Efficient and Rapid Synthesis of Radioactive Gold Nanoparticles by Dielectric Barrier Discharge

A compact bench‐top system based on a dielectric barrier plasma discharge (DBD), enables the rapid, automatable, and continuous‐flow synthesis of gold nanoparticles (AuNPs) and radioactive gold nanoparticles (¹⁹⁸AuNPs). AuNPs are used as radiosensitizers in oncology, and ¹⁹⁸AuNPs (half‐life: 2.7 d) have been suggested as potential cancer brachytherapy sources. Plasma applied at the surface of a liquid containing gold ions (AuCl₄^?) and dextran induces the production of AuNPs directly in water. This synthesis is monitored in real time by UV–visible spectrometry: the change of absorbance of the solution provides new insights on the growth dynamics of AuNPs by plasma synthesis. By balancing gold ions and surfactant molecules, particles with a diameter lying in the optimal range for radiosensitizing applications (28 ± 9 nm) are produced. The method yields a reduction of more than 99% of the gold ions within only 30 min of plasma treatment. A postsynthesis ripening of the AuNPs is revealed, monitored by UV–visible spectrometry, and quantified within the first few hours following plasma treatment. Radioactive ¹⁹⁸AuNPs are also produced by DBD synthesis and characterized by electron microscopy and single‐photon emission computed tomography imaging. The results confirm the efficiency of DBD reactors for AuNPs synthesis in oncology applications.     

Green synthesis and characterization of gold nanoparticles using extract of anti-tumor potent Crocus sativus

In the present study, we have explored anti-tumor potent Crocus sativus (saffron) as a reducing agent for one pot size controlled green synthesis of gold nanoparticles (AuNps) at ambient conditions. The nanoparticles were characterized using UV–vis, scanning electron microscope (SEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and FTIR analysis. The prepared AuNPs showed surface Plasmon resonance centered at 549 nm with average particle size of 15±5 nm. Stable, spherical and triangular crystalline AuNPs with well-defined dimensions were synthesized using anti-tumor potent Crocus sativus (saffron). Crystalline nature of the nanoparticles is confirmed from the HR-TEM, SAED and SEM images, and XRD patterns. From the FTIR spectra it is found that the biomolecules are responsible for capping in gold nanoparticles.     

Seed-mediated shape evolution of gold nanomaterials: from spherical nanoparticles to polycrystalline nanochains and single-crystalline nanowires

We studied the kinetics of the reduction of a gold precursor (HAuCl₄) and the effect of the molar ratio (R) of sodium citrate, which was introduced from a seed solution, and the gold precursor on the shape evolution of gold nanomaterials in the presence of preformed 13 nm gold nanoparticles as seeds. The reduction of the gold precursor by sodium citrate was accelerated due to the presence of gold seeds. Nearly single-crystalline gold nanowires were formed at a very low R value (R = 0.16) in the presence of the seeds as a result of the oriented attachment of the growing gold nanoparticles. At a higher R value (R = 0.33), gold nanochains were formed due to the non-oriented attachment of gold nanoparticles. At a much higher R value (R = 1.32), only larger spherical gold nanoparticles grown from the seeds were found. In the absence of gold seeds, no single-crystalline nanowires were formed at the same R value. Our results indicate that the formation of the 1D nanostructures (nanochains and nanowires) at low R values is due to the attachment of gold nanoparticles along one direction, which is driven by the surface energy reduction, nanoparticle attraction, and dipole–dipole interaction between adjacent nanoparticles.     

Colour tunability in a bimodal fluorescent hybrid nanostructure UCNPs@AuNPs@QDs

In the present work, lysine modified NaY_0.78Er_0.02Yb_0.2F₄ upconversion nanoparticles (UCNPs, positively charged) and lysine modified ZnSe:Mn²⁺ quantum dots (QDs, positively charged) are attached onto the surface of citrate reduced gold nanoparticles (AuNPs, negatively charged). The gold nanoparticles not only entangle the QDs and the UCNPs, through electrostatic interaction, but also tune the optical properties of UCNPs through the effect of surface plasmon resonance. The hybrid nanostructure gives green emission both through photoluminescence (under UV excitation) and through photon upconversion (under IR light excitation) process. The colour tuning is observed through variation in the size of QDs and through plasmonic effect of gold nanoparticles. In both the cases, the colour of emission gradually changes from green to red. The colour tunability and bi-modal photon conversion property of this material could be useful for its application in the field of bio-imaging and solar energy harvesting.     

Chemical composition of surface-functionalized gold nanoparticles

The composition of surface-functionalized gold nanoparticles (diameter of the metallic core: 17–20 nm) was determined by elemental analysis (C, H, N, S, Au, Na) after preparation of a larger batch. Gold nanoparticles were prepared and functionalized with citrate according to the classical Turkevich method. The citrate-functionalized nanoparticles contained about 3.1 wt% of organic material (135 ng cm⁻² or 3.1 molecules nm⁻²). A partial exchange of citrate was accomplished by tris(sodium-m-sulfonato-phenyl)phosphine (TPPTS) which led to 2.1 wt% of citrate (90 ng cm⁻² or 2.1 molecules nm⁻²) and 1.4 wt% TPPTS (61 ng cm⁻² or 0.6 molecules nm⁻²). The citrate coating was quantitatively exchanged by poly(N-vinyl pyrrolidone) (PVP) after immersion in solutions with concentrations of 33, 66 and 128 mg L^-1, respectively, leading to contents of 4 to 6 wt% of PVP (171–271 ng cm⁻² or 9–15 PVP monomer units nm⁻²).     

Hydrogen-assisted fabrication of spherical gold nanoparticles through sonochemical reduction of tetrachloride gold(III) ions in water

Spherical gold nanoparticles (AuNPs) were selectively synthesized through sonochemical reduction of tetrachloride gold(III) ions ([AuCl₄]⁻) in an aqueous solution of hydrogen tetrachloroaurate(III) tetrahydrate (HAuCl₄·4H₂O) with the aid of hydrogen (H₂) gas in the absence of any additional capping agents. On the other hand, various shaped-AuNPs such as spherical nanoparticles, triangular and hexagonal plates were formed from sonochemical reduction of [AuCl₄]⁻ in argon (Ar)-, nitrogen (N₂)- or oxygen (O₂)-purged aqueous [AuCl₄]⁻ solutions. The selective fabrication of spherical AuNPs assisted by H₂ gas is most likely attributed to the generation of hydrogen radicals (H) promoted by the reaction of H₂ introduced and hydrogen oxide radicals (OH) produced by sonolysis of water.     

Attachment of gold nanoparticles onto indium tin oxide surfaces controlled by adding citrate ions in a seed-mediated growth method

A simple approach to control the attachment of gold nanoparticles (AuNPs) onto the indium tin oxide (ITO) surfaces is reported. Adjusting the concentration of trisodium citrate in the Au colloid solution for the seeding process from 1 to 50 mM in the seed-mediated growth method, the dramatic changes in the SEM images and actual color were observed indicating the changes in nanostructures of AuNPs formed on the ITO surfaces. Whereas the attachment of smaller AuNPs with higher density were observed when 25 mM citrate ions were added in the seed solution, larger AuNPs were observed to attach at 50 mM. On the basis of this difference and the surface SEM images observed just after seeding, the roles of citrate ions were discussed. Consequently, it was inferred that the citrate ions affected the growth process as well as the seeding process. The repulsive power expected from the increased negative charges of citrate ions were not significant, but rather the dense attachment was promoted as the peculiar effect of citrate ions. Such control of the AuNPs attachment on ITO would be practically effective because the dense attachment can be performed by just changing the composition of the seed solution.     

Synthesis of gelatin-capped gold nanoparticles with variable gelatin concentration

Gelatin-stabilized gold nanoparticles (AuNPs-gelatin) with controlled particle size were synthesized with simple variation of concentration of gelatin by reducing in situ tetrachloroauric acid with sodium citrate. The nanoparticles showed excellent colloidal stability. Transmission electron microscopy (TEM) revealed the formation of well-dispersed gold nanoparticles (AuNPs) with different sizes. The methodology produces particles 10–15 nm in size depending on the concentration of gelatin used. The measured AuNPs are 10, 11, 12, 13, 14, and 15 nm for AuNPs-gelatin 1, 0.5, 0.25, 0.1 and 0.05%, and pure AuNPs, respectively. The AuNPs-gelatin exhibit size-dependent localized surface plasmon resonance behavior as measured by UV–visible spectroscopy. UV–vis spectroscopy and TEM results suggest that higher concentration of gelatin favor smaller particle size and vice versa. FTIR spectroscopy analysis of AuNPs-gelatin revealed the amino bands and carboxyl peak of gelatin. The crystalline nature of AuNPs was investigated by X-ray diffraction.     

Agglomeration behavior of lipid-capped gold nanoparticles

The current investigation deciphers aggregation pattern of gold nanoparticles (AuNPs) and lipid-treated AuNPs when subjected to aqueous sodium chloride solution with increasing ionic strengths (100–400 nM). AuNPs were synthesized using 0.29 mM chloroauric acid and by varying the concentrations of trisodium citrate (AuNP1 1.55 mM, AuNP2 3.1 mM) and silver nitrate (AuNP3 5.3 μM, AuNP4 10.6 μM) with characteristic LSPR peaks in the range of 525–533 nm. TEM analysis revealed AuNPs to be predominantly faceted nanocrystals with the average size of AuNP1 to be 35?±?5 nm, AuNP2 15?±?5 nm, AuNP3 30?±?5 nm, and AuNP4 30?±?5 nm and the zeta-average for AuNPs were calculated to be 31.23, 63.80, 26.08, and 28 nm respectively. Induced aggregation was observed within 10 s in all synthesized AuNPs while lipid-treated AuNP2 (AuNP2-L) was found to withstand ionic interferences at all concentration levels. However, lipid-treated AuNPs synthesized using silver nitrate and 1.55 mM trisodium citrate (AuNP3, AuNP4) showed much lower stability. The zeta potential values of lipid-treated AuNPs (AuNP1-L-1x/200, ??17.93?±?1.02 mV; AuNP2-L-1x/200, ??21.63?±?0.70; AuNP3-L-1x/200, ??14.54?±?0.90; AuNP3-L-1x/200 ??13.77?±?0.83) justified these observations. To summarize, AuNP1 and AuNP2 treated with lipid mixture 1 equals or above 1x/200 or 1x/1000 respectively showed strong resistance against ionic interferences (up to 400 mM NaCl). Use of lipid mixture 1 for obtaining highly stable AuNPs also provided functional arms of various lengths which can be used for covalent coupling.

Open image in new window

Graphical abstract Agglomeration behavior of gold nanoparticles before and after lipid capping

     

ICP-MS: a powerful technique for quantitative determination of gold nanoparticles without previous dissolving

A direct and simple inductively coupled plasma mass spectroscopy (ICP-MS) method for the determination of gold nanoparticles (AuNP) with different particle sizes ranging from 5 to 20 nm and suspended in aqueous solutions is described. The results show no significant difference compared to the determination of the same AuNPs after digestion, as claimed by the literature. The obtained limit of quantification of the method is 0.15 μg/L Au(III) that corresponds to 4.40 × 10⁹ AuNP/L, considering spherical AuNPs 15 nm sized. Spike recovery experiments have shown that the sample matrix is a significant factor influencing the accuracy of the measurement. Spike recoveries from 93% to 95% are found for AuNP samples prepared in trisodium citrate, while for deionized H₂O a spike recovery of around 80% was obtained. The sample preparation mode along with the ICP-MS parameters have been optimized and found to be crucial so as to achieve the required accuracy for the direct quantification of AuNP suspensions. The effect of the nanoparticle size upon the ICP-MS signal also was studied, and only significant differences due to the chemical environment and not to the AuNPs size were found.     

Biosynthesis of gold nanoparticles by Aspergillum sp. WL-Au for degradation of aromatic pollutants

A simple method for synthesis of gold nanoparticles (AuNPs) using Aspergillum sp. WL-Au was presented in this study. According to UV–vis spectra and transmission electron microscopy images, the shape and size of AuNPs were affected by different parameters, including buffer solution, pH, biomass and HAuCl₄ concentrations. Phosphate sodium buffer was more suitable for extracellular synthesis of AuNPs, and the optimal conditions for AuNPs synthesis were pH 7.0, biomass 100 mg/mL and HAuCl₄ 3 mM, leading to the production of spherical and pseudo-spherical nanoparticles. The biosynthesized AuNPs possessed excellent catalytic activities for the reduction of 2-nitrophenol, 3-nitrophenol, 4-nitrophenol, o-nitroaniline and m-nitroaniline in the presence of NaBH₄, and the catalytic rate constants were calculated to be 6.3×10⁻³ s⁻¹, 5.5×10⁻³ s⁻¹, 10.6×10⁻³ s⁻¹, 8.4×10⁻³ s⁻¹ and 13.8×10⁻³ s⁻¹, respectively. The AuNPs were also able to catalyze the decolorization of various azo dyes (e.g. Cationic Red X-GRL, Acid Orange II and Acid scarlet GR) using NaBH₄ as the reductant, and the decolorization rates reached 91.0–96.4% within 7 min. The present study should provide a potential candidate for green synthesis of AuNPs, which could serve as efficient catalysts for aromatic pollutants degradation.     

Ferritin as a photocatalyst and scaffold for gold nanoparticle synthesis

The ferrihydrite mineral core of ferritin is a semi-conductor capable of catalyzing oxidation/reduction reactions. This report shows that ferritin can photoreduce AuCl₄ ⁻ to form gold nanoparticles (AuNPs). An important goal was to identify innocent reaction conditions that prevented formation of AuNPs unless the sample was illuminated in the presence of ferritin. TRIS buffer satisfied this requirement and produced AuNPs with spherical morphology with diameters of 5.7 ± 1.6 nm and a surface plasmon resonance (SPR) peak at 530 nm. Size-exclusion chromatography of the AuNP–ferritin reaction mixture produced two fractions containing both ferritin and AuNPs. TEM analysis of the fraction close to where native ferritin normally elutes showed that AuNPs form inside ferritin. The other peak eluted at a volume indicating a particle size much larger than ferritin. TEM analysis revealed AuNPs adjacent to ferritin molecules suggesting that a dimeric ferritin–AuNP species forms. We propose that the ferritin protein shell acts as a nucleation site for AuNP formation leading to the AuNP-ferritin dimeric species. Ferrihydrite nanoparticles (~10 nm diameter) were unable to produce soluble AuNPs under identical conditions unless apo ferritin was present indicating that the ferritin protein shell was essential for stabilizing AuNPs in aqueous solution.     

Negative‐Imaging of Citrate Layers on Gold Nanoparticles by Ligand‐Templated Metal Deposition: Revealing Surface Heterogeneity

Surface heterogeneity of a metal nanoparticle is typically regarded as boundary defects and various crystalline facets. While organic capping ligands of a single type are assumed to be homogeneously distributed on the nanoparticle surface, heterogeneous surface coverage of citrate molecules on individual facets of gold nanoparticles (AuNPs) is revealed. Pt metallic clusters with 2 nm in diameter, epitaxially grown on the surface of AuNPs by chemical reaction and imaged by high‐resolution transmission electron microscopy, are utilized as negative‐imaging probes for densely packed adlayers where the underneath gold surface may not be accessible for Pt deposition. At pH > 5.0, citrate anions form only a loosely packed layer. At pH 4.5, citrates and citric acids form both loosely packed and densely packed layers that appear phase separated, and the densely packed domain as small as 5 nm × 5 nm is likely composed of fully protonated citric acids. IR spectra indicate that citric acid binds to a surface Au adatom through the oxygen atom of the central hydroxyl group, and similarly, citrate anions bind to Au adatoms through the carboxylate oxygen atom. This study also reveals the role of Au adatom in the adsorption of citrate species on the metallic surface of AuNPs.     

Surface-enhanced Raman spectroscopy coupled with gold nanoparticles for rapid detection of amoxicillin residues in duck meat

Antibiotic residues in meat pose serious threats to human beings and animals, and are one of the main food safety concerns all around the world. A novel method based upon surface-enhanced Raman spectroscopy (SERS) coupled with gold nanoparticles was developed in this study for rapid detection of amoxicillin residues in duck meat, one widely used in duck farming. Three different particle sizes of gold nanoparticles were synthesized using 0.3, 0.7, and 1.1?mL 1% trisodium citrate, while 0.7?mL was found to be the optimal volume as Raman enhancement substrate for the detection of amoxicillin residues in duck meat. The amounts of gold nanoparticles (0.5?mL), duck meat extract containing amoxicillin (50?μL), and sodium chloride solution (100?μL), as well as adsorption time (5?min) were optimized by single factor experiments. A calibration curve with the determination coefficient of 0.9661 was established for quantitative analysis of unknown amoxicillin samples. The average recoveries of amoxicillin residues in duck meat extract were 96–139%. This study provided a rapid and simple approach to analyze amoxicillin residues in duck meat in excess of 0.2?mg?L^?1 using SERS coupled with gold nanoparticles, which has the potential for wide applications in the detection of the antibiotic residues in meat.     

Assembly of Gold Nanoparticles on Gold Nanorods Using Functionalized Poly(N‐isopropylacrylamide) as Polymeric “Glue”

A telechelic thermoresponsive polymer, α‐amino‐ω‐thiol‐poly(N‐isopropylacrylamide) (H₂N‐PNiPAM‐SH), is used as the polymeric glue to assemble gold nanoparticles (AuNPs) around gold nanorods (AuNRs) into a satellite structure. Prepared by reversible addition‐fragmentation chain transfer polymerization followed by hydrazinolysis, H₂N‐PNiPAM‐SH is able to interlink the two types of the gold building blocks with the thiol‐end grafting on AuNRs and the amine‐end coordinating on the AuNP surface. The density of the grafted AuNPs on AuNRs can be tuned by adjusting the molar ratio between AuNPs and AuNRs in the feed. The resulted satellite‐like assembly exhibits unique optical property that was responsive to temperature change.     

Effect of Gold Nanoparticles and Unwanted Residues on Raman Spectra of Graphene Sheets

We report the effect of gold nanoparticles (AuNPs) and unwanted sodium citrate residues (UnR) left after deposition of AuNPs by drop-casting method on the Raman spectra of graphene sheets (GS). The AuNPs solution was deposited on three different substrates: 5.0 wt% Yb³⁺-doped (Q5) phosphate glass, silica glass (S1), and Si/SiO₂-300 nm (S2) substrates. For Q5 substrate, a slight increase in intensity of the G peak was observed, mostly for thinner layers, which can be attributed to a weak SERS effect shielded by UnR. The combination of the following aspects: a blue shift of the G band position, a slight increase in the FWHM (Full Width at Half Maximum), and a slight increase of the Raman intensities of both G and 2D bands in other GS without UnR supports the argument of shielded SERS effect. On the other hand, the effects of UnR on the S1 and S2 substrates produce a decrease on the Raman intensities of G and 2D bands, opposite to the effect produced by the AuNPs; this result was found more intense for the S2 substrate in relation to S1. This is possibly caused by the greater amount of UnR accumulated on the Si/SiO₂ substrate, due to its higher hydrophilicity in relation to other samples. Additional Raman measurements reveal that the Raman intensity of GS in all substrates is unaffected by the presence of a possible humidity on GS, revealing the effect of UnR. Hence, it is vital to understand how residues influence the salient features of GS/AuNPs.     

Rapid extra-/intracellular biosynthesis of gold nanoparticles by the fungus <Emphasis Type="Italic">Penicillium</Emphasis> sp.

In this work, the fungus Penicillium was used for rapid extra-/intracellular biosynthesis of gold nanoparticles. AuCl₄ ⁻ ions reacted with the cell filtrate of Penicillium sp. resulting in extracellular biosynthesis of gold nanoparticles within 1 min. Intracellular biosynthesis of gold nanoparticles was obtained by incubating AuCl₄ ⁻ solution with fungal biomass for 8 h. The gold nanoparticles were characterized by means of visual observation, UV–Vis absorption spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The extracellular nanoparticles exhibited maximum absorbance at 545 nm in UV–Vis spectroscopy. The XRD spectrum showed Bragg reflections corresponding to the gold nanocrystals. TEM exhibited the formed spherical gold nanoparticles in the size range from 30 to 50 nm with an average size of 45 nm. SEM and TEM revealed that the intracellular gold nanoparticles were well dispersed on the cell wall and within the cell, and they are mostly spherical in shape with an average diameter of 50 nm. The presence of gold was confirmed by EDX analysis.     

Synthesis of a Au‐on‐Pd Heteronanostructure Stabilized by Citrate and its Catalytic Application

The preparation of Au‐on‐Pd heteronanostructure (HNS) using citrate‐stabilized polycrystalline Pd nanoparticles (NPs) as the seeds is described. The resulting Au‐on‐Pd HNS is characterized and it is found that the formation of Au‐on‐Pd HNS depends greatly on a ratio between Pd seeds and AuCl₄^? ions added and the optimal molar ratio is 10:1. If fewer AuCl₄^? ions are added (Pd/Au ratio is 100:1), the growth of Au NPs only occurs on part of the Pd seeds’ surface. The addition of more AuCl₄^? ions (Pd/Au ratio is 5:1) hinders the growth of Au NPs on the Pd seeds’ surface. To demonstrate the catalytic performance, the electrochemistry oxidation of ethanol and the reduction of p‐nitrophenol by NaBH₄ are chosen to examine the catalytic activity of Au‐on‐Pd HNS. Pd seeds, Au NPs, and poly(vinyl pyrrolidone) (PVP)‐stabilized PdAu nanoalloy are used as the references for comparison. In the first reaction, the catalytic reactivity of Au‐on‐Pd HNS is better than that of corresponding pure Pd or Au NPs, while the opposite occurs for the latter reaction. The catalytic activity of Au‐on‐Pd HNS is much higher than that of PVP‐stabilized PdAu nanoalloy.     

Size control synthesis of starch capped-gold nanoparticles

Metallic gold nanoparticles have been synthesized by the reduction of chloroaurate anions [AuCl₄]⁻ solution with hydrazine in the aqueous starch and ethylene glycol solution at room temperature and at atmospheric pressure. The characterization of synthesized gold nanoparticles by UV–vis spectroscopy, high resolution transmission electron microscopy (HRTEM), electron diffraction analysis, X-ray diffraction (XRD), and X-rays photoelectron spectroscopy (XPS) indicate that average size of pure gold nanoparticles is 3.5 nm, they are spherical in shape and are pure metallic gold. The concentration effects of [AuCl₄]⁻ anions, starch, ethylene glycol, and hydrazine, on particle size, were investigated, and the stabilization mechanism of Au nanoparticles by starch polymer molecules was also studied by FT-IR and thermogravimetric analysis (TGA). FT-IR and TGA analysis shows that hydroxyl groups of starch are responsible of capping and stabilizing gold nanoparticles. The UV–vis spectrum of these samples shows that there is blue shift in surface plasmon resonance peak with decrease in particle size due to the quantum confinement effect, a supporting evidence of formation of gold nanoparticles and this shift remains stable even after 3 months.     

Optimization of components in high-yield synthesis of block copolymer-mediated gold nanoparticles

The optimization to achieve stable and high-yield gold nanoparticles in block copolymer-mediated synthesis has been examined. Gold nanoparticles are synthesized using block copolymer P85 in gold salt HAuCl₄·3H₂O solution. This method usually has a very limited yield which does not simply increase with the increase in the gold salt concentration. We show that the yield can be enhanced by increasing the block copolymer concentration but is limited to the factor by which the concentration is increased. On the other hand, the presence of an additional reductant (trisodium citrate) in 1:1 molar ratio with gold salt enhances the yield by manyfold. In this case (with additional reductant), the stable and high-yield nanoparticles having size about 14 nm can be synthesized at very low block copolymer concentrations. These nanoparticles thus can be efficiently used for their application such as for adsorption of proteins.