Conjugated polymer nanoparticles for small interfering RNA delivery

Loosely aggregated conjugated polymer nanoparticles (CPNs) were used as nontoxic and efficient small interfering RNA (siRNA) delivery vehicles with delivery visualization. A significant down regulation (94%) of a target gene was achieved by transfection of HeLa cells with the CPNs/siRNA complexes, supporting CPN as a promising siRNA delivery carrier.     

Molecular dynamics of zigzag single walled carbon nanotube immersion in water

The results of enthalpy of immersion in water for finite single-walled carbon nanotubes are reported. Using molecular dynamics simulation, we discuss the relation between the value of this enthalpy and tube diameters showing that the obtained plot can be divided into three regions. The structure of water inside tubes in all three regions is discussed and it is shown that the existence of the strong maximum of enthalpy observed for tube diameter ca. 1.17 nm is due to freezing of water under confinement. The calculations of hydrogen bond statistics and water density profiles inside tubes are additionally reported to confirm the obtained results. Next, we show the results of calculation for the same tubes but containing surface carbonyl oxygen groups at pore entrances. A remarkable rise in the value of enthalpy of immersion in comparison to the initial tubes is observed. We also discuss the influence of charge distribution between oxygen and carbon atom forming surface carbonyls on the structure of confined water. It is concluded for the first time that the presence of surface oxygen atoms at the pore entrances remarkably influences the structure and stability of ice created inside nanotubes, and surface carbonyls appear to be chaotropic (i.e. structure breaking) for confined water. This effect is explained by the pore blocking leading to a decrease (compared to initial structure) in the number of confined water molecules after introduction of surface oxygen groups at pore entrances.     

Amine basicity (pKb) controls the analyte binding energy on single walled carbon nanotube electronic sensor arrays

A wide range of analytes adsorb irreversibly to the surfaces of single walled carbon nanotube electronic networks typically used as sensors or thin-film transistors, although to date, the mechanism is not understood. Using thionyl chloride as a model electron-withdrawing adsorbate, we show that reversible adsorption sites can be created on the nanotube array via noncovalent functionalization with amine-terminated molecules of pKa < 8.8. A nanotube network comprising single, largely unbundled nanotubes, near the electronic percolation threshold is required for the effective conversion to a reversibly binding array. By examining 11 types of amine-containing molecules, we show that analyte adsorption is largely affected by the basicity (pKb) of surface groups. The binding energy of the analyte is apparently reduced by its adsorption on the surface chemical groups instead of directly on the SWNT array itself. This mediated adsorption mechanism is supported by X-ray photoelectron spectroscopy (XPS) and molecular potential calculations. Reversible detection with no active regeneration at the parts-per-trillion level is demonstrated for the first time by creating a higher adsorption site density with a polymer amine, such as polyethyleneimine (PEI). Last, we demonstrate that this transition to reversibility upon surface functionalization is a general phenomenon.     

Electro-oxidation of hydrazine at gold nanoparticle functionalised single walled carbon nanotube network ultramicroelectrodes

Networks of pristine single walled carbon nanotubes (SWNTs) grown by catalysed chemical vapour deposition (cCVD) on an insulating surface and arranged in an ultramicroelectrode (UME) format are insensitive to the electro-oxidation of hydrazine (HZ) in aqueous solution, indicating a negligible metallic nanoparticle content. Sensitisation of the network towards HZ oxidation is promoted by the deliberate and controlled electrodeposition of "naked" gold (Au) nanoparticles (NPs). By controlling the deposition conditions (potential, time) it is possible to control the size and spacing of the Au NPs on the underlying SWNT network. Two different cases are considered: Au NPs at a number density of 250 ± 13 NPs μm(-2) and height 24 nm ± 5 (effective surface coverage, θ = 92%) and (ii) Au NPs of number density ~ 22 ± 3 NPs μm(-2) and height 43 nm ± 8 nm (θ = 35%). For both morphologies the HZ oxidation half-wave potential (E(1/2)) is shifted significantly negative by ca. 200 mV, compared to a gold disc UME of the same geometric area, indicating significantly more facile electron transfer kinetics. E(1/2) for HZ oxidation for the higher density Au NP-SWNT structure is shifted slightly more negative (by ~25 mV) than E(1/2) for the lower density Au NP electrode. This is attributed to the lower flux of HZ at NPs in the higher number density arrangement (smaller kinetic demand). Importantly, using this approach, the calculated HZ oxidation current density sensitivities for the Au NP-SWNT electrodes reported here are higher than for many other metal NP functionalised carbon nanotube electrodes.     

Chiral response of single walled carbon nanotube based sensors to adsorption of amino acids: a theoretical model

Calculations of the interaction energy and dielectric responses of chiral single walled carbon nanotubes to the presence of amino acid enantiomers are carried out. A theoretical study is developed to show that the frequency shifts of selected nanotubes conveniently tailored to the size of the probed molecules and used in a resonator configuration can selectively detect different species of amino acids and the left- and right-handed enantiomers of these species. Criteria for an optimization of the adsorption energy and frequency response on the size and chiral angle of the nanotubes are given. It is found that a very small set of carbon tubes obeys these conditions.     

Voltammetric characterization of a fully integrated, patterned single walled carbon nanotube three-electrode system on a glass substrate

A single walled carbon nanotube (SWCNT)-based three-electrode system was fully integrated on glass substrates using a standard microfabrication process and electrochemically characterized using cyclic voltammetry. O(2) plasma functionalization of the SWCNT film working electrode for achieving high sensitivity was voltammetrically optimized with respect to the plasma power and treatment time. Chlorination of a Ag thin-film was done in an acidic solution for different dip times to form a thin-film Ag/AgCl reference electrode. The Nernstian behavior of as-prepared and seven-day-aged Ag/AgCl thin-film electrodes was investigated for seeking the optimum reference electrode with long-term stability and was compared to a commercial reference electrode. A quality control evaluation and a performance assessment of the fully integrated SWCNT-transferred sensing systems were performed using cyclic voltammetry. The proposed SWCNT-based three electrode device exhibited clear electrochemistry under voltammetric conditions, and is therefore a candidate for use in all electrochemical biosensors.     

Modification of single walled carbon nanotube surface chemistry to improve aqueous solubility and enhance cellular interactions

Single walled carbon nanotubes (SWNTs) continue to demonstrate the potential of nanoscaled materials in a wide range of applications. The ability to modulate the mechanical or electrical properties of a material by varying the SWNT component may result in diverse "application tunable" materials. Similarly, biomaterials used in tissue engineering applications may benefit from these characteristics by varying electrical and mechanical properties to enhance or direct tissue specific regeneration. The interactions between SWNTs and cellular systems need to be optimized to integrate these highly hydrophobic nanoparticles within an aqueous environment while maintaining their unique properties. We assessed solubility, conductance, and cellular interactions between four different SWNT preparations (unrefined, refined, and SWNT with either albumin or human plasma adsorbed). Initial interactions between cells and SWNTs were assessed within a 3D environment using a red blood cell lysis model, with longer-term interactions assessing the effects on PC12 and 3T3 fibroblast function when cultured on SWNT-collagen composite hydrogels. After SWNT purification, the lytic effect on red blood cells (RBCs) is significantly reduced from 11% to 0.7%, indicating manufacturing contaminants play a significant role in undesirable cell interactions. Nanotubes with either human plasma or albumin physisorbed onto the nanotube surface were significantly more hydrophilic than either unrefined or refined preparations and displayed improved RBC interactions. Despite improved dispersion, purification, and adsorption of either plasma or albumin, SWNTs caused a significant reduction in conductance. Although the molecular interactions occurring at the cell membrane remain unclear, these investigations have identified two main factors contributing to membrane failure: manufacturing impurities and to a lesser extend the material's innate hydrophobicity. Although purification is a critical step to remove toxic manufacturing contaminants, care must be taken to ensure improved aqueous dispersion does not compromise desirable mechanical and electrical attributes.     

Noncovalent interactions of molecules with single walled carbon nanotubes

In this critical review we survey non-covalent interactions of carbon nanotubes with molecular species from a chemical perspective, particularly emphasising the relationship between the structure and dynamics of these structures and their functional properties. We demonstrate the synergistic character of the nanotube-molecule interactions, as molecules that affect nanotube properties are also altered by the presence of the nanotube. The diversity of mechanisms of molecule-nanotube interactions and the range of experimental techniques employed for their characterisation are illustrated by examples from recent reports. Some practical applications for carbon nanotubes involved in non-covalent interactions with molecules are discussed.     

Chemical and biochemical sensing with modified single walled carbon nanotubes

The nano dimensions, graphitic surface chemistry and electronic properties of single walled carbon nanotubes make such a material an ideal candidate for chemical or biochemical sensing. Carbon nanotubes can be nondestructively oxidized along their sidewalls or ends and subsequently covalently functionalized with colloidal particles or polyamine dendrimers via carboxylate chemistry. Proteins adsorb individually, strongly and noncovalently along nanotube lengths. These nanotube-protein conjugates are readily characterized at the molecular level by atomic force microscopy. Several metalloproteins and enzymes have been bound on both the sidewalls and termini of single walled carbon nanotubes. Though coupling can be controlled, to a degree, through variation of tube oxidative pre-activation chemistry, careful control experiments and observations made by atomic force microscopy suggest that immobilization is strong, physical and does not require covalent bonding. Importantly, in terms of possible device applications, protein attachment appears to occur with retention of native biological structure. Nanotube electrodes exhibit useful voltammetric properties with direct electrical communication possible between a redox-active biomolecule and the delocalized pi system of its carbon nanotube support.     

84% catalyst activity of water-assisted growth of single walled carbon nanotube forest characterization by a statistical and macroscopic approach

We propose a statistical and macroscopic analysis to estimate the catalyst activity of water-assisted growth (super-growth) of single-walled nanotubes (SWNT) and to characterize SWNT forests. The catalyst activity was estimated to be 84% (+/-6%), the highest ever reported. The SWNT forest was found to be a very sparse material where SWNTs represent only 3.6% of the total volume. This structural sparseness is believed to play a critical role in achieving highly efficient growth.     

Adsorption of collagen onto single walled carbon nanotubes: a molecular dynamics investigation

Classical molecular dynamics (MD) simulation has been carried out to understand the adsorption of collagen like peptides onto single walled carbon nanotubes (CNT) in an aqueous environment. It is observed that the triple helical structure of all the model collagen like peptides (CPs) has been unaltered upon adsorption onto CNT. The model CPs do not wrap around the CNT, however, the axis of the triple helix subtends a cross angle with respect to the axis of the CNT. The interaction between the CPs and CNT as well as that between the CPs and water molecules was observed by MD simulation snapshots. The inherent nature of the interaction of CPs with CNT facilitates the penetration of CPs into the water/CNT interface. During this process, water molecules trapped between the CPs and CNT are appreciably displaced. Although, hydrophobic-hydrophobic interaction is crucial for the interaction, the role of πR (R = OH and NH(2)) interactions are also observed from the geometrical parameters. The sequence specific interaction of CPs with CNT is evident from the results. It is found that the length of the CNT, curvature of the CNT and length of the CPs do not significantly influence interaction between the two systems. Overall the findings provide important information for the development of nanocomposite materials from collagen and CNT.     

Electrochemical oxidation and nanomolar detection of acetaminophen at a carbon-ceramic electrode modified by carbon nanotubes: a comparison between multi walled and single walled carbon nanotubes

Carbon-ceramic electrodes (CCE) modified with carbon nanotubes were prepared, and the electrochemical behavior towards acetaminophen (ACOP) was investigated using both a bare CCE and electrodes modified with either single walled carbon nanotubes (SWCNT) or multi walled carbon nanotubes (MWCNT) in an effort to understand which of them is the better choice in terms of electrocatalyzing the oxidation of ACOP, and thus for sensing it. The SWCNT are found to be the better material in significantly enhancing the oxidation peak current and improving the reversibility of the oxidation. Under optimal conditions, linearity between the oxidation peak current and the concentration of ACOP is obtained for the concentration range from 40?nM to 85???M, with a detection limit of 25?nM. Finally, ACOP was successfully determined with the SWCNT modified electrode in pharmaceutical samples.

A novel exonuclease III aided amplification method for sensitive nucleic acid detection based on single walled carbon nanotube induced quenching

We describe herein a novel exonuclease III aided amplification method based on single walled carbon nanotube quenching (EASQ) for sensitive and convenient nucleic acid detection, which enabled 80-fold decrease of detection limit for HIV1 DNA assay compared with no target recycling.     

Controllable redox reaction of chemically purified DNA-single walled carbon nanotube hybrids with hydrogen peroxide

We report for the first time the controllable redox reaction of chemically purified ssDNA-HiPco SWNT hybrids with hydrogen peroxide. Compared with the suspensions before separation, the purified SWNT suspensions become inert with hydrogen peroxide which may serve as a platform for further chemical manipulation. In the presence of thiocyanate ions, the reaction of SWNTs with hydrogen peroxide is initiated and accelerated at the earlier reaction stage, accompanied with the near-infrared spectral suppression. At the later stage, the suppressed spectral intensity is recovered overtime. The thiocyanate ions may work as a mediator being able to control the reaction rate as well as the tunable properties of the reaction. The tunable redox reaction of SWNTs and H2O2 mediated by thiocyanate ions may offer a new sensing scheme for continuously monitoring H2O2 concentrations.     

Biosensor for bisphenol A leaching from baby bottles using a glassy carbon electrode modified with DNA and single walled carbon nanotubes

We have developed a biosensor for highly sensitive and selective determination of the endocrinic disruptor bisphenol A (BPA). It is based on glassy carbon electrode modified with calf thymus DNA and a composited prepared from single walled carbon nanotubes (SWNT) and Nafion. The interaction between BPA and DNA was studied by voltammetry. The binding constant was determined to be 3.55?×?10³ M^?1, and the binding site has a length of 4.3 base pairs. These electrochemical studies provide further information for a better understanding of the toxicity and carcinogenicity of BPA. Under optimal conditions, the biosensor displays a linear electrochemical response to BPA in the 10 nM to 20 μM concentration range, with a detection limit as low as 5.0 nM (at an S/N of 3). The method was successfully applied to the quantification of BPA in leachates from plastic baby bottles. Recoveries range from 94.0 % to 106.0 % which underpins the excellent performance of this SWNT-based DNA sensor.

Synthesis, characterization and application of monocarboxy-phthalocyanine-single walled carbon nanotube conjugates in electrocatalysis

In this paper we report on the synthesis, characterization and use of monocarboxy-phthalocyanine-single walled carbon nanotube conjugates in the electrocatalysis of amitrole and diuron. UV-Vis, FTIR and XRD spectroscopies were used in the characterization of cobalt(II)-tris(benzyl-mercapto)-mono(carboxyphenoxy)-phthalocyanine conjugates (CoMCPc-PA-SWCNT(linked)), while AFM was used to show changes in surface morphologies of the modified electrodes. Cyclic voltammetry and chronoamperometry were used for the electrocatalytic oxidation of amitrole and diuron on the modified glassy carbon electrode. The catalytic rate constants for amitrole and diuron were found to be 1.83 × 10⁶ and 1.99 × 10⁶ M⁻¹ s⁻¹, respectively. The linear range for both was 1.0 × 10⁻⁵-2.0 × 10⁻⁴ M, with sensitivities of 5.10 and 3.70 A mol⁻¹ L cm⁻² for amitrole and diuron, respectively. The limits of detection were estimated to be 0.14 and 0.20 μM for amitrole and diuron, respectively, using the 3δ notation.     

Electrochemical functionalization of single walled carbon nanotubes with polyaniline in ionic liquids

Single walled carbon nanotubes (SWNTs) are covalently functionalized during the electropolymerization of aniline in ionic liquids. In our experiment, 1-butyl-3-methyl-imidazolium hexafluorophosphate (BMIPF₆) containing 1 M trifluoroacetic acid (CF₃COOH) was selected as the ionic liquid media to separate SWNTs and to perform the electropolymerization of aniline within. The morphology of the resulting composite material of SWNT and polyaniline (PANI) was studied by scanning electron microscopy (SEM). Covalent bonding was evidenced by the increase of intensity ratio of the D band vs. G band in the Raman spectrum, whilst SWNTs may also be incorporated as big dopant anions to the PANI backbone. This paper provides a novel method by which large amount of SWNTs (15 mg/ml) can be modified by aniline electrochemically. p-type conducting polymer and n-type SWNTs can be thus copolymerized and applied to organic photovoltaics.