Novel nonionic surfactants based on sulfoxides. 2. Homo- and copolymers

The synthesis of new nonionic amphiphilic polymers of the polysoap type is described, as well as their general behaviour in aqueous solution. The polymers were prepared by homopolymerisation of acrylate polymerisable surfactants (or "surfmers"), which bear the nonionic sulfoxide moiety. Alternatively, small hydrophilic acrylate and acrylamide monomers bearing the nonionic sulfoxide moiety were copolymerised with dodecylacrylate and N-dodecyl- N-methylacrylamide. Compared to many other nonionic hydrophilic fragments, a single sulfoxide group behaves as a strongly hydrophilic fragment of small volume. However, its relative hydrophilicity depends sensitively on its precise positioning in the polymers. Properly placed, three sulfoxide groups can balance up to two dodecyl chains to obtain still water-soluble polymers that exhibit typical polysoap properties. Some of the new nonionic polymers show lyotropic liquid-crystalline behaviour at ambient temperature.     

Glycopolypeptides via living polymerization of glycosylated-L-lysine N-carboxyanhydrides

The preparation of new glycosylated-L-lysine-N-carboxyanhydride (glyco-K NCA) monomers is described. These monomers employ C-linked sugars and amide linkages to lysine for improved stability without sacrificing biochemical properties. Three glyco-K NCAs were synthesized, purified, and found to undergo living polymerization using transition metal initiation. These are the first living polymerizations of glycosylated NCAs and were used to prepare well-defined, high molecular weight glycopolypeptides and block and statistical glycocopolypeptides. This methodology solves many long-standing problems in the direct synthesis of glycopolypeptides from N-carboxyanhydrides relating to monomer synthesis, purification, and polymerization and gives polypeptides with 100% glycosylation. These long chain glycopolypeptides have potential to be good mimics of natural high molecular weight glycoproteins.     

Synthesis and properties of carbon-chain polymers with pendant 1,3,4-oxadiazole rings

Carbon-chain polymers with 1,3,4-oxadiazole rings were prepared by radical polymerization and polymer-analogous transformations. The kinetic relationships of the polymerization of vinyl-1,3,4-oxadiazole monomers and some properties of the resulting polymers were studied. The thermodynamics of interaction of poly-2-vinyl-5-methyl-1,3,4-oxadiazole, a nonionic water-soluble polymer, with water was examined.     

MOLECULAR DESIGN OF FUNCTIONAL POLYMERS BASED ON UNIQUE PROPERTIES OF POLYMER CHAINS

The inclusion complex formation of α-CD, β-CD, and γ-CD with various water-soluble polymers has beeninvestigated, and the relationship between the chain cross-sectional areas of the polymers and the diameters of the cavities ofcyclodextrins (molecular recognition) was found. Polyrotaxanes and tubular polymers were prepared on the basis ofmolecular recognition. Several kinds of polymers having tetraphenylporphyrin (TPP) and paramagnetic metallotetraphenyl-porphyrin (AgTPP, CuTPP, VOTPP or ZnTPP) have been prepared by radical polymerization of the correspondingmonomers. Visible spectra of these polymers show hypochromism in the Sorer bands of TPP moieties as compared withthose of monomers. Polymer effects were observed in the magnetic behavior and oxygen adsorption of paramagneticmetallotetraphenylporphyrin moieties. Moreover, polymer effects on photophysical and photochemical behavior were foundin the amphiphilic polymers covalently tethered with small amounts of zinc(Ⅱ)-tetraphenylporphyrin (ZnTPP).     

Polymerization in the crystalline state. VIII. Polymerization in N-carboxy anhydrides of γ-benzyl glutamate, γ-methyl glutamate,and ϵ-carbobenzoxylysine

The kinetics of the solid-state polymerization of the N-carboxy anhydrides (NCA) of the L - and racemic forms of γ-benzyl glutamate (BG), γ-methyl glutamate (MG), and ?-carbobenzoxylysine (CL) were studied as a function of temperature and aqueous vapor pressure. The reaction of the L -forms of BG and MG was characterized by an induction period, while the CL derivative reached its maximum polymerization rate at the outset of the reaction. Water vapor had only a minor effect in accelerating the reaction and reducing the chain length of the polypeptides formed. The racemic monomers were found to have different crystal structures from those of the L -isomers and the racemic MG and CL derivatives polymerized much more slowly than the corresponding optically active crystals. All polymers gave diffuse x-ray diffraction patterns. Infrared spectra of the L -polypeptides showed that they were largely in the α-helical form. The polymer derived from the racemic BG–NCA had a content of α-helical material which suggested that it consisted of polypeptides with long blocks of D and L residues.     

Synthesis and properties of polymeric azine and thiazine dyes

Some polymeric azine or thiazine dyes were prepared by radical polymerization of dye monomers or by polymer reactions between dyes and suitable prepolymers, and their photoredox reactivities were studied. The thionine polymers containing labile ? OH groups exhibited photochromism and thermochromism, which were extremely sensitive to the moisture content of the polymer film. The reversibility of the photochromism and thermochromism increased with the water content in the film. The water-soluble polymeric dyes were photobleached under the influence of suitable reducing agents. The degree of photobleaching was smaller than for the monomeric systems except for the dye polymers containing ? OH groups, probably because of the large steric hindrance of the polymers.     

A few characterization studies on some poly(methyl aryloxymethacrylates)

High polydispersity values obtained for the molecular weights, as determined by light scattering, osmometry, and GPC, of polymers prepared by different methods from the monomers recently synthesised indicate the presence of large quantities of low molecular weight species besides the high molecular weight species besides the high molecular weight species. Intrinsic viscosity data were used to evaluate Mark–Houwink constants K and “a” for this new series of monomers. DSC analyses show that the polymers have low T_g. X-ray diffraction studies made on the fibers show a high percentage of crystallinity in poly(methyl α-phenoxymethacrylate).     

One-pot RAFT/"click" chemistry via isocyanates: efficient synthesis of α-end-functionalized polymers

A new methodology has been developed for preparing α-functional polymers in a one-pot simultaneous polymerization/isocyanate "click" reaction. Our original synthetic strategy is based on the preparation of a carbonyl-azide chain transfer agent (CTA) precursor that undergoes the Curtius rearrangement in situ during reversible addition-fragmentation chain transfer (RAFT) polymerization yielding well-controlled α-isocyanate modified polymers. This strategy overcomes numerous difficulties associated with the synthesis of a polymerization mediator bearing an isocyanate at the R group and with the handling of such a reactive functionality. This new carbonyl-azide CTA can control the polymerization of a wide range of monomers, including (meth)acrylates, acrylamides, and styrenes (M(n) = 2-30 kDa; ? = 1.16-1.38). We also show that this carbonyl-azide CTA can be used as a universal platform for the synthesis of α-end-functionalized polymers in a one-pot RAFT polymerization/isocyanate "click" procedure.     

Inverse miniemulsion ATRP: a new method for synthesis and functionalization of well-defined water-soluble/cross-linked polymeric particles

A new methodology for the synthesis and functionalization of nanometer-sized colloidal particles consisting of well-defined, water-soluble, functional polymers with narrow molecular weight distribution (M(w)/M(n) < 1.3) was developed, utilizing atom transfer radical polymerization (ATRP) of water-soluble monomers in an inverse miniemulsion. The optional introduction of a disulfide-functionalized cross-linker allowed for the synthesis of cross-linked (bio)degradable nanogels. Dynamic light scattering (DLS) and atomic force microscopy (AFM) measurements indicated that these particles possessed excellent colloidal stability. ATRP in inverse miniemulsion led to materials with several desirable features. The colloidal particles preserved a high degree of halogen chain-end functionality, which enabled further functionalization. Cross-linked nanogels with a uniformly cross-linked network were prepared. They were degraded to individual polymeric chains with relatively narrow molecular weight distribution (M(w)/M(n) < 1.5) in a reducing environment. Higher colloidal stability, higher swelling ratios, and better controlled degradability indicated that the nanogels prepared by ATRP were superior to their corresponding counterparts prepared by conventional free radical polymerization (RP) in inverse miniemulsion.     

Adhesion of filamentous microbial cells on paper covered with ionic polymers by radiation polymerization

The adhesion of filamentous microbial cells such as Trichoderma reesei was studied by using carriers covered with polymers which were prepared by the radiation polymerization of ionic monomers. The weight of the cells adhering to the carriers increased with increasing cationic monomer content, indicating that the surface of the polymers prepared from cationic and hydrophobic monomers is suitable for the adhesion of the cells. The production of cellulase in the cells adhered to polymers from cationic monomers was higher than that in cells adhered to polymers prepared from anionic monomers. The growth of the cells adhered to the surfaces of the polymers was affected by the hydrophilicity of the polymers.     

Aromatic Foldamer Helices as α-Helix Extended Surface Mimetics

Helically folded aromatic oligoamide foldamers have a size and geometrical parameters very distinct from those of α-helices and are not obvious candidates for α-helix mimicry. Nevertheless, they offer multiple sites for attaching side chains. It was found that some arrays of side chains at the surface of an aromatic helix make it possible to mimic extended α-helical surfaces. Synthetic methods were developed to produce quinoline monomers suitably functionalized for solid phase synthesis. A dodecamer was prepared. Its crystal structure validated the initial design and showed helix bundling involving the α-helix-like interface. These results open up new uses of aromatic helices to recognize protein surfaces and to program helix bundling in water.     

Positive Photoreactive Polyimides. II. Preparation and Characterization of Polyimide Precursors Containing α-(2-Nitrophenyl)ethyl Ester Side Chains

The monomers were derived from pyromellitic dianhydride and α-(2-nitrophenyl)ethanol, which was prepared by selective reduction of 2-nitroacetophenone. Polyimide precursors were synthesized by an interfacial polycondensation technique. Their thermal properties in nitrogen were studied by dynamic thermogravimetry. The photore-arrangement of 2-nitrobenzyl ester having a methyl group at the α-position compared to that of the unsubstituted ester was investigated by infrared spectrophotometry. The polymers obtained in this study gave a high proportion of photorearrangement to show high sensitivity. The exposed areas dissolved in 2% aqueous KOH, forming high resolution patterns because they did not swell during the developing process.     

Preparation of poly(phenylene vinylene) from cycloalkylene sulfonium salt monomers and polymers

Two new types of p-xylene bis-sulfonium chloride monomers were prepared from cycloalkylene sulfides. The polymerization characteristics of these monomers to form poly(p-xylene sulfonium chlorides), and the thermal elimination reactions of their polymers to poly(p-phenylene vinylene), were compared with those of two monomers prepared from dialkyl sulfides. The cycloalkylene sulfonium chloride monomer polymerized to higher yields and to higher molecular weight polymers, which showed more efficient elimination reactions.     

Synthesis and ring-opening polymerization of optically pure mesogenic malolactonates

Optically pure malolactonate monomers containing biphenyl mesogenic groups with either an ethylene or a hexamethylene spacer were prepared from optically pure malic acid and polymerized with alkylaluminoxane catalysts to form a series of new chiral side chain liquid-crystalline polymers, which contained the chiral centres in the backbone. The mesogenic malolactonate monomers were determined to be optically pure by ¹H NMR spectroscopy of the β-lactone complexed with a chiral europium shift reagent. Both the methylaluminoxane and isobutylaluminoxane catalysts gave polymers having bimodal molecular weight distributions, the latter catalyst yielded a larger amount of the higher molecular weight fraction than the former. The polymers showed high optical rotations, high degrees of isotactic stereoregularity, and enantiotropic liquid-crystalline properties, all of which were influenced by the molecular weight distribution. Copolymers of malolactonate monomers with different spacers were also prepared and characterized.     

Syntheses of vinyl polymers containing a large π-electron cloud in the side chain

Several novel vinyl polymers containing five fused benzene rings in side chains were synthesized either by polymerization of the appropriate vinyl monomers or by chemical modification of the appropriate polymer. Thus, 3-(α-acryloyloxy)ethylperylene was prepared from perylene by Friedel-Crafts acylation with acetyl chloride and subsequent hydrogenation, followed by the reaction of the resulting alcohol with acryloyl chloride. 3-Acrylamido- or methacrylaminoperylene was prepared by the nitration of perylene, reduction of the resulting 3-nitroperylene, and the reaction with acryloyl or methacryloyl chloride. p-Vinylbenzal-3-acetylperylene was prepared by the condensation and dehydration reaction between p-vinylbenzaldehyde and 3-acetylperylene under alkaline medium, and, in the same manner, p-vinylbenzal-3-aminoperylene was prepared from p-vinyl benzaldehyde and 3-aminoperylene. All these monomers were polymerized with α,α′-azobisisobutyronitrile as catalyst in solution to afford the corresponding vinyl polymers. A vinyl polymer containing perylene-3-acetyl side chain was also prepared by the acetalization of poly(vinyl alcohol) with 3-formylperylene.     

Synthesis and Characterization of Bis(Isopropenylphenoxy)Alkanes and Bis(Vinylphenoxy)Alkanes: Two Classes of Highly Reactive,Photopolymerizable Monomers

Abstract

A novel and facile synthesis of difunctional, aromatic vinyl ether analogs is reported. These materials, which are conveniently prepared by the condensation of 4-acetoxystyrene or 4-isopropenylphenyl acetate with α, ω-dihaloalkanes in the presence of base, can be cationically polymerized using diaryliodonium or triarylsulfonium salts as photoinitiators to produce crosslinked polymers. Relative reactivities of the monomers toward cationic polymerization were studied using differential scanning photocalorimetry. The thermal stabilities of the polymers resulting from the photopolymerization of the difunctional, aromatic vinyl ether analogs were studied using thermogravimetric analysis.     

Towards a universal polymer backbone: design and synthesis of polymeric scaffolds containing terminal hydrogen-bonding recognition motifs at each repeating unit

Polymers containing terminal hydrogen-bonding recognition motifs based on diaminotriazine and diaminopyridine groups in their side chains for the self-assembly of appropriate receptors have been prepared by ring-opening metathesis polymerization (ROMP) of norbornenes. A new synthetic method for the preparation of norbornene monomers based on pure alkyl spacers is introduced. These monomers show unprecedented high reactivity using ROMP. To suppress self-association of diaminotriazine-based polymers, polymerizations were run in presence of N-butylthymine. The butylthymine acts as a protecting group via self-assembly onto the hydrogen-bonding sites of the polymeric scaffold, thereby solubilizing the polymer. Diaminopyridine monomers do not require the presence of a protecting group due to their low propensity to dimerize. In addition, they exhibit a high affinity for hydrogen-bonded receptors on both monomeric and polymeric level. These polymers present our first building blocks towards the design and synthesis of a "universal polymer scaffold".     

Synthesis and polymerization of methyl 3-methylenecyclobutene-1-carboxylate and dimethyl 3-methylenecyclobutene-1,2-dicarboxylate

The two title monomers were synthesized. In both cases the key cyclobutane intermediates were obtained by cycloaddition of allene to acrylonitrile or chloromaleic anhydride. These two new monomers proved to be highly reactive in free radical polymerization, and each polymerized spontaneously in air at room temperature. Linear polymers were prepared in dimethyl sulfoxide solution at 35° with AIBN and UV light. At higher temperatures crosslinking became a problem in some instances. The structure of the polymers derived from 1,4 polymerization in the diene portion of the monomers was confirmed by ¹³C-NMR, ¹H-NMR and IR spectra. Copolymers were prepared with methyl methacrylate, styrene, and p-methoxystyrene and were always rich in the methylene-cyclobutene monomers used. Films of homopolymers and copolymers could be cast from chloroform solution.     

Head-to-Head Polymers

Head-to-head polymers of α-olef ins, vinyl and acrylic monomers synthesized by indirect methods have shown similarities and differences in some of their behavior when compared to their counterparts of the common head to tail polymers. Head-to-head polyole-fins, such as polystyrene or polypropylene, were prepared by 1,4-polymerization of the corresponding 2,3-disubstituted butadienes-1,3 followed by hydrogenation of the remaining double bonds, polyacrylates by alternating copolymerization of ethylene and maleic anhydride, followed by esterification of the polymer. Head-to-head polyacrylates were reduced to poly(allyl alcohols) which were then acrylated to the acetates and benzoates. Head-to-head polyvinyl halides) were obtained from 1,4-polybutadiene by chlorination or bromination. The head-to-head polymers were characterized by spectroscopic analysis, some molecular weight characterization was done, and their thermal behavior was studied. The blending behavior with the corresponding head-to-tail polymers was studied in some cases; in others (head-to-head polystyrene), the blending with other polymers was investigated and the codegradation of the polymers was evaluated.     

Aminimides. XII. Synthesis,homo- and copolymerization studies of trialkylamine N-acryloyl or N-methacryloyl glycinimides and β-aminopropanimides

Some representative examples of a new family of aminimide monomers, i.e., trialkylamine N-acryloyl or N-methacryloyl glycinimides and β-aminopropanimides have been prepared and studied. These are the first examples of a possible large family of primary aminimide monomers. With radical initiators, the acryloyl and monosubstituted methacryloyl monomers readily homopolymerize. The disubstituted methacryloyl aminimides do not homopolymerize under the same conditions. All of the new monomers copolymerize with styrene, methyl methacrylate, and n-butyl acrylate. The various polymers were characterized by IR, DTA, TGA, GPC and inherent viscosities. When heated (160°C) the polymers liberate amine and crosslink in the presence of active hydrogen moieties to give resins with carbamate, urea, allophonate, etc., residues. When no active hydrogens are available during heating, polymers can be prepared with pendent primary isocyanate groups. This preliminary work shows these monomers to be highly useful for preparing a wide variety of reactive copolymers.