Wavelength tunable linear cavity cladding pump Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>co-doped fiber laser operating in L-band

We have demonstrated a novel tunable linear cavity Er³⁺/Yb³⁺ co-doped fiber laser, which utilizes amplified spontaneous emission as a secondary pump source so that it can operate in L-band. The tuning wavelength range can be up to 34 nm, from 1588.6 to 1622.6 nm, and the output power excursion of the laser at different wavelengths can be less than 0.4 dB by using a two sections of high-birefringence fiber loop mirror as the wavelength filter. The high output power of 200 mW is realized by using the cladding-pump.     

504 nm blue-green laser based on sum-frequency mixing of diode pumped Nd<Superscript>3+</Superscript> lasers

We report for the first time a continuous-wave (CW) blue-green radiation at 504 nm by intracavity sum-frequency generation of 946 nm Nd:YAG laser and 1080 nm Nd:YAlO₃ (Nd:YAP) laser. Using type-I critical phase matching LiB₃O₅ (LBO) crystal, 504 nm blue-green laser was obtained by 946 and 1080 nm intra-cavity sum-frequency mixing, and output power of 215 mW was demonstrated. At the output power level of 215 mW, the output power stability is better than 4.7% and laser beam quality M² factor is 1.21.     

Diode-pumped CW Nd<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript> laser at 1339 nm

A diode-pumped Nd³⁺:YAlO₃ (Nd:YAP) laser emitting at 1339 nm is described. At the incident pump power of 17.8 W, as high as 3.4 W of continuous-wave (CW) output power at 1339 nm is achieved. The slope efficiency with respect to the incident pump power was 23.6%. The output power stability over 60 min is better than 3.5%. The laser beam quality M ² factor is 1.33.     

Passive picosecond and femtosecond mode-locking laser action of Yb<Superscript>3+</Superscript>:LuYSiO<Subscript>5</Subscript>

Efficient passive mode locking of a diode-pumped Yb³⁺:LuYSiO₅ (Yb:LYSO) laser is first demonstrated in experiment using a semiconductor saturable absorber mirror (SESAM), to the best of our knowledge. A stable pulse train with a repetition rate of 101 MHz is generated. The average output power of 2.13 W and the pulse duration of 3.9 ps. With a pair of SF10 uncoated prisms for dispersion compensation, we obtained pulses as short as 780 fs with center wavelength around 1042 nm, the average output power of 1.03 W and the peak power of 13.1 kW.     

Continuous wave laser operation of Yb<Superscript>3+</Superscript>:YVO<Subscript>4</Subscript>

We have demonstrated the continuous wave laser operation of Yb³⁺:YVO₄. For Ti:Al₂O₃ laser pumping at 985 nm, a maximum slope efficiency of 41.1% and a threshold pump power of 76 mW were obtained. The maximum output power was 433 mW at a laser wavelength of 1037 nm.Using a cw diode laser around 974 nm as a pump source, a slope efficiency of 10.9% and a maximum output power of 152 mW were achieved at a laser wavelength of 1039 nm. The laser threshold pump power was 608 mW with respect to the absorbed pump power. The effective emission cross-sections for the ²F_5/2²F_7/2 transition were determined using the Füchtbauer–Ladenburg equation. The maxima of the effective absorption and emission cross-sections were found at 984.5 nm (6.74×10^-20 cm²) in -po larization and 985.5 nm (4.28×10^-20 cm²) also in -p olarization. The upper laser level lifetime was measured with suppression of radiation trapping and is around 318 s. PACS 42.55.Rz; 42.55.Xi; 42.70.Hj     

Diode-pumped Nd<Superscript>3+</Superscript>:YAl<Subscript>3</Subscript>(BO<Subscript>3</Subscript>)<Subscript>4</Subscript> laser at 1338 nm

A high-power diode -pumped Nd³⁺:YAl₃(BO₃)₄ (Nd:YAB) laser emitting at 1338 nm is described. At the incident pump power of 9.8 W, as high as 734 mW of continuous-wave (CW) output power at 1338 nm is achieved. The slope efficiency with respect to the incident pump power was 9.0%. To the best of our knowledge, this is the first demonstration of such a laser system. The output power stability over 60 min is better than 2.6%. The laser beam quality M ² factor is 1.21.     

Simultaneous dual-wavelength CW laser operation at 1064 and 930 nm in Nd<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript>

A dual-wavelength continuous-wave (CW) diode end-pumped Nd³⁺:YAlO₃ (Nd:YAP) laser that generates simultaneous laser action at the wavelengths 1064 and 930 nm is demonstrated. A total output power of 2.15 W (1.57 W at 1064 nm and 0.58 W at 930 nm) for the dual-wavelength was achieved at the incident pump power of 17.8 W with optical conversion efficiency of 12.1%. The M ² values for 930 and 1064 nm lights were found to be around 1.21 and 1.32, respectively.     

Diode-pumped continuous-wave Nd<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript> intracavity-doubled red laser

It is reported that efficient continuous-wave (CW) red laser generation at 670 nm in a LBO crystal at type-I phase matching direction performed with a diode-pumped Nd³⁺:YAlO₃ (Nd:YAP) laser. With incident pump power of 15.6 W, output power of 273 mW at 670 nm has been obtained using a 10 mm-long LBO crystal. At the output power level of 273 mW, the output stability is better than 3.7%.     

Diode-pumped Pr<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript>/LBO violet laser at 374 nm

We report a diode-pumped Pr³⁺:YAlO₃ laser emitting at 747 nm. A power of 232 mW at 747 nm has been achieved in continuous-wave operation with a diode emitting 2 W at 448 nm. Furthermore, intracavity second-harmonic generation in continuous-wave mode has also been demonstrated with a power of 52 mW at 374 nm by using a LBO nonlinear crystal. The fluctuation of the violet output power was better than 2.3%. The beam quality M ² value is 2.2.     

Quasi-three level laser based on diode-pumped Nd<Superscript>3+</Superscript>:YAlO<Subscript>3</Subscript> crystal

We describe the output performances of the 930 nm ⁴ F _3/2 → ⁴ I _9/2 transition in Nd³⁺:YAlO₃ (Nd:YAP) under in-band pumping with diode laser at the 803 nm wavelength. An end-pumped Nd:YAP crystal yielded 1.13 W of continuous-wave (CW) output power for 17.8 W of incident pump power. Moreover, intracavity second-harmonic generation has also been achieved with a power of 172 mW at 465 nm by using a LiB₃O₅ (LBO) nonlinear crystal. The blue beam quality factor M ² was less than 1.3. The blue power stability was less 3% in 60 min.     

Diode pumped Pr<Superscript>3+</Superscript>:LiYF<Subscript>4</Subscript>-BBO ultraviolet laser at 320 nm

A diode pumped Pr³⁺:LiYF₄ laser at 639.5 nm has been demonstrated. With an incident pump power of 920 mW, the maximum red output power was 272 mW. Moreover, intracavity second-harmonic generation (SHG) has also been achieved with a maximum ultraviolet power of 23 mW by using a β-BaB₂O₄ (BBO) nonlinear crystal. To the best of our knowledge, this is the first report on continuous-wave ultraviolet generation by intracavity frequency doubling Pr³⁺:LiYF₄ laser.     

494 nm blue laser based on sum-frequency mixing of diode pumped Nd<Superscript>3+</Superscript> lasers

We report for the first time a continuous-wave (CW) blue radiation at 494 nm by intracavity sumfrequency generation of 912 nm Nd:GdVO₄ laser and 1079 nm Nd:YAlO₃ (Nd:YAP) laser. Using type-I critical phase matching LiB₃O₅ (LBO) crystal, 494 nm blue laser was obtained by 912 and 1079 nm intra-cavity sum-frequency mixing, and output power of 179 mW was demonstrated. At the output power level of 179 mW, the output power stability is better than 3.5% and laser beam quality M ₂ factor is 1.21.     

Diode-pumped CW Nd:YAG laser at 1116 nm based on the <Superscript>4</Superscript><Emphasis Type="Italic">F</Emphasis><Subscript>3/2</Subscript>-<Superscript>4</Superscript><Emphasis Type="Italic">I</Emphasis><Subscript>11/2</Subscript> transition

We describe the output performances of the 1116 nm ⁴ F _3/2-⁴ I _11/2 transition (generally used for a 1064 nm transition) in Nd:YAG under in-band pumping with diode laser at the 809 nm wavelength. An end-pumped Nd:YAG crystal yielded 680 mW of continuous-wave (CW) output power for 18.2 W of incident pump power. Moreover, intracavity second-harmonic generation (SHG) has also been achieved with a power of 97 mW at 558 nm by using a LiB₃O₅ (LBO) nonlinear crystal. The yellow-green beam quality factor M ² was less than 1.21. The yellow-green power stability was less 2.5% in 4 h.     

Diode-pumped CW Nd:YAG laser at 1356 nm based on the <Superscript>4</Superscript><Emphasis Type="Italic">F</Emphasis><Subscript>3/2</Subscript>-<Superscript>4</Superscript><Emphasis Type="Italic">I</Emphasis><Subscript>13/2</Subscript> transition

We describe the output performances of the 1356 nm ⁴ F _3/2-⁴ I _13/2 transition (generally used for a 1319 nm transition) in Nd:YAG under in-band pumping with diode laser at the 809 nm wavelength. An end-pumped Nd:YAG crystal yielded 1.02 W of continuous-wave (CW) output power for 18.2 W of incident pump power. Moreover, intracavity second-harmonic generation (SHG) has also been achieved with a power of 290 mW at 678 nm by using a LiB₃O₅ (LBO) nonlinear crystal. The red beam quality factor M ₂ was less than 1.37. The red power stability was less 3.2% in 4 h.     

CW and tunable laser operation of Yb<Superscript>3+</Superscript> doped CaF<Subscript>2</Subscript>

We present the spectroscopic properties and room temperature of a cw tunable laser operation with Yb³⁺ doped CaF₂ single crystals grown in our laboratory. A laser slope efficiency of 50% with respect to the absorbed 920 nm pump power was obtained, and the laser wavelength could be tuned between 1000 and 1060 nm. PACS 42.55R; 42.70An erratum to this article can be found at     

Spectroscopy,continuous-wave and <Emphasis Type="Italic">Q</Emphasis>-switched diode-pumped laser operation of Er<Superscript>3+</Superscript>,Yb<Superscript>3+</Superscript>:YVO<Subscript>4</Subscript> crystal

We report on the spectroscopy and, for the first time to our knowledge, continuous-wave and Q-switched diode-pumped laser operation of Er,Yb:YVO₄ crystal. Absorption and emission spectra of the crystal were determined. Lifetimes of Er^{3+ 4} I _13/2 and ⁴ I _11/2 levels that define laser performance of the crystal were measured and parameters of energy transfer between Yb³⁺ and Er³⁺ ions were estimated. cw output power of 115 mW with slope efficiency of 5.4% was achieved at 1604 nm. In the Q-switched mode an average output power of 81 mW with slope efficiency of 3.5% and pulse duration of 150 ns was obtained. In quasi-cw regime maximal peak power of 610 mW with slope efficiency of 6.7% was demonstrated. PACS 42.55.Xi; 42.60.Gd; 42.70.Hj     

A high efficiency Ho:YAlO<Subscript>3</Subscript> laser pumped by Tm:YLF laser with a Volume Bragg Grating

We report a CW Ho:YAlO₃ (Ho:YAP) laser at room temperature pumped by a Tm:YLF laser with a Volume Bragg Grating (VBG) instead of the conventional mirror. The Ho:YAP laser operated at 2117.9 nm with output power 9.12 W. The optical-to-optical conversion efficiency is 60.4% and slope efficiency is 71.2%. The Ho:YAP output wavelength is centered at 2117.9 nm with bandwidth of about 1 nm. The beam quality factor is M ² ∼ 1.29 measured by the traveling knife-edge method.     

Comparative Investigation on Nanocrystal Structure and Luminescence Properties of Gadolinium Molybdates Codoped with Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>

This paper reports on the comparative investigation of nanocrystal structure and luminescence properties of Er³⁺/Yb³⁺-codoped gadolinium molybdate nanocrystals Gd₂(MoO₄)₃ and Gd₂MoO₆ synthesized by the Pechini method with citric acid and ethylene glycol. Their crystallization, structure transformation, and morphologies have been investigated by X-ray diffraction, thermogravimetric/differential scanning calorimetry, and transmission electron microscopy. It is noticed that Er³⁺/Yb³⁺-codoped monoclinic Gd₂(MoO₄)₃ nanocrystals have shown an intense upconversion through a sintering of the organic complex precursor at 600°C. Furthermore, it transforms to orthorhombic Gd₂(MoO₄)₃ when the precursor is sintered at 900°C. In counterpart of monoclinic Gd₂MoO₆, however, the monoclinic structure remains unchanged when the precursor is sintered at a temperature ranging from 600°C to 900°C. Intense visible emissions of Er³⁺ attributed to the transitions of ²H_11/2, ⁴S_3/2–⁴I_15/2 at 520 and 550 nm, and ⁴F_9/2–⁴I_15/2 at 650 nm have been observed upon an excitation with a UV source and a 980 nm laser diode, and the involved mechanisms have been explained. It is quite interesting to observe obvious differences both in the excitation and the upconversion emission spectra of Er³⁺/Yb³⁺-codoped Gd₂(MoO₄)₃ respectively with monoclinic and orthorhombic structure. The quadratic dependence of fluorescence on excitation laser power has confirmed that two-photons contribute to upconversion of the green–red emissions.     

Spectroscopy and laser properties of Tm<Superscript>3+</Superscript>:KY(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> crystal

The polarized absorption spectra of Tm³⁺-doped potassium yttrium tungstate (Tm:KY(WO₄)₂) crystal at room temperature were measured. The emission spectrum and lifetime of the ³ F ₄ excited state were determined. Using standard and modified Judd–Ofelt theories, the intensity parameters and the radiative lifetimes were calculated and good agreement with the experimental results was obtained for both theories. Continuous-wave laser operation in Tm:KYW crystal under laser diode pumping at 802 nm and 1750 nm was demonstrated with slope efficiency of 53% and 28% and output power of about 555 mW and 86 mW, respectively. PACS 42.55.Xi; 42.60.Pk; 42.70.Hj     

Resonator effects of Ar<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> ionic excimer pumped by electron beam

The third continuum of argon from 200 to 270 nm is obtained by electron beam pumping argon. With the front mirror and the rear mirror, the resonator effects are observed at 240 and 220 nm. Compared with the intensity of fluorescence, the intensity near 240 nm increases more than 10 times when the resonator is formed. In order to explain the origin of the continuum, the kinetic model on Ar₂⁺ and Ar₂²⁺ ionic excimers pumped by electron beam is built and calculated. Based on the theoretical results, the Ar₂⁺ ionic excimer should be responsible for the continuum around 240 nm.