Optimal surface functionalization of silicon quantum dots

Surface functionalization is a critical step for Si nanocrystals being used as biological probes and sensors. Using density-functional tight-binding calculations, we systematically investigate the optical properties of silicon quantum dots (SiQDs) with various termination groups, including H, CH(3), NH(2), SH, and OH. Our calculations reveal that capping SiQDs with alkyl group (-Si-C-) induces minimal changes in the optical spectra, while covering the surface with NH(2), SH, and OH results in evident changes compared to hydrogenated SiQDs. The structural deformations and electronic property changes due to surface passivation were shown to be responsible for the above-described features. Interestingly, we find that the optical properties of SiQDs can be controlled by varying the S coverage on the surface. This tuning effect may have important implications in device fabrications.     

False multiple exciton recombination and multiple exciton generation signals in semiconductor quantum dots arise from surface charge trapping

Multiple exciton recombination (MER) and multiple exciton generation (MEG) are two of the main processes for assessing the usefulness of quantum dots (QDs) in photovoltaic devices. Recent experiments, however, have shown that a firm understanding of both processes is far from well established. By performing surface-dependent measurements on colloidal CdSe QDs, we find that surface-induced charge trapping processes lead to false MER and MEG signals resulting in an inaccurate measurement of these processes. Our results show that surface-induced processes create a significant contribution to the observed discrepancies in both MER and MEG experiments. Spectral signatures in the transient absorption signals reveal the physical origin of these false signals.     

Photoluminescence of cadmium selenide quantum dots in polymer solutions

The effect of solvent on the photoluminescence of cadmium selenide quantum dots stabilized by oleic acid is examined with the example of two organic solvents: toluene and THF. It is found that THF favors desorption of ligands and formation of surface defects to a greater extent than toluene; as a result, the maximum of the photoluminescence band shifts to the red spectral region and its intensity decreases. The addition of polymers to the solution of quantum dots causes changes in the efficiency of photoluminescence and in the kinetics of its quenching. In the range of low concentrations (≤2 wt %) of quantum dots in polymer solutions, the intensity of luminescence first grows and then passes through a maximum and decreases. This effect may be explained both by the increasing number of surface defects and by quenching via energy transfer to polymers, especially in the case of polymers containing aromatic groups.     

Semiconducting thin films of zinc selenide quantum dots

A novel chemical route for deposition of zinc selenide quantum dots in thin film form is developed. The deposited films are characterized with very high purity in crystallographic sense, and behave as typical intrinsic semiconductors. Evolution of the average crystal size, lattice constant, lattice strain and the optical properties of the films upon thermal treatment is followed and discussed. The band gap energy of as-deposited ZnSe films is blue-shifted by ≈0.50 eV with respect to the bulk value, while upon annealing treatment it converges to 2.58 eV. Two discrete electronic states which originate from the bulk valence band are observed in the UV-VIS spectra of ZnSe 3D quantum dots deposited in thin film form via allowed electronic transitions to the 1S electronic state arising from the bulk conduction band—appearing at 3.10 and 3.50 eV. The splitting between these two states is approximately equal to the spin-orbit splitting in the case of bulk ZnSe. The electronic transitions in the case of non-quantized annealed films are discussed in terms of the direct allowed band-to-band transitions with the spin-orbit splitting of the valence band of 0.40 eV. The effective mass approximation model (i.e., the Brus model) with the static relative dielectric constant of bulk ZnSe fails to predict correctly the size dependence of the band gap energy, while only a slight improvement is obtained when the hyperbolic band model is applied. However, when substantially smaller value for ε_r (2.0 instead of 8.1) is used in the Brus model, an excellent agreement with the experimental data is obtained, which supports some earlier indications that the quantum dots ε_r value could be significantly smaller than the bulk material value. The ionization energy of a deep donor impurity level calculated on the basis of the temperature dependence of the film resistivity is 0.82 eV at 0 K.     

Tight confinement of semiconductor quantum dots within zeolite by surface silylation

Various MX (M = Cd, Zn, and Mn, X = S and Se) semiconductor quantum dots (QDs) were prepared in zeolite Y. While the QDs are readily expelled from zeolite interior upon exposure of the MX QD-incorporating zeolite Y ([MX]-Y) to the ambient atmosphere due to moisture adsorption, they remain tightly confined within zeolites even after exposure to the moist atmosphere for several weeks when the surfaces were silylated with various silylating agents. This methodology will facilitate the characterization of the zeolite-encapsulated QDs and the application of QD-incorporating zeolites.     

Computational studies of semiconductor quantum dots

Light-absorption and luminescence processes in nano-sized materials can be modelled either by using computational approaches developed for quantum chemical calculations or by applying computational methods in the effective mass approximation (EMA) originally intended for solid-state theory studies. An overview of the theory and implementation of an ab initio correlation EMA method for studies of luminescence properties of embedded semiconductor quantum dots is presented. The applicability of the method and the importance of correlation effects are demonstrated by calculations on InGaAs/GaAs quantum-dot and quantum-ring samples. Ab initio and density functional theory (DFT) quantum chemical studies of optical transitions in freestanding silicon nanoclusters are also discussed. The accuracy of the optical gaps and oscillator strengths for silicon nanoclusters obtained using different computational methods is addressed. Changes in the cluster structures, excitation energies and band strengths upon excitation are reported. The role of the surface termination and functional groups on the silicon nanocluster surfaces is discussed.     

Efficient surface grafting of luminescent silicon quantum dots by photoinitiated hydrosilylation

We suggest a method for efficient (high-coverage) grafting of organic molecules onto photoluminescent silicon nanoparticles. High coverage grafting was enabled by use of a modified etching process that produces a hydrogen-terminated surface on the nanoparticles with very little residual oxygen and by carefully excluding oxygen during the grafting process. It had not previously been possible to produce such a clean H-terminated surface on free silicon nanoparticles or, subsequently, to produce grafted particles without significant surface oxygen. This allowed us to (1) prepare air-stable green-emitting silicon nanoparticles, (2) prepare stable dispersions of grafted silicon nanoparticles in a variety of organic solvents from which particles can readily be precipitated by addition of nonsolvent, dried, and redispersed, (3) separate these nanoparticles by size (and therefore emission color) using conventional chromatographic methods, (4) protect the particles from chemical attack and photoluminescence quenching, and (5) provide functional groups on the particle surface for further derivatization. We also show, using 1H NMR, that the photoinitiated hydrosilylation reaction does not specifically graft the terminal carbon atom to the surface but that attachment at both the first and second atom occurs.     

Advances in green colloidal synthesis of metal selenide and telluride quantum dots

This review summarized the green approaches toward colloidal chemical synthesis for metal selenide and telluride quantum dots.     

Photoluminescence of nanocomposites of liquid-crystalline polymers and cadmium selenide quantum dots

The role of specific interactions between a polymer matrix and incorporated quantum dots is one of the critical problems for understanding the effect of the polymer matrix on the optical properties of quantum dots in a nanocomposite material and for creating new photonic materials and related instruments. In this study, cadmium selenide quantum dots have been incorporated into a liquid-crystalline polymer via the interaction of carboxyl groups of the polymer with the quantum-dot surfaces through ionic bonds. From the data of transmission electron microscopy, it has been shown that this interaction provides the localization of quantum dots in the environment of the liquid-crystalline phase of the polymer. Various features of photoluminescent properties have been observed and interpreted in terms of the emission recombination of excitons in CdSe quantum dots, light reabsorption by quantum dots, the effect of the electronic states on the surface CdSe-liquid crystal, and the energy transfer from quantum dots to the polymer liquid-crystalline matrix.     

Theory of alkyl-terminated silicon quantum dots

We have carried out a series of ab initio calculations to investigate changes in the optical properties of Si quantum dots as a function of surface passivation. In particular, we have compared hydrogen-passivated dots with those having alkyl groups at the surface. We find that, while on clusters with reconstructed surfaces complete alkyl passivation is possible, steric repulsion prevents full passivation of Si dots with unreconstructed surfaces. In addition, our calculations show that steric repulsion may have a dominant effect in determining the surface structure and eventually the stability of alkyl-passivated clusters, with results dependent on the length of the carbon chain. Alkyl passivation weakly affects optical gaps of silicon quantum dots, while it substantially decreases ionization potentials and electron affinities and affects their excited state properties. On the basis of our results, we propose that alkyl-terminated quantum dots may be size selected, taking advantage of the change in ionization potential as a function of the cluster size.     

Cellular internalization and targeting of semiconductor quantum dots

Peptide-mediated internalization and organelle targeting of quantum dots.     

Photoinduced hole trapping in single semiconductor quantum dots at specific sites at silicon oxide interfaces

Blinking dynamics of CdSe/ZnS semiconductor quantum dots (QD) are characterized by (truncated) power law distributions exhibiting a wide dynamic range in probability densities and time scales both for off- and on-times. QDs were immobilized on silicon oxide surfaces with varying grades of hydroxylation and silanol group densities, respectively. While the off-time distributions remain unaffected by changing the surface properties of the silicon oxide, a deviation from the power law dependence is observed in the case of on-times. This deviation can be described by a superimposed single exponential function and depends critically on the local silanol group density. Furthermore, QDs in close proximity to silanol groups exhibit both high average photoluminescence intensities and large on-time fractions. The effect is attributed to an interaction between the QDs and the silanol groups which creates new or deepens already existing hole trap states within the ZnS shell. This interpretation is consistent with the trapping model introduced by Verberk et al. (R. Verberk, A. M. van Oijen and M. Orrit, Phys. Rev. B, 2002, 66, 233202).     

Fabrication of composite materials from semiconductor quantum dots and organic polymers for optoelectronics and biomedicine: role of surface ligands

Recent advances in the fields of application of the composites based on quantum dots (QDs) as optical converters for the light emitting devices, solar cells and biofunctional nanoprobes for detection of markers and medical diagnostics are considered. The possibilities of application of various QD—ligand—polymer combinations depending on desired photophysical properties in the final composite are analyzed. An attempt is made to predict the key future trends in the fabrication and application of hybrid nanocomposites for biomedicine and optoelectronics.     

Mechanisms of fluorescence blinking in semiconductor nanocrystal quantum dots

The light-induced spectral diffusion and fluorescence intermittency (blinking) of semiconductor nanocrystal quantum dots are investigated theoretically using a diffusion-controlled electron-transfer (DCET) model, where a light-induced one-dimensional diffusion process in energy space is considered. Unlike the conventional electron-transfer reactions with simple exponential kinetics, the model naturally leads to a power-law statistics for the intermittency. We formulate a possible explanation for the spectral broadening and its proportionality to the light energy density, the -32 power law for the blinking statistics of the fluorescence intermittency, the breakdown of the power-law behavior with a bending tail for the "light" periods, a lack of bending tail for the "dark" periods (but would eventually appear at later times), and the dependence of the bending tail on light intensity and temperature. This DCET model predicts a critical time t(c) (a function of the electronic coupling strength and other quantities), such that for times shorter than t(c) the exponent for the power law is -12 instead of -32. Quantitative analyses are made of the experimental data on spectral diffusion and on the asymmetric blinking statistics for the "on" and "off" events. Causes for deviation of the exponent from the ideal value of -32 are also discussed. Several fundamental properties are determined from the present experimental data, the diffusion correlation time, the Stokes shift, and a combination of other molecular-based quantities. Specific experiments are suggested to test the model further, extract other molecular properties, and elucidate more details of the light-induced charge-transfer dynamics in quantum dots.     

Synthesis,characterizations, and optical properties of copper selenide quantum dots

We demonstrate the synthesis of copper selenide quantum dots (QDs) by element directed, inexpensive, straight forward wet chemical method which is free from any surfactant or template. Copper selenide QDs have been synthesized by elemental copper and selenium in the presence of ethylene glycol, hydrazine hydrate, and a defined amount of water at 70 °C within 8 h. The product is in strong quantum confinement regime, phase analysis, purity and morphology of the product has been well studied by X-ray diffraction (XRD), UV–Visible spectroscopy (UV–Vis), Photo-luminescent spectroscopy (PL), Fourier transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), High resolution transmission electron microscopy (HRTEM), and by Atomic force microscopy (AFM) techniques. The absorption and photoluminescence studies display large “blue shift”. TEM and HRTEM analyses revealed that the QDs diameters are in the range 2–5 nm. Due to the quantum confinement effect copper selenide QDs could be potential building blocks to construct functional devices and solar cell. The possible mechanism is also discussed.     

Computer simulation of ligand shells of colloidal cadmium selenide quantum dots

The full-atomic molecular dynamics approach has been employed to study the structure and composition of ligand shells of colloidal cadmium selenide quantum dots produced by high-temperature colloidal synthesis in a trioctylphosphine–trioctylphosphine oxide mixture. The influence of solvents (chloroform and methanol) on the composition of the shells has been investigated. The number of ligand molecules optimal for complete covering the surface of a considered particle without its deformation has been found. The fraction of passivated surface ions has been calculated.     

Nanoassemblies designed from semiconductor quantum dots and molecular arrays

The formation of nanoassemblies of CdSe/ZnS quantum dots (QD) and pyridyl-substituted free-base porphyrin (H(2)P) molecules has been spectroscopically identified by static and time-resolved techniques. The formation of nanoassemblies has been engineered by controlling the type and geometry of the H(2)P molecules. Pyridyl functionalization gives rise to a strong complex formation accompanied by QD photoluminescence (PL) quenching. For some of the systems, this quenching is partly related to fluorescence resonance energy transfer (FRET) from the QD to H(2)P and can be explained according to the F?rster model. The quantitative interpretation of PL quenching due to complexation reveals that (i) on average only about (1)/(5) of the H(2)P molecules at a given H(2)P/QD molar ratio are assembled on the QD and (ii) only a limited number of "vacancies" accessible for H(2)P attachment exist on the QD surface.     

Synthesis and electronic properties of semiconductor nanoparticles/quantum dots

This review examines recent work on the synthesis, characterisation and potential applications of semiconductor nanoparticles (quantum dots). Recent advances in single quatum dot spectroscopy is also reviewed.     

硅量子点合成方法的研究进展

与传统的Ⅱ-Ⅵ族和Ⅲ-Ⅴ族半导体化合物相比,硅量子点性质独特,不仅无毒无害、环境友好,而且储量丰富,可以大量生产,目前已在光电子学、太阳能转换、生物传感器、荧光探针等方面具有广泛的应用.本文作者对液相合成方法、高温气相还原法和热分解法制备硅量子点进行了综述,并对硅量子点在光电器件领域的应用前景进行了展望.     

Green chemistry for large-scale synthesis of semiconductor quantum dots

Large-scale synthesis of semiconductor nanocrystals or quantum dots (QDs) with high concentration and high yield through simultaneously increasing the precursor concentration was introduced. This synthetic route conducted in diesel has produced gram-scale CdSe semiconductor quantum dots (In optimal scale-up synthetic condition, the one-pot yield of QDs is up to 9.6g). The reaction has been conducted in open air and at relatively low temperature at 190-230 degrees C in the absence of expensive organic phosphine ligands, aliphatic amine and octadecene, which is really green chemistry without high energy cost for high temperature reaction and unessential toxic chemicals except for Cd, which is the essential building block for QDs.