Recoverable solution reaction of HiPco carbon nanotubes with hydrogen peroxide

There is increasing interest in developing single-walled carbon nanotubes (SWNTs)-based optical biosensors for remote or in vitro and in vivo sensing because the near-IR optical properties of SWNTs are very sensitive to surrounding environmental changes. Many enzyme-catalyzed reactions yield hydrogen peroxide (H(2)O(2)) as a product. To our knowledge, there is no report on the interaction of H(2)O(2) with SWNTs from the optical sensing point of view. Here, we study the reaction of H(2)O(2) with an aqueous suspension of water-soluble (ws) HiPco SWNTs encased in the surfactant sodium dodecyl sulfate (SDS). The SWNTs are optically sensitive to hydrogen peroxide in pH 6.0 buffer solutions through suppression of the near-IR absorption band intensity. Interestingly, the suppressed spectral intensity of the nanotubes recovers by increasing the pH, by decomposing the H(2)O(2) into H(2)O and O(2) with the enzyme catalase, and by dialytically removing H(2)O(2). Preliminary studies on the mechanisms suggest that H(2)O(2) withdraws electrons from the SWNT valence band by charge transfer, which suppresses the nanotube spectral intensity. The findings suggest possible enzyme-assisted molecular recognition applications by selective optical detection of biological species whose enzyme-catalyzed products include hydrogen peroxide.     

Effects of surfactant and boron doping on the BWF feature in the Raman spectrum of single-wall carbon nanotube aqueous dispersions

We examine the Breit-Wigner-Fano (BWF) line shape in the Raman spectra of carbon single-wall nanotubes (SWNTs) dispersed in aqueous suspensions. Bundling and electronic effects are studied by comparing undoped SWNTs (C-SWNTs) to boron-doped nanotubes (B-SWNTs) in a variety of different surfactant solutions. For SWNTs dispersed with nonionic surfactants that are less effective in debundling than ionic surfactants, the Raman spectra retain a large BWF feature. However, we demonstrate that even for SWNTs dispersed as isolated nanotubes by ionic surfactants the BWF feature may be present and that the intensity of the BWF is highly sensitive to the specific surfactant. In particular, surfactants with electron-donating groups tend to enhance the BWF feature. Also, modification of the SWNT electronic properties by boron doping leads to enhanced surfactant dispersion relative to undoped C-SWNTs and also to modification of the BWF feature. These observations are in agreement with reports demonstrating an enhancement of the BWF by bundling but also agree with reports that suggest electron donation can enhance the BWF feature even for isolated SWNTs. Importantly, these results serve to caution against using the lack or presence of a BWF feature as an independent measure of SWNT aggregation in surfactant dispersions.     

Effects of ionic surfactant adsorption on single-walled carbon nanotube thin film devices in aqueous solutions

Field-effect transistors were fabricated using high-density single-walled carbon nanotube (SWNT) thin films directly grown on suitable substrates. Such approach eliminated the variations of device behaviors in individual SWNT devices by utilizing a large number of SWNTs in each device. We have found that the behaviors of such devices are closely related to the surface charge densities around SWNTs in aqueous solutions. Adsorption of ionic surfactants on the surface could significantly modulate the device characteristics, which could be detected by measuring the conductance of the devices. The devices could be tuned to be sensitive to either anionic or cationic surfactants by tailoring the surface properties of SiO(2) substrates around SWNTs. This effect could be potentially used to design chemical and biological sensors.     

Noncovalent functionalization of single-walled carbon nanotubes with water-soluble porphyrins

We have employed water-soluble porphyrin molecules [meso-(tetrakis-4-sulfonatophenyl) porphine dihydrochloride] to solubilize single-walled carbon nanotubes (SWNTs), resulting in aqueous solutions that are stable for several weeks. The porphyrin-nanotube complexes have been characterized with absorption and fluorescence spectroscopy and with AFM. We find that the porphyrin/SWNT interaction is selective for the free base form, and that this interaction stabilizes the free base against protonation to the diacid. Under mildly acidic conditions nanotube-mediated J-aggregates form, which are unstable in solution and result in precipitation of the nanotubes over the course of a few days. Porphyrin-coated SWNTs can be precisely aligned on hydrophilic poly(dimethylsiloxane) (PDMS) surfaces by combing SWNT solution along a desired direction and then transferred to silicon substrates by stamping. Parallel SWNT patterns have been fabricated in this manner.     

Optical Properties of Single-Walled Carbon Nanotubes Separated in a Density Gradient; Length, Bundling, and Aromatic Stacking Effects

Single-walled carbon nanotubes (SWNTs) are promising materials for in vitro and in vivo biological applications due to their high surface area and inherent near infrared photoluminescence and Raman scattering properties. Here, we use density gradient centrifugation to separate SWNTs by length and degree of bundling. Following separation, we observe a peak in photoluminescence quantum yield (PL QY) and Raman scattering intensity where SWNT length is maximized and bundling is minimized. Individualized SWNTs are found to exhibit high PL QY and high resonance-enhanced Raman scattering intensity. Fractions containing long, individual SWNTs exhibit the highest PL QY and Raman scattering intensities, compared to fractions containing single, short SWNTs or SWNT bundles. Intensity gains of approximately ~1.7 and 4-fold, respectively, are obtained compared with the starting material. Spectroscopic analysis reveals that SWNT fractions at higher displacement contain increasing proportions of SWNT bundles, which causes reduced optical transition energies and broadening of absorption features in the UV-Vis-NIR spectra, and reduced PL QY and Raman scattering intensity. Finally, we adsorb small aromatic species on "bright," individualized SWNT sidewalls and compare the resulting absorption, PL and Raman scattering effects to that of SWNT bundles. We observe similar effects in both cases, suggesting aromatic stacking affects the optical properties of SWNTs in an analogous way to SWNT bundles, likely due to electronic structure perturbations, charge transfer, and dielectric screening effects, resulting in reduction of the excitonic optical transition energies and exciton lifetimes.     

Real‐Time Nitrophenol Detection Using Single‐Walled Carbon Nanotube Based Devices

Single‐walled carbon nanotube (SWNT) based devices have been developed for the real‐time detection of nitrophenols in aqueous solution. SWNTs are assembled to electrodes using AC dielectrophoresis technique. The SWNT devices exhibit not only high sensitivity to nitrophenol compounds, but also good reusability. Charge transfer between nitro group and SWNTs, and the metal‐nanotube interface modification are hypothesized to be the possible origins of conductance change. These results indicated that the SWNT devices can be utilized as a simple, low cost, sensitive, and reusable platform for real‐time detection of nitrophenol compounds.     

Noncovalent functionalization of DNA-wrapped single-walled carbon nanotubes with platinum-based DNA cross-linkers

A method for noncovalent functionalization of DNA-wrapped single-walled carbon nanotubes (SWNTs) using platinum-based DNA cross-linkers is investigated. In particular, cisplatin and potassium tetrachloroplatinate are shown to bind to DNA that encapsulates SWNTs in aqueous solution. The bound platinum salt can then be reduced to decorate the DNA-encapsulated SWNTs with platinum nanoparticles. The resulting SWNT/DNA/Pt hybrids are investigated by optical absorption spectroscopy, circular dichroism spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, and atomic force microscopy. The unique combination of catalytic activity of nanoscale platinum, biological functionality of DNA, and optoelectronic properties of SWNTs suggests a myriad of applications including fuel cells, catalysts, biosensors, and electrochemical devices.     

Raman spectroscopy of individual single-walled carbon nanotubes from various sources

Resonance Raman spectroscopy/microscopy was used to study individualized single-walled carbon nanotubes (SWNTs) both in aqueous suspensions as well as after spin-coating onto Si/SiO2 surfaces. Four different SWNT materials containing nanotubes with diameters ranging from 0.7 to 1.6 nm were used. Comparison with Raman data obtained for suspensions shows that the surface does not dramatically affect the electronic properties of the deposited tubes. Raman features observed for deposited SWNTs are similar to what was measured for nanotubes directly fabricated on surfaces using chemical vapor deposition (CVD) methods. In particular, individual semiconducting tubes could be distinguished from metallic tubes by their different G-mode line shapes. It could also be shown that the high-power, short-time sonication used to generate individualized SWNT suspensions does not induce defects in great quantities. However, (additional) defects can be generated by laser irradiation of deposited SWNTs in air, thus giving rise to an increase of the D-mode intensity for even quite low power densities (approximately 10(4) W/cm2).     

Noble metal coated single-walled carbon nanotubes for applications in surface enhanced Raman scattering imaging and photothermal therapy

Single-walled carbon nanotubes (SWNTs) with various unique optical properties are interesting nanoprobes widely explored in biomedical imaging and phototherapies. Herein, DNA-functionalized SWNTs are modified with noble metal (Ag or Au) nanoparticles via an in situ solution phase synthesis method comprised of seed attachment, seeded growth, and surface modification with polyethylene glycol (PEG), yielding SWNT-Ag-PEG and SWNT-Au-PEG nanocomposites stable in physiological environments. With gold or silver nanoparticles decorated on the surface, the SWNT-metal nanocomposites gain an excellent concentration and excitation-source dependent surface-enhanced Raman scattering (SERS) effect. Using a near-infrared (NIR) laser as the excitation source, targeted Raman imaging of cancer cells labeled with folic acid (FA) conjugated SWNT-Au nanocomposite (SWNT-Au-PEG-FA) is realized, with images acquired in significantly shortened periods of time as compared to that of using nonenhanced SWNT Raman probes. Owing to the strong surface plasmon resonance absorption contributed by the gold shell, the SWNTs-Au-PEG-FA nanocomposite also offers remarkably improved photothermal cancer cell killing efficacy. This work presents a facile approach to synthesize water-soluble noble metal coated SWNTs with a strong SERS effect suitable for labeling and fast Raman spectroscopic imaging of biological samples, which has been rarely realized before. The SWNT-Au-PEG nanocomposite developed here may thus be an interesting optical theranostic probe for cancer imaging and therapy.     

Liquid crystal behavior of single-walled carbon nanotubes dispersed in biological hyaluronic acid solutions

We report the spontaneous liquid crystal phase separation of nanotubes (single-walled carbon nanotubes, SWNTs) stabilized in aqueous biological (hyaluronic acid, HA) solutions. Sonication of SWNTs in solutions of HA produced well-dispersed single-phase isotropic dispersions which, over time, phase separated into dispersions containing birefringent nematic domains in equilibrium with an isotropic phase. The time required for phase separation to occur was shown to depend on the concentration of SWNT and HA, with the attractive interactions between the SWNT and HA shifting the onset of the phase separation toward lower concentration. This phase separation is accompanied by an increase in the dispersion viscosity with this increase qualitatively matching the degree of phase separation. The formation of ordered phases in biological media can offer wide opportunities for processing conducting biomaterials with aligned and oriented domains.     

Synthesis and characterization of water soluble single-walled carbon nanotube graft copolymers

Poly(aminobenzene sulfonic acid) (PABS) and polyethylene glycol (PEG) were covalently attached to single-walled carbon nanotubes (SWNTs) to form water-soluble graft copolymers. Quantitative near-IR (NIR) spectroscopic studies of these SWNT graft copolymers indicate a water solubility of about 5 mg/mL, and atomic force microscopy studies show a fairly uniform length and diameter. On the basis of thermogravimetric analysis, the loading of SWNTs in the graft copolymers is estimated to be 30% for SWNT-PABS and 71% for SWNT-PEG. NIR spectroscopic studies of SWNT-PABS show that this graft copolymer has a ground state that is a hybrid of the electronic structures of the isolated PABS and SWNT macromolecules.     

Single-walled carbon nanotube (SWNT)-carboxymethylcellulose (CMC) dispersions in aqueous solution and electronic transport properties when dried as thin film conductors

Obtaining uniformly dispersed SWNT within an aqueous mixture for subsequent use as a dried coating in electronic biosensors is a challenge. The objective of this study is to relate SWNT dispersion conditions to resultant dried film properties. Aqueous solutions of SWNT dispersed with CMC (a dispersing agent with unique properties compatible with biomolecules) at different SWNT:CMC weight ratios and at different sonication conditions were studied. Solution particle size distribution data was obtained using dynamic light scattering. Differently formulated/processed SWNT/CMC solutions were used to form dry thin, conductive films. The resistance of each film was measured and its resistivity calculated. Response Surface Methodology (RSM) design of experiments (DOE) analysis was used as the tool to fit the data to establish a model and identify trends for the parameters studied. Profilometry was used to examine film surface uniformity. 3D optical microscopy was used to investigate film morphology and determine film thickness, and to relate these data back to solution dispersion conditions and dried film resistances. The lowest dried film resistivity (0.012 ohm-cm) was obtained at the highest levels of parameters studied in the DOE. Smaller solution particle size resulted in lower dried film surface roughness and better film uniformity.     

A biomimetic "polysoap" for single-walled carbon nanotube dispersion

As-synthesized single-walled carbon nanotubes (SWNTs) are bundled mixtures of different species. The current challenge in the field of carbon nanotube research lies in the processing and separation of SWNTs, which first require efficient dispersion of individual SWNTs in solvents. We report DNA-mimicking polysoap surfactants that disperse SWNTs in aqueous solutions more effectively than DNA. The polysoaps are synthesized by functionalizing the side chain of poly(styrene-alt-maleic acid) with aminopyrene. The synthetic nature of the polysoap opens a new approach to further optimization of not only SWNT dispersion efficiency but also multi-functional SWNT dispersing surfactant.     

Preparation of single-walled carbon nanotube (SWNT) gel composites using poly(ionic liquids)

This paper reports a new and practical route for synthesizing nanotube-polymeric ionic liquids gel by non-covalent functionalization of oxidized single-walled carbon nanotube (SWNT) surfaces with imidazolium-based poly(ionic liquids) (PILs), using in situ radical polymerization method. A black and homogeneous precipitate SWNTs was obtained as a gel form, which is well dispersed in aqueous solution without any aggregation. The formation of SWNT gels is explained by the electrostatic attractions or π-bonds between the SWNT surface and the PIL matrix. By anion-exchange reaction of PIL bound to SWNTs, hydrophilic anions in PIL were substituted with hydrophobic anions, resulting in an effective transfer of SWNT-PIL hydrogels to organogels. The result also showed that SWNTs can effectively improve the conductivity along with the thermal stability of nanocomposite gels.     

Dissociation of electrolytes in a nano-aqueous system within single-wall carbon nanotubes

Research on material incorporation within single-wall carbon nanotubes (SWNTs) through aqueous solutions of various electrolytes is performed for the purpose of providing a foundation for future application of SWNTs to, for example, drug delivery systems. We have determined that the optical spectra of SWNTs were significantly affected when SWNTs that had opened holes or removed caps were treated through immersion in an aqueous solution of electrolytes, followed by drying at room temperature; however, the spectra of SWNTs without opened holes or removed caps were not subjected to such treatment. We infer that when the sucked solutions remained inside the tubes, even after drying (the nano-aqueous system), the electrolyte was dissociated into ions, which was likely to change the electronic states of SWNTs. On the other hand, when the SWNTs were well-dried under vacuum, no remarkable changes in their optical spectra were observed.     

Multiplexed multicolor Raman imaging of live cells with isotopically modified single walled carbon nanotubes

We show that single walled carbon nanotubes (SWNTs) with different isotope compositions exhibit distinct Raman G-band peaks and can be used for multiplexed multicolor Raman imaging of biological systems. Cancer cells with specific receptors are selectively labeled with three differently "colored" SWNTs conjugated with various targeting ligands including Herceptin (anti-Her2), Erbitux (anti-Her1), and RGD peptide, allowing for multicolor Raman imaging of cells in a multiplexed manner. SWNT Raman signals are highly robust against photobleaching, allowing long-term imaging and tracking. With narrow peak features, SWNT Raman signals are easily differentiated from the autofluorescence background. The SWNT Raman excitation and scattering photons are in the near-infrared region, which is the most transparent optical window for biological systems in vitro and in vivo. Thus, SWNTs are novel Raman tags promising for multiplexed biological detection and imaging.     

Simulation of adsorption of DNA on carbon nanotubes

We report molecular dynamics simulations of DNA adsorption on a single-walled carbon nanotube (SWNT) in an aqueous environment. We have modeled a DNA segment with 12 base pairs (Dickerson dodecamer) and a (8,8) SWNT in water, with counterions to maintain total charge neutrality. Simulations show that DNA binds to the external surface of an uncharged or positively charged SWNT on a time scale of a few hundred picoseconds. The hydrophobic end groups of DNA are attracted to the hydrophobic SWNT surface of uncharged SWNTs, while the hydrophilic backbone of DNA does not bind to the uncharged SWNT. The binding mode of DNA to charged SWNTs is qualitatively different from uncharged SWNTs. The phosphodiester groups of the DNA backbone are attracted to a positively charged SWNT surface while DNA does not adsorb on negatively charged SWNTs. There is no evidence for canonical double-stranded DNA wrapping around either charged or uncharged SWNTs on the very short time scales of the simulations. The adsorption process appears to have negligible effect on the internal stacking structure of the DNA molecule but significantly affects the A to B form conversion of A-DNA. The adsorption of A-DNA onto an uncharged SWNT inhibits the complete relaxation of A-DNA to B-DNA within the time scale of the simulations. In contrast, binding of the A-DNA onto a positively charged SWNT may promote slightly the A to B conversion.     

Free-standing highly conductive transparent ultrathin single-walled carbon nanotube films

Transparent and conductive single-walled carbon nanotube (SWNT) films are of great importance to a number of applications such as optical and electronic devices. Here, we describe a simple approach for preparing free-standing highly conductive transparent SWNT films with a 20-150 nm thickness by spray coating from surfactant-dispersed aqueous solutions of SWNTs synthesized by an improved floating-catalyst growth method. After the HNO(3) treatment, dipping the SWNT films supporting on glass substrates in water resulted in a quick and nondestructive self-release to form free-standing ultrathin SWNT films on the water surface. The obtained films have sufficiently high transmittance (i.e., 95%), a very low sheet resistance (i.e., ～120 Ω/sq), and a small average surface roughness (i.e., ～3.5 nm for a displayed 10 × 10 μm area). Furthermore, the floating SWNT films on the water surface were easily transferred to any substrates of interest, without intense mechanical and chemical treatments, to preserve their original sizes and network structures. For example, the transferred SWNT films on poly(ethylene terephthalate) films are mechanically flexible, which is a great advantage over conventional indium-tin oxide (ITO) and therefore strongly promise to be "post ITO" for many applications.     

Optically sensing additional sonication effects on dispersed HiPco nanotubes in aerated water

Ultrasonication is a necessary process to make single-walled carbon nanotubes (SWNTs) soluble in aqueous solution with surfactants such as sodium dodecyl sulfate (SDS). However, an understanding of the sonication effects on the electronic and optical properties of SWNTs in aqueous solution is still lacking. Here, we have observed that sonication-induced pH changes suppress the optical transitions of the first interband transition pair (S11) in the density of states of semiconducting SWNTs while other possible intermediates induced by sonication contribute less significantly to the observed spectral changes without the involvement of sonication-induced pH decrease. The suppressed S11 peaks can be restored by adding basic solution, suggesting that the lattice structure of SWNTs is undisrupted by the sonication used here. The absorbance of S11 peaks shows a nearly linear relationship with sonication-induced pH changes in the narrow pH range of 5.2 and 6.1. The results indicate that SDS-encased SWNTs may be used as an indicator for sonolysis-related applications.     

Structural modifications of ionic liquid surfactants for improving the water dispersibility of carbon nanotubes: an experimental and theoretical study

The 1-hexadecyl-3-vinylimidazolium bromide (hvimBr), a water-soluble long-chain imidazolium ionic liquid (IL) with surfactant properties, showed the ability to produce stable homogeneous aqueous dispersions of pristine Single-Walled Carbon Nanotubes (SWNTs). The purpose of this study is the improvement of SWNT dispersing ability by assessing the effect of different groups in position 3 of the imidazole ring. In this regard structural analogues were synthesized and, after characterization, their capability to dissolve SWNTs in water was investigated. Molecular Dynamics (MD) simulations have been performed to provide a semi-quantitative indication of the affinity of each dispersing agent toward SWNT and to attempt an explanation of the experimental results.