Long-chain alkyl sulfonate micelle fission: a molecular dynamics study

In this study, we investigate micelle fission of long-chain alkyl sulfonate molecules using atomistic scale simulation. GROMACS software code with the united atom force field was applied. 0.5-μs parallel molecular dynamics simulation study was conducted for a surfactant/water system consisting of 192 sodium pentadecyl sulfonate and 40,553 water molecules. The large preassembled micelle was ruptured at Krafft above T?=?323-K temperature, and we track two ellipsoid-like micelles over the course of the production run. To estimate the micelle shape, we determined the principal moments of inertia and the eccentricity, which proved that the micelles have a pronounced prolate spheroid shape, which agrees well with our previous experimental data. The mechanism of micelle fission was explored in detail. The aggregation number, ionization degree, and other parameters obtained from simulation were consistent with existing experimental finding. The determined parameters in addition to simple visual inspection of trajectories revealed monomer-micelle exchange—with the estimated relaxation time τ ₁?=?10^??9s. We assume that the exchange process is conditioned by the unequal size of micelles leading to adjustment of aggregation number.     

A reversible tube-to-rod transition in a block copolymer micelle

A remarkable morphology transition occurs with a change in temperature for a diblock copolymer [poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFS40-b-PDMS480, PDI = 1.01)] in n-decane solution. This polymer, which forms nanotubes at 25 degrees C, rearranges to form short dense rods when the solution is heated to 50 degrees C. When the solution is cooled to 25 degrees C, the system evolves back to nanotubes. These experiments demonstrate that both structures are dynamic and represent equilibrium states of the material. Contrast matching static light-scattering measurements on the short dense rods show that the insoluble PFS core is rigid and has a length distribution similar to that seen in electron microscopy images.     

Sampling protein conformations and pathways

Protein flexibility and rigidity can be analyzed using constraint theory, which views proteins as 3D networks of constraints involving covalent bonds and also including hydrophobic interactions and hydrogen bonds. This article describes an algorithm, ROCK (Rigidity Optimized Conformational Kinetics), which generates new conformations for these complex networks with many interlocked rings while maintaining the constraints. These new conformations are tracked for the flexible regions of a protein, while leaving the rigid regions undisturbed. An application to HIV protease demonstrates how large the flap motion can be. The algorithm is also used to generate conformational pathways between two distinct protein conformations. As an example, directed trajectories between the closed and the occluded conformations of the protein dihydrofolate reductase are determined.     

Solute exchange between surfactant micelles by micelle fragmentation and fusion

Stopped-flow time-scan experiments on both Triton X-100 (TX100) micelle and sodium dodecylsulfate (SDS) micelles, with the pyrene-containing triglyceride 1 as a probe, establish that there are two distinct solute exchange mechanisms with rates on the time scale of milliseconds to minutes. One process exhibits second order kinetics with a rate proportional to the concentration of empty micelles. For TX100 micelles, this process is rapid (k₂≈10⁶ M⁻¹ s⁻¹ at 24.6°C) and is characterized by an activation energy of 160 kJ mol⁻¹. From the fact that this rate is nearly independent of the structure of the probe we infer that the exchange involves micelle fusion to form a short-lived super-micelle, followed by fragmentation to form two normal (or ‘proper’) micelles. The rate of the first-order process decreases as the size of the probe increases (1-octylpyrene>1-dodecylpyrene>1). For SDS, both rates are very sensitive to the salt (NaCl) concentration. All indications point to this exchange process involving rate-limiting fragmentation of the micelle into two sub-micelles, these in turn grow back to normal micelles by addition of surfactant monomers or by collision with other sub-micelles. We explain the dependence of this rate on the nature of the probe by suggesting that only sub-micelles of a certain size are capable of carrying the probe with them as they separate from the original micelle.     

Static aspects of the fission and fusion of3He drops

Using an effective³He-³He interaction, we have investigated the fission and fusion of³He drops from a static point of view. Our calculations show that a fission barrier develops for these neutral systems, and that their saddle configurations are rather elongate. The transition from oblate to prolate shapes as a function of the angular momentumL, as well as critical values for fission and fusion are discussed for some selected cases. We show that a kind of proximity potential can be extracted from the drop-drop interaction potentials.     

pH reversible micelle transition of a tertiary amine-based gemini surfactant in aqueous solution

In this work, we prepared a tertiary amide-based gemini surfactant (DSTAPA), which contained two pH-sensitive tertiary amide head groups. Then the molecule state distribution and self-assembly transition of the surfactant in aqueous solution were investigated under different pH conditions. The DSTAPA molecules were on the states of double cationic (DSTAPAH²⁺), single cationic (DSTAPAH⁺), and double tertiary amine groups (DSTAPA) under acidic, neutral, and basic conditions, respectively. With the variation of the molecule states, the sample was water-like below pH of 6.8 and immediately transformed to gel-like fluid between pH of 6.8 and 7.8, then changed to white precipitate with the further increase of pH value. Furthermore, the microstructure and regulation mechanism were investigated by rheological measurements, dynamic light scattering, and cryogenic transmission electron microscopy. The appearance and micelle transitions of the DSTAPA aqueous solution are actually owing to the spherical–worm-like micelle transition, leading to dramatic viscosity increase and hydrogel formation. This transition was completely reversible and repeated for at least three cycles. Finally, a reasonable mechanism of the transition was proposed based on the viewpoints of the molecular states and micelle structures. The DSTAPA aqueous system with pH-reversible property has a great potential application in oil and gas production.     

Online kinetic studies on intermediates of laccase-catalyzed reaction in reversed micelle

Using water/AOT/n-octane reversed micelle as the medium, the optical signal of the reactive intermediate of laccase-catalyzed oxidation of o-phenylenediamine, which was indetectable in aqueous solutions, was successfully captured. Thus online kinetic studies of the intermediate were accomplished. Two-way kinetic spectral data were acquired with stopped-flow technique. By resolving the data with global analysis software, both the kinetic curves and the absorption spectra of the components involved in the reaction process were simultaneously obtained. The whole reaction in the reversed micelle was proved to be composed of two successive steps, an enzymatic generation of the intermediate and a following nonenzymatic decay of the intermediate. A consecutive first-order kinetic model of the whole reaction was confirmed. The influences of microenvironmental factors of the medium (such as the pH value of the water pool and the water/AOT ratio) on the detection of the intermediate were also investigated.     

Denaturation of jack-bean urease by sodium n-dodecyl sulphate: a kinetic study below the critical micelle concentration

Kinetics of urease denaturation by anionic surfactant (sodium n-dodecyl sulphate, SDS) at concentrations below the critical micelle concentration (CMC) is investigated spectrophotometrically at neutral pH and the corresponding two-phase kinetic parameters of the process are estimated from a three-state reversible process using a binomial exponential relation based on the relaxation time method as: Using a prepared computer program, the experimental data are properly fitted into a binomial exponential relation, considering a two-phase denaturation pathway including a kinetically stable folded intermediate formed at SDS concentration of 1.1 mM. Forward and backward rate constants are estimated as: k(1)=0.2141+/-4.5 x 10(-3), k(2)=5.173 x 10(-3)+/-8.3 x 10(-5), k(-1)=0.09432+/-3.6 x 10(-4) and k(-2)=2.079 x 10(-3)+/-5.6 x 10(-5)s(-1) for the proposed mechanism. The rate-limiting step as well as the reaction coordinates in the denaturation mechanism are established. The mechanism involves formation of a kinetically stable folded native like intermediate through the electrostatic interactions. The intermediate was found to be more stable even than the native form (by about 9 kJmol(-1)) and still hexamer, because no loss of amplitude was observed. Electrophoresis experiments on the native and surfactant/urease complexes indicated a higher mobility for the kinetically folded native like intermediate.     

Multiple-humped fission and fusion barriers of actinide and superheavy elements

The energy of a deformed nucleus has been determined within a Generalized Liquid Drop Model taking into account the proximity energy, the microscopic corrections and quasi-molecular shapes. In the potential barrier a third peak exists for actinides when one fragment is close to a magic spherical nucleus while the other one varies from oblate to prolate shapes. The barrier heights and half-lives agree with the experimental data. The different entrance channels leading possibly to superheavy elements are studied as well as their α-decay.     

Laser induced fission of C60 with kinetic energy release

A neutral C₆₀ fullerene beam is ionised by 308 nm laser pulses. For each cluster sizeC _n ⁺ , 0n60 of the typical bimodal mass distributions known from the literature [1] velocity distributions have been determined by a time of flight method. A consistent interpretation of the measured mean velocities is obtained when binary fission of the parent molecule is assumed to be responsible for the fragmentation patterns, the total kinetic energy release being 0.45±0.1 eV independent of fragment mass and of laser fluence.     

The pH induced vesicle to micelle morphology transition of a THP‐protected polymer

A diblock copolymer consisting of tetrahydropyranyl acrylate (THPA) as a pH‐deprotectable block, and a permanently hydrophobic block, methyl acrylate, was synthesized by RAFT polymerization using a quaternary amine functionalized, hydrophilic, RAFT chain transfer agent. The polymer self‐assembled in water to form vesicles with D_h = 130 nm, as determined by DLS and cryogenic transmission electron microscopy. Acid catalyzed deprotection of the THPA units to yield acrylic acid resulted in a vesicle to micelle morphology transition, as evidenced by the decrease in hydrodynamic diameter to D_h = 19 nm and the observation of micelles by dry state transmission electron microscopy. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3026–3031     

Molecular simulation of an aerosol OT reverse micelle: 2. Energy and kinetic characteristics

The effect of the structure of a reverse micelle on the energy and kinetic characteristics of system components is studied via the molecular dynamics method with the use of the coarse-grain model of a surfactant ion. Partial energies are calculated and the behavior of the local electric potential is determined. It is shown that, despite a high ion concentration, the electric potential in the surface layer of a micelle behaves itself as in the surface layer of pure water. Coefficients of translational diffusion of the components are calculated on the basis of the Einstein relation for the dependence of rms displacement on time. Autocorrelation functions of the angular velocity of eigenvectors of water molecules are obtained.     

Heating-induced micelle to vesicle transition in the cationic-anionic surfactant systems: Comprehensive study and understanding

Heating-induced micelle to vesicle transition (MVT), which has been rarely reported in surfactant systems, was systemically studied in a number of mixed cationic-anionic surfactant systems. According to the turbidity measurements, the investigated systems can be divided into two classes: Class A and B. Heating-induced MVT was observed in Class A at certain total surfactant concentrations and mixed surfactant ratios, while no such transition was found in Class B. Further investigations revealed that the heating-induced MVT is more likely to take place in the cationic-anionic surfactant systems with relatively stronger molecule interaction and larger micelle aggregation number. The effects of several physicochemical factors, such as the variation of mixed surfactant ratios and the addition of n-decanol on the heating-induced MVT, were also studied.     

A kinetic study of pyrolytic pathways to benzocyclobutene

A simple gas flow reactor simulating flash vacuum pyrolysis conditions is described which yields appoximate rate values for monomolecular gas phase reactions and which has been used for a comparison and optimisation of pyrolytic elimination reactions leading to benzocyclobutene.     

Beta decay of the fission product Sb and a new complete evaluation of absolute gamma ray transition intensities

The radionuclide ¹²⁵Sb is a long-lived fission product, which decays to ¹²⁵Te by negative beta emission with a half-life of 1008 day. The beta decay is followed by the emission of several gamma radiations, ranging from low to medium energy, that can suitably be used for high-resolution detector calibrations, decay heat calculations and in many other applications. In this work, the beta decay of ¹²⁵Sb has been studied in detail. The complete published experimental data of relative gamma ray intensities in the beta decay of the radionuclide ¹²⁵Sb has been compiled. The consistency analysis was performed and discrepancies found at several gamma ray energies. Evaluation of the discrepant data was carried out using Normalized Residual and RAJEVAL methods. The decay scheme balance was carried out using beta branching ratios, internal conversion coefficients, populating and depopulating gamma transitions to ¹²⁵Te levels. The work has resulted in the consistent conversion factor equal to 29.59(13) %, and determined a new evaluated set of the absolute gamma ray emission probabilities. The work has also shown 22.99% of the delayed intensity fraction as outgoing from the 58 d isomeric 144 keV energy level and 77.01% of the prompt intensity fraction reaching to the ground state from the other excited states. The results are discussed and compared with previous evaluations. The present work includes additional experimental data sets which were not included in the previous evaluations. A new set of recommended relative and absolute gamma ray emission probabilities is presented.     

Nonmonotonic temperature dependence of heat capacity through the glass transition within a kinetic model

The heat capacity of a supercooled liquid subjected to a temperature cycle through its glass transition is studied within a kinetic model. In this model, the beta process is assumed to be thermally activated and described by a two-level system. The alpha process is described as a beta relaxation mediated cooperative transition in a double well. The overshoot of the heat capacity during the heating scan is well reproduced and is shown to be directly related to delayed energy relaxation in the double well. In addition, the calculated scan rate dependencies of the glass transition temperature T(g) and the limiting fictive temperature T(f) (L) show qualitative agreement with the known results. Heterogeneity is found to significantly reduce the overshoot of heat capacity. Furthermore, the frequency dependent heat capacity has been calculated within the present framework and found to be rather similar to the experimentally observed behavior of supercooled liquids.     

Synergistic sphere-to-rod micelle transition in mixed solutions of sodium dodecyl sulfate and cocoamidopropyl betaine

Static and dynamic light scattering experiments show that the mixed micelles of sodium dodecyl sulfate (SDS) and cocoamidopropyl betaine (CAPB) undergo a sphere-to-rod transition at unexpectedly low total surfactant concentrations, about 10 mM. The lowest transition concentration is observed at molar fraction 0.8 of CAPB in the surfactant mixture. The transition brings about a sharp increase in the viscosity of the respective surfactant solutions due to the growth of rodlike micelles. Parallel experiments with mixed solutions of CAPB and sodium laureth sulfate (sodium dodecyl-trioxyethylene sulfate, SDP3S) showed that the sphere-to-rod transition in SDP3S/CAPB mixtures occurs at higher surfactant concentrations, above 40 mM. The observed difference in the transition concentrations for SDS and SDP3S can be explained by the bulkier SDP3S headgroup. The latter should lead to larger mean area per molecule in the micelles containing SDP3S and, hence, to smaller spontaneous radius of curvature of the micelles (i.e., less favored transition from spherical to rodlike micelles). The static light scattering data are used to determine the mean aggregation number and the effective size of the spherical mixed SDS/CAPB micelles. From the dependence of the aggregation number on the surfactant concentration, the mean energy for transfer of a surfactant molecule from a spherical into a rodlike micelle is estimated.     

Shape transitions in lipid membranes and protein mediated vesicle fusion and fission

In the cell, the plasma membrane is often densely decorated by transmembrane proteins. The morphology and dynamics of the membrane are strongly influenced by the presence of proteins. In this paper, we use a coarse-grained model to explore the composite membrane-protein system and develop a simulation methodology based on thermodynamic integration to examine free energy changes during membrane shape transitions. The authors show that a critical concentration of conical membrane proteins or proteins with nonzero spontaneous curvature can drive the formation of small vesicles. The driving force of vesicle budding stems from the preference of proteins to gather in regions of high curvature. A sufficiently high concentration of proteins therefore can influence the topology of the membrane. The biological significance of our results is discussed.