Observation of photocatalytic dissociation of water on terminal Ti sites of TiO2(110)-1 × 1 surface

The water splitting reaction based on the promising TiO(2) photocatalyst is one of the fundamental processes that bears significant implication in hydrogen energy technology and has been extensively studied. However, a long-standing puzzling question in understanding the reaction sequence of the water splitting is whether the initial reaction step is a photocatalytic process and how it happens. Here, using the low temperature scanning tunneling microscopy (STM) performed at 80 K, we observed the dissociation of individually adsorbed water molecules at the 5-fold coordinated Ti (Ti(5c)) sites of the reduced TiO(2) (110)-1 × 1 surface under the irradiation of UV lights with the wavelength shorter than 400 nm, or to say its energy larger than the band gap of 3.1 eV for the rutile TiO(2). This finding thus clearly suggests the involvement of a photocatalytic dissociation process that produces two kinds of hydroxyl species. One is always present at the adjacent bridging oxygen sites, that is, OH(br), and the other either occurs as OH(t) at Ti(5c) sites away from the original ones or even desorbs from the surface. In comparison, the tip-induced dissociation of the water can only produce OH(t) or oxygen adatoms exactly at the original Ti(5c) sites, without the trace of OH(br). Such a difference clearly indicates that the photocatalytic dissociation of the water undergoes a process that differs significantly from the attachment of electrons injected by the tip. Our results imply that the initial step of the water dissociation under the UV light irradiation may not be reduced by the electrons, but most likely oxidized by the holes generated by the photons.     

Effect of Hydrogen on O2 Adsorption and Dissociation on a TiO2 Anatase (001) Surface

The effect of hydrogen on the adsorption and dissociation of the oxygen molecule on a TiO₂ anatase (001) surface is studied by first‐principles calculations coupled with the nudged elastic band (NEB) method. Hydrogen adatoms on the surface can increase the absolute value of the adsorption energy of the oxygen molecule. A single H adatom on an anatase (001) surface can lower dramatically the dissociation barrier of the oxygen molecule. The adsorption energy of an O₂ molecule is high enough to break the O?O bond. The system energy is lowered after dissociation. If two H adatoms are together on the surface, an oxygen molecule can be also strongly adsorbed, and the adsorption energy is high enough to break the O?O bond. However, the system energy increases after dissociation. Because dissociation of the oxygen molecule on a hydrogenated anatase (001) surface is more efficient, and the oxygen adatoms on the anatase surface can be used to oxidize other adsorbed toxic small gas molecules, hydrogenated anatase is a promising catalyst candidate.     

The importance of bulk Ti3+ defects in the oxygen chemistry on titania surfaces

The role of bulk defects in the oxygen chemistry on reduced rutile TiO(2)(110)-(1 × 1) has been studied by means of temperature-programmed desorption spectroscopy and scanning tunneling microscopy measurements. Following O(2) adsorption at 130 K, the amount of O(2) desorbing at ～410 K initially increased with increasing density of surface oxygen vacancies but decreased after further reduction of the TiO(2)(110) crystal. We explain these results by withdrawal of excess charge (Ti(3+)) from the TiO(2)(110) lattice to oxygen species on the surface and by a reaction of Ti interstitials with O adatoms upon heating. Important consequences for the understanding of the O(2)-TiO(2) interaction are discussed.     

Probe microscope observation of platinum atoms deposited on the TiO2(110)-(1 x 1) surface

Titanium dioxide (TiO2) (110) surfaces with Pt adatoms were examined using a noncontact atomic force microscope (NC-AFM) and a Kelvin probe force microscope (KPFM). Topographic images with NC-AFM identify Pt atoms adsorbed at three different sites. These sites are on the Ti atom rows, on the O atom rows, and in O atom vacancies. Most Pt adatoms were observed on Ti atom rows. Successively recorded images show that the Pt adatoms on Ti atom rows (adatoms A) and O atom rows (adatoms C) are mobile while the adatoms in the O atom vacancies (adatoms B) are not. Adatoms A and adatoms B were identified in KPFM images. However, adatoms C were not visualized in KPFM images because they moved quickly or were swept out by the tip. The KPFM measurements reveal that the work function on adatoms A are lower than that on the surrounding (1 x 1) surface by 0.24 eV whereas adatoms B reduced the work function by 0.26 eV. The work function decrease is interpreted with an electric dipole moment directed toward the vacuum, as a result of electron transfer from the adatoms to the TiO2 substrate. In an O atom vacancy, the adatom B is in contact with two Ti atoms and therefore the electron transfer can be enhanced.     

Dynamics of H2 dissociation on the 1/2 ML c(2 × 2)-Ti/Al(100) surface

The dissociation of H(2) on Ti-covered Al surfaces is relevant to the rehydrogenation and dehydrogenation of the NaAlH(4) hydrogen storage material. The energetically most stable structure for a 1/2 monolayer of Ti deposited on the Al(100) surface has the Ti atoms in the second layer with a c(2 × 2) structure, as has been confirmed by both low-energy electron diffraction and low-energy ion scattering experiments and density functional theory studies. In this work, we investigate the dynamics of H(2) dissociation on a slab model of this Ti/Al(100) surface. Two six-dimensional potential energy surfaces (PESs) have been built for this H(2) + Ti/Al(100) system, based on the density functional theory PW91 and RPBE exchange-correlation functionals. In the PW91 (RPBE) PES, the lowest H(2) dissociation barrier is found to be 0.65 (0.84) eV, with the minimum energy path occurring for H(2) dissociating above the bridge to top sites. Using both PESs, H(2) dissociation probabilities are calculated using the classical trajectory (CT), the quasi-classical trajectory (QCT), and the time-dependent wave-packet methods. We find that the QCT H(2) dissociation probabilities are in good agreement with the quantum dynamics results in the collision energy range studied up to 1.0 eV. We have also performed molecular beam simulations and present predictions for molecular beam experiments. Our molecular beam simulations show that H(2) dissociation on the 1/2 ML Ti/Al(100) surface is an activated process, and the reaction probability is found to be 6.9% for the PW91 functional and 1.8% for the RPBE at a nozzle temperature of 1700 K. Finally, we have also calculated H(2) dissociation rate constants by applying transition state theory and the QCT method, which could be relevant to modeling Ti-catalyzed rehydrogenation and dehydrogenation of NaAlH(4).     

N2O decomposition on TiO2 (110) from dynamic first-principles calculations

We have carried out a systematic study of N(2)O dissociation on a TiO(2) (110) surface by means of plane-wave pseudopotential density-functional theory calculations. We have made use of both static and dynamic calculations in order to elucidate N(2)O decomposition mechanisms. We find that dissociation is not favorable on the stoichiometric surface. On the other hand, the presence of oxygen bridging vacancies make the N(2)O decomposition possible. The role of the defective surface is to provide electrons to the adsorbed molecule. We find two channels for decomposition, depending on whether the molecule is adsorbed with the O or the N end of the molecule on a vacancy. The first case is energetically downhill and proceeds spontaneously, leading to N(2) ejection from the surface and vacancy oxidation. The second case relies on the formation of an intermediate bridging configuration of the adsorbed molecule and is hindered by a small energy barrier. In this case, molecule breaking produces N(2) in the gas phase and leaves oxygen adatoms on the surface. We relate our results to recent experimental findings.     

二氧化钛(TiO2)表面上水分解反应的理论研究

模拟了较大的反应体系, 希望能与实验进行比较, 更好地解释实验结果, 理解反应过程.     

The mechanism of emerging catalytic activity of gold nano-clusters on rutile TiO2(110) in CO oxidation reaction

This paper reveals the fact that the O adatoms (O(ad)) adsorbed on the 5-fold Ti rows of rutile TiO(2)(110) react with CO to form CO(2) at room temperature and the oxidation reaction is pronouncedly enhanced by Au nano-clusters deposited on the above O-rich TiO(2)(110) surfaces. The optimum activity is obtained for 2D clusters with a lateral size of ～1.5 nm and two-atomic layer height corresponding to ～50 Au atoms∕cluster. This strong activity emerging is attributed to an electronic charge transfer from Au clusters to O-rich TiO(2)(110) supports observed clearly by work function measurement, which results in an interface dipole. The interface dipoles lower the potential barrier for dissociative O(2) adsorption on the surface and also enhance the reaction of CO with the O(ad) atoms to form CO(2) owing to the electric field of the interface dipoles, which generate an attractive force upon polar CO molecules and thus prolong the duration time on the Au nano-clusters. This electric field is screened by the valence electrons of Au clusters except near the perimeter interfaces, thereby the activity is diminished for three-dimensional clusters with a larger size.     

Hydrogen dissociation and diffusion on Ni- and Ti-doped Mg(0001) surfaces

It is well-known, both theoretically and experimentally, that alloying MgH(2) with transition elements can significantly improve the thermodynamic and kinetic properties for H(2) desorption, as well as the H(2) intake by Mg bulk. Here, we present a density functional theory investigation of hydrogen dissociation and surface diffusion over a Ni-doped surface and compare the findings to previously investigated Ti-doped Mg(0001) and pure Mg(0001) surfaces. Our results show that the energy barrier for hydrogen dissociation on the pure Mg(0001) surface is high, while it is small/null when NiTi are added to the surface as dopants. We find that the binding energy of the two H atoms near the dissociation site is high on Ti, effectively impeding diffusion away from the Ti site. By contrast, we find that on Ni, the energy barrier for diffusion is much reduced. Therefore, although both Ti and Ni promote H(2) dissociation, only Ni appears to be a good catalyst for Mg hydrogenation, allowing diffusion away from the catalytic sites. Experimental results corroborate these theoretical findings, i.e., faster hydrogenation of the Ni-doped Mg sample as opposed to the reference Mg- or Ti-doped Mg.     

Stepwise Photocatalytic Dissociation of Methanol and Water on TiO(2)(110)

We have investigated the photocatalysis of partially deuterated methanol (CD(3)OH) and H(2)O on TiO(2)(110) at 400 nm using a newly developed photocatalysis apparatus in combination with theoretical calculations. Photocatalyzed products, CD(2)O on Ti(5c) sites, and H and D atoms on bridge-bonded oxygen (BBO) sites from CD(3)OH have been clearly detected, while no evidence of H(2)O photocatalysis was found. The experimental results show that dissociation of CD(3)OH on TiO(2)(110) occurs in a stepwise manner in which the O-H dissociation proceeds first and is then followed by C-D dissociation. Theoretical calculations indicate that the high reverse barrier to C-D recombination and the facile desorption of CD(2)O make photocatalytic methanol dissociation on TiO(2)(110) proceed efficiently. Theoretical results also reveal that the reverse reactions, i.e, O-H recombination after H(2)O photocatalytic dissociation on TiO(2)(110), may occur easily, thus inhibiting efficient photocatalytic water splitting.     

O2 interaction and reactivity on a model hydroxylated rutile(110) surface

Recently several theoretical studies have examined oxygen adsorption on the clean, reduced TiO2(110) surface. However the photocatalytic behavior of TiO2 and the scavenging ability of oxygen are known to be influenced by the presence of surface hydroxyls. In this paper the chemistry of O2 on the hydroxylated TiO2 surface is investigated by means of first-principles total energy calculations and molecular dynamics (MD) simulations. The MD trajectories show a direct, spontaneous reaction between O2 and the surface hydroxyls, thus supporting the experimental hypothesis that the reaction does not necessarily pass through a chemisorbed O2 state. Following this reaction, the most stable chemisorbed intermediates are found to be peroxide species HO2 and H2O2. Although these intermediates are very stable on the short time scale of MD simulations, the energetics suggests that their further transformation is connected to a new 300 K feature observed in the experimental water temperature programmed desorption (TPD) spectrum. The participation of two less stable intermediate states, involving terminal hydroxyls and/or chemisorbed water plus oxygen adatoms, to the desorption process, is not supported by the total energy calculations. Analysis of the projected density of states, however, suggests the possibility that these intermediates have a role in completing the surface oxidation immediately before desorption.     

A first-principles study of molecular oxygen dissociation at an electrode surface: a comparison of potential variation and coadsorption effects

Influences of coadsorbed sodium and water, aqueous solvent, and electrode potential on the kinetics of O(2) dissociation over Pt(111) are systematically investigated using density functional theory models of vacuum and electrochemical interfaces. Na coadsorption alters the electronic states of Pt to stabilize the reactant (O(2)*), transition, and product (2O*) states by facilitating electron donation to oxygen, causing a more exothermic reaction energy (-0.84 eV for Na and O(2), -0.81 eV for isolated O(2)) and a decrease in dissociation barrier (0.39 eV for Na and O(2), 0.57 eV for isolated O(2)). Solvation decreases the reaction energy (-0.67 eV) due to enhanced hydrogen bond stabilization of O(2)* compared to 2O*. The influence of Na is less pronounced at the solvated interface (barrier decreases by only 0.11 eV) because H(2)O screens Na charge-donation. In the electrochemical model system, the dissociation energy becomes more exothermic and the barrier decreases toward more positive potentials. Potential-dependent behavior results from changes in interfacial dipole moment and polarizability between O(2)*, the dissociation transition state, and 2O*; each are influenced by changes in adsorption and hydrogen bonding. Coadsorption of Na in the solvated system dampens the dipole moment change between O(2)* and 2O* and significantly increases the polarizability at the dissociation transition state and for 2O*; the combination causes little change in the reaction energy but reduces the activation barrier by 0.08 eV at 0 V versus NHE. The potential-dependent behavior contrasts that determined at a constant surface charge or from an applied electric field, illustrating the importance of considering the electrochemical potential at the fully-solvated interface in determining reaction energetics, even for non-redox reactions.     

Six-dimensional quasiclassical and quantum dynamics of H2 dissociation on the c(2 × 2)-Ti/Al(100) surface

Based on a slab model of H(2) dissociation on a c(2 × 2) structure with Ti atoms in the first and third layers of Al(100), a six-dimensional (6D) potential energy surface (PES) has been built. In this PES, a molecular adsorption well with a depth of 0.45 eV is present in front of a barrier of height 0.13 eV. Using this PES, H(2) dissociation probabilities are calculated by the classical trajectory (CT), the quasiclassical trajectory (QCT), and the time-dependent wave-packet (TDWP) method. The QCT study shows that trajectories can be trapped by the molecular adsorption well. Higher incident energy can lead to direct H(2) dissociation. Vibrational pre-excitation is the most efficient way to promote direct dissociation without trapping. We find that both rotational and vibrational excitation have efficacies close to 1.0 in the entire range of incident energies investigated, which supports the randomization in the initial conditions making the reaction rate solely dependent on the total (internal and translational) energy. The H(2) dissociation probabilities from quantum dynamics are in reasonable agreement with the QCT results in the energy range 50-200 meV, except for some fluctuations. However, the TDWP results considerably exceed the QCT results in the energy range 200-850 meV. The CT reaction probabilities are too low compared with the quantum dynamical results.     

Chemisorption determines the photovoltage of a Ti/TiO2/Au/dye internal electron emission photovoltaic cell

The Ti/TiO2/Au junction forms the basis of a promising new type of photovoltaic cell, provided that a light-harvesting antenna layer can be deposited on the thin gold film. We report that the electrical diode characteristics of the TiO2/Au Schottky barrier deteriorate by deposition of a hydrophobic quantum dot film, Merbromin dye adsorption, or electron-hole photogeneration in TiO2 under inert conditions. In the presence of oxygen and water vapor, the Schottky barrier characteristics and high photovoltage are recovered. The strong influence of the TiO2 surface chemistry on the (photo)electrical characteristics of the solar cell is discussed on the basis of an existing microscopic model.     

Adsorption and dissociation of NH3 on clean and hydroxylated TiO2 rutile (110) surfaces: a computational study

The adsorption and dissociation of NH(3) on the clean and hydroxylated TiO(2) rutile (110) surfaces have been investigated by the first-principles calculations. The monodentate adsorbates such as H(3)N-Ti(a), H(2)N-Ti(a), N-Ti(a), H(2)N-O(a), HN-O(a), N-O(a) and H-O(a), as well as the bidentate adsorbate, Ti-N-Ti(a) can be formed on the clean surface. It is found that the hydroxyl group enhances the adsorption of certain adsorbates on the five-fold-coordinated Ti atoms (5c-Ti), namely H(2)N-Ti(a), HN-Ti(a), N-Ti(a) and Ti-N-Ti(a). In addition, the adsorption energy increases as the number of hydroxyl groups increases. On the contrary, the opposite effect is found for those on the two-fold-coordinated O atoms (2c-O). The enhanced adsorption of NH(x) (x = 1-2) on the 5c-Ti is due to the large electronegativity of the OH group, increasing the acidity of the Ti center. This also contributes to diminish the adsorption of NH(x) (x = 1-2) on the two-fold-coordinated O atoms (2c-O) decreasing its basicity. According to potential energy profile, the NH(3) dissociation on the TiO(2) surface is endothermic and the hydroxyl group is found to lower the energetics of H(2)N-Ti(a)+H-O(a) and HN-Ti(a)+2{H-O(a)}, but slightly raise the energetic of Ti-N-Ti(a)+3{H-O(a)} compare to those on the clean surface. However, the dissociation of NH(3) is found to occur on the hydroxylated surface with an overall endothermic by 31.8 kcal/mol and requires a barrier of 37.5 kcal/mol. A comparison of NH(3) on anatase surface has been discussed. The detailed electronic analysis is also carried out to gain insights into the interaction nature between adsorbate and surface.     

The mechanism of the water-gas shift reaction on Cu/TiO2(110) elucidated from application of density-functional theory

The Cu/TiO(2)(110) surface displays a great catalytic activity toward the water-gas shift reaction (WGSR), for which Cu is considered to be the most active metal on a TiO(2)(110)-supported surface. Experiments revealed that Cu nanoparticles bind preferentially to the terrace and steps of the TiO(2)(110) surface, which would not only affect the growth mode of the surface cluster but also enhance the catalytic activity, unlike Au nanoparticles for which occupancy of surface vacancies is favored, resulting in poorer catalytic performance than Cu. With density-functional theory we calculated some possible potential-energy surfaces for the carboxyl and redox mechanisms of the WGSR at the interface between the Cu cluster and the TiO(2) support. Our results show that the redox mechanism would be the dominant path; the resident Cu clusters greatly diminish the barrier for CO oxidation (22.49 and 108.68 kJ mol(-1), with and without Cu clusters, respectively). When adsorbed CO is catalytically oxidized by the bridging oxygen of the Cu/TiO(2)(110) surface to form CO(2), the release of CO(2) from the surface would result in the formation of an oxygen vacancy on the surface to facilitate the ensuing water splitting (barrier 34.90 vs. 50.49 kJ mol(-1), with and without the aid of a surface vacancy).     

Dissociative and non-dissociative adsorption dynamics of N2 on Fe(110)

We study the adsorption dynamics of N(2) on the Fe(110) surface. Classical molecular dynamics calculations are performed on top of a six-dimensional potential energy surface calculated within density functional theory. Our results show that N(2) dissociation on this surface is a highly activated process that takes place along a very narrow reaction path with an energy barrier of around 1.1 eV, which explains the measured low reactivity of this system. By incorporating energy exchange with the lattice in the dynamics, we also study the non-dissociative molecular adsorption process. From the analysis of the potential energy surface, we observe the presence of two distinct N(2) adsorption wells. Our dynamics calculations show that the relative population of these adsorption sites varies with the incident energy of the molecule and the surface temperature. We find an activation energy of around 150 meV that prevents molecular adsorption under thermal and hypothermal N(2) gas exposure of the surface. This finding is also consistent with the available experimental information.     

Reactions of ammonia on stoichiometric and reduced TiO(2)(001) single crystal surfaces

The reaction of NH(3) on the surface of the 011-faceted structure of the TiO(2)(001) single crystal is studied and compared to that on the O-defected surface. Temperature-programmed desorption (TPD) conducted after NH(3) adsorption at 300 K shows only molecular desorption at 340 K. Modeling of TPD signals as a function of surface coverage indicated that the activation energy, E(d), and pre-exponential factor, v(eff), decrease with increasing coverage. Near zero surface coverage, E(d) was found to be equal to 92 kJ/mol and v(eff) to be close to 10(13) /s. Both parameters decreased to approximately 52 kJ/mol and approximately 10(7) /s at saturation coverage. The decrease is due to a repulsive interaction of adsorbed NH(3) molecules on the surface. Computing of the TPD results show that saturation is obtained at 1/2 monolayer coverage (referred to Ti atoms). Both the amount and shape of NH(3) peak change on the reduced (Ar(+)-sputtered) surfaces. The desorption peak at 340 K is considerably attenuated on mildly reduced surfaces (TiO( approximately )(1.9)) and has totally disappeared on the heavily reduced surfaces (TiO(1.6)(-)(1.7)), where the main desorption peak is found at 440 K. This 440-K desorption is most likely due to NH(x) + H recombination resulting from ammonia dissociation upon adsorption on Ti atoms in low oxidation states.     

Characterizing TiO2(110) surface states by their work function

The unreconstructed TiO(2)(110) surface is prepared in well-defined states having different characteristic stoichiometries, namely reduced (r-TiO(2), 6 to 9% surface vacancies), hydroxylated (h-TiO(2), vacancies filled with OH), oxygen covered (ox-TiO(2), oxygen adatoms on a stoichiometric surface) and quasi-stoichiometric (qs-TiO(2), a stoichiometric surface with very few defects). The electronic structure and work function of these surfaces and transition states between them are investigated by ultraviolet photoelectron spectroscopy (UPS) and metastable impact electron spectroscopy (MIES). The character of the surface is associated with a specific value of the work function that varies from 4.9 eV for h-TiO(2), 5.2 eV for r-TiO(2), 5.35 eV for ox-TiO(2) to 5.5 eV for qs-TiO(2). We establish the method for an unambiguous characterization of TiO(2)(110) surface states solely based on the secondary electron emission characteristics. This is facilitated by analysing a weak electron emission below the nominal work function energy. The emission in the low energy cut-off region appears correlated with band gap emission found in UPS spectra and is attributed to localised electron emission through Ti(3+)(3d) states.     

Site-dependent electron-stimulated reactions in water films on TiO2(110)

Electron-stimulated reactions in thin [<3 ML (monolayer)] water films adsorbed on TiO(2)(110) are investigated. Irradiation with 100 eV electrons results in electron-stimulated dissociation and electron-stimulated desorption (ESD) of adsorbed water molecules. The molecular water ESD yield increases linearly with water coverage theta for 0< or =theta< or =1 ML and 11 ML, the water ESD yield per additional water molecule adsorbed (i.e., the slope of the ESD yield versus coverage) is 3.5 times larger than for theta<1 ML. In contrast, the number of water molecules dissociated per incident electron increases linearly for theta< or =2 ML without changing slope at theta=1 ML. The total electron-stimulated sputtering rate, as measured by postirradiation temperature programmed desorption of the remaining water, is larger for theta>1 ML due to the increased water ESD for those coverages. The water ESD yields versus electron energy (for 5-50 eV) are qualitatively similar for 1, 2, and 40 ML water films. In each case, the observed ESD threshold is at approximately 10 eV and the yield increases monotonically with increasing electron energy. The results indicate that excitations in the adsorbed water layer are primarily responsible for the ESD in thin water films on TiO(2)(110). Experiments on "isotopically layered" films with D(2)O adsorbed on the Ti(4+) sites (D(2)O(Ti)) and H(2)O adsorbed on the bridging oxygen atoms (H(2)O(BBO)) demonstrate that increasing the water coverage above 1 ML rapidly suppresses the electron-stimulated desorption of D(2)O(Ti) and D atoms, despite the fact that the total water ESD and atomic hydrogen ESD yields increase with increasing coverage. The coverage dependence of the electron-stimulated reactions is probably related to the different bonding geometries for H(2)O(Ti) and H(2)O(BBO) and its influence on the desorption probability of the reaction products.