Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

Summary. N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

New ionic liquid for inorganic cations analysis by capillary electrophoresis: 2-hydroxy- N , N , N -trimethyl-1-phenylethanaminium bis(trifluoromethylsulfonyl)imide (phenylcholine NTf2)

The potentialities of new ionic liquids (ILs) based on choline were evaluated as an electrophoretic medium in capillary electrophoresis for the analysis of alkaline and alkaline earth cations (Li⁺, K⁺, Na⁺, Cs⁺, Mg²⁺, Ba²⁺, Ca²⁺, and Sr²⁺) with indirect UV detection. Two types of capillaries were tested: an untreated fused silica and fused silica coated with a film of polyvinylalcohol. The coated capillary proved to be the best adapted for the metal ions studied. Moreover, it appeared that the nature of the ionic liquid anion influenced the baseline stability, and the bis(trifluoromethylsulfonyl) imide (NTf₂ ⁻) anion seemed to be the most efficient. These preliminary studies led us to synthesize a new ionic liquid, 2-hydroxy-N,N,N-trimethyl-1-phenylethanaminium NTf₂ (phenylcholine NTf₂). This liquid was able to act as the running electrolyte and probe, generating the background signal in indirect UV light and consequently simplifying the electrophoretic medium. Excellent baseline stability, good reproducibility, as well as good sensitivity of detection were obtained with this new ionic liquid. Thus, 510,000 plates/meter for Li⁺ with 40 mM IL were successfully obtained. The optimal concentration of IL was 20 mM with a detection limit ranging from 28 μg L⁻¹ for Li⁺ to 1,000 μg L⁻¹ for Cs⁺. This method (phenylcholine NTf₂ with polyvinylalcohol capillary) was applied to analyze different commercial source and mineral waters. Finally, the potentiality of this ionic liquid in nonaqueous capillary electrophoresis was explored. The use of phenylcholine NTf₂ with a fused silica capillary, in pure methanol medium and in the presence of acetic acid, made it possible to obtain separation selectivity different from that obtained in aqueous medium.     

Raman Spectroscopy and Ab-Initio Model Calculations on Ionic Liquids

A review of the recent developments in the study and understanding of room temperature ionic liquids are given. An intimate picture of how and why these liquids are not crystals at ambient conditions is attempted, based on evidence from crystallographical results combined with vibrational spectroscopy and ab-initio molecular orbital calculations. A discussion is given, based mainly on some recent FT-Raman spectroscopic results on the model ionic liquid system of 1-butyl-3-methylimidazolium ([C₄ mim][X]) salts. The rotational isomerism of the [C₄ mim]⁺ cation is described: the presence of anti and gauche conformers that has been elucidated in remarkable papers by Hamaguchi et al. Such presence of a conformational equilibrium seems to be a general feature of the room temperature liquids. Then the “localized structure features” that apparently exist in ionic liquids are described. It is hoped that the structural resolving power of Raman spectroscopy will be appreciated by the reader. It is of remarkable use on crystals of known different conformations and on the corresponding liquids, especially in combination with modern quantum mechanics calculations. It is hoped that these interdisciplinary methods will be applied to many more systems in the future. A few examples will be discussed.     

Ionic liquid promoted synthesis of 3-(2′-benzothiazolo)-2,3-dihydroquinazolin-4(1H)-ones

3-(2′-Benzothiazolo)-2,3-dihydroquinazolin-4(1H)-ones have been synthesized in high yields in the presence of 1-butyl-3-methylimidazolium bromide [bmim]Br as an ionic liquid; the reaction work-up is simple and the ionic liquid can be easily separated from the product and reused.     

Interfacial tension and wetting behavior of air/oil/ionic liquid systems

We measured the interfacial tension and the density of air/n-hexane, n-decane, 1-perfluorohexane/1-hexyl-3-methyl-imidazolium hexafluorophosphate systems as a function of temperature. From the air/ionic liquid surface tension values, it was suggested that Coulombic interaction between imidazolium cations and counter anions are not so much different between the surface and bulk. The density values indicated that the decrease of surface tension by saturating organics was closely correlated to the mutual solubility between ionic liquid and organics. Interfacial tension at the oil/ionic liquid interfaces suggested that ionic liquid molecules were more ordered at the oil/ionic liquid interfaces compared to the air/ionic liquid interfaces, but the decrease of the entropy due to the interfacial orientation of ionic liquid was compensated by the increase of the entropy due to the contact of different chemical species. The initial spreading coefficients and the Hamaker constants indicated that all the oil phases spread at the air/ionic liquid interfaces spontaneously, and form the complete wetting films.     

Ionic Liquid Promoted One-Pot Three-Component Reaction: Synthesis of Annulated Imidazo[1,2-a]azines Using Trimethylsilylcyanide

Imidazo[1,2-a]azine derivatives are synthesized by a one-pot three-component reaction of an 2-aminoazine, an aldehyde, and trimethylsilylcyanide in the presence of 1-n-butyl-3-methylimidazolium bromide as a recoverable ionic liquid, in moderate to excellent yields with relatively short reaction times.     

Efficient Baylis-Hillman Reaction via a 1,4-Diazabicyclo[2.2.2]octane-based Ionic Catalyst

A novel ionic catalyst, 1-butyl-4-aza-1-azoniabicyclo[2.2.2]octane chloride based on 1,4-diazabicyclo[2.2.2]octane was synthesized and applied in the Baylis-Hillman reaction, which occurred readily at room temperature to afford the corresponding adducts in good yield. The ionic catalyst could be recycled for seven runs without diminution in its catalytic activity.     

Activity coefficients at infinite dilution of organic solutes in N-alkylpyridinium bis(trifluoromethylsulfonyl)imide ([CnPY][NTf2], n = 2, 4, 5) using gas–liquid chromatography

The activity coefficients at infinite dilution, for both polar and non-polar solutes in the ionic liquids N-alkylpyridinium bis(trifluoromethylsulfonyl)imide ([C_nPY][NTf₂], n = 2, 4, 5) have been determined by gas–liquid chromatography using the ionic liquid as the stationary phase. The measurements were carried out at the temperatures from (303 to 353) K. The partial molar excess enthalpies at infinite dilution of the solutes in the ionic liquids were also derived from the temperature dependence of the values. The values of the selectivity for the hexane/benzene and cyclohexane/benzene separation problems were calculated from experimental infinite dilution activity coefficient values and compared to the other ionic liquids, taken from the recent literatures.     

[Bmim]Cl/FeCl3离子液体催化α-生育酚与β-D-五乙酰葡萄糖的糖基化反应

以[Bmim]Cl/FeCl₃(三氯化铁/氯化丁基甲基咪唑)离子液体作为反应介质和催化剂, 考察了离子液体的酸度、反应温度及反应时间对α-生育酚与β-D-五乙酰吡喃型葡萄糖糖基化反应的影响. 结果表明, 离子液体的催化活性与其酸强度密切相关, 离子液体的酸性越强, 其对此糖基化反应催化活性越高. 在FeCl₃与[Bmim]Cl物质的量比为2的[Bmim]Cl/FeCl₃离子液中, α-生育酚与β-D-五乙酰吡喃型葡萄糖在45 ℃下反应3 h, 可以得到较高的转化率, α-生育酚的转化率最高可达70.2%. 同有机溶剂作为反应介质相比, 反应条件温和, 反应时间短, 室温离子液体具有更好的催化活性, 所得产物与离子液体不溶, 便于分离, 催化体系可循环使用, 且对环境友好.     

L-脯氨酸对离子液体介质中的不对称Michael反应催化性能研究

研究了L-脯氨酸对离子液体介质中醛(酮)与β-硝基烯烃的不对称Michael加成反应的催化性能, 利用X射线单晶衍射对Michael产物结构进行了表征. 结果表明, 反应在遵循胺催化机理的同时, 烯胺是从Re面对β-硝基烯烃进行加成, 产物的优势结构为(1R,2S)的syn型. 脯氨酸在离子液体1-正己基-3-甲基咪唑氯盐中显示良好的催化性能, 室温反应3～5 h, 得到89%以上收率的Michael产物, 其ee值最高70%. 脯氨酸与离子液体形成的催化体系具有良好的重复使用性能, 可至少稳定地重复使用6次.     

Clean synthesis of azo compounds using Magtrieve? in the ionic liquid [bmim][Br]

A series of azo compounds, N-aryl-2-phenyldiazenecarboxamides, and 4-substituted-1,2,4-triazoline-3,5-diones, were synthesized using Magtrieve™, a magnetically retrievable and recyclable oxidant, in the ionic liquid [bmim][Br] under neutral condition. This procedure has several advantages, such as greenness, mild reactions, simple manipulation, and reusability of reagent and solvent.     

五种1-烷基-2,3-二甲基咪唑型离子液体的合成及作为Li/LiFeO_4电池电解液的研究

合成了五种新的1-烷基-2,3-二甲基咪唑二(三氟甲基磺酰)亚胺离子液体(alkyl-DMimTFSI).以离子液体作为Li/LiFeO4电池电解液,分别考察不同烷基(正丁基、正戊基、正辛基、异辛基和正癸基)对电解液理化性质、界面性质和电池行为的影响.结果表明离子液体的电化学窗口都可以达到5.6V(-0.4～5.2Vvs.Li+/Li),显示它们具有较好的电化学稳定性.加入碳酸亚乙烯酯作为添加剂后,离子液体电解液在Li负极形成稳定的固体电解质相界面膜(SEI),从而提高了Li负极的稳定性,保护了Li片不受腐蚀.电化学阻抗和循环伏安分析进一步揭示LiFeO4正极与离子液体电解液也有良好的兼容性.此外,研究还表明离子液体中烷基种类严重影响它们的电池行为.采用butyl-DMimTFSI和amyl-DMimTFSI电解液体系的电池充放电容量和可逆性明显优于另外三种离子液体,它们的首次放电容量分别达到145和152.6mAh/g,并表现出良好的充放电循环性能.因粘度最大,采用isooctyl-DMimTFSI电解液的电池首次放电容量仅为8.3mAh/g,但添加碳酸丙烯酯(质量比1∶1)稀释后首次放电容量上升至132.4mAh/g.     

Osmotic and activity coefficients in the binary solutions of 1-butyl-3-methylimidazolium chloride and bromide in methanol or ethanol at T = 298.15 K from isopiestic measurements

Osmotic coefficients of the binary solutions of two room-temperature ionic liquids (1-butyl-3-methylimidazolium chloride and bromide) in methanol and ethanol have been measured at T = 298.15 K by the isopiestic method. The experimental osmotic coefficient data have been correlated using a forth-order polynomial in terms of (molality)^0.5, with both, ion interaction model of Pitzer and electrolyte non-random two liquid (e-NRTL) model of Chen. The values of vapor pressures of above-mentioned solutions have been calculated from the osmotic coefficients. The model parameters fitted to the experimental osmotic coefficients have been used for prediction of the mean ionic activity coefficients of those ionic liquids in methanol and ethanol.     

Br?nsted Acids in Ionic Liquids: Fundamentals, Organic Reactions, and Comparisons

A background for studying acids in various solvents is developed, emphasizing the importance of knowing to what extent a solvent conducts electricity and is therefore ionized, the dissociation equilibria of common molecular solvents and the acidic and basic species generated by solvent leveling. Acidity measurements in the atypical solvent water are discussed and the common method of expressing acidity in other systems – by Hammett values – is introduced. Representative examples of reactions involving Br?nsted acids in ionic liquids are presented and attention paid to the questions of speciation and acidity values. It is found that the gas phase proton affinity of a base is often a better guide to the acidity of its conjugate acid in an ionic liquid than is the dissociation constant of the said acid in water.     

Superfluorinated Ionic Liquid Crystals Based on Supramolecular,Halogen‐Bonded Anions

Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen‐bonded supramolecular anions [C_nF_{2 n+1}‐I⋅⋅⋅I⋅⋅⋅I‐C_nF_{2 n+1}]⁻ are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen‐bonded liquid crystals, and 2) imidazolium‐based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.     

Thiazolium Salt Immobilized on Ionic Liquid: An Efficient Catalyst and Solvent for Preparation of α-Hydroxyketones

Aldehydes were efficiently converted to acyloins and benzoins using a new ionic liquid, 3-[2-(1-butyl-1H-imidazol-1,3-ium-3-yl)ethyl]-4,5-dimethyl-1,3-thiazol-3-ium dibromide 1 . This ionic liquid is introduced as a catalyst and a solvent. Acyloins and benzoins were easily isolated from the reaction mixture via simple extraction, and the ionic liquid could be recycled for further use. Also, α-hydroxy ketones with an aromatic and aliphatic substituent were prepared starting from aromatic and aliphatic aldehydes in the presence of ionic liquid 1 .     

鞘磷脂和神经节苷脂对磷脂酰乙醇胺混合脂超分子体系液晶态立方相Im3m和Pn3m结构影响的研究

用磷脂酰乙醇胺(DEPE)、鞘磷脂(Sphingomyeline, Sph)、神经节苷脂(Gm1)和胆固醇(Chol)模拟了生物膜超分子体系液晶态结构, 通过用小角X射线衍射(SAXD)对混合脂体系液晶态结构进行了研究, 鉴定出了两种立方相: 即Im3m(Q²²⁹)和Pn3m(Q²²⁴)结构. 实验发现, 鞘磷脂的含量对DEPE膜的结构有一定的影响, 随着鞘磷脂浓度的增加, 混合脂体系的液晶态结构发生了由Im3m(Q²²⁹)到Pn3m(Q²²⁴)的变化. 神经节苷脂(Gm1)的含量对混合脂体系的液晶态结构也有一定的影响, 当神经节苷脂(Gm1)含量达到某一临界值时, 混合脂体系的液晶态结构发生了从Im3m(Q²²⁹)到Pn3m(Q²²⁴) 的变化. 当DEPE-Shp-Gm1超分子聚集体中含有胆固醇时, 胆固醇的极性头部(—OH)与磷脂酰乙醇胺(DEPE)、鞘磷脂(Shp)、神经节苷脂(Gm1)的极性头部通过氢键相互作用形成液晶态立方相Im3m(Q²²⁹)结构, 再通过疏水/亲水相互作用形成稳定的Pn3m (Q²²⁴)结构.     

Superfluorinated Ionic Liquid Crystals Based on Supramolecular,Halogen‐Bonded Anions

Unconventional ionic liquid crystals in which the liquid crystallinity is enabled by halogen‐bonded supramolecular anions [C_nF_{2 n+1}‐I???I???I‐C_nF_{2 n+1}]^? are reported. The material system is unique in many ways, demonstrating for the first time 1) ionic, halogen‐bonded liquid crystals, and 2) imidazolium‐based ionic liquid crystals in which the occurrence of liquid crystallinity is not driven by the alkyl chains of the cation.     

室温离子液体FeCl3-BPC体系的研究

利用差示扫描量热法(DSC)建立了无水三氯化铁和氯化正丁基吡啶(BPC)二元体系相图. 依据相图, FeCl₃和BPC形成室温离子液体的窗口是x＝0.26～0.58; 室温离子液体的深度是80 ℃. 利用UHF/6-31G^*对FeCl₃, FeCl₄^－, Fe₂Cl₇^－等配合物的几何结构、键长、能量和Raman频率进行优化, 从头算和Raman光谱证实了相图中FeCl₃摩尔分数x＝0.50处有稳定化合物存在, FeCl₄^－是主要阴离子; x＝0.67处, FeCl₄^－, Fe₂Cl₇^－是主要阴离子.