 2] cycloaddition reaction of azomethine ylides to activated and nonactivated alkenes and alkynes is described. The procedure allows the synthesis of pyrrolidines and pyrrole products in good to excellent overall yields in short reaction times. It appears from parallel comparative studies that the microwave procedure favors the reaction times and overall purity of the crude reaction mixture. The reactions can also be performed in the absence of solvent. [reaction: see text]