Intramolecular Charge-Transfer Dynamics in Benzodifuran-Based Triads

A facile and efficient approach for the synthesis of new conjugated donor-π-acceptor (D-π-A) chromophores has been developed, in which benzodifuran (BDF) and/or triphenyl amine (TPA) units are the donor moieties, linked by ethylenic bridges to electron-deficient anthraquinone (AQ) and 11,11,12,12-tetracyano-9,10-anthraquinodimethane (TCAQ) as the acceptor moieties. The resultant triads either with a symmetric A–D–A or an asymmetric D′–D–A structure show intense absorption bands in the visible spectral region due to efficient intramolecular charge transfer (ICT) from the HOMO localized on the BDF core to the LUMO localized on the AQ or the TCAQ unit. Electronic interactions between these redox-active components were studied by a combination of cyclic voltammetry, spectroelectrochemistry, UV-visible and ultrafast transient absorption spectroscopy. Analysis of the femtosecond excited-state dynamics reveal that all triads undergo a rapid charge recombination process which occurs within a few picoseconds, indicating that ethylenic linkers can facilitate electron delocalization among BDF and AQ/TCAQ units and thus impart effective electronic interactions between them.     

A Study of Spectroscopy on TCAQ Microcrystal

UV-visible absorption spectra of 11,11,12,12-tetracyano-9,10-anthraquinodimethane (TCAQ) solution, crystal and evaporated film were, measured. The absorption spectrum of TCAQ solution in DMF had three bands at 287 nm(4.45), 310 nm(4.23) and 350 nm(4.38) respectively; that of evaporated films had one band at 370 nm and that of crystalline powder had four bands at 243 nm, 275 nm, 320 nm and 430 nm respectively. Surface photovoltage spectra of TCAQ microcrystal gave two bands at P₁ (320 nm) and P₂ (430 nm) respectively. The absorption bands were assigned and the energy levels of frontier orbitals were tentatively determined. In addition,the mechanism of hole, production and transportation in crystalline TCAQ was discussed.     

Nonionic diethanolamide amphiphiles with unsaturated C18 hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behavior

The neat and lyotropic liquid crystalline phase behavior of three nonionic diethanolamide amphiphiles with C18 hydrocarbon chains containing one, two or three unsaturated bonds has been examined. This has allowed the effect of degree of unsaturation on the phase behavior of diethanolamide amphiphiles to be investigated. Neat linoleoyl and linolenoyl diethanolamide undergo a transition from a glassy liquid crystal to a liquid crystal at ～-85 °C, while neat oleoyl diethanolamide undergoes a transition at ～-60 °C to a liquid crystalline material before re-crystallizing at -34 °C. Oleoyl diethanolamide then undergoes a third transition from a crystalline phase to a smectic liquid crystalline phase at ～5 °C. In the absence of water, the transition temperature from a smectic liquid crystal to an isotropic liquid decreases with increasing unsaturation. The addition of water results in the formation of a lamellar phase (L(α)) for all three amphiphiles. The lamellar phase is stable under excess water conditions up to temperatures of at least 70 °C. Approximate partial binary amphiphile-water phase diagrams generated for the three unsaturated C18 amphiphiles indicate that the excess water point for each amphiphile occurs at ～60% (w/w) amphiphile.     

Achiral swallow-tailed materials with 'antiferroelectric-like' structure and their potential use in antiferroelectric mixtures

Achiral 'swallow-tailed' liquid crystalline materials are known to give alternating-tilt smectic C phases (S_Calt) which have structural similarities to the chiral antiferroelectric phases denoted as S*_CA. This paper describes the synthesis and characterization of three achiral branchedalkyl 4-(4'-dodecyloxybiphenyl-4-carbonyloxy)-3-fluorobenzoates. Optical microscopy and differential scanning calorimetry confirm that these materials show S_Calt and overlying S_A phases. The compounds were investigated as potential hosts which could be doped with a chiral ferroelectric liquid crystal so as to provide a viable- antiferroelectric mixture. These studies (microscopy and differential scanning calorimetry), to characterize the properties of the mixtures, show that antiferroelectric phases are induced. However, switching studies show that the antiferroelectric phases are extremely stable, a property which is almost certainly a consequence of the length of the lateral branching groups (ethyl, propyl and butyl).     

Control of molecular structure in the generation of highly luminescent liquid crystalline perylenebisimide derivatives: synthesis, liquid crystalline and photophysical properties

We report here, for the first time, the role of the molecular design on the liquid crystalline and solid-state photoluminescent properties of soluble and thermally stable liquid crystalline perylenebisimide derivatives. A new series of perylenebisimides were designed and developed for this purpose by adopting the stoichiometry-control approach, and amine-, hydroxyl-, ester-, and amide-functionalized molecules were synthesized. Various types of spacers with different lengths (C(2) to C(12)), types (linear, cyclohexyl, and tricyclodecane), and end-capped by phenyl or tridodecyloxy gallic units were introduced in the perylenebisimide core. The molecules were completely characterized by NMR, FT-IR, SEC, and MALDI-TOF mass techniques. Thermal analysis revealed that the perylenebisimide derivatives were thermotropic liquid crystalline, and threadlike nematic phases were observed under a polarizing light microscope. The spacer length and the rigidity of the spacers play a major role in the liquid crystalline properties of the materials. In phenyl systems, the C(6) chain with ester- and the C(12) chain with amide-end-capped molecules showed a nematic phase, whereas the C(6) chain with an amide end cap and their cyclic and tricyclic counterparts did not show any LC property. The introduction of a tridodecyloxy gallic unit induced the LC property in C(12) and the cyclohexyl system; however, it failed to do so in the tricyclodecane molecule. The absorption properties of the molecules were almost unchanged by the structural variation; however, the emission quantum yield in solution and photoluminescent (PL) intensity in the solid state were significantly different. Though the gallic unit induced liquid crystallinity in the perylenebisimide core, the quantum yield and PL intensity are 4-5 times less compared to those of the simple phenyl-capped liquid crystalline system. Among the various types of spacers, the tricyclodecane induced strong molecular aggregates via pi-stacking, which in turn increased the rigidity of the entire perylenebisimide core, resulting in the absence of liquid crystallinity and low luminescence compared to their linear and cyclohexyl analogues. The molecular aggregates were very stable even at very dilute concentration and also at high temperatures. The aggregates disappeared immediately upon addition of trifluoroacetic acid, thus confirming the strong hydrogen bonding in the aggregated states. In a nutshell, the present report demonstrates the importance of molecular design for introducing liquid crystalline phases in perylenebisimides and also the development of novel highly luminescent n-type pi-conjugated material for application in optoelectronics.     

Nonionic diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behaviour

The thermotropic and lyotropic liquid crystalline phase behaviour of a series of diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains (geranoyl, H-farnesoyl, and phytanoyl) has been investigated. When neat, both H-farnesoyl and phytanoyl diethanolamide form a smectic liquid crystalline structure at sub-zero temperatures. In addition, all three diethanolamides exhibit a glass transition temperature at around -73 °C. Geranoyl diethanolamide forms a lamellar crystalline phase with a lattice parameter of 17.4 ? following long term storage accompanied by the loss of the glass transition. In the presence of water, H-farnesoyl and phytanoyl diethanolamide form lyotropic liquid crystalline phases, whilst geranoyl diethanolamide forms an L(2) phase. H-farnesoyl diethanolamide forms a fluid lamellar phase (L(α)) at room temperature and up to ～ 40 °C. Phytanoyl diethanolamide displays a rich mesomorphism forming the inverse diamond (Q(II)(D)) and gyroid (Q(II)(G)) bicontinuous cubic phases in addition to an L(α) phase.     

New chiral binaphthyl building blocks: synthesis of the first optically active tetrathiafulvalene and 11,11,12,12-tetracyano-9, 10-anthraquinodimethane dimers

New enantiomerically pure binaphthyl derivatives bearing triphenylphosphine or phosphonate groups have been synthesized and used as building blocks to prepare the first optically active TTF and TCAQ dimers. Due to the restricted rotation of the two naphthalene rings, binaphthyl derivatives are ideal candidates to be used as nonplanar spacers between electroactive units in the search for materials with enhanced dimensionality. The electronic absorption spectra of dimers in which the electroactive unit is in conjugation with the naphthalene fragment reveal the presence of intramolecular photoinduced electron-transfer process from the TTF to the naphthalene unit in 5 and 6 and from the naphthalene moiety to the TCAQ unit in 7. Electrochemical studies on the new dimers show the redox potentials of TTF and TCAQ units as well as the oxidation wave for the naphthalene moiety and reveal no significant electronic interaction between the two electroactive units, which is in agreement with the results obtained from theoretical calculations at the PM-3 level which indicate that the angle between rings in the binaphthyl systems ranges from 75 to 80 degrees.     

Structural organization and phase behaviour of 1-butyl-3-methylimidazolium hexafluorophosphate: an high pressure Raman spectroscopy study

The complexity of the phase diagram of a representative room temperature ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate, [bmim][PF(6)]) is explored by means of Raman spectroscopy at high pressure (up to 1000 MPa) and high temperature (from room temperature to 100 °C) conditions. The first experimental evidence of the existence of a second crystalline phase for this salt at high pressure conditions is provided. By comparing the low frequency vibrational bands for the liquid state and the two observed crystalline phases, we confirm the scenario that considers the crystal polymorphism in this class of materials as a consequence of the rotational isomerism of the butyl chain. Furthermore the pressure dependence of other vibrational bands indicates the existence of a structural rearrangement across p≈ 50 MPa at ambient temperature.     

Donor/Acceptor fulleropyrrolidine triads

New C(60)-based triads, constituted by a fulleropyrrolidine moiety and two different electroactive units [donor 1-donor 2 (10, 15a,b), or donor 1-acceptor (17, 21)], have been synthesized by 1,3-dipolar cycloaddition reaction of azomethyne ylides to C(60) and further acylation reaction on the pyrrolidine nitrogen. The electrochemical study reveals some electronic interaction between the redox-active chromophores. Triads bearing tetrathiafulvalene (TTF) and ferrocene (Fc) (10) or pi-extended TTFs and Fc (15a,b) show reduction potentials for the C(60) moiety which are cathodically shifted in comparison to the parent C(60). In contrast, triads endowed with Fc and anthraquinone (AQ) (17) or Fc and tetracyanoanthraquinodimethane (TCAQ) (21) present reduction potentials for the C(60) moiety similar to C(60). Fluorescence experiments and time-resolved transient absorption spectroscopy reveal intramolecular electron transfer (ET) processes from the stronger electron donor (i.e., TTF or extended TTF) to the fullerene singlet excited state, rather than from the poorer ferrocene donor in 10, 15a,b. No evidence for a subsequent ET from ferrocene to TTF(*)(+) or pi-extended TTF(*)(+) was observed.     

用核磁共振方法研究聚硅氧烷类液晶侧链的结构异构

<正> 近十多年来,侧链型液晶聚合物的研究日益活跃。研究结果表明,这类聚合物将作为新的功能材料,在化合物分离、信息存储和显示装置上得到实际应用。聚硅氧烷类侧链型液晶是迄今研究得最多,很有潜在实用价值的一种侧链型高分子液晶。它通常是用含中介基团的烯烃与聚甲基氢硅氧烷通过硅氢化反应制得的。文献中给出的反应式都可表示为:     

Self-assembly of dendron-helical polypeptide copolymers: organogels and lyotropic liquid crystals

New macromolecular self-assembling building blocks, dendron-helical polypeptide copolymers, have been synthesized; these materials possess a well-defined 3-D shape and self-assemble in solution to form nanoribbon and lyotropic liquid crystalline phases.     

Silver Nitrate/Oligo(ethylene Oxide) Surfactant/Mesoporous Silica Nanocomposite Films and Monoliths

A lyotropic, liquid crystalline (LC) phase of a silver nitrate/oligo(ethylene oxide), water, and acid mixture was used for one-pot synthesis of mesoporous silica materials in which Ag(+) ions are uniformly distributed. We established that the AgNO(3)-to-surfactant mole ratio is very important in a 50 wt% surfactant/water system to preserve the hexagonal LC phase before and after the addition of the silica source. Below a 0.6 AgNO(3)-to-surfactant mole ratio, the mixture is liquid crystalline and serves as a template for silica polymerization. However, between 0.6 and 0.8 AgNO(3)-to-surfactant mole ratios, one must control the composition of the mixture during the polymerization processes. Above a 0.8 mole ratio, Ag(+) ions undergo phase separation from the reaction mixture by complexing with the surfactant molecules. The resulting silica materials obtained from AgNO(3)/surfactant ratios above 0.8 have anisotropy but without a hexagonal mesophase. Here, we establish a AgNO(3) concentration range in which the LC phase is preserved to template the synthesis of mesoporous silica, and we discuss the structural behavior of the mixtures at AgNO(3)/surfactant mole ratios of 0.00-2.00, using POM, PXRD, FTIR, and UV-Vis absorption spectroscopy. Copyright 2001 Academic Press.     

Photoinduced alignment of polymerisable liquid crystals on photoreactive polymers containing 2,6-bis(benzylidene)-1-cyclohexanone units in the main chain

Photoreactive polymers containing 2,6-bis(benzylidene)-1-cyclohexanone (bisBC) units were synthesised and investigated as a photoalignment layer for polymerisable liquid crystals (PLCs) and liquid crystalline polymers (LCPs). The liquid crystalline materials were aligned homogeneously on the photoalignment layers in a wide range of irradiation dose of linearly polarised UV light (LPUVL). Specifically, for the photoalignment layer baked at 80°C, order parameters of the liquid crystalline materials were low due to the disturbance of oriented-photoreactive polymer caused by the contact with the solvent of liquid crystalline materials. However, the liquid crystalline materials were aligned homogeneously even at low irradiation doses on the thermally cured photoalignment layer baked at 180°C. In addition, the liquid crystalline materials were aligned perpendicular to the LPUVL electric field. The alignment mechanism is discussed by comparing the retardation of photoalignment layer with anisotropic polarisabilities of model molecules calculated by density functional theory (DFT). It is suggested that the liquid crystalline materials aligned along the unreacted chromophores in the photoreactive polymer.     

Mixed oxide semiconductors based on bismuth for photoelectrochemical applications

The structural and photoelectrochemical properties of mixed oxide semiconductor films of Bi-Nb-M-O (M = Al, Fe, Ga, In) were studied in order to explore their use as photoanodes in photoelectrochemical cells. These films were prepared on AISI/SAE 304 stainless steel plates by sol–gel dip-coating. The films were characterized by scanning electron microscopy—energy dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), and their photoelectrochemical properties were studied by open circuit potential (OCP) measurements, linear sweep voltammetry (LSV), and cyclic voltammetry (CV). SEM micrographs show homogeneous and rough films with agglomerates on the surface. EDS analyses show that the films are composed of Bi, Nb, and M, and the agglomerates are mainly composed of Bi. XRD analyses show a predominant crystalline phase of bismuth(III) oxide (Bi₂O₃) and a secondary phase composed of Bi-M mixed oxides. It is noteworthy that there was no identified niobium-based crystalline phase. XPS results reveal that the films are composed by Bi(III), Nb(V), and M(III). CV results show that the electrochemical behavior is attributed only to the semiconductor films which indicate a good coating of the stainless steel support. OCP measurements show that all the films have n-type semiconductor properties and exhibited photoresponse to the visible light irradiation. LSV results show that the application of a potential higher than +0.1 V enhances the photocurrent which can be attributed to an improved charge carrier separation. The results indicate that these materials can be used in photoelectrochemical cells.     

Evidence for quantum interference in SAMs of arylethynylene thiolates in tunneling junctions with eutectic Ga-In (EGaIn) top-contacts

This paper compares the current density (J) versus applied bias (V) of self-assembled monolayers (SAMs) of three different ethynylthiophenol-functionalized anthracene derivatives of approximately the same thickness with linear-conjugation (AC), cross-conjugation (AQ), and broken-conjugation (AH) using liquid eutectic Ga-In (EGaIn) supporting a native skin (~1 nm thick) of Ga(2)O(3) as a nondamaging, conformal top-contact. This skin imparts non-Newtonian rheological properties that distinguish EGaIn from other top-contacts; however, it may also have limited the maximum values of J observed for AC. The measured values of J for AH and AQ are not significantly different (J ≈ 10(-1)A/cm(2) at V = 0.4 V). For AC, however, J is 1 (using log averages) or 2 (using Gaussian fits) orders of magnitude higher than for AH and AQ. These values are in good qualitative agreement with gDFTB calculations on single AC, AQ, and AH molecules chemisorbed between Au contacts that predict currents, I, that are 2 orders of magnitude higher for AC than for AH at 0 < |V| < 0.4 V. The calculations predict a higher value of I for AQ than for AH; however, the magnitude is highly dependent on the position of the Fermi energy, which cannot be calculated precisely. In this sense, the theoretical predictions and experimental conclusions agree that linearly conjugated AC is significantly more conductive than either cross-conjugated AQ or broken conjugate AH and that AQ and AH cannot necessarily be easily differentiated from each other. These observations are ascribed to quantum interference effects. The agreement between the theoretical predictions on single molecules and the measurements on SAMs suggest that molecule-molecule interactions do not play a significant role in the transport properties of AC, AQ, and AH.     

Unique Thermal Structural Phase Transitions Exhibited by Unsymmetrical Organometallic Gold(III)-Dithiolene Complexes with Pentylthio and Hexylthio Groups

Unsymmetrical gold(III)-dithiolene complexes are potential candidates for molecular materials that exhibit thermal structural phase transitions. In this study, unsymmetrical ppy-gold(III) (ppy⁻=C-deprotonated-2-phenylpyridine(−)) complexes [AuC5] and [AuC6] coordinated by dithiolene ligands containing tetrathiafulvalene (TTF) skeletons with pentylthio (2-{bis(pentylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate(2−)) and hexylthio groups (2-{bis(hexylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate(2−)) were synthesized. Both complexes exhibited a large absorption band at approximately 508 nm, owing to intramolecular ligand-to-ligand charge transfer. One-dimensional columnar structures with head-to-tail molecular arrangements around the metal ions were constructed in the crystals. The flexible alkylthio groups were intercalated into crystalline spaces between dithiolene ligands in the columns. [AuC5] exhibits a simple phase transition at 198 °C between crystalline and isotropic phases irreversibly. The crystalline phase of [AuC6] observed at 25 °C melted at 148 °C. Another crystalline phase grew above 148 °C with a very slow crystallization rate from the liquid phase and was completely transformed into an isotropic phase at 200 °C.     

Delayed ignition of autocatalytic combustion precursors: low-temperature nanomaterial binder approach to electronically functional oxide films

Delayed ignition of combustion synthesis precursors can significantly lower metal oxide film formation temperatures. From bulk In(2)O(3) precursor analysis, it is shown here that ignition temperatures can be lowered by as much as 150 °C. Thus, heat generation from ~60 nm thick In(2)O(3) films is sufficient to form crystalline In(2)O(3) films at 150 °C. Furthermore, we show that the low processing temperatures of sufficiently thick combustion precursor films can be applied to the synthesis of metal oxide nanocomposite films from nanomaterials overcoated/impregnated with the appropriate combustion precursor. The resulting, electrically well-connected nanocomposites exhibit significant enhancements in charge-transport properties vs conventionally processed oxide films while maintaining desirable intrinsic electronic properties. For example, while ZnO nanorod-based thin-film transistors exhibit an electron mobility of 10(-3)-10(-2) cm(2) V(-1) s(-1), encasing these nanorods within a ZnO combustion precursor-derived matrix enhances the electron mobility to 0.2 cm(2) V(-1) s(-1). Using commercially available ITO nanoparticles, the intrinsically high carrier concentration is preserved during nanocomposite film synthesis, and an ITO nanocomposite film processed at 150 °C exhibits a conductivity of ~10 S cm(-1) without post-reductive processing.     

Symmetrical electron-deficient materials incorporating azaheterocycles

To investigate the potential of di- and tri-azaheterocycles as building blocks for pi-conjugated materials with high electron affinity, linear oligomers incorporating pyrazine and a C(3)-symmetric discotic molecule based on triazine were synthesized. The tridodecyloxyphenyl end-capped ethynylene pyrazinylene oligomers showed remarkable solvatochroism in absorption and emission in solution. The oligomers containing one and two pyrazine rings displayed liquid crystallinity in the solid state. The largest ethynylene pyrazinylene oligomer containing three pyrazine rings had the lowest first reduction potential at -1.08 V. The triazine-derived discotic molecule exhibited UV/Vis and fluorescence behavior comparable to that of the linear oligomers and featured a first reduction potential at -1.49 V, somewhat lower than expected.     

Anthraquinone-Based Oligomer as a Long Cycle-Life Organic Electrode Material for Use in Rechargeable Batteries

An anthraquinone (AQ)-based dimer and trimer linked by a triple bond (−C≡C−) were newly synthesized as active materials for the positive electrode of rechargeable lithium batteries. These synthesized oligomers exhibited an initial discharge capacity of about 200 mAh g⁻¹ with an average voltage of 2.2–2.3 V versus Li_(C.E.). These capacity values are similar to that of the AQ-monomer, reflecting the two-electron transfer redox per AQ unit. Regarding their cycling stability, the capacity of the monomer electrode quickly decreased; however, the electrodes of the prepared oligomers showed an improved cycling performance. In particular, the discharge capacities of the trimer remained almost constant for 100 cycles. A theoretical calculation revealed that the intermolecular binding energy can be increased to the level of a weak covalent bonding by oligomerization, which would be beneficial to suppress the dissolution of the organic active materials into the electrolyte solutions. These results show that the cycle-life of organic active materials can be extended without lowering the discharge capacity by the oligomerization of the redox active molecule unit.     

Synthesis of Highly n-Type Graphene by Using an Ionic Liquid

n-Type graphene: A new, easy, and cheap method to produce n-type reduced graphene oxide was developed by synthesizing a partially reduced intermediate containing nitrogen (PrGO-IL, see scheme) by treating graphene oxide (GO) with an ionic liquid (IL) at 160?°C followed by rapid thermal annealing (RTA) at temperatures ranging from 400 to 1000?°C. A high N-doping level of 6?% was achieved and the N-doped rGO exhibits n-type behavior with a Dirac point at -38?V at 400?°C.