Morphology and composition tailoring of Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript>3 − <Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> nanoparticles

Nano-octahedra of cobalt ferrite Co _x Fe_3???xO₄ (1?≤?x?<?2), with a broad size distribution around 15–20 nm, were synthesized by a hydrothermal method using nitrates as precursors. For the first time, single-phased nano-octahedra of cobalt-rich ferrite Co _x Fe_3???xO₄ (x?=?1.5) were synthesized. The nano-octahedra are crystallized in a normal spinel structure, with tetrahedral sites occupied by Co²⁺. This specific octahedral shape was obtained with anionic, cationic, and nonionic surfactants. The nature of the surfactant influenced the chemical composition of the powder and the size of the nano-octahedra. The {100} truncation of the octahedra is more pronounced for the small particles. For the first time, single-phased nanoparticles with as much as x?=?1.8 cobalt were synthesized with ethylene glycol as solvent. These nanoparticles, around 8 nm in size, have no specific shape and possess a lacunar spinel structure similar to maghemite. The samples were characterized by X-ray diffraction, transmission electron microscopy, and energy-dispersive spectroscopy.

Open image in new window

Graphical abstract ?

     

Magnetic M<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>@N-C as heterogeneous catalysts for the catalytic oxidation of aniline solution with sulfate radicals

Metal nanoparticles have been combined with magnet metal–organic frameworks (MOFs) to afford new materials that demonstrate an efficient catalytic degradation, high stability, and excellent reusability in areas of catalysis because of their exceptionally high surface areas and structural diversity. Magnetic M _x O _y @N-C (M = Fe, Co, Mn) nanocrystals were formed on nitrogen-doped carbon surface by using 8-hydroxyquinoline as a C/N precursor. The Co@N-C, MnO@N-C, and Fe/Fe₂O₃@N-C catalysts were characterized by X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), N₂ adsorption/desorption, and X-ray photoelectron spectroscopy (XPS). The catalytic performances of catalysts were thoroughly investigated in the oxidation of aniline solution based on sulfate radicals (SO₄ ^?.) toward Fenton-like reaction. Magnetic M _x O _y @N-C exhibits an unexpectedly high catalytic activity in the degradation of aniline in water. A high magnetic M _x O _y @N-C catalytic activity was observed after the evaluation by aniline degradation in water. Aniline degradation was found to follow the first-order kinetics, and as a result, various metals significantly affected the structures and performances of the catalysts, and their catalytic activity followed the order of Co > Mn > Fe. The nanoparticles displayed good magnetic separation under the magnetic field.

Open image in new window

Graphical Abstract ?

     

Catalytic investigation of PtPd and titanium oxide-loaded reduced graphene oxide for enhanced formic acid electrooxidation

Preparation, characterization, and electrocatalytic study of the electrodeposited Pt and Pd (e.g., Pt and PtPd) catalysts on titanium dioxide (TiO₂) modified reduced graphene oxide (rGO) support for formic acid oxidation were performed. The catalyst composites are labeled as xPt/rGO-TiO₂, xPtyPd/rGO-TiO₂, and yPd/rGO-TiO₂ where x and y are cycle numbers of metal electrodeposition (x and y?=?2–6). The characterizations of the catalysts were performed by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Small and dispersed metal nanoparticles are obtained on rGO-TiO₂. The catalytic performances for formic acid oxidation were measured by cyclic voltammetry (CV) and chronoamperometry (CA). The electrocatalytic results reveal that the bimetallic 4Pt2Pd/rGO-TiO₂ catalyst facilitates formic acid oxidations at the lowest potentials and generates the highest oxidation currents and also improves the highest CO oxidation compared to the monometallic 6Pt/rGO-TiO₂ catalyst. According to the experimental data, the Pd and TiO₂ enhance the electrocatalytic activity of the catalysts towards the formic acid oxidation; the improved catalytic performance of the prepared catalysts strongly relates to the high electrochemically active surface area (ECSA) investigated.

Open image in new window

Graphical abstract TEM image of xPtyPd/rGO-TiO₂ and its CV towards oxidation

     

Electrospinning preparation of one-dimensional Ce<Superscript>3+</Superscript>-doped Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> sub-microbelts for high-performance lithium-ion batteries

One-dimensional Ce³⁺-doped Li₄Ti₅O₁₂ (Li₄Ti_5?x Ce _x O₁₂, x?=?0, 0.01, 0.02, and 0.05) sub-microbelts with the width of approximately 500 nm and thickness of about 200 nm have been synthesized via the facile electrospinning method. The structure and morphology of the as-prepared samples are characterized by XRD, TEM, SEM, BET, HRTEM, XPS, and AFM. Importantly, one-dimensional Li₄Ti₅O₁₂ sub-microbelts can be well preserved with the introduction of Ce³⁺ ions, while CeO₂ impurity is obtained when x is greater than or equal to 0.02. The comparative experiments prove that Ce³⁺-doped Li₄Ti₅O₁₂ electrodes exhibit the brilliant electrochemical performance than undoped counterpart. Particularly, the reversible capacity of Li₄Ti_4.98Ce_0.02O₁₂ electrode reaches up to 139.9 mAh g^?1 and still maintains at 132.6 mAh g^?1 even after 100 cycles under the current rate of 4 C. The superior lithium storage properties of Li₄Ti_4.98Ce_0.02O₁₂ electrode could be attributed to their intrinsic structure advantage as well as enhanced overall conductivity.

Open image in new window

Graphical abstract ?

     

X-ray reflectivity and photoelectron spectroscopy of superlattices with silicon nanocrystals

The structural properties and features of the chemical composition of SiO _x N _y /SiO₂, SiO _x N _y /Si₃N₄, and SiN _x /Si₃N₄ multilayer thin films with ultrathin (1–1.5 nm) barrier SiO₂ or Si₃N₄ layers are studied. The films have been prepared by plasma chemical vapor deposition and have been annealed at a temperature of 1150°С for the formation of silicon nanocrystals in the SiO _x N _y or SiN _x silicon-rich layers with a nominal thickness of 5 nm. The period of superlattices in the studied samples has been estimated by X-ray reflectivity. The phase composition of superlattices has been studied by X-ray electron spectroscopy using the decomposition of photoelectron spectra of the Si 2p, N 1s, and O 1s levels into components corresponding to different charge states of atoms.     

Low toxic and highly luminescent CdSe/Cd<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Zn<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>S quantum dots with thin organic SiO<Subscript>2</Subscript> coating for application in cell imaging

A silanization process was employed to transfer hydrophobic quantum dots (QDs) prepared via an organic route at high temperature into water phase. The QDs were further coated with a thin organic SiO₂ shell to form QDs@SiO₂ composite nanoparticles by ligand exchange or remaining initial organic ligands on the surface. In this study, QDs with different ligands, either trioctylphosphine oxide (TOPO) or oleic acid (OA), were employed to investigate the effects of ligands on the reverse micelles in preparing QDs@SiO₂ nanoparticles. In the preparing process, hydrophobic QDs were silanized by partially hydrolyzed tetraethyl orthosilicate (TEOS). For TOPO-capped CdSe QDs, surface TOPO ligands were completely replaced by partially hydrolyzed TEOS. As for OA-capped CdSe/Cd _x Zn_1?x S QDs, surface OA ligands were partially replaced. It was found that the ligand exchange drastically reduced the photoluminescence (PL) efficiency of CdSe QDs. Furthermore, the cytotoxicity studies of QDs@SiO₂ have been carried out in detail. The results indicate that CdSe/Cd _x Zn_1?x S QDs@SiO₂ composite nanoparticles exhibit lower cytotoxicity compared with CdSe QDs@SiO₂, because the SiO₂ shell and remained OA ligand layer can effectively prevent the leakage of toxic Cd²⁺ ions. Meanwhile, it was found that these CdSe/Cd _x Zn_1?x S QDs@SiO₂ nanocomposites could keep excellent PL properties even for 24 h incubating with Siha cells, which indicating that our prepared composite nanoparticles are potentially applicable for cell imaging in biological systems.     

Investigation of the electronic properties of Au nanoclusters in SiO<Subscript>2</Subscript> by combined scanning tunneling/atomic force microscopy

The tunneling of electrons through Au nanoc lusters formed by pulsed laser deposition in a SiO₂ thin film on a Si substrate has been investigated by combined scanning/atomic force microscopy (STM/AFM). Conducting Pt-coated Si cantilevers were used. The feedback was maintained via the AFM channel, and the current-voltage (I-V) characteristics of the tunnel contact between the AFM probe and the n ⁺-Si substrate through a =4-nm-thick SiO₂ film with Au nanoclusters =2 nm in diameter were measured simultaneously. The current image of the structure contained areas of increased current (tunnel-current channels) 2–15 nm in size, related to tunneling of electrons through Au nanoclusters in SiO₂. The I-V characteristics recorded in the tunnel-current channels exhibit specific features related to the Coulomb blockade of electron tunneling through Au nanoclusters.     

Agglomeration behavior of lipid-capped gold nanoparticles

The current investigation deciphers aggregation pattern of gold nanoparticles (AuNPs) and lipid-treated AuNPs when subjected to aqueous sodium chloride solution with increasing ionic strengths (100–400 nM). AuNPs were synthesized using 0.29 mM chloroauric acid and by varying the concentrations of trisodium citrate (AuNP1 1.55 mM, AuNP2 3.1 mM) and silver nitrate (AuNP3 5.3 μM, AuNP4 10.6 μM) with characteristic LSPR peaks in the range of 525–533 nm. TEM analysis revealed AuNPs to be predominantly faceted nanocrystals with the average size of AuNP1 to be 35?±?5 nm, AuNP2 15?±?5 nm, AuNP3 30?±?5 nm, and AuNP4 30?±?5 nm and the zeta-average for AuNPs were calculated to be 31.23, 63.80, 26.08, and 28 nm respectively. Induced aggregation was observed within 10 s in all synthesized AuNPs while lipid-treated AuNP2 (AuNP2-L) was found to withstand ionic interferences at all concentration levels. However, lipid-treated AuNPs synthesized using silver nitrate and 1.55 mM trisodium citrate (AuNP3, AuNP4) showed much lower stability. The zeta potential values of lipid-treated AuNPs (AuNP1-L-1x/200, ??17.93?±?1.02 mV; AuNP2-L-1x/200, ??21.63?±?0.70; AuNP3-L-1x/200, ??14.54?±?0.90; AuNP3-L-1x/200 ??13.77?±?0.83) justified these observations. To summarize, AuNP1 and AuNP2 treated with lipid mixture 1 equals or above 1x/200 or 1x/1000 respectively showed strong resistance against ionic interferences (up to 400 mM NaCl). Use of lipid mixture 1 for obtaining highly stable AuNPs also provided functional arms of various lengths which can be used for covalent coupling.

Open image in new window

Graphical abstract Agglomeration behavior of gold nanoparticles before and after lipid capping

     

Photoluminescence of Ca(Al<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Ga<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript>)<Subscript>2</Subscript>S<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript> compounds

Photoluminescence (PL) observed in solid solutions of Ca(Al _x Ga_1–x )₂S₄:Eu²⁺ (x = 0.1–0.3) is studied. It is shown that the increase in emission intensity by 18% is caused by changes in the x values and electronic 5d → 4 f transitions in Eu²⁺ ions. A change in the position of the emission spectrum or its partial shift toward shorter wavelengths is due to an increase in the aluminum concentration and a decrease in the crystal field energy. The energy of the zero phonon line E ₀, redshift D, and the Stokes shift ΔS are determined. A decrease in the photoluminescence intensity maximum and an increase in the half-width of the spectrum are found in the temperature range of 10–300 K. The efficiency of emission at temperatures of 20 and 300 K is almost independent of the excitation power density of up to ~10⁴ W/cm². The luminescence lifetime of Eu²⁺ ions was 383, 357, 346, and 333 ns for x = 0, 0.1, 0.2, and 0.3, respectively.     

Josephson effects in unconventional heavy fermion superconductors

We discuss the Josephson effect for pairing states which break crystal symmetries in addition to gauge symmetry. We consider theE _1g andE _2u models for the low-temperature phase ofUPt ₃, with order parameters Δ(E _1g )～p _z (p _x +ip _y ) and Δ(E _2u )～p _z (p _x +ip _y )². We report calculations of Josephson critical currents, taking into account the effects of depairing at the interface. For singlet-triplet junctions the critical current is non-zero only for spin-orbit, spin-flip tunneling, and is found to be much smaller than the Ambegaokar-Baratoff value even when the spin-orbit tunneling amplitude is comparable to the spin-independent amplitude.     

Intercluster conduction in lightly doped La<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ca<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MnO<Subscript>3</Subscript> manganites in the paramagnetic temperature range

The magnetotransport and magnetic properties of La _{1 ? x} Ca _x MnO₃ polycrystalline samples (x = 0–0.3) annealed under vacuum and in the oxygen environment are investigated in the temperature range from 77 to 400 K. The magnetic studies of lightly doped manganites reveal persistence of short-range magnetic order up to a temperature T* ≈ 300 K, which is about 2–3 times higher than their Curie temperature T _C. The temperature dependence of the electrical resistivity measured from T* down to nearly T ≈ T _C is fitted by the relation logρ ～ T ^?1/2, which is characteristic of granular metals with electrons tunneling among nanoclusters of magnetic metals embedded in a dielectric host. The magnetoresistance of polycrystalline samples annealed in the oxygen environment has been observed to increase. The electrical, magnetic, and magnetotransport properties of the manganites can be accounted for by the formation of magnetic nanoclusters below T*, tunneling (or hopping) of carriers among the nanoclusters, variation in the magnetic cluster size, and tunneling barrier thickness with variations in temperature and magnetic field strength, as well as by the effect of annealing in different media on the cluster properties.     

Mechanism of charge transfer in <Emphasis Type="Italic">n</Emphasis>-CdS/<Emphasis Type="Italic">p</Emphasis>-CdTe heterojunctions

The capacitance-voltage and current-voltage characteristics of the n-CdS/p-CdTe heterosystem are investigated. Analysis of these characteristics demonstrates that the CdTe_1?x S _x solid solution formed at the n-CdS/p-CdTe heterointerface is inhomogeneous in both the conductivity and composition. The thickness of solid solutions is estimated from the capacitance-voltage characteristics. It is shown that, for the n-CdS/p-CdTe heterosystem, the current-voltage characteristic in the current density range 10^?8-10^?5 A cm^?2 is governed by the thermal electron emission, whereas the current in the heterostructure at current densities in the range 10^?4-10^?2 A cm^?2 is limited by recombination of charge carriers in the electroneutral region of the CdTe_1?x S _x solid solution. The lifetime and the diffusion length of minority charge carriers in the CdTe_1?x S _x solid solution and the surface recombination rate at the interface between the CdS layer and the CdTe_1?x S _x solid solution are determined. It is demonstrated that the n-CdS/p-CdTe heterostructure operates as a p-i-n structure in which CdTe is a p layer, CdTe_1?x S _x is an i layer, and CdS is an n layer.     

Analysis of the gain and luminescence properties of Si/Si<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>G<Subscript>x</Subscript>: Er/Si heterostructures produced by sublimation molecular-beam epitaxy in a gas phase

Si/Si_1?xGe_x: Er/Si structures grown by sublimation molecular-beam epitaxy (SMBE) in a gas phase are studied. These structures are considered possible structures for realizing a Si/Er-based laser. It is shown that SMBE in a gas phase can be applied to create effective light-emitting structures that generate an intense luminescence signal at a wavelength of 1.54 μm. The structures and chemical compositions of the Si/Si_1?xG_x: Er/Si structures, whose parameters are close to those calculated for creating laser-type structures, are examined, and their photoluminescence (PL) spectra and kinetics are studied at 4.2 and 77 K. It is shown that the fraction of Er³⁺ optically active centers in the Si_1?xG_x: Er layers thus grown reaches ～10% of the total erbium-impurity concentration. The optical gains in the active Si_1?xG_x: Er layers at x = 0.1 and 0.02 are estimated to be ～0.03 and ～0.2 cm^?1, respectively. The gain in structures of this type can be significantly increased via the intentional formation of isolated Er³⁺ optically active centers whose PL spectra have a characteristic fine structure.     

Anomalous temperature dependence of photoluminescence in GeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> films and GeO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/SiO<Subscript>2</Subscript> nano-heterostructures

The optical properties of GeO _x film and GeO _x /SiO₂ multilayer heterostructures (with thickness of GeO _x layers down to 1 nm) were studied with the use of Raman scattering and infrared spectroscopy, ellipsometry and photoluminescence spectroscopy including temperature dependence of photoluminescence. The observed photoluminescence is related to defect (dangling bonds) in GeO _x and interface defects for the case of GeO _x /SiO₂ multilayer heterostructures. From analysis of temperature dependence of photoluminescence intensity, it was found that rate of nonradiative transitions in GeO _x film has Berthelot type, but anomalous deviations from Berthelot type temperature dependence were observed in temperature dependences of photoluminescence intensities for GeO _x /SiO₂ multilayer heterostructures.     

Enhanced catalytic hydrogenation activity of Ni/reduced graphene oxide nanocomposite prepared by a solid-state method

A simple solid-state method has been applied to synthesize Ni/reduced graphene oxide (Ni/rGO) nanocomposite under ambient condition. Ni nanoparticles with size of 10–30 nm supported on reduced graphene oxide (rGO) nanosheets are obtained through one-pot solid-state co-reduction among nickel chloride, graphene oxide, and sodium borohydride. The Ni/rGO nanohybrid shows enhanced catalytic activity toward the reduction of p-nitrophenol (PNP) into p-aminophenol compared with Ni nanoparticles. The results of kinetic research display that the pseudo-first-order rate constant for hydrogenation reaction of PNP with Ni/rGO nanocomposite is 7.66 × 10^?3 s^?1, which is higher than that of Ni nanoparticles (4.48 × 10^?3 s^?1). It also presents superior turnover frequency (TOF, 5.36 h^?1) and lower activation energy (E_a, 29.65 kJ mol^?1) in the hydrogenation of PNP with Ni/rGO nanocomposite. Furthermore, composite catalyst can be magnetically separated and reused for five cycles. The large surface area and high electron transfer property of rGO support are beneficial for good catalytic performance of Ni/rGO nanocomposite. Our study demonstrates a simple approach to fabricate metal-rGO heterogeneous nanostructures with advanced functions.

Open image in new window

Graphical abstract ?

     

Surface structural,morphological, and catalytic studies of homogeneously dispersed anisotropic Ag nanostructures within mesoporous silica

Highly dispersed anisotropic Ag nanostructures were synthesized within the channels of 3-aminopropyltrimethoxysilane (APTMS)-modified mesoporous SBA-15 for catalyzing the reduction of p-dinitrobenzene, p-nitrophenol, and p-nitroacetophenone, respectively. A green templating process without involving any reducing agent, by varying the amount (1–10 wt.%) of Ag loading followed by calcination at 350 °C under H₂ led to change in the morphology of Ag nanoparticles from nanospheres (~7–8 nm) to nanorods (aspect ratio ~12–30 nm) without any deformation in mesoporous sieves. In comparison to white bare SBA-15, gray-colored samples were formed with Ag impregnation exhibiting absorption bands at 484 and 840 nm indicating the formation of anisotropic Ag nanostructures within mesoporous matrix. TEM and FE-SEM micrographs confirmed the presence of evenly dispersed Ag nanostructures within as well as on the surface of mesoporous matrix. AFM studies indicated a small decrease in the average roughness of SBA-15 from 20.59 to 19.21 nm for 4 wt.% Ag/m-SBA-15, illustrating the encapsulation of majority of Ag nanoparticles in the siliceous matrix and presence of small amount of Ag nanoparticles on the mesoporous support. Moreover, due to plugging of mesopores with Ag, a significant decrease in surface area from 680 m²/g of SBA-15 to 385 m²/g was observed. The Ag-impregnated SBA-15 catalyst displayed superior catalytic activity than did bare SBA-15 with 4 wt.% Ag-loaded catalyst exhibiting optimum activity for selective reduction of p-nitrophenol to p-aminophenol (100 %), p-nitroacetophenone to p-aminoacetophenone (100 %), and p-dinitrobenzene to p-nitroaniline (87 %), with a small amount of p-phenylenediamine formation.

Open image in new window

Graphical abstract This paper demonstrates the spontaneous formation of uniformly dispersed Ag nanospecies of various morphologies (nanospheres, size ~7–8 nm and nanorods, aspect ratio ~12–30 nm), both within as well as on the surface of the mesoporous SBA-15, as a function of increased Ag loading. Surface structural and other physiochemical properties of Ag/m-SBA-15 nanocomposites were considerably influenced w.r.t change in Ag loading. Ag/m-SBA-15 nanocomposites with 4 wt.% Ag loading exhibited the highest selectivity (87 %) for the selective reduction of p-dinitrobenzene to p-nitroaniline and 100 % selectivity for p-nitrophenol to p-aminophenol and p-nitroacetophenone to p-aminoacetophenone, respectively.

     

Preparation and characterization of Sm<Superscript>3+</Superscript>-doped SrSnO<Subscript>3</Subscript> and its photoelectric performance as photo-anode of dye-sensitized solar cells

Sm³⁺-doped SrSnO₃ (SrSnO₃:Sm³⁺) nanopowders were synthesized by a simple hydrothermal method and followed by a heat treatment process. The as-synthesized nanopowders were assembled in dye-sensitized solar cells (DSSCs) to investigate their photoelectric properties. X-ray diffraction (XRD), scanning electron microscope (SEM), and energy-dispersive spectrometer (EDS) confirmed the formation of SrSnO₃:Sm³⁺ nanopowders with perovskite structure. The ultraviolet-visible absorption spectra and photoluminescence spectra indicate a down-conversion from ultraviolet light to visible light which matches the strong absorption region of the N719 dye. The DSSC based on SrSnO₃:Sm³⁺ photo-anode improved its photoelectric conversion efficiency (η) via the down-conversion of doped Sm³⁺. Under the irradiation of the simulated sunlight with 100 mW/cm², the DSSC based on SrSnO₃ doping with Sm³⁺ of 0.6 wt% showed the highest η of 1.54%, which improved 71.11% compared with the DSSC based on pure SrSnO₃.

Open image in new window

Graphical abstract Excitation and emission spectrums of SrSnO₃ with different Sm³⁺ doping amounts.

     

Solutions of the Schrödinger equation for Dirac delta decorated linear potential

We have studied bound states of the Schrödinger equation for a linear potential together with any finite number (P) of Dirac delta functions. Forx<-0, the potential is given as

Open image in new window

where 0<f; 0<x ₁<x ₂<...<x _P , theσ _i are arbitrary real numbers, and the potential is infinite forx<0.

     

On a Semiclassical Formula for Non-Diagonal Matrix Elements

Let H(?)=?? ²d²/dx ²+V(x) be a Schrödinger operator on the real line, W(x) be a bounded observable depending only on the coordinate and k be a fixed integer. Suppose that an energy level E intersects the potential V(x) in exactly two turning points and lies below V _∞=lim?inf?_|x|→∞ V(x). We consider the semiclassical limit n→∞, ?=? _n →0 and E _n =E where E _n is the nth eigenenergy of H(?). An asymptotic formula for 〈n|W(x)|n+k〉, the non-diagonal matrix elements of W(x) in the eigenbasis of H(?), has been known in the theoretical physics for a long time. Here it is proved in a mathematically rigorous manner.     

Influence of oxidized interlayers on magnetic properties of multilayer films based on amorphous ferromagnet–dielectric nanocomposites

Films of composites (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x, (Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x, (Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x and multilayer heterogeneous composite–composite structures {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + N₂]}_n, {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + O₂]}_n, {[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x]/[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x + O₂]}_n, and {[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x]/[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x + O₂]}_n have been deposited using the ionbeam sputtering method with a cyclic supply of reaction gases during deposition. The structure and magnetic properties of the films have been studied. It has been shown that the introduction of an oxidized interlayer makes it possible to suppress the perpendicular magnetic anisotropy in the (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x composite with the metallic phase concentration higher than the percolation threshold.