Theory of polyelectrolyte adsorption onto surfaces patterned with charge and topography

Mean-field theory is used to derive criteria for the adsorption of a weakly charged polyelectrolyte molecule from salt solution onto surfaces patterned with charge and topography. For flat surfaces patterned with periodic arrays of charged patches, the adsorbed layer thickness predicted using mean-field theory and that found by Brownian dynamics simulations are in quantitative agreement in the strong-adsorption regime, which corresponds to sufficiently small kappa or sufficiently large |sigma(eff)q|, where kappa is the inverse Debye screening length, sigma(eff) is an effective surface charge density, and q is the charge on each segment of the polyelectrolyte. Qualitative agreement is obtained in the weak-adsorption regime, and for the case where surfaces are patterned with both charge and topography. For uniformly charged, sinusoidally corrugated surfaces, the theory predicts that the critical temperature required for adsorption can be greater than or less than the corresponding value for a flat surface depending on the relative values of kappa and the corrugation wave number. If the surface charge is also allowed to vary sinusoidally, then adsorption is predicted to occur only when the topography crests have a surface charge opposite to that of the polyelectrolyte. Surfaces patterned with rectangular indentations having charged bottoms which are separated by flat charged plateaus are investigated as well. Adsorption is predicted to occur even when the net surface charge is zero, provided that the plateaus have a charge opposite to that of the polyelectrolyte. If the charge on the plateaus and polyelectrolyte is the same, adsorption may still occur if electrostatic attraction from the indentation bottoms is sufficiently strong.     

Entropy and enthalpy of polyelectrolyte complexation: Langevin dynamics simulations

We report a systematic study by Langevin dynamics simulation on the energetics of complexation between two oppositely charged polyelectrolytes of same charge density in dilute solutions of a good solvent with counterions and salt ions explicitly included. The enthalpy of polyelectrolyte complexation is quantified by comparisons of the Coulomb energy before and after complexation. The entropy of polyelectrolyte complexation is determined directly from simulations and compared with that from a mean-field lattice model explicitly accounting for counterion adsorption. At weak Coulomb interaction strengths, e.g., in solvents of high dielectric constant or with weakly charged polyelectrolytes, complexation is driven by a negative enthalpy due to electrostatic attraction between two oppositely charged chains, with counterion release entropy playing only a subsidiary role. In the strong interaction regime, complexation is driven by a large counterion release entropy and opposed by a positive enthalpy change. The addition of salt reduces the enthalpy of polyelectrolyte complexation by screening electrostatic interaction at all Coulomb interaction strengths. The counterion release entropy also decreases in the presence of salt, but the reduction only becomes significant at higher Coulomb interaction strengths. More significantly, in the range of Coulomb interaction strengths appropriate for highly charged polymers in aqueous solutions, complexation enthalpy depends weakly on salt concentration and counterion release entropy exhibits a large variation as a function of salt concentration. Our study quantitatively establishes that polyelectrolyte complexation in highly charged Coulomb systems is of entropic origin.     

On the theory of polyelectrolyte adsorption : The effect on adsorption behavior of the electrostatic contribution to the adsorption free energy

A theory has been developed for the adsorption of polyelectrolytes on charged interfaces from an aqueous salt solution. This adsorption is determined by the electrical charge density of the polyelectrolyte, the adsorption energy, the salt concentration, the molecular weight, solubility, flexibility, and concentration of polymer. The theory relates these parameters to the properties of the adsorbed polymer layer, i.e., the amount of polymer adsorbed, the fraction of the adsorbent interface covered, the fraction of the segments actually adsorbed on the interface versus the fraction of the segments in the dangling loops, the final surface charge density, and the thickness of the adsorbed layer. As polyelectrolyte adsorption should resemble nonionic polymer adsorption at high ionic strength of the solution or low charge density on the polymer, this work is an extension of the nonionic polymer adsorption theory to polyelectrolyte adsorption. The following effects are taken into account: (a) the conformational change upon adsorption of a coil in solution into a sequence of adsorbed trains interconnected by loops dangling in solution; (b) the interactions of the adsorbed trains with the interface and with each other; (c) the interaction of the dangling loops with the solvent; (d) the change in surface charge density of the adsorbent due to adsorption of charged trains and the accompanying changes in the electrical double layer which contains “small” ions as well as charged loops; (e) the (induced) dipole interaction of the adsorbed trains with the charged adsorbent interface. The theory is worked out for low potentials (Debye—Hückel approximation); in Appendix B an outline of a more complete treatment is given. The predicted adsorption isotherms have the experimentally observed high-affinity character. A relation between the adsorption energy, the surface charge density on the adsorbent, the degree of dissociation of the polymer, and the salt concentration predicts the conditions under which no adsorption will occur. For adsorbent and polymer carrying the same type of charge (both positive or both negative) the adsorption is predicted to decrease with increased charge density on polymer or adsorbent and to increase with salt concentration. If adsorbent and polymer carry different type charges, the adsorption as a function of the degree of dissociation, α, goes through a maximum at a relatively low value of α and, depending on the adsorption energy, an increase in the salt concentration can then increase or decrease the adsorption. At finite polymer concentration in solution the number of adsorbed segments and the fraction of the interface covered practically do not change with an increase in polymer concentration, whereas the total number of polymer molecules adsorbed increases slightly, as does the average fraction of segments in loops. The experimental results for polyelectrolyte adsorption have been reviewed in general and, as far as data are available, the predictions of the theory seem to follow the experimentally observed trends quite closely, except for the thickness of the adsorbed layer. This thickness is systematically overestimated by the theory and two reasons for this are given. The theoretical model implies a not too low ionic strength of the solution. Extrapolation of results to solutions of very low ionic strength is not warranted.     

Theory of competitive counterion adsorption on flexible polyelectrolytes: divalent salts

The counterion distribution around an isolated flexible polyelectrolyte in the presence of a divalent salt is evaluated using the adsorption model [M. Muthukumar, J. Chem. Phys. 120, 9343 (2004)] that considers the Bjerrum length, salt concentration, and local dielectric heterogeneity as physical variables in the system. Self-consistent calculations of effective charge and size of the polymer show that divalent counterions replace condensed monovalent counterions in competitive adsorption. The theory further predicts that at modest physical conditions for a flexible polyelectrolytes such as sodium polystyrene sulfonate in aqueous solutions polymer charge is compensated and reversed with increasing divalent salt. Consequently, the polyelectrolyte shrinks and reswells. Lower temperatures and higher degrees of dielectric heterogeneity between chain backbone and solvent enhance condensation of all species of ions. Complete diagrams of states for the effective charge calculated as functions of the Coulomb strength and salt concentration suggest that (a) overcharging requires a minimum Coulomb strength and (b) progressively higher presence of salt recharges the polymer due to either electrostatic screening (for low Coulomb strengths) or coion condensation (for high Coulomb strengths). Consideration of ion-bridging by divalent counterions leads to a first-order collapse of polyelectrolytes in modest presence of divalent salts and at higher Coulomb strengths. The authors' theoretical predictions are in agreement with the generic results from experiments and simulations.     

Brownian dynamics simulations of polyelectrolyte adsorption onto charged patterned surfaces

The adsorption of single polyelectrolyte molecules onto surfaces decorated with periodic arrays of charged patches was studied using Brownian dynamics simulations. A free-draining, freely jointed bead-rod chain was used to model the polyelectrolyte, and electrostatic interactions were incorporated using a screened Coulombic potential with the excluded volume accounted for by a hard-sphere potential. The simulations predicted that the polyelectrolyte lies close to the adsorbing surface if the patch length, surface charge density, and screening length are sufficiently large. Chain conformations were found to be very sensitive to patch length, patch spacing, and the nature of the charge on adjacent patches. This is due both to the size of the polymer relative to patch length and spacing and to the structure of the electric field near the surface. In some cases, the component of the radius of gyration parallel to the surface can be made smaller than its free-solution value, which is contrary to what is observed for a uniformly charged surface. Isolated charged patches were also considered, and significant adsorption was observed above a critical surface charge density. The results demonstrate how polyelectrolyte conformations can be controlled by the design of the charged patches and may be useful for applications in which adsorbed polyelectrolyte films play a key role.     

Monte Carlo simulation and molecular theory of tethered polyelectrolytes

We investigate the structure of end-tethered polyelectrolytes using Monte Carlo simulations and molecular theory. In the Monte Carlo calculations we explicitly take into account counterions and polymer configurations and calculate electrostatic interaction using Ewald summation. Rosenbluth biasing, distance biasing, and the use of a lattice are all used to speed up Monte Carlo calculation, enabling the efficient simulation of the polyelectrolyte layer. The molecular theory explicitly incorporates the chain conformations and the possibility of counterion condensation. Using both Monte Carlo simulation and theory, we examine the effect of grafting density, surface charge density, charge strength, and polymer chain length on the distribution of the polyelectrolyte monomers and counterions. For all grafting densities examined, a sharp decrease in brush height is observed in the strongly charged regime using both Monte Carlo simulation and theory. The decrease in layer thickness is due to counterion condensation within the layer. The height of the polymer layer increases slightly upon charging the grafting surface. The molecular theory describes the structure of the polyelectrolyte layer well in all the different regimes that we have studied.     

Molecular dynamics simulations of multilayer polyelectrolyte films: effect of electrostatic and short-range interactions

The effect of the strength of electrostatic and short-range interactions on the multilayer assembly of oppositely charged polyelectrolytes at a charged substrate was studied by molecular dynamics simulations. The multilayer buildup was achieved through sequential adsorption of charged polymers in a layer-by-layer fashion from dilute polyelectrolyte solutions. The strong electrostatic attraction between oppositely charged polyelectrolytes at each deposition step is a driving force behind the multilayer growth. Our simulations have shown that a charge reversal after each deposition step is critical for steady multilayer growth and that there is a linear increase in polymer surface coverage after the first few deposition steps. Furthermore, there is substantial intermixing between chains adsorbed during different deposition steps. We show that the polymer surface coverage and multilayer structure are each strongly influenced by the strength of electrostatic and short-range interactions.     

Simple model for DNA adsorption onto a mica surface in 1:1 and 2:1 electrolyte solutions

We propose a simple theory of interactions between like-charged polyelectrolyte and a surface based on a mean-field Derjaguin-Landau-Verwey-Overbeek approach. It predicts that the van der Waals attractive interactions are responsible for irreversible physisorption of polyelectrolytes onto charged surfaces. We show that monovalent salts contribute significantly to repulsive interactions, while enhancing the attraction very slightly. The effect of the divalent counterions is reverse. Therefore, to achieve the adsorption, the overall repulsion due to 1:1 electrolyte should be counterbalanced by the stronger van der Waals attraction due to the presence of doubly charged counterions in solution. The theory has been validated experimentally against its ability to predict the minimum polymer/surface interaction energy required for the adsorption using DNA/mica in NaCl, MgCl2, and NiCl2 solutions as a test system. The theory explains the mechanism of linear DNA adsorption to a mica surface for different solvent compositions and can be used as a tool for predicting the optimum conditions for AFM experiments on linear polymer systems. The model can also be used to make general conclusions on the conformation of polymer molecules on a surface. We have shown for the DNA/mica surface system that when the adsorption of DNA is mostly governed by long-range van der Waals forces the molecule adopts an ideal 2D conformation. When the adsorption is mostly due to short-range ion-correlation forces, DNA will appear 3D --> 2D projected in agreement with experimental data.     

Theory of volume transition in polyelectrolyte gels with charge regularization

We present a theory for polyelectrolyte gels that allow the effective charge of the polymer backbone to self-regulate. Using a variational approach, we obtain an expression for the free energy of gels that accounts for the gel elasticity, free energy of mixing, counterion adsorption, local dielectric constant, electrostatic interaction among polymer segments, electrolyte ion correlations, and self-consistent charge regularization on the polymer strands. This free energy is then minimized to predict the behavior of the system as characterized by the gel volume fraction as a function of external variables such as temperature and salt concentration. We present results for the volume transition of polyelectrolyte gels in salt-free solvents, solvents with monovalent salts, and solvents with divalent salts. The results of our theoretical analysis capture the essential features of existing experimental results and also provide predictions for further experimentation. Our analysis highlights the importance of the self-regularization of the effective charge for the volume transition of gels in particular, and for charged polymer systems in general. Our analysis also enables us to identify the dominant free energy contributions for charged polymer networks and provides a framework for further investigation of specific experimental systems.     

Adsorption of branched-linear polyethyleneimine-ethylene oxide conjugate on hydrophilic silica investigated by ellipsometry and Monte Carlo simulations

The adsorption of and conformation adopted by a branched-linear polymer conjugate to the hydrophilic silica-aqueous solution interface have been studied by in situ null ellipsometry and Monte Carlo simulations. The conjugate is a highly branched polyethyleneimine structure with ethyleneoxide chains grafted to its primary and secondary amino groups. In situ null ellipsometry demonstrated that the polymer conjugate adsorbs to the silica surface from water and aqueous solution of 1 mM asymmetric divalent salt (calcium and magnesium chloride to emulate hard water) over a large pH range. The adsorbed amount is hardly affected by pH and large charge reversal on the negatively charged silica surface occurred at pH = 4.0, due to the adsorption of the cationic polyelectrolyte. The Monte Carlo simulations using an appropriate coarse-grained model of the polymer in solution predicted a core-shell structure with no sharp boundary between the ethyleneimine and ethyleneoxide moieties. The structure at the interface is similar to that in solution when the polymer degree of protonation is low or moderate while at high degree of protonation the strong electrostatic attraction between the ethyleneimine core and oppositely charged silica surface distorts the ethyleneoxide shell so that an "anemone"-like configuration is adopted. The adsorption of alkyl benzene sulfonic acid (LAS) to a preadsorbed polymer layer was also investigated by null ellipsometry. The adsorption data brought additional support for the existence of a strong polymer adsorption and showed the presence of a binding which was further enhanced by the decreased solvency of the surfactant in the salt solution and confirmed the surface charge reversal by the polymer adsorption at pH = 4.0.     

Molecular dynamics simulations of layer-by-layer assembly of polyelectrolytes at charged surfaces: effects of chain degree of polymerization and fraction of charged monomers

We performed molecular dynamics simulations of the electrostatic assembly of multilayers of flexible polyelectrolytes at a charged surface. The multilayer build-up was achieved through sequential adsorption of oppositely charged polymers in a layer-by-layer fashion from dilute polyelectrolyte solutions. The steady-state multilayer growth proceeds through a charge reversal of the adsorbed polymeric film which leads to a linear increase in the polymer surface coverage after completion of the first few deposition steps. Moreover, substantial intermixing between chains adsorbed during different deposition steps is observed. This intermixing is consistent with the observed requirement for several deposition steps to transpire for completion of a single layer. However, despite chain intermixing, there are almost perfect periodic oscillations of the density difference between monomers belonging to positively and negatively charged macromolecules in the adsorbed film. Weakly charged chains show higher polymer surface coverage than strongly charged ones.     

Polyelectrolyte adsorption kinetics under an applied electric potential: Strongly versus weakly charged polymers

Previous work has demonstrated adsorption of weakly basic polycations to a conducting substrate to be continuous, i.e. asymptotically linear in time over hours, under an applied anodic potential [A.P. Ngankam, P.R. Van Tassel, Proc. Natl. Acad. Sci. USA 104 (2007) 1140]. Adsorption without apparent saturation requires an interfacial charge regulation, which is possible for weakly charged polymers via segment deprotonation. We investigate here whether deprotonation is a necessary condition for continuous adsorption by comparing the behavior of a weakly and a strongly charged polyelectrolyte, the latter containing permanently charged segments incapable of deprotonation. We employ optical waveguide lightmode spectroscopy (OWLS) to measure adsorption of poly(N-vinyl imidazole) (PVI), a weakly basic polycation, and quaternized poly(N-vinyl imidazole) (QPVI), a structurally similar polymer with ca. 20% of its monomers containing a permanent positive charge, onto indium tin oxide (ITO). Under open circuit conditions, we observe both PVI and QPVI adsorption to reach a rapid saturation and be essentially irreversible. In contrast, at an ITO potential of 1.5 V (versus hydrogen) in a 0.1 M NaCl solution, we observe adsorption of both PVI and QPVI to be continuous and reversible. In salt free solution, we observe PVI but not QPVI to exhibit continuous adsorption at 1.5 V, and for both polymers to be essentially irreversibly attached. We propose interfacial charge regulation to occur via a deprotonation mechanism for PVI, and via a counterion condensation mechanism for QPVI. Continuous adsorption is therefore possible for a strongly charged polyelectrolyte, via a counterion condensation mechanism; this finding opens the door to nanofilms of controlled polymer content containing permanent charges.     

Increased layer interdiffusion in polyelectrolyte films upon annealing in water and aqueous salt solutions

As-deposited films of multilayered polyelectrolytes are considered to be non-equilibrium structures. Due to the strong attraction between oppositely charged polyions, polyelectrolyte interdiffusion is thought to be suppressed during the adsorption process. Equilibration is promoted by a decrease of the electrostatic attraction between polyion pairs. We have used neutral impact collision ion scattering spectroscopy to investigate the influence of polyelectrolyte multilayer annealing in water and aqueous 1 M NaCl solutions at different temperatures (20 and 70 degrees C) on the increase in interpenetration of a single polyelectrolyte layer throughout the whole film. The multilayers were composed of poly(4-vinylpyridinium) and poly(4-styrenesulfonate). Contrast between neighboring layers was established by labelling the layer in question with the heavy atom ruthenium. It is found that both temperature and salt increase layer interpenetration, whereas salt has a stronger influence than temperature. From numerical simulations polyelectrolyte diffusion coefficients were evaluated for the different annealing conditions. The influence of temperature and salt on the equilibration of the film is interpreted in terms of increased screening of polyion charges and binding of small counterions to polyion monomeric units.     

Simulation Study of the Conformational Properties of Diblock Polyelectrolytes in Salt Solutions

Coarse-grained molecular dynamics simulations are performed to understand the behavior of diblock polyelectrolytes in solutions of divalent salt by studying the conformations of chains over a wide range of salt concentrations. The polymer molecules are modeled as bead spring chains with different charged fractions and the counterions and salt ions are incorporated explicitly. Upon addition of a divalent salt, the salt cations replace the monovalent counterions, and the condensation of divalent salt cations onto the polyelectrolyte increases, and the chains favor to collapse. The condensation of ions changes with the salt concentration and depends on the charged fraction. Also, the degree of collapse at a given salt concentration changes with the increasing valency of the counterion due to the bridging effect. As a quantitative measure of the distribution of counterions around the polyelectrolyte chain, we study the radial distribution function between monomers on different polyelectrolytes and the counterions inside the counterion worm surrounding a polymer chain at different concentrations of the divalent salt. Our simulation results show a strong dependence of salt concentration on the conformational properties of diblock copolymers and indicate that it can tune the self-assembly behaviors of such charged polyelectrolyte block copolymers.     

Influence of polyelectrolyte and salt on the structure of dispersions containing charged colloidal particles

An integral equation theory has been used as the basis for studying the structure of dispersions containing charged colloidal particles: globular protein molecules with a nonzero dipole moment, a polyelectrolyte and a low-molecular salt. It is demonstrated that there is an effective attraction between charged colloidal particles, which increases in the presence of charged polymer chains. The influence of the length of polyelectrolyte chains and of salt concentration on the partial structure factor of colloidal particles was studied.     

Surface properties of bottle-brush polyelectrolytes on mica: effects of side chain and charge densities

Surface properties of a series of cationic bottle-brush polyelectrolytes with 45-unit-long poly(ethylene oxide) side chains were investigated by phase modulated ellipsometry and surface force measurements. The evaluation of the adsorbed mass of polymer on mica by means of ellipsometry is complex due to the transparency of mica and its birefringence and low dielectric constant. We therefore employed a new method to overcome these difficulties. The charge and the poly(ethylene oxide) side chain density of the bottle-brush polymers were varied from zero charge density and one side chain per segment to one charge per segment and no side chains, thus spanning the realm from a neutral bottle-brush polymer, via a partly charged brush polyelectrolyte, to a linear fully charged polyelectrolyte. The adsorption properties depend crucially on the polymer architecture. A minimum charge density of the polymer is required to facilitate adsorption to the oppositely charged surface. The maximum adsorbed amount and the maximum side chain density at the surface are obtained for the polymer with 50% charged segments and the remaining 50% of the segments carrying poly(ethylene oxide) side chains. It is found that brushlike layers are formed when 25-50% of the segments carry poly(ethylene oxide) side chains. In this paper, we argue that the repulsion between the side chains results in an adsorbed layer that is non-homogeneous on the molecular level. As a result, not all side chains will contribute equally to the steric repulsion but some will be stretched along the surface rather than perpendicular to it. By comparison with linear polyelectrolytes, it will be shown that the presence of the side chains counteracts adsorption. This is due to the entropic penalty of confining the side chains to the surface region.     

Entrapment of a weak polyanion and H+/Na+ exchange in confined polyelectrolyte microcapsules

An approach for the entrapment of a polyanion by polyelectrolyte microcapsules is reported. It is based on a reversal changing of microcapsule wall permeability from neutral to basic pH. Polyelectrolyte microcapsules were templated on latex (polystyrene) particles by the layer-by-layer adsorption of oppositely charged polymers of sodium poly(styrene sulfonate) and poly(allylamine hydrochloride), followed by core removal using tetrahydrofuran. In alkaline conditions, the microcapsules swell and become permeable for polymers. During encapsulation, the addition of salt ions increases the amount of the polymer encapsulated and contributes to its protonation because of redistribution of H+ ions across a semipermeable microcapsule wall. The redistribution of small ions across the microcapsule wall was tuned by adding salt according to the Donnan equilibrium and was characterized by H+ sensitive dyes.     

Molecular dynamics simulations of polyelectrolyte adsorption

We have performed molecular dynamics simulations of polyelectrolyte adsorption at oppositely charged surfaces from dilute polyelectrolyte solutions. In our simulations, polyelectrolytes were modeled by chains of charged Lennard-Jones particles with explicit counterions. We have studied the effects of the surface charge density, surface charge distribution, solvent quality for the polymer backbone, strength of the short-range interactions between polymers and substrates on the polymer surface coverage, and the thickness of the adsorbed layer. The polymer surface coverage monotonically increases with increasing surface charge density for almost all studied systems except for the system of hydrophilic polyelectrolytes adsorbing at hydrophilic surfaces. In this case the polymer surface coverage saturates at high surface charge densities. This is due to additional monomer-monomer repulsion between adsorbed polymer chains, which becomes important in dense polymeric layers. These interactions also preclude surface overcharging by hydrophilic polyelectrolytes at high surface charge densities. The thickness of the adsorbed layer shows monotonic dependence on the surface charge density for the systems of hydrophobic polyelectrolytes for both hydrophobic and hydrophilic surfaces. Thickness is a decreasing function of the surface charge density in the case of hydrophilic surfaces while it increases with the surface charge density for hydrophobic substrates. Qualitatively different behavior is observed for the thickness of the adsorbed layer of hydrophilic polyelectrolytes at hydrophilic surfaces. In this case, thickness first decreases with increasing surface charge density, then it begins to increase.