Effects of pH,salt, surfactant and composition on phase transition of poly(NIPAm/MAA) nanoparticles

The volume phase transition of poly(NIPAm/MAA) copolymer nanoparticles in buffer solutions at various pH and in aqueous solutions of KCl or ionic surfactants (SDS and DTMAB) was systematically studied using dynamic laser scattering technique. It was found that ionizable MAA groups imparted a responsiveness of the particles to pH and electrolytes. At pH > pKa of the copolymer, electrostatic repulsion of negative charges, mostly from COO⁻ groups, was a governing mechanism for preventing the particles from collapse at T > T_tr. The particles exhibited a sharp volume phase transition upon elimination of the negative charges by decreasing the pH of the medium or by the addition of cationic surfactant. At pH < pKa, the presence of MAA groups enhanced the hydrophobicity of the particles as indicated by a lower T_tr and a sharper volume phase transition. A pH 4 buffer at the same ionic strength exhibited the most significant effect on the particle size and phase transition, followed by the ionic surfactant with an opposite charge (e.g., DTMAB), KCl, and finally the ionic surfactant with the same charge (e.g. SDS). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2667–2676, 1999     

SANS and SAXS analysis of charged nanoparticle adsorption at oil-water interfaces

A systematic study of the adsorption of charged nanoparticles at dispersed oil-in-water emulsion interfaces is presented. The interaction potentials for negatively charged hexadecane droplets with anionic polystyrene latex particles or cationic gold particles are calculated using DLVO theory. Calculations demonstrate that increased ionic strength decreases the decay length of the electrostatic repulsion leading to enhanced particle adsorption. For the case of anionic PS latex particles, the energy barrier for particle adsorption is also reduced when the surface charge is neutralized through changes in pH. Complementary small-angle scattering experiments show that the highest particle adsorption for PS latex occurs at moderate ionic strength and low pH. For cationic gold particles, simple DLVO calculations also explain scattering results showing that the highest particle adsorption occurs at neutral pH due to the electrostatic attraction between oppositely charged surfaces. This work demonstrates that surface charges of particles and oil droplets are critical parameters to consider when engineering particle-stabilized emulsions.     

Double‐Stimuli‐Responsive Spherical Polymer Brushes with a Poly(ionic liquid) Core and a Thermoresponsive Shell

The synthesis of poly(ionic liquid) (PIL) nanoparticles grafted with a poly(N‐isopropyl acrylamide) (PNIPAM) brush shell is reported, which shows responsiveness to temperature and ionic strength in an aqueous solution. The PIL nanoparticles are first prepared via aqueous dispersion polymerization of a vinyl imidazolium‐based ionic liquid monomer, which is purposely designed to bear a distal atom transfer radical polymerization (ATRP) initiating group attached to the long alkyl chain via esterification reaction. The size of the PIL nanoparticles can be readily tuned from 25 to 120 nm by polymerization at different monomer concentrations. PNIPAM brushes are successfully grafted from the surface of the poly(ionic liquid) nanoparticles via ATRP. The stimuli‐responsive behavior of the poly(ionic liquid) nanoparticles grafted with PNIPAM brushes (NP‐g‐PNIPAM) in aqueous phase is studied in detail. Enhanced colloidal stability of the NP‐g‐PNIPAM brush particles at high ionic strength compared to pure PIL nanoparticles at room temperature is achieved. Above the lower critical solution temperature (LCST) of PNIPAM, the brush particles remain stable, but a decrease in hydrodynamic radius due to the collapse of the PNIPAM brush onto the PIL nanoparticle surface is observed.

     

Anomalous electrophoretic mobility of microgel particles in buffer solutions

The electrophoretic mobility (μ) of tunable surface charge poly(N-isopropylacrylamide) microgel particles (PNIPAM) was measured vs pH, using different anionic buffers. Two minima, just at the buffers’ pK values, were found for the μ-pH curve. The preferential penetration of the small counterions into the soft-charged shell explains the electrokinetic charge reduction. For pH values higher than the pK, the charge screening leads to electrostatic repulsions among coions. It pushes them towards the particles; thus, balancing the global ionic distribution.     

Temperature, pH, and ionic strength induced changes of the swelling behavior of PNIPAM-poly(allylacetic acid) copolymer microgels

The volume phase transition of colloidal microgels made of N-isopropylacrylamide (NIPAM) is well-studied and it is known that the transition temperature can be influenced by copolymerization. A series of poly( N-isopropylacrylamide- co-allylacetic acid) copolymers with different contents of allylacetic acid (AAA) was synthesized by means of a simple radical polymerization approach. The thermoresponsive behavior of these particles was studied using dynamic light scattering (DLS). Further characterization was done by employing transmission electron microscopy (TEM) and zeta potential measurements. TEM observations reveal the approximately spherical shape and low polydispersity of the copolymer particles. In addition, the measured zeta potentials provide information about the relative surface charge. Since these copolymers are much more sensitive to external stimuli such as pH and ionic strength than their pure PNIPAM counterparts, the volume phase transition was investigated at two different pH values and various salt concentrations. At pH 10 for the copolymer microgels with the highest AAA content, a significant shift of the volume phase transition temperature toward higher values is found. For higher AAA content, a change in pH from 8 to 10 can induce a change in radius of up to 100 nm making the particles interesting as pH controlled actuators.     

Thermoresponsive core-shell microgels with silica nanoparticle cores: size, structure, and volume phase transition of the polymer shell

Core-shell microgels made of the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM) and silica nanoparticles as inorganic cores were investigated by dynamic light scattering (DLS) and small angle neutron scattering (SANS). In order to study the response of the particles upon changes of temperature, experiments were done in a temperature interval close to the volume phase transition temperature of the PNIPAM shell. While DLS probes the hydrodynamic dimensions of the particles, determining their centre of mass diffusion, SANS provides the correlation length xi of the PNIPAM network. Additionally, the composite particles were characterised by electron microscopy as well as atomic force microscopy to reveal the core-shell structure and at the same time the approximate dimensions and the shape of the microgels.     

Steric stabilization of thermally responsive N-isopropylacrylamide particles by poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was used as a steric stabilizer for the dispersion polymerization of cross-linked poly(N-isopropylacrylamide) (PNIPAM) in water. A series of reactions were carried out using PVA of varying molecular weight and degree of hydrolysis. Under appropriate conditions, PNIPAM particles of uniform and controllable size were produced using PVA as the stabilizer. The colloidal stability was investigated by measuring changes in particle size with temperature in aqueous suspensions of varying ionic strength. For comparison, parallel colloidal stability measurements were conducted on PNIPAM particles synthesized with low-molecular-weight ionic surfactants. PVA provides colloidal stability over a wide range of temperature and ionic strength, whereas particles produced with ionic surfactants flocculate in moderate ionic strength solutions upon collapse of the hydrogel as the temperature is increased. Experimental results and theoretical consideration indicate that sterically stabilized PNIPAM particles resulted from the grafting of PVA to the PNIPAM particle surface. The enhanced colloidal stability afforded by PVA allows the temperature-responsive PNIPAM particles to be used under physiological conditions where electrostatic stability is ineffective.     

Poly(methyl methacrylate)/poly(N-isopropylacrylamide) core-shell particles prepared by seeded precipitation polymerization: Unusual morphology and thermo-sensitivity of zeta potential

Poly（methyl methacrylate）/poly（N-isopropylacrylamide） （PMMA/PNIPAM） core-shell particles were synthesized by seeded precipitation polymerization of N-isopropylacrylamide （NIPAM） in the presence of PMMA seed particles. The anionic potassium persulfate was used as initiator, and acrylic acid as functional comonomer. It was shown that the weight ratio of the PNIPAM shell to the PMMA core can be greatly increased through continuous addition of NIPAM monomer at a relatively slow rate. PMMA/PNIPAM particles with different shell thickness were obtained by varying the amount of charged NIPAM monomers. These particles exhibited unique nonspherical core-shell morphology. PMMA core was partially coated by dense hair-like or antler-like PNIPAM shell depending on the shell thickness. The measurement of these particles＇ zeta potential at different temperatures showed that the absolute value of zeta potential unusually decreased as the particle size decreased with temperature.     

Direct imaging of temperature-sensitive core-shell latexes by cryogenic transmission electron microscopy

We present a comprehensive investigation of the volume transition in thermosensitive core-shell particles. The particles consist of a solid core of poly (styrene) (radius: 52 nm) onto which a network of crosslinked poly(N-isopropylacrylamide) (PNIPAM) is affixed. The degree of crosslinking of the PNIPAM shell effected by the crosslinker N,N ^′-methylenebisacrylamide was varied between 1.25 and 5 mol%. Immersed in water, the shell of these particles is swollen at low temperatures. Raising the temperature above 32°C leads to a volume transition within the shell. Cryogenic transmission electron microscopy (Cryo-TEM) and dynamic light scattering (DLS) have been used to investigate the structure and swelling of the particles. The Cryo-TEM micrographs directly show inhomogeneities of the network. Moreover, a buckling of the shell from the core particle is evident. This buckling increases with decreasing degree of crosslinking. A comparison of the overall size of the particles determined by DLS and Cryo-TEM demonstrates that the hydrodynamic radius provides a valid measure for the size of the particles. The phase transition within the network measured by DLS can be described by the Flory–Rehner theory. It is shown that this model captures the main features of the volume transition within the core-shell particles including the dependence of the phase transition on the degree of crosslinking. All dispersions crystallize at volume fractions above 0.5. The resulting phase diagram is identical to the phase behavior of hard spheres within the limits of error. This demonstrates that the core-shell microgels can be treated as hard spheres up to volume fractions of at least 0.55.     

Aggregation and charging of colloidal silica particles: effect of particle size

We studied systematically aqueous suspensions of amorphous well-characterized silica particles by potentiometric titration, electrophoretic mobility, and time-resolved light scattering. Their charging behavior and aggregation rate constants were measured as a function of pH and ionic strength in KCl electrolytes for three types of particles of approximately 30, 50, and 80 nm in diameter. The charging behavior was consistent with the basic Stern model; the silica particles carry a negative charge, and its magnitude gradually increases with increasing pH and ionic strength. On the other hand, their early-stage aggregation (or coagulation) behavior is complex. The aggregation of the largest particles shows features resembling predictions of the Derjaguin, Landau, Verwey, and Overbeek (DLVO) theory. On one hand, the rate constant decreases sharply with increasing pH at low ionic strengths and attains fast aggregation conditions at high ionic strengths. On the other hand, we observe a characteristic slowing down of the aggregation at low pH and high ionic strengths. This feature becomes very pronounced for the medium and the small particles, leading to a complete stabilization at low pH for the latter. Stabilization is also observed at higher pH for the medium and the small particles. From these aggregation measurements we infer the existence of an additional repulsive force. Its origin is tentatively explained by postulating hairy layers of consisting of poly(silicilic acid) chains on the particle surface.     

Facile strategy for synthesis of silica/polymer hybrid hollow nanoparticles with channels

The silica/polymer hybrid hollow nanoparticles with channels and gatekeepers were successfully fabricated with a facile strategy by using thermoresponsive complex micelles of poly(ethylene glycol)-b-poly(N-isopropylacrylamide) (PEG-b-PNIPAM) and poly(N-isopropylacrylamide)-b-poly(4-vinylpyridine) (PNIPAM-b-P4VP) as the template. In aqueous solution, the complex micelles (PEG-b-PNIPAM/PNIPAM-b-P4VP) formed with the PNIPAM block as the core and the PEG/P4VP blocks as the mixed shell at 45 °C and pH 4.0. After shell cross-linking by 1,2-bis(2-iodoethoxyl)ethane (BIEE), tetraethylorthosilicate (TEOS) selectively well-deposited on the P4VP block and processed the sol-gel reaction. When the temperature was decreased to 4 °C, the PNIPAM block became swollen and further soluble, and the PEG-b-PNIPAM block copolymer escaped from the hybrid nanoparticles as a result of swelled PNIPAM and weak interaction between PEG and silica at pH 4.0. Therefore, the hybrid hollow silica nanoparticles with inner thermoresponsive PNIPAM as gatekeepers and channels in the silica shell were successfully obtained, which could be used for switchable controlled drug release. In the system, the complex micelles, as a template, could avoid the formation of larger aggregates during the preparation of the hybrid hollow silica nanoparticles. The thermoresponsive core (PNIPAM) could conveniently control the hollow space through the stimuli-responsive phase transition instead of calcination or chemical etching. In the meantime, the channel in the hybrid silica shell could be achieved because of the escape of PEG chains from the hybrid nanoparticles.     

Novel self-organization of polymer particles on hydrophobic solid surfaces through hydrophobic interaction

A novel technique of particle monolayer fabrication based on hydrophobic interactions in aqueous systems is described in this paper. When alkylated glass plates modified with various silane coupling agents were immersed in aqueous dispersions of submicron-sized polystyrene particles of cationic or anionic surface charges, cationic particle monolayers containing active ester groups were effectively formed at the plate surfaces, whereas no anionic particles were self-organized on the plate surfaces. The coverage of the plates with cationic particles and the morphology of the monolayers varied with the hydrophobicities of the particles and plates as well as with the ionic strength of the medium and temperature. For less hydrophobic methylated glass surfaces modified with methyltriethoxysilane, cationic particles were self-organized at relatively regular intervals, whereas they were self-organized in the form of aggregates for the more hydrophobic octadecylated glass plates treated with n-octadecyltriethoxysilane. Closely packed monolayers were fabricated by adjusting ionic strength and temperature. Fluorescence labelling of cationic particle monolayers was successfully accomplished by the reaction of remaining active ester groups on the monolayers with a fluorescence probe containing amino groups. Cationic particle monolayers were physically stabilized by heating above the glass transition temperature (T _g) of the particles.     

Cationic amino-containing N-isopropyl- acrylamide-styrene copolymer particles: 2-surface and colloidal characteristics

 In a previous paper [1], the synthesis of various polystyrene– poly[NIPAM] core–shell latexes bearing cationic amidino and/or amino charges has been described. Several colloidal properties of these cationic latexes have been charac-terized such as: particle size, surface charge density, electrophoretic mobility and finally colloidal stability. Due to the poly[NIPAM]-rich layer in the shell, it was found that temperature played a significant role on all these properties, a LCST around 33 °C being exhibited. In addition, ionic strength was also found to affect the colloidal behavior of these latexes, the largest effect being observed with latexes having both amidino and amino surface charges. The critical coagulation concentra-tions (CCC) of the various latexes above and below the LCST were determined, highlighting the contribution of electrostatic and steric repulsive forces to the stability of these particles. Received: 20 January 1998 Accepted: 8 June 1998     

Novel temperature‐ and pH‐responsive graft copolymers composed of poly(L‐glutamic acid) and poly(N‐isopropylacrylamide)

A series of novel temperature‐ and pH‐responsive graft copolymers, poly(L ‐glutamic acid)‐g‐poly(N‐isopropylacrylamide), were synthesized by coupling amino‐semitelechelic poly(N‐isopropylacrylamide) with N‐hydroxysuccinimide‐activated poly(L ‐glutamic acid). The graft copolymers and their precursors were characterized, by ESI‐FTICR Mass Spectrum, intrinsic viscosity measurements and proton nuclear magnetic resonance (¹H NMR). The phase‐transition and aggregation behaviors of the graft copolymers in aqueous solutions were investigated by the turbidity measurements and dynamic laser scattering. The solution behavior of the copolymers showed dependence on both temperature and pH. The cloud point (CP) of the copolymer solution at pH 5.0–7.4 was slightly higher than that of the solution of the PNIPAM homopolymer because of the hydrophilic nature of the poly(glutamic acid) (PGA) backbone. The CP markedly decreased when the pH was lowered from 5 to 4.2, caused by the decrease in hydrophilicity of the PGA backbone. At a temperature above the lower critical solution temperature of the PNIPAM chain, the copolymers formed amphiphilic core‐shell aggregates at pH 4.5–7.4 and the particle size was reduced with decreasing pH. In contrast, larger hydrophobic aggregates were formed at pH 4.2. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4140–4150, 2008     

Polyelectrolyte complex nanoparticles from N‐carboxyethylchitosan and polycationic double hydrophilic diblock copolymers

For the first time, the polyelectrolyte complex (PEC) formation tool was used for preparation of core‐shell nanoparticles form the natural polyampholyte N‐carboxyethylchitosan (CECh) and weak polycationic (protonated) polyoxyethylene‐b‐poly[2‐(dimethyl‐amino)ethyl methacrylate] (POE‐b‐PDMAEMA) diblock copolymers. The performed dynamic light scattering analyses revealed that nanoparticles with a PEC core and a POE shell could be formed at mixing ratio between the oppositely charged groups equal to 1/1 depending on CECh molar mass, polymerization degree of PDMAEMA block and ionic strength. The results were confirmed by the performed AFM and cryo‐TEM analyses. When high molar mass CECh was used, core‐shell nanoparticles were obtained with the diblock copolymer of the shortest PDMAEMA block at ionic strength (I) of 0.01. At ionic strength value close to the physiological one (I = 0.1) secondary aggregation occurred. Spherical nanoparticles at I = 0.1 were obtained upon lowering the CECh molar mass. Depending on the polymer partners and medium parameters the size of the obtained particles varied from 60 to 600 nm. The X‐ray photoelectron spectra evidenced the hydrophilic POE‐block shell—coacervate CECh/PDMAEMA‐block core structure. The nanoparticles are stable in a rather narrow pH range around 7.0, thus revealing the high pH‐sensitivity of the obtained core‐shell particles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2105–2117, 2009     

Effects of surfactants on the phase transition of poly(N-isopropylacrylamide) in water

The effects of both anionic (sodium dodecyl sulfate, SDS) and cationic (dodecylpyridine bromide, DPB) surfactants on the phase transition of narrowly distributed poly(N-isopropylacrylamide) (PNIPAM) microgel particles were investigated by laser light scattering. The addition of SDS swells the particles and increases the phase transition temperature, while DPB has a much smaller effect. This difference cannot be due to an association between the surfactant hydrophobic tail and PNIPAM because DPB and SDS have an identical hydrophobic tail. The amide groups in PNIPAM are slightly protonized in deionized water (pH ∼ 5.5). Our results contradict a previous prediction that oppositely charged surfactants will collapse a polyelectrolyte gel. After adding SDS, a two-step phase transition of the PNIPAM gel is observed. This suggests that SDS forms micelles inside the microgel with the help of the immobilized counter ions on the gel network. The SDS micelles are broken into individual SDS molecules in the first step of phase transition, while in the second step individual SDS molecules are gradually expelled. Surfactant effects on the microgel particles are compared with those of individual PNIPAM chains. © 1996 John Wiley & Sons, Inc.     

Thermal control over the electrophoresis of soft colloidal particles

We study the electrophoresis of surface-charged thermosensitive microgel particles based on poly-N-isopropylacrylamide (PNIPAM); these deswell with increasing temperature T. Our results show that the electrophoretic mobility mu is affected by the temperature-induced volume phase transition. It increases with increasing temperature, as a result of the charge density increase induced by particle deswelling. Temperature thus allows control of mu, in contrast to the more conventional charged hard spheres for which mu is T independent. Salt also affects the mu behavior and gives rise to rich phenomenology, sharing common characteristics with charged hard spheres and polyelectrolyte-coated colloids depending on whether the microgels are swollen or deswollen. We interpret the effects of salt concentration n by considering that particle charges are located in an external shell, as confirmed by titrations, and that it is this shell-salt-induced compression that affects the resulting mu behavior.     

Imaging the volume transition in thermosensitive core-shell particles by cryo-transmission electron microscopy

We report a study of colloidal thermosensitive core-shell particles by cryo-transmission electron microscopy (cryo-TEM). The particles consist of a solid core of poly(styrene), onto which a network of cross-linked poly(N-isopropylacrylamide) (PNIPAM) is affixed. In water, the shell of these particles swells when the temperature is low. Raising the temperature above 32 degrees C leads to a marked shrinking of the shell. In this letter, we present the first study of these core-shell particles by cryo-TEM in situ, that is, in aqueous solution. We demonstrate that the core-shell particles are well-defined and exhibit a narrow size distribution. In particular, the PNIPAM shell is compact and has a defined outer surface of a slightly irregular shape. The micrographs show that there are density fluctuations within the network. Cryo-TEM of the system above and below the transition temperature furnishes information about the thermosensitive particles that had not been available through other methods employed in previous investigations.     

Effect of poly(ethylene oxide)-silane graft molecular weight on the colloidal properties of iron oxide nanoparticles for biomedical applications

The size, charge, and stability of colloidal suspensions of magnetic nanoparticles with narrow size distribution and grafted with poly(ethylene glycol)-silane of different molecular weights were studied in water, biological buffers, and cell culture media. X-ray photoelectron spectroscopy provided information on the chemical nature of the nanoparticle surface, indicating the particle surfaces consisted of a mixture of amine groups and grafted polymer. The results indicate that the exposure of the amine groups on the surface decreased as the molecular weight of the polymer increased. The hydrodynamic diameters correlated with PEG graft molecular weight and were in agreement with a distributed density model for the thickness of a polymer shell end-grafted to a particle core. This indicates that the particles obtained consist of single iron oxide cores coated with a polymer brush. Particle surface charge and hydrodynamic diameter were measured as a function of pH, ionic strength, and in biological buffers and cell culture media. DLVO theory was used to analyze the particle stability considering electrostatic, magnetic, steric, and van der Waals interactions. Experimental results and colloidal stability theory indicated that stability changes from electrostatically mediated for a graft molecular weight of 750 g/mol to sterically mediated at molecular weights of 1000 g/mol and above. These results indicate that a graft molecular weight above 1000 g/mol is needed to produce particles that are stable in a wide range of pH and ionic strength, and in cell culture media.     

AuNPs/PNIPAM复合颗粒的制备及其温敏性质

将金纳米颗粒(AuNPs)组装到聚N-异丙基丙烯酰胺(PNIPAM)水凝胶微球表面制备出AuNPs/PNIPAM复合颗粒. 将PNIPAM 凝胶的温敏特性与AuNPs的光学性质结合, 通过改变温度调节AuNPs的局部表面等离子共振(LSPR)吸收峰位置. 研究结果表明, 温度升高使AuNPs的LSPR吸收峰发生红移, 并且这种效应是可逆的. 同时发现, AuNPs的光学性质还可以作为表征PNIPAM水凝胶微球温敏行为的一种手段. 利用透射电镜、紫外-可见光谱仪及动态光散射仪对AuNPs/PNIPAM复合颗粒的形貌、光学性质、粒径变化等进行了分析.