Synthesis of boron-containing derivatives of pyropheophorbide <Emphasis Type="ItalicUnderline">a</Emphasis> and investigation of their photophysical and biological properties

Proceeding from pyropheophorbide a and 9-hydroxymethyl-m-carborane, 1-hydroxymethyl-o-carborane, and 3-amino-o-carborane new carboranylchlorins were prepared, and their photophysical and biological properties were investigated.     

Comparison of luminescent properties of helicene-like bibenzothiophenes with <Emphasis Type="Italic">o</Emphasis>-carborane and 5,6-dicarba-<Emphasis Type="Italic">nido</Emphasis>-decaborane

This article describes comparison of the anchoring effect on electronic properties of the helicene-like bibenzothiophene between o-carborane and 5,6-dicarba-nido-decaborane. The o-carborane and nido-decaborane-fused bibenzothiophenes were simultaneously obtained in the same reaction and successfully isolated. Initially, the X-ray single crystal analysis revealed that the helicene-like distorted structure was realized in the nido-decaborane-fused bibenzothiophene. From optical measurements in the solution state, distinct different characteristics depending on the type of anchors were observed. It was summarized that the absorption and luminescent properties originated from weak π-conjugation at the bibenzothiophene moiety in the o-carborane-fused compound were obtained, whereas robust π-conjugation and significant emission from the intramolecular charge transfer state were detected from the nido-decaborane-fused compound. These data can be explained by the theoretical results that π-conjugation was restrictedly developed within the bibenzothiophene moiety in frontier orbitals of the o-carborane-fused compound. In contrast, π-conjugation can be constructed even through the distorted bibenzothiophene because of the nido-decaborane unit. Moreover, the intramolecular charge transfer state should be realized because of electronic interaction involving the nido-decaborane unit in the excited state. Furthermore, it was demonstrated that the nido-decaborane-fused compound possessed solid-state emission and mechanochromic luminescent properties. The π-conjugation on the distorted structure supported by the nido-decaborane anchor should play a significant role in suppressing aggregation-caused quenching followed by presenting solid-state emission with stimuli responsiveness.     

Synthesis of 6,8-substituted 4-(hydroxyphenylamino)- and 4-(aminophenylamino)-2-methylquinolines

A procedure has been developed for the synthesis of 4-(hydroxyphenylamino)- and 4-(aminophenylamino)-2-methylquinolines having a substituent in the 6(8)-position of the quinoline ring from the corresponding 4-chloro-2-methylquinolines and o-, m-, and p-aminophenols and o-, m-, and p-phenylenediamines.     

Synthesis and structure of bis(1,2-diaminoethane) copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-hydroxybenzoate) monohydrate and <Emphasis Type="Italic">trans</Emphasis>-diaquabis(1,2-diaminoethane)copper(II) bis(<Emphasis Type="Italic">o</Emphasis>-aminobenzoate)

X-ray structural analysis has been performed for two complex compounds: Cu(en)₂(o-HB)₂H₂O (I) (a = 16.873(4) Å, b = 8.713(2) Å, c = 14.803(3) Å, β = 91.15(2)°, V = 2175.8(8) ų, C2/c, Z = 4, R(F) = 0.0263, 1516 reflections with I > 3σ (I)) and [Cu(en)₂(OH₂)₂]²⁺(o-AB^?)₂ (II) (a = 7.488(5) Å, b = 22.122(8) Å, c = 7.856(5) Å, β = 118.77(2)°, V = 1140.7(11) ų, P2₁/n, Z = 2, R(F) = 0.0432, 1684 reflections with I > 3σ(I)) synthesized under identical conditions (en is ethylenediamine, o-HB is o-hydroxybenzoate, and o-AB is o-aminobenzoate). Although the compounds were assumed to have similar structures and the Cu-Lig bond lengths and the cis and trans angles are acceptable for an octahedral structure, the geometric parameters of o-HB suggest that the copper atom has a plane square environment.     

Reactions of <Emphasis Type="Italic">N</Emphasis>-acetyl- and <Emphasis Type="Italic">N</Emphasis>-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with <Emphasis Type="Italic">meta</Emphasis>-cloroperbenzoic acid

Reaction of N-ethoxycarbonyl-2-(1-cycloalken-1-yl)anilines with meta-cloroperbenzoic acid leads to the corresponding 2-[1-o-(3-chlorobenzoyl)-2-hydroxycyclopent-1-yl]anilines. 5-(2-Acetylaminophenyl)-5-oxopentanic or 6-oxohexanic acids are formed as main products in the reaction of N-acetyl-2-(1-cycloalken-1-yl)anilines with m-chloroperbenzoic acid in CH₂Cl₂. N-Acetyl-2-(1-cyclopenten-1-yl)-3,6-dimethylaniline is an exception in this series since its reaction stops at the stage of epoxide formation.     

Crystalline inclusion complexes of diterpenoid isosteviol with aromatic compounds

Crystalline inclusion complexes of diterpenoid isosteviol (ent-16-ketobeyeran-19-oic acid) with individual benzene, o-, m-, p-xylenes, ethylbenzene, isopropylbenzene, o-and m-nitoranilins, benzaldehyde, styrene and naphthalene are obtained and characterized by single crystal X-ray diffraction. As determined by GC and ¹H NMR spectroscopy, isosteviol selectively includes toluene from the equimolar benzene-toluene mixture, o-xylene from a commercial mixture of xylenes, o-and m-nitroanilins from their mixture with p-nitroanilin, and also styrene from styrene-ethylbenzene and styrene-isopropylbenzene mixtures thus yielding crystalline inclusion complexes.     

Compounds of the menthane series. Synthesis of unsaturated primary alcohols with the <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">p</Emphasis>-menthane skeletons

Precursors to terpene alcohols of the o- and p-menthane series (o-cimen-7-ol and o- and p-cimen-9-ols) were synthesized, and their reduction with lithium in ethylenediamine was studied. The reduction of o- and p-cimen-9-ols in the presence of isopropyl alcohol selectively afforded the corresponding 1,4-dihydro derivatives. Under analogous conditions, o-cimen-7-ol was converted into a mixture of unsaturated hydrocarbons. The reduction with lithium in ethylenediamine in the absence of isopropyl alcohol in all cases gave mixtures of menthene alcohols.     

NMR study of 1-aryl-1,2-dicarba-closo-dodecaboranes: intramolecular C-H?O hydrogen bonding in solution

Dicarba-closo-dodecaborane(12) (carborane) has recently received much attention as a building block for supramolecular assemblies and bioactive compounds. Among carborane isomers, 1,2-dicarba-closo-dodecaborane(12) (o-carborane) has unique chemical properties, including the ability of the o-carborane C-H hydrogens to form hydrogen bonds. To evaluate intramolecular hydrogen bond formation between the o-carborane C-H hydrogen and various hydrogen bond acceptors in solution, we have designed and synthesized 1-aryl-o-carboranes 2. Intramolecular hydrogen bonding ability was evaluated by means of ¹H NMR measurement of the o-carborane C-H hydrogen signal of 2. The 1-(2-methoxyphenyl)-o-carborane derivative 2m appeared to form an intramolecular hydrogen bond between o-carborane C-H hydrogen and the oxygen atom acting as a hydrogen bonding acceptor. In this study, we present evidence for hydrogen bond formation in solution between the o-carborane C-H and hydrogen bond acceptors positioned with appropriate geometry.     

DMT [(−)-(2<Emphasis Type="Italic">R</Emphasis>,3<Emphasis Type="Italic">R</Emphasis>)-2,3-dimethoxy-1,1,4,4-tetraphenylbutane-1,4-diol], a highly efficient host compound for nitroaromatic guests: selectivity,X-ray and thermal analyses

In this work, we reveal that the compound (?)-(2R,3R)-2,3-dimethoxy-1,1,4,4-tetraphenylbutane-1,4-diol (DMT) is a highly efficient host material for nitroaromatics o-nitrotoluene (o-NT), m-nitrotoluene (m-NT), p-nitrotoluene (p-NT) and nitrobenzene (NB). Each of these guests was included with a 2:1 host:guest ratio. The host displayed selectivity for p-NT and NB when these guests were mixed in equimolar proportions with any one of the other guest solvents, and the host recrystallized from this binary mixture. A selectivity order for the host in these conditions was thus noted to be NB?≈?p-NT?>?o-NT?>?m-NT. Furthermore, guests were also mixed in non-equimolar proportions and the host behaviour analysed, the results of which were in accordance with observations from the equimolar studies. Additionally, an equimolar quaternary experiment of all four guests provided a somewhat adjusted host selectivity order [p-NT (39.9%)?>?NB (30.2%)?>?m-NT (17.1%)?>?o-NT (12.8%)]. Single crystal diffraction analyses of all four complexes showed the crystals to share the same host packing, and comparable host–guest interactions were observed in each. However, thermal analyses, both DSC and TG, showed that the preferred guests p-NT and NB formed complexes with increased relative thermal stabilities, and this observation correlated with the selective behaviour of the host in competition experiments.     

Synthesis of new polydentate tweezers ligands of amido-amine type

A series of new tweezers amido-amine ligands containing pyrrole, bipyrrole, and dipyrrolylmethane fragments were synthesized by reaction of 2-thioxothiazolidin-3-yl derivatives of α-pyrrolecarboxylic acids {5-[1-(5-carboxy-3-methyl-4-phenyl-1H-pyrrol-2-yl)-1-methylethyl]-4-methyl-3-phenyl-1H-pyrrole-2-carboxylic acid, 5-[(5-carboxy-3-methyl-4-phenyl-1H-pyrrol-2-yl)phenylmethyl]-4-methyl-3-phenyl-1H-pyrrole-2-carboxylic acid, 5-(5-carboxy-3-methyl-4-phenyl-1H-pyrrol-2-yl)-4-methyl-3-phenyl-1H-pyrrole-2-carboxylic acid, and 3,4-dimethyl-pyrrole-2,5-dicarboxylic acid} with o-phenylenediamine. All compounds obtained were characterized by elemental analysis, NMR and mass spectra.     

Five-membered 2,3-dioxo heterocycles: LI. Reaction of 3-aroyl-2,4-dihydro-1<Emphasis Type="Italic">H</Emphasis>-pyrrolo[2,1-c][1,4]benzoxazine-1,2,4-triones with 3-amino-5,5-dimethylcyclohex-2-en-1-ones

3-Aroyl-2,4-dihydro-1H-pyrrolo[2,1-c][1,4]benzoxazine-1,2,4-triones react with N-unsubstituted and N-substituted 3-amino-5,5-dimethylcyclohex-2-en-1-ones to give 3′-aroyl-4′-hydroxy-1′-(o-hydroxy-phenyl)-6,6-dimethyl-6,7-dihydrospiro[indole-3,2′-pyrrole]-2,4,5′(1H,1′H,5H)-triones. The molecular and crystalline structure of the 1-cyclohexyl-substituted derivative was studied by X-ray analysis.     

Crystal Structure of 1,2-Bis(Acetoxymethyl)-<Emphasis Type="Italic">O</Emphasis>-Carborane

The crystal structure of 1,2-bis(acetoxymethyl)-o-carborane is determined by the X-ray crystallographic analysis.     

Reaction of 2-chloromethylphenols with enaminones

The reaction of o-(chloromethyl)phenols with enamino ketones afforded a series of 3-acyl- and 3-formyl-4H-chromenes as a result of cascade transformation including [4 + 2]-cycloaddition of enamino ketone to o-quinone methide generated in situ and subsequent elimination of secondary amine.     

Solid-state supramolecular array through cooperative π-π interactions of 1-(2-methoxyphenyl)-o-carborane

Dicarba-closo-dodecaborane (carborane) has received much attention as a building block for supramolecular assemblies and bioactive compounds. Among the carborane isomers, 1,2-dicarba-closo-dodecaborane (o-carborane) has unique chemical properties, including the ability of the o-carborane C-H hydrogens to form H-bonds. We have designed and synthesized 1-(2-methoxyphenyl)-o-carborane 1a to study its ability to form an intramolecular H-bond between the o-carborane C-H hydrogen and various H-bond acceptors both in solution and in the solid state. Intramolecular H-bonding ability in solution was evaluated by means of ¹H NMR spectroscopic measurements of the C-H hydrogen signal. The signal of the C-H hydrogen of 1a showed a remarkable downfield shift in CDCl₃ and various other solvents, i.e., the shift was almost solvent-independent. We suggest that 1a forms an intramolecular H-bond in these solvents. Crystal structure analysis of 1a showed a C-H?O distance of 2.05 Å and a nearly planar torsion angle C(2)-C(1)-C(7)-C(8) of 6.5°, indicating intramolecular C-H?O H-bond formation in the solid state. The crystal packing of 1a indicates that a supramolecular array is stabilized by cooperative π-π stacking interactions among the methoxyphenyl groups and by hydrophobic interactions of the o-carborane cages. DFT calculations indicate that the strength of the intramolecular H-bond of 1a is about 3.53 kcal/mol. These observations indicate the potential value of o-carborane in supramolecular chemistry and materials chemistry; it should be possible to design novel materials by utilizing both the H-bonding ability of the o-carborane C-H hydrogen and the high hydrophobicity of the o-carborane cage.     

Synthesis,structure, and antibacterial properties of ternary rare-earth complexes with <Emphasis Type="Italic">o</Emphasis>-methylbenzoic Acid and 1,10-phenanthroline

Ternary rare-earth complexes with o-methylbenzoic acid (o-MBA) and 1,10-phenanthroline (Phen) Ln₂(o-MBA)₆(Phen)₂ · nH₂O(n = 0, 1) (Ln = La, Pr, Y, Yb) were synthesized and characterized by elemental analysis, IR, X-ray diffraction, and TG-DTG means. The complex La₂(o-MBA)₆(Phen)₂ · H₂O (I) is composed of two species of binuclear molecules in which the La³⁺ ion is coordinated with two nitrogen atoms of Phen and seven oxygen atoms of carboxylate groups. The carboxylate groups were bonded to La³⁺ in three modes: chelating-bidentate, bridging-bidentate, and chelating-bridging tridentate. The La³⁺ ion adopted a vigorous distorted monocapped square antiprism geometry. Complex I belongs to the triclinic crystal system, P space group, lattice parameters: a = 13.058(3), b = 12.7584(11), c = 20.773(4) Å, α = 101.18(3)°, β = 93.88(3)°, γ = 115.82(3)°, V = 3283.0(11)ų, Z = 2, ρ_calcd = 1.484 mg/m³, M _r = 1467.06, F(000) = 1476, μ = 1.350 mm^-1. The structure was refined to R _l = 0.0631 and wR ₂ = 0.1504. The antibacterial activity test indicates that these complexes exhibit better antibacterial ability against Escherichia coli and Staphylococcus aureus than the corresponding rare-earth chloride or o-MBA.     

Cycloaddition and chlorotropic transformations in reactions of dichloromethylenetrifluoroacetamide with phosphites

Reactions of dichlormethylenetrifluoroacetamide with triphenyl phosphite, diethylchlorophosphite (o-phenylene)diethylamidophosphite, (o-phenylene)chlorphosphite, and 2-fluoro-3-isopropyl-5-tert-butyl-1,3,2-oxazaphospholine proceeded as cheletropic [4+1]-cycloaddition. The formed λ⁵-1,4,2-oxazaphospholines underwent 1,3-migration of the chlorine atom in C=N–C cyclic triad.     

Reductive acylamination of pyridine <Emphasis Type="Italic">N</Emphasis>-oxide with ethylenediamine and phenylenediamines

Reactions of pyridine N-oxide with ethylenediamine and o- and p-phenylenediamines in the presence of p-toluenesulfonyl chloride in alkaline medium lead to the formation of the corresponding N,N′-bis-(p-tolylsulfonyl)-N,N′-bis(pyridin-2-yl)diamines as a result of reductive acylamination.     

<Emphasis Type="Italic">N</Emphasis>-aryl-<Emphasis Type="Italic">o</Emphasis>-iminobenzoquinones as novel regulators of radical polymerization

The effect of a number of quinoid compounds on methyl methacrylate polymerization initiated by azo-bis(isobutyronitrile) has been studied. It has been revealed that N-aryl-o-iminobenzoquinones, in contrast to o-benzoquinones, can provide radical polymerization of methyl methacrylate in controllable mode. The efficiency of the compounds as chain growth regulators has been found to depend on their composition and reaction conditions. It has been established that 4,6-di-tert-butyl-N-(2,6-diethylphenyl)-o-iminobenzoquinone and 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone under radical initiation conditions provide the synthesis of poly(methyl methacrylate) with wide-range molecular weight, retaining polydispersity indices about ~1.4–1.8 up to deep conversions.     

Polymerization of methyl methacrylate in the presence of <Emphasis Type="Italic">o</Emphasis>-iminoquinones: Reversible and irreversible inhibition

New regulators of radical polymerization of methyl methacrylate based on N-(aryl)-o-iminoquinones of various structures are proposed. It is shown that samples of polymethylmethacrylate with the participation of N-(aryl)-o-iminobenzoquinones could be used as macroinitiators of polymerization. Optimal conditions to synthesize polymers in the presence of o-iminobenzoquinones are determined, which make it possible to obtain polymethylmethacrylate with a polydispersity coefficient of no more than 1.5 on deep conversions during bulk polymerization.     

The thermodynamic properties of the [(Me<Subscript>3</Subscript>Si)<Subscript>7</Subscript>C<Subscript>60</Subscript>]<Subscript>2</Subscript> fullerene complex

The temperature dependence of the heat capacity C _p ^o of the [(Me₃Si)₇C₆₀]₂ fullerene complex was measured for the first time using precision adiabatic vacuum calorimetry over the temperature range 6.7–340 K and high-accuracy differential scanning calorimetry at 320–635 K. For the most part, the error in the C _p ^o values was about ±0.5%. An irreversible endothermic effect caused by the splitting of the dimeric bond between fullerene fragments and the thermal decomposition of the complex was observed at 448–570 K. The thermodynamic characteristics of this transformation were calculated and analyzed. Multifractal analysis of the low-temperature (T < 50 K) heat capacity was performed, and conclusions were drawn concerning the character of the heterodynamicity of the structure. The experimental data obtained were used to calculate the standard thermodynamic functions C _p ^o (T), H ^o (T) ? H ^o (0), S ^o (T) ? S ^o (0), and G ^o (T) ? H ^o (0) over the temperature range from T → 0 to 445 K and estimate the standard entropy of formation of the compound from simple substances at 298.15 K. The standard thermodynamic properties of [(Me₃Si)₇C₆₀]₂ are compared with those of the (C₆₀)₂ dimer, the [(η⁶-Ph₂)₂Cr]⁺[C₆₀]^?? fulleride, and the initial C₆₀ fullerene.