On the stereochemistry of photoaddition between α,β-unsaturated ketones and olefins. III.

The α,β-unsaturated ketone $\text{1}$ yields with allene the photocycloadduct $\text{3}$ predicted by our empirical photoaddition rule and the byproduct 7. The formation of this material may be rationalized by the sequence $\text{1}$ → $\text{4}$ → $\text{5}$ → $\text{6}$ → $\text{7}$. The isomeric ketone $\text{2}$ is unreactive under the same conditions, since α addition is prohibited by the rule and β addition is severely blocked.     

Photochemical [3 + 2] cycloaddition of α,β-acetylenic ketones with simple olefins

Irradiation of 3-pentyn-2-one (1) in the presence of tetramethylethylene, isobutylene, and cis- and trans -2-butene leads to vinyldihydrofurans 3,5,6, 8 and 9 (Table 1) in a novel [3 + 2] photochemical cycloaddition reaction. A related adduct 13 is formed between tetramethylethylene and 5,5-dimethyl-3-hexyn-2-one (2). A mechanism incorporating an initial biradical that closes to a carbene (eqn 3) is proposed to account for these reactions.     

On the stereochemistry of photoaddition between α,β-unsaturated ketones and olefins

The stereochemistry of the photoaddition between α,β-unsaturated ketones and olefins is discussed. It is shown that the stereochemistry of the product is determined by the relative stability of the excited state. This stability can be judged by the application of the principles of conformational analysis, coupled with the assumption that the β-carbon of the excited state is pyramidal and can select the more stable configuration. Many examples derived mainly from synthetic work performed at the University of New Brunswick during the last ten years are in agreement with these assumptions.     

Organolanthanides in the catalysis of the hydrosilylation of olefins and ketones

Bis(cyclopentadienyl)(tetrahydrofurano)(p-tolyl)lutecium was found to be an efficient catalyst for the hydrosilylation of olefins and ketones.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 693–694, March, 1990.     

On the stereochemistry of photoaddition between α,β-unsaturated ketones and olefins—II

Some years ago an empirical rule, which allows the prediction of product stereochemistry in cis-photocycloaddition reactions of α,β-unsaturated ketones and olefins was tentatively proposed. Several additional examples, both selected from the literature and synthesized in our laboratory, seem to strengthen the validity of the rule.     

Ruthenium-catalyzed asymmetric epoxidation of olefins using H2O2, part II: catalytic activities and mechanism

Asymmetric epoxidation of olefins with 30 % H2O2 in the presence of [Ru(pybox)(pydic)] 1 and [Ru(pyboxazine)(pydic)] 2 has been studied in detail (pybox = pyridine-2,6-bisoxazoline, pyboxazine = pyridine-2,6-bisoxazine, pydic = 2,6-pyridinedicarboxylate). 35 Ruthenium complexes with sterically and electronically different substituents have been tested in environmentally benign epoxidation reactions. Mono-, 1,1-di-, cis- and trans-1,2-di-, tri-, and tetra-substituted aromatic olefins with versatile functional groups can be epoxidized with this type of catalyst in good to excellent yields (up to 100 %) with moderate to good enantioselectivies (up to 84 % ee). Additive and solvent effects as well as the relative rate of reaction with different catalysts have been established. It is shown that the presence of weak organic acids or an electron-withdrawing group on the catalyst increases the reactivity. New insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed epoxidation are proposed on the basis of density functional theory calculation and experiments.     

β-唑基烯基酮的合成、反应机理及生物活性研究

本文用不同的芳香醛与丙酮为原料 , 经过4步反应合成了14种新的β-唑基烯基酮. 经IR, ^1H NMR, MS及元素分析证实了它们的结构,通过质谱解析以及其它波谱手段,推测了该合成路线中关键的一步, 唑化的反应机理, 此外还进行了杀菌活性的测定, 初步找出了这类化合物的构效关系大致规律.     

Reduction of Aldehydes and Ketones by Transition Metal Hydrides. Part 2. Reaction of trans,trans-[WH(CO)2(NO)(PMe3)2] with pyridine,functionalized aldehydes,and ketones

The reaction of trans,trans-[WH(CO)₂(NO)(PMe₃)₂] ( 1 ) with (pyridin-2-yl)-substituted aldehydes and ketones, (pyridin-2-yl)C(O)R where R = H, Me, Ph, pyridin-2-yl, and with 6-methylpyridine-2-carbaldehyde was studied. In all cases, facile insertion of the C?O bond into the W? H bond was observed, with rapid subsequent extrusionof a coordinated CO ligand affording O,N-bidentate coordinated tungsten alkoxides. Only in case of pyridine-2-carbaldehyde and di(pyridin-2-yl) ketone, the initial n¹ O-bonded insertion product could be observed as unstable intemediates by low-temperature NMR.     

Detailed structures and mechanism of polymer solvation

In the present study, we simulated a model system, PE in biphenyl, to gain the insight into the detailed solvation structures and the molecular mechanism of polymer chain solvation. Using atomistic molecular dynamics (MD) simulation, it was found that when the biphenyl is far from PE chain or in the bulk, the dihedral angle of the two rings in the solvent molecule are approximately 32 degrees. But, the dihedral angel is about 27 degrees when the biphenyls are very close to the PE chain. In the first solvation shell, the orientation angle of the biphenyl long axis to the chain segment backbone was found to be enhanced around two values: approximately 0 and approximately 60 degrees. The detailed solvation structures found here include all dyad conformations (TT, TG, TG', GT, GG, GG', G'T, G'G, and G'G') and vary as a function of the distance between PE chain and biphenyls in the first solvation shell. The closer the the solvent molecule to the PE segment, the higher the TT conformation fraction response is. The other dyad conformations such as TG, GG', etc. undergo different decreases, respectively. This study shows that the solvation even in the Theta condition makes the overall size expansion or the chain stretched. Such a cooperative change was examined here and found not due to generating or losing a conformational state but due to a change in conformational distribution. This change occurs in the middle location of the chain instead of the chain end locations.     

Reduction of activated olefins by SmI2. Detouring the classical Birch mechanism and a negative order in SmI2

The reaction of an excess of 1,1-diaryl-2,2-dicyanoethylenes (1) with SmI2 is biphasic for olefin with at least one available para position. The first phase is completed in less than 0.5 s with the second phase extending over a few hundred seconds. This phase is second order with respect to the radical anion, which is formed in the dead-time of the mixing in the stopped flow spectrophotometer and is overall of -1 order in the initial concentration of SmI2. In this phase, a dimer is formed between two radical anions with the formation of a C-C bond between a benzylic and a para position. The second phase is enhanced by proton donors and shows an H/D kinetic isotope effect with MeOH. Minute amounts of ethylene glycol accelerated the reaction to such an extent that the second phase is "absorbed" into the first, rendering it rate determining. In this phase, the dianionic dimer disproportionates after protonation to furnish the neutral species and the anion, which after second protonation provides the reduced product. When the two para positions are occupied by substituents, the reaction takes place by the traditional Birch reduction sequence of electron-proton-electron-proton-transfer steps. It is shown that the detour mechanism, coupling followed by disproportionation, should be typical of olefin but not of carbonyl reduction. This difference stems from the dissimilarity in protonation rate on carbon and oxygen.     

A general process for the haloamidation of olefins. Scope and mechanism

A methodology is described for the addition of a bromine atom and an amide nitrogen in a trans sense to an olefinic double bond. The process, which is illustrated by numerous examples, involves the use of an N-bromoamide and a Lewis acid as a source of Br+ which reacts with the olefin. The amide group is derived from a nitrile and a water molecule which serve as nucleophiles for the overall three-component reaction. The bromoamidation is general for a broad range of olefins and nitriles. This reaction pathway provides access not only to vicinal bromoamides but also to N-acyl aziridines and oxazolines. From these, many types of amines and amino alcohols can be prepared. Examples are provided which delineate diastereo- and regioselectivity preferences. An analogous chloroamidation reaction is also described.     

Hydrogenation of ketones and olefins via hydrogen transfer catalyzed by rhodium and iridium phosphine complexes

The reduction of ketones and olefins by hydrogen transfer from isopropanol is catalyzed by tertiary phosphine complexes of rhodium and iridium. The influence of the nature of the ligands and of the reaction conditions on the catalytic activity has been investigated. The reduction of the carbonyl group in the presence of olefins is also reported.