Proton affinities of ketones, vicinal diketones and α-keto esters: a computational study

The proton affinities of seven different ketones, vicinal diketones, and α-keto esters (acetophenone, 2,2,2-trifluoroacetophenone, 2,3-butanedione, 1-phenyl-1,2-propanedione, methyl pyruvate, ethyl benzoylformate, and ketopantolactone) have been evaluated theoretically using the conventional ab initio HF and several post-HF methods (MP2, MP4, CCSD), density functional methods with the B3LYP hybrid functional, as well as some ab initio model chemistries [CBS-4M, G2(MP2), and G3(MP2)//B3LYP]. The chemical compounds studied are frequently used substrates in the asymmetric hydrogenation over chirally modified platinum catalysts where the protonation properties of the chiral modifier and the substrates are of great interest. In most cases, the proton affinities (PAs) evaluated with the CCSD/6-311+G(d,p)//B3LYP/TZVP and G2(MP2) methods are in good agreement with the existing experimental ones. However, the previously reported PA of 2,3-butanedione seems to be too high by 10-15 kJ mol⁻¹. The B3LYP/TZVP//B3LYP/TZVP and MP2/6-311+G(d,p)//B3LYP/TZVP model chemistries predict proton affinities that are systematically higher and lower than the experimental PAs, respectively. If proton affinities are evaluated as the average of the PAs calculated with these two theoretical methods a very good agreement with the experimental results is obtained. The mean absolute deviation (MAD) from experiment of this combination method for the PAs of 13 test molecules is 4.0 kJ mol⁻¹. For 9 molecules composed only of first-row atoms the MAD is 2.5 kJ mol⁻¹. The B3LYP/TZVP//B3LYP/TZVP and MP2/6-311+G(d,p)//B3LYP/TZVP methods provide significant savings in computational time and disk space compared to the CCSD/6-311+G(d,p)//B3LYP/TZVP and G2(MP2) models. Therefore, it is suggested that if no experimental or highly accurate theoretical data is available (due to computational cost), the proton affinities of similar compounds as investigated in this paper, can be evaluated with the combination method. For the studied molecules, this method gives the following PAs (in kJ mol⁻¹): 788 (2,3-butanedione, exptl 802); 798 (2,2,2-trifluoroacetophenone, exptl 799); 811 (ketopantolactone); 813 (methyl pyruvate); 825 (1-phenyl-1,2-propanedione); 862 (acetophenone, exptl 861); 865 (ethyl benzoylformate).     

Electron affinities of uracil: microsolvation effects and polarizable continuum model

We present adiabatic electron affinities (AEAs) and the vertical detachment energies (VDEs) of the uracil molecule interacting with one to five water molecules. Credibility of MP2 and DFT/B3LYP calculations is supported by comparison with available benchmark CCSD(T) data. AEAs and VDEs obtained by MP2 and DFT/B3LYP methods copy trends of benchmark CCSD(T) results for the free uracil and uracil-water complexes in the gas phase being by 0.20 - 0.28 eV higher than CCSD(T) values depending on the particular structure of the complex. AEAs and VDEs from MP2 are underestimated by 0.09-0.15 eV. For the free uracil and uracil-(H(2)O)(n) (n = 1,2,3,5) complexes, we also consider the polarizable continuum model (PCM) and discuss the importance of the microsolvation when combined with PCM. AEAs and VDEs of uracil and uracil-water complexes enhance rapidly with increasing relative dielectric constant (ε) of the solvent. Highest AEAs and VDEs of the U(H(2)O)(5) complexes from B3LYP with ε = 78.4 are 2.03 and 2.81 eV, respectively, utilizing the correction from CCSD(T). Specific structural features of the microsolvated uracil-(H(2)O)(n) complexes and their anions are preserved also upon considering PCM in calculations of AEAs and VDEs.     

Benchmark calculations on the adiabatic ionization potentials of M-NH(3) (M=Na,Al,Ga,In,Cu,Ag)

The ground states of the M-NH(3) (M=Na,Al,Ga,In,Cu,Ag) complexes and their cations have been studied with density functional theory and coupled cluster [CCSD(T)] methods. The adiabatic ionization potentials (AIPs) of these complexes are calculated, and these are compared to results from high-resolution zero-electron kinetic energy photoelectron spectroscopy. By extrapolating the CCSD(T) energies to the complete basis set (CBS) limit and including the core-valence, scalar relativistic, spin-orbit, and zero-point corrections, the CCSD(T) method is shown to be able to predict the AIPs of these complexes to better than 6 meV or 0.15 kcal/mol. 27 exchange-correlation functionals, including one in the local density approximation, 13 in the generalized gradient approximation (GGA), and 13 with hybrid GGAs, were benchmarked in the calculations of the AIPs. The B1B95, mPW1PW91, B98, B97-1, PBE1PBE, O3LYP, TPSSh, and HCTH93 functionals give an average error of 0.1 eV for all the complexes studied, with the B98 functional alone yielding a maximum error of 0.1 eV. In addition, the calculated metal-ammonia harmonic stretching frequencies with the CCSD(T) method are in excellent agreement with their experimental values, whereas the B3LYP method tends to underestimate these stretching frequencies. The metal-ammonia binding energies were also calculated at the CCSD(T)/CBS level, and are in excellent agreement with the available experimental values considering the error limits, except for Ag-NH(3) and Ag(+)-NH(3), where the calculations predict stronger bond energies than measured by about 4 kcal/mol, just outside the experimental error bars of +/-3 kcal/mol.     

亚烷基锡烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet alkylidenestannylene and ethylene has been investigated with MP2/3-21 G^* and B3LYP/3-21 G* methods, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD(T)//MP2/3-2 IG^* and CCSD(T)//B3LYP/3-21G^* methods, respectively. The results show that the dominant reaction pathway of the cycloaddition is that an intermediate (INT) is firstly formed between the two reactants through a barrier-free exothermic reaction of 39.7 kJ/mol, and the intermediate then isomerizes to a four-membered ring product (P2.1) via a transition state TS2.1 with a barrier of 66.8 kJ/mol.     

A coupled-cluster study of the structure and vibrational spectra of pyrazole and imidazole

Harmonic force fields were calculated at the corresponding optimized geometries for pyrazole and imidazole at the HF, B3LYP, MP2, CCSD and CCSD(T) levels using the 6-31G* basis set and at the HF and B3LYP levels using the cc-pVTZ basis set. The agreement between the calculated and experimental geometries by the CCSD and CCSD(T) methods was generally similar to that obtained with the B3LYP and MP2 methods. The force fields were scaled using one-scale-factor (1SF), 3SF and 7SF scaling schemes. The scale factors were varied with respect to the experimental frequencies. Using 7SF scaling, the root-mean-square (RMS) deviation of the calculated frequencies from the experimental frequencies by the HF, B3LYP, MP2, CCSD and CCSD(T) methods and the 6-31G* basis set was 16, 7, 13, 11 and 11 cm(-1), respectively. This shows that the B3LYP method is preferred for force field calculations over the perturbative MP2, CCSD and CCSD(T) methods. Using 1SF scaling, the CCSD(T) scale factor was 0.931, the highest among the five methods used but close to that obtained with the B3LYP method and the cc-pVTZ basis set with lower RMS deviation.     

On the flexibility of beta-peptides

The full conformational space was explored for an achiral and two chiral beta-peptide models: namely For-beta-Ala-NH2, For-beta-Abu-NH2, and For-beta-Aib-NH2. Stability and conformational properties of all three model systems were computed at different levels of theory: RHF/3-21G, B3LYP/6-311++G(d,p)//RHF/3-21G, B3LYP/6-311++G(d,p), MP2//B3LYP/6-311++G(d,p), CCSD//B3LYP/6-311++G(d,p), and CCSD(T)//B3LYP/6-311++G(d,p). In addition, ab initio E = E(phi, micro, psi) potential energy hypersurfaces of all three models were determined, and their topologies were analyzed to determine the inherent flexibility properties of these beta-peptide models. Fewer points were found and assigned than expected on the basis of Multidimensional Conformational Analysis (MDCA). Furthermore, it has been demonstrated, that the four-dimensional surface, E = E(phi, mu, psi), can be reduced into a three-dimensional one: E = E[phi, f(phi), psi]. This reduction of dimensionality of freedom of motion suggests that beta-peptides are less flexible than one would have thought. This agrees with experimental data published on the conformational properties of peptides composed of beta-amino acid residues.     

亚甲基硅烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet methylidenesilene and ethylene has been investigated with MP2/6-31G^＊ and B3LYP/6-31G^＊ methods, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies of the involved conformers were calculated by CCSD（T）//MP2/6-31G＊ and CCSD（T）//B3LYP/6-31 G＊ methods, respectively. The results show that the dominant reaction pathway of the cycloaddition reaction is that a complex intermediate is firstly formed between the two reactants through a barrier-free exothermic reaction of 13.3 kJ/mol, and the complex is then isomefized to a four-membered ring product P2,1 via a transition state TS2.1 with a barrier of 32.0 kJ/mol.     

Computational methods to calculate accurate activation and reaction energies of 1,3-dipolar cycloadditions of 24 1,3-dipoles

Theoretical calculations were performed on the 1,3-dipolar cycloaddition reactions of 24 1,3-dipoles with ethylene and acetylene. The 24 1,3-dipoles are of the formula X≡Y(+)-Z(-) (where X is HC or N, Y is N, and Z is CH(2), NH, or O) or X═Y(+)-Z(-) (where X and Z are CH(2), NH, or O and Y is NH, O, or S). The high-accuracy G3B3 method was employed as the reference. CBS-QB3, CCSD(T)//B3LYP, SCS-MP2//B3LYP, B3LYP, M06-2X, and B97-D methods were benchmarked to assess their accuracies and to determine an accurate method that is practical for large systems. Several basis sets were also evaluated. Compared to the G3B3 method, CBS-QB3 and CCSD(T)/maug-cc-pV(T+d)Z//B3LYP methods give similar results for both activation and reaction enthalpies (mean average deviation, MAD, < 1.5 kcal/mol). SCS-MP2//B3LYP and M06-2X give small errors for the activation enthalpies (MAD < 1.5 kcal/mol), while B3LYP has MAD = 2.3 kcal/mol. SCS-MP2//B3LYP and B3LYP give the reasonable reaction enthalpies (MAD < 5.0 kcal/mol). The B3LYP functional also gives good results for most 1,3-dipoles (MAD = 1.9 kcal/mol for 17 common 1,3-dipoles), but the activation and reaction enthalpies for ozone and sulfur dioxide are difficult to calculate by any of the density functional methods.     

Conformationally averaged vertical detachment energy of finite size NO3(-)·nH2O clusters: a route connecting few to many

We report conformationally averaged VDEs (VDE(w)(n)) for different sizes of NO(3)(-)·nH(2)O clusters calculated by using uncorrelated HF, correlated hybrid density functional (B3LYP, BHHLYP) and correlated ab intio (MP2 and CCSD(T)) theory. It is observed that the VDE(w)(n) at the B3LYP/6-311++G(d,p), B3LYP/Aug-cc-Pvtz and CCSD(T)/6-311++G(d,p) levels is very close to the experimentally measured VDE. It is shown that the use of calculated results of the conformationally averaged VDE for small-sized solvated negatively-charged clusters and a microscopic theory-based general expression for the same provides a route to obtain the VDE for a wide range of cluster sizes, including bulk.     

Cheletropic decomposition of cyclic nitrosoamines revisited: the nature of the transition states and a critical role of the ring strain

The cheletropic decompositions of 1-nitrosoaziridine (1), 1-nitroso-Delta(3)-pyrroline (2), 7-nitroso-7-azabicyclo[2.2. 1]hepta-2,5-diene (3), and 6-nitroso-6-azabicyclo[2.1.1]hexa-4-ene (4) have been studied theoretically using high level ab initio computations. Activation parameters of the decomposition of nitrosoaziridine 1 were obtained experimentally in heptane (DeltaH()(298) = 18.6 kcal mol(-)(1), DeltaS()(298) = -7.6 cal mol(-)(1) K(-)(1)) and methanol (20.3 kcal mol(-)(1), 0.3 cal mol(-)(1) K(-)(1)). Among employed theoretical methods (B3LYP, MP2, CCD, CCSD(T)//CCD), the B3LYP method in conjunction with 6-31+G, 6-311+G, and 6-311++G(3df,2pd) basis sets gives the best agreement with experimental data. It was found that typical N-nitrosoheterocycles 2-4 which have high N-N bond rotation barriers (>16 kcal mol(-)(1)) extrude nitrous oxide via a highly asynchronous transition state with a planar ring nitrogen atom. Nitrosoaziridine 1, with a low rotation barrier (<9 kcal mol(-)(1)) represents a special case. This compound can eliminate N(2)O via a low energy linear synperiplanar transition state (DeltaH()(298) = 20.6 kcal mol(-)(1), DeltaS()(298) = 2.5 cal mol(-)(1) K(-)(1)). Two higher energy transition states are also available. The B3LYP activation barriers of the cheletropic fragmentation of nitrosoheterocycles 2-4 decrease in the series: 2 (58 kcal mol(-)(1)) > 3 (18 kcal mol(-)(1)) > 4 (12) kcal mol(-)(1). The relative strain energies increase in the same order: 2 (0 kcal mol(-)(1)) < 3 (39 kcal mol(-)(1)) < 4 (52 kcal mol(-)(1)). Comparison of the relative energies of 2-4 and their transition states on a common scale where the energy of nitrosopyrroline 2 is assumed as reference indicates that the thermal stability of the cyclic nitrosoamines toward cheletropic decomposition is almost entirely determined by the ring strain.     

Theoretical study on stability and properties of NC2O isomers

The structures, energetics, spectroscopies, and stabilities of the doublet NC(2)O radical are explored at density functional theory and ab initio levels. Nine minimum isomers are located connected by 22 interconversion transition states. At the CCSD(T)/6-311+G(2df)//QCISD/6-311G(d)+ZPVE level, the lowest-lying isomer is bent NCCO 1 (0.0 kcal/mol) with (2)A' state followed by bent isomer CNCO 2 (16.7). Two isomers (1 and 2) and another high-lying species CCNO 4 (99.4) with bent structure are considerably stabilized by a barrier of at least 20 kcal/mol. All of the three isomers should be experimentally or astrophysically observable. This result is consistent with their indication of neutralization-reionization mass spectrometry experiments. Also, the calculated spectroscopic properties and bond distances of known NCCO 1 are consistent with recent experimental observations and theoretical studies. The bonding natures of the isomers 1, 2, and 4 are analyzed. Their molecular properties including the heats of formation, adiabatic ionization potentials, and adiabatic electronic affinities are calculated at the higher levels G3//B3LYP, G3(MP2)//B3LYP, QCISD, and CCSD(T) (single-point). Possible formation strategies of the isomers 1, 2, and 4 in laboratory and space are also discussed in detail.     

亚甲基氰自由基(HCCN)与一氧化氮(NO)反应势能面的理论研究

在CCSD(T)/6-311G(d,p)//B3LYP/6-311G(d,p)+ZPE水平上对反应HCCN+NO的二重态反应势能面进行了计算,得到了4种产物:P1(HCN+NCO),P2(OH+NCCN),P₃[HCN+(CNO)]和P4(HCN+CNO).其中产物P1为主要产物,P2为次要产物,P₃和P4很难得到.在G2(B3LYP/MP2/CC)水平,对产物P1和P2的反应通道的单点能量进行了校正.     

Ab initio calculation of bowl, cage, and ring isomers of C20 and C20-

High-level ab initio calculations have been carried out to reexamine relative stability of bowl, cage, and ring isomers of C(20) and C(20)(-). The total electronic energies of the three isomers show different energy orderings, strongly depending on the hybrid functionals selected. It is found that among three popular hybrid density-functional (DF) methods B3LYP, B3PW91, PBE1PBE, and a new hybrid-meta-DF method TPSSKCIS, only the PBE1PBE method (with cc-pVTZ basis set) gives qualitatively correct energy ordering as that predicted from ab initio CCSD(T)/cc-pVDZ [CCSD(T)-coupled-cluster method including singles, doubles, and noniterative perturbative triples; cc-pVDZ-correlation consistent polarized valence double zeta] as well as from MP4(SDQ)/cc-pVTZ [MP4-fourth-order Moller-Plesset; cc-pVTZ-correlation consistent polarized valence triple zeta] calculations. Both CCSD(T) and MP4 calculations indicate that the bowl is most likely the global minimum of neutral C(20) isomers, followed by the fullerene cage and ring. For the anionic counterparts, the PBE1PBE calculation also agrees with MP4/cc-pVTZ calculation, both predicting that the bowl is still the lowest-energy structure of C(20)(-) at T=0 K, followed by the ring and the cage. In contrast, both B3LYP/cc-pVTZ and B3PW91/cc-pVTZ calculations predict that the ring is the lowest-energy structure of C(20)(-). Apparently, this good reliability in predicting the energy ordering renders the hybrid PBE method a leading choice for predicting relative stability among large-sized carbon clusters and other carbon nanostructures (e.g., finite-size carbon nanotubes, nano-onions, or nanohorns). The relative stabilities derived from total energy with Gibbs free-energy corrections demonstrate a changing ordering in which ring becomes more favorable for both C(20) and C(20)(-) at high temperatures. Finally, photoelectron spectra (PES) for the anionic C(20)(-) isomers have been computed. With binding energies up to 7 eV, the simulated PES show ample spectral features to distinguish the three competitive C(20)(-) isomers.     

Density functional theory and post-Hartree-Fock studies on molecular structure and harmonic vibrational spectrum of formaldehyde

Density functional theory (DFT) with the Becke's three-parameter exchange correlation functional and the functional of Lee, Yang and Parr, gradient-corrected functionals of Perdew, and Perdew and Wang [the DFT(B3LYP), DFT(B3P86) and DFT(B3PW91) methods, respectively], and several levels of conventional ab initio post-Hartree-Fock theory (second- and fourth-order perturbation theory M?ller-Plesset MP2 and MP4(SDTQ), coupled cluster with the single and double excitations (CCSD), and CCSD with perturbative triple excitation [CCSD(T)], configuration interaction with the single and double excitations [CISD], and quadratic configuration interaction method [QCISD(T)], using several basis sets [ranging from a simple 6-31G(d,p) basis set to a 6-311+ +G(3df, 2pd) one], were applied to study of the molecular structure (geometrical parameters, rotational constants, dipole moment) and harmonized infrared (IR) spectrum of formaldehyde (CH₂O). High-level ab initio methods CCSD(T) and QCISD(T) with the 6-311+ +G(3df, 2pd) predict correctly molecular parameters, vibrational harmonic wavenumbers and the shifts of the harmonic IR spectrum of ¹²CH₂ ¹⁶O upon isotopic substitution. Received: 30 January 1997 / Accepted: 7 May 1997     

Peptide models. XXXIII. Extrapolation of low-level Hartree-Fock data of peptide conformation to large basis set SCF,MP2, DFT,and CCSD(T) results. The Ramachandran surface of alanine dipeptide computed at various levels of theory

At the dawn of the new millenium, new concepts are required for a more profound understanding of protein structures. Together with NMR and X-ray-based 3D-structure determinations in silico methods are now widely accepted. Homology-based modeling studies, molecular dynamics methods, and quantum mechanical approaches are more commonly used. Despite the steady and exponential increase in computational power, high level ab initio methods will not be in common use for studying the structure and dynamics of large peptides and proteins in the near future. We are presenting here a novel approach, in which low- and medium-level ab initio energy results are scaled, thus extrapolating to a higher level of information. This scaling is of special significance, because we observed previously on molecular properties such as energy, chemical shielding data, etc., determined at a higher theoretical level, do correlate better with experimental data, than those originating from lower theoretical treatments. The Ramachandran surface of an alanine dipeptide now determined at six different levels of theory [RHF and B3LYP 3-21G, 6-31+G(d) and 6-311++G(d,p)] serves as a suitable test. Minima, first-order critical points and partially optimized structures, determined at different levels of theory (SCF, DFT), were completed with high level energy calculations such as MP2, MP4D, and CCSD(T). For the first time three different CCSD(T) sets of energies were determined for all stable B3LYP/6-311++G(d,p) minima of an alanine dipeptide. From the simplest ab initio data (e.g., RHF/3-21G) to more complex results [CCSD(T)/6-311+G(d,p)//B3LYP/6-311++G(d,p)] all data sets were compared, analyzed in a comprehensive manner, and evaluated by means of statistics.     

Quantum chemical study of the hydrogen-bonded HXeOH–H2O complex

A combined MP2 and DFT/B3LYP study of the HXeOH–H₂O complex is presented. These computational methods have been used to extract information on the structural, energetical and vibrational properties of the complex. Additionally, we have applied anharmonic vibrational calculations based on the MP2-computed intermolecular potential energy surface. Large perturbations both on the subunit structures and their fundamental vibrational modes are found upon complexation. Large changes of anharmonicity of the HXeOH subunit reflects the perturbation of the molecule's electronic structure. The computed BSSE-corrected interaction energies are −40.23 and −38.94 kJ mol⁻¹ at the CCSD(T)//MP2 and CCSD(T)//B3LYP levels of theory, respectively. The estimated deformation energy contribution to the interaction energy is about 5%, which is very large compared with classical hydrogen-bonded complexes. The topological analysis of the Electron Localization Function (ELF) was applied to study further the hydrogen-bonded interaction between the two complex partners. The obtained interaction pattern suggests that the interaction between HXeOH and H₂O is a typical hydrogen bond interaction driven mainly by electrostatic interactions.     

A theoretical study of the H-abstraction reactions from HOI by moist air radiolytic products (H, OH, and O (3P)) and iodine atoms (2P(3/2))

The rate constants of the reactions of HOI molecules with H, OH, O ((3)P), and I ((2)P(3/2)) atoms have been estimated over the temperature range 300-2500 K using four different levels of theory. Geometry optimizations and vibrational frequency calculations are performed using MP2 methods combined with two basis sets (cc-pVTZ and 6-311G(d,p)). Single-point energy calculations are performed with the highly correlated ab initio coupled cluster method in the space of single, double, and triple (pertubatively) electron excitations CCSD(T) using the cc-pVTZ, cc-pVQZ, 6-311+G(3df,2p), and 6-311++G(3df,3pd) basis sets. Reaction enthalpies at 0 K were calculated at the CCSD(T)/cc-pVnZ//MP2/cc-pVTZ (n = T and Q), CCSD(T)/6-311+G(3df,2p)//MP2/6-311G(d,p), and CCSD(T)/6-311++G(3df,3pd)//MP2/6-311G(d,p) levels of theory and compared to the experimental values taken from the literature. Canonical transition-state theory with an Eckart tunneling correction is used to predict the rate constants as a function of temperature. The computational procedure has been used to predict rate constants for H-abstraction elementary reactions because there are actually no literature data to which the calculated rate constants can be directly compared. The final objective is to implement kinetics of gaseous reactions in the ASTEC (accident source term evaluation code) program to improve speciation of fission products, which can be transported along the reactor coolant system (RCS) of a pressurized water reactor (PWR) in the case of a severe accident.     

A new non-symmetric N(OH)3 species: Comparison with the C3 species and thermochemistry at the HF,DFT, MP2, MP4 and CCSD(T) levels of theory

A new non-symmetric N(OH)₃ species more stable than the C₃ structure is found at Density Functional Theory (B3PW91, B3LYP), MP2, MP4 and CCSD(T) levels with extended basis sets. C₁ and C₃ structures are qualitatively different from those of the As(OH)₃ molecule. Energy differences and interconversion barriers become smaller with increasing inclusion of electronic correlation. However at the MP2, MP4 and CCSD(T) levels, these differences increase with basis set quality. ZPE corrections lead to barrier collapse but only at the CCSD(T)/AVTZ level. The C₁ and C₃ MP2/AVTZ infrared spectra are given for future studies.