Sonoprocessing of wetting of SiC by liquid Al: A thermodynamic and kinetic study

The sonoprocessing of droplet spreading during the wetting process of molten aluminum droplets on SiC ceramic substrates at 700 °C is investigated in this paper. When wetting is assisted by a 20 kHz frequency ultrasonic field, the wettability of liquid metal gets enhanced, which has been determined by the variations in thermodynamic energy and wetting kinetics. Wetting kinetic characteristics are divided into two stages according to pinning and depinning states of substrate/droplet contact lines. The droplet is static when the contact line is pinning, while it is forced to move when the contact line is depinning. When analyzing the pinning stage, high-speed photography reveals the evidence of oxide films being rapidly crushed outside the aluminum droplet. In this work, atomic models of spherical Al core being wrapped by alumina shell are tentatively built, whose dioxide microstructures are being transformed from face-centered cubic into liquid at the atomic scale. At the same time, the wetting experiment reveals that the oxide films show changes in the period of sonoprocessing from 3rd to 5th second.During the ultrasonic spreading behavior in the late stage, there is a trend of evident expansion of the base contact area. The entire ultrasonic process lasts for no longer than 10 s. With the aid of ultrasonic sinusoidal waves, the wettability of metal Al gets a rapid improvement. Both molecular dynamic (MD) investigations and the experiments results reveal that the precursor film phenomenon is never found unless wetting is assisted by ultrasonic treatments. However, the precursor film appears near the triple line after using ultrasonics in the droplet wetting process, whose formation is driven by ultrasonic oscillations. Due to the precursor film, the ultrasonic wetting contact angle is lower than the non-ultrasonic contact angle. In addition, the time-variant effective ultrasonic energy has been quantitatively evaluated. The numerical expressions of thermodynamic variables are well verified by former ultrasonic spreading test results, which altogether provide an intrinsic explanation of the fast-decreasing contact angle of Al/SiC.     

Morphological stability analysis of partial wetting

We develop a macroscopic static theory of the morphological stability of partial wetting. The system we studied consist of a smooth horizontal solid surface and some non-volatile liquid on it. A necessary condition for the stable equilibrium of such systems is known as the Young condition on the contact angle made at the contact line where the free surface of liquid meets the solid surface. But this condition is local and is not sufficient for the stability. We present a formulation for studying the stability of systems which satisfy the Young condition. Then we apply this to several morphologies of wetting. We find that there are at least two fundamental morphologies that we call a hole and a ridge, which are thermodynamically unstable against certain infinitesimal deformations of the contact lines. The hole type instability has also been found recently [D. J. Srolovitz and S. A. Safran, J. Appl. Phyys., 60 (1986), 1]. We also derived a reduced expression for the wetting energy as a functional of the contact line positions under the assumption of almost flat free surface of the liquid. This serves us to understand the characteristic length scale which appears in the ridge type instability. Besides these instabilities there is another category of morphological instability in which the system becomes unstable against an infinitesimal deformation of the free surface of liquid. We show this by an illustrating example in which the instability is described as the so-called tangent bifureation in nonlinear systems.     

Film transitions of receding contact lines

When a solid plate is withdrawn from a liquid bath, a receding contact line is formed where solid, liquid, and gas meet. Above a critical speed U_cr, a stationary contact line can no longer exist and the solid will eventually be covered completely by a liquid film. Here we show that the bifurcation diagram of this coating transition changes qualitatively, from discontinuous to continuous, when decreasing the inclination angle θ_p of the plate. We show that this effect is governed by the presence of capillary waves, illustrating that the large scale flow strongly effects the maximum speed of dewetting.     

微矩形凹槽表面液滴各向异性浸润行为的研究

受自然界启发,仿生微结构被广泛用于调控固-液界面的性质.研究显示,液滴在微结构表面的各向异性浸润行为可用于实现微流动方向和速度的控制,且其各向异性浸润与微结构的尺寸和分布等密切相关.本文研究了微矩形凹槽尺寸对液滴各向异性浸润行为的影响规律.结果显示,液滴沿平行沟槽的方向具有较小的运动阻力、易铺展,因此具有较小接触角;而垂直于沟槽方向,由于沟槽的阻隔作用具有较大运动阻力,因而具有较大接触角,并且在垂直方向液滴的浸润过程是三相线一系列钉扎和跳跃行为.在微矩形凹槽表面,液滴沿平行方向接触角θ//与肋板宽度R和凹槽宽度G密切相关,其值与表面固体面积比成反比;而垂直于沟槽方向的接触角θ⊥随肋板宽度R和凹槽宽度G变化基本保持不变.同时各向异性液滴的变形比L/W、特征方向接触角比值θ⊥/θ//与表面固体面积比成正比.研究结果有助于加深理解微结构表面浸润行为的机制,并为微矩形凹槽在微流动控制方向的应用提供技术支持.     

Grain Boundary Phase Transitions and their Influence on Properties of Polycrystals

Grain boundary (GB) phase transitions can change drastically the properties of polycrystals. The GB wetting phase transition can occur in the two-phase area of the bulk phase diagram where the liquid (L) and solid (S) phases are in equlibrium. Above the temperature of the GB wetting phase transition a GB cannot exist in equlibrium contact with the liquid phase. The experimental data on GB wetting phase transitions in numerous systems are analysed. The GB wetting tie-line can continue in the one-phase area of the bulk phase diagram as a GB solidus line. This line represents the GB premelting or prewetting phase transitions. The GB properties change drastically when GB solidus line is crossed by a change in the temperature or concentration. The experimental data on GB segregation, energy, mobility and diffusivity obtained in various systems both in polycrystals and bicrystals are analysed. In case if two solid phases are in equilibrium, the GB “solid state wetting” can occur. In this case the layer of the solid phase 2 has to substitute GBs in the solid phase 1. Such GB phase transition occurs if the energy of two interphase boundaries is lower than the GB energy in the phase 1.     

The debate on the dependence of apparent contact angles on drop contact area or three-phase contact line: A review

A sessile drop is an isolated drop which has been deposited on a solid substrate where the wetted area is limited by the three-phase contact line and characterized by contact angle, contact radius and drop height. Although, wetting has been studied using contact angles of drops on solids for more than 200 years, the question remains unanswered: Is wetting of a rough and chemically heterogeneous surface controlled by the interactions within the solid/liquid contact area beneath the droplet or only at the three-phase contact line? After the publications of Pease in 1945, Extrand in 1997, 2003 and Gao and McCarthy in 2007 and 2009, it was proposed that advancing, receding contact angles, and contact angle hysteresis of rough and chemically heterogeneous surfaces are determined by interactions of the liquid and the solid at the three-phase contact line alone and the interfacial area within the contact perimeter is irrelevant. As a consequence of this statement, the well-known Wenzel (1934) and Cassie (1945) equations which were derived using the contact area approach are proposed to be invalid and should be abandoned. A hot debate started in the field of surface science after 2007, between the three-phase contact line and interfacial contact area approach defenders. This paper presents a review of the published articles on contact angles and summarizes the views of the both sides. After presenting a brief history of the contact angles and their measurement methods, we discussed the basic contact angle theory and applications of contact angles on the characterization of flat, rough and micropatterned superhydrophobic surfaces. The weak and strong sides of both three-phase contact line and contact area approaches were discussed in detail and some practical conclusions were drawn.     

Avoided critical behavior in dynamically forced wetting

A solid object can be coated by a nonwetting liquid since a receding contact line cannot exceed a critical speed. In this Letter we study the dynamical wetting transition at which a liquid film gets deposited by withdrawing a vertical plate out of a liquid reservoir. It has recently been predicted that this wetting transition is critical with diverging time scales and coincides with the disappearance of stationary menisci. We demonstrate experimentally and theoretically that the transition is due to the formation of a solitary wave, well below the critical point. As a consequence, relaxation times remain finite at threshold. The structure of the liquid deposited on the plate involves a capillary ridge that does not trivially match the Landau-Levich film.     

Phase field modeling of hysteresis in sessile drops

We propose a novel approach to describe wetting of plane solid surfaces by liquid drops. A two-dimensional nonconserved phase field variable is employed to distinguish between wetted and nonwetted regions on the surface. The imbalance in the Young's force provides for the exchange of relative stability of the two phases. The three-phase contact line tension arises from the gradient energy and contact angle hysteresis from the kinetic coefficient. Using this theory, we discuss contact angle hysteresis on chemically heterogeneous surfaces. We show significant departure from the classical Cassie theory, which is attributed to defect pinning of the continuous triple line.     

Model for the extreme wetting hysteresis of liquid helium on cesium

Although the liquid- 4He-cesium system is a nearly ideal one for studying wetting phenomena, it can show extreme hysteresis which is profoundly nonideal in behavior. It is suggested that this is due to the roughness of these Cs surfaces. We show that stable micropuddles of liquid 4He can form in shallow cavities on a Cs surface. It is the potential to form micropuddles, as the liquid tries to recede, which pins the contact line due to the large energy needed to create the surface of a micropuddle. This model also accounts for the memory that these surfaces have of being in contact with liquid 4He.     

Short-time dynamics of partial wetting

When a liquid drop contacts a wettable surface, the liquid spreads over the solid to minimize the total surface energy. The first moments of spreading tend to be rapid. For example, a millimeter-sized water droplet will wet an area having the same diameter as the drop within a millisecond. For perfectly wetting systems, this spreading is inertially dominated. Here we identify that even in the presence of a contact line, the initial wetting is dominated by inertia rather than viscosity. We find that the spreading radius follows a power-law scaling in time where the exponent depends on the equilibrium contact angle. We propose a model, consistent with the experimental results, in which the surface spreading is regulated by the generation of capillary waves.     

Wetting, spreading, and adsorption on randomly rough surfaces

The wetting properties of solid substrates with customary (i.e., macroscopic) random roughness are considered as a function of the microscopic contact angle of the wetting liquid and its partial pressure in the surrounding gas phase. Analytic expressions are derived which allow for any given lateral correlation function and height distribution of the roughness to calculate the wetting phase diagram, the adsorption isotherms, and to locate the percolation transition in the adsorbed liquid film. Most features turn out to depend only on a few key parameters of the roughness, which can be clearly identified. It is shown that a first-order transition in the adsorbed film thickness, which we term "Wenzel prewetting", occurs generically on typical roughness topographies, but is absent on purely Gaussian roughness. It is thereby shown that even subtle deviations from Gaussian roughness characteristics may be essential for correctly predicting even qualitative aspects of wetting.     

Dielectrowetting driven spreading of droplets

The wetting of solid surfaces can be modified by altering the surface free energy balance between the solid, liquid, and vapor phases. Here we show that liquid dielectrophoresis induced by nonuniform electric fields can be used to enhance and control the wetting of dielectric liquids. In the limit of thick droplets, we show theoretically that the cosine of the contact angle follows a simple voltage squared relationship analogous to that found for electrowetting on dielectric. Experimental observations confirm this predicted dielectrowetting behavior and show that the induced wetting is reversible. Our findings provide a noncontact electrical actuation process for meniscus and droplet control.     

Experimental investigation of mesoscale crack front triple line

The aim of this paper is to investigate the mesoscale behavior and structure of an adhesive near the fracture front of an asymmetric joint consisting of carbon fiber/epoxy resin composites bonded with a relatively soft, epoxy adhesive. A single cantilever beam fracture test at constant separation rate gave steady-state crack propagation, details of which were followed by digital image correlation (DIC). A deformed, triple line region was found between the adhesive, air, and the composite, somewhat resembling a “wetting ridge,” as found with a liquid meniscus in contact with a soft solid. Importantly, the partially separated bondline layer took part in (non-unidirectional) load transfer between adherends (and thus energy dissipation), contrary to common assumptions where the separated bondline is assumed no longer to play a structural role. A simple model, based on the Flamant contact mechanics approach, is proposed and compared with both a finite element solution and experimental data extracted from image correlation. The model points out the importance of two length scales: process zone extent and adhesive thickness, both being known to affect global properties of bonded structures.     

Effect of contact line curvature on solid-fluid surface tensions without line tension

For sessile droplets partially wetting a solid surface, it has been observed experimentally that the value of the contact angle depends on the contact line curvature and this dependence has been attributed to tension in the contact line. But previous analyses of these observations have neglected adsorption at the solid-liquid interface and its effect on the surface tension of this interface. We show that if this adsorption is taken into account the relation between the contact angle and contact line curvature is completely accounted for without introducing line tension. Further, from the observed relation between the contact angle and contact line curvature, the adsorption at the solid-liquid interface can be determined, as can the surface tensions of the solid-liquid and solid-vapor interfaces.     

浸润接触线的摩擦性质与固体表面张力的Wenzel行为

依据Adam和Jessop关于固-液-气三相接触线具有静摩擦性的观点，能从浸润接触角数据推算 出固体的表面张力系数，但结果显然会与摩擦条件的具体形式有关.以报道的不锈钢和聚丙 烯实验数据为例，通过对比Mises和Amonton两种摩擦定律给出的表面张力系数，后者给出的 张力才具有总是随表面粗糙性的增大而增加的Wenzel效应，以及当固-液，固-气界面的张力 系数之差等于液-气界面的张力系数时，退后角将变为零的全浸润条件.这似乎表明用Amonto n定律描写接触线的静摩擦要更为合理. 关键词： 浸润角 静摩擦 固体表面张力     

液态镓在石墨烯表面的润湿性及形貌特征

液态Ga及其合金的熔点低、毒副作用小、导电率高,使得这类液态金属能像石墨烯一样被广泛应用于微流器件、柔性电子器件中,制备这些器件的关键在于有效控制各生产环节中液态金属在固体界面上的润湿性及形貌特征.基于Lennard-Jones(L-J)势函数,利用分子动力学模拟方法研究了金属Ga在石墨烯表面的润湿性,根据模拟结果拟合的L-J势参数能正确描述Ga原子与衬底之间的相互作用并得到了与实验值极为接近的润湿角,发现衬底与液膜间相互作用的微小改变都会对最终润湿形态产生极大影响,平衡态的润湿角和脱离衬底速度随着Ga-C间势能的减小而增大,并成功获得了不同厚度的Ga液膜在石墨烯表面的形态演变规律,极为符合液态Ga的基本特性.利用所得L-J势函数参数模拟了液态Ga在粗糙度相同但纳米柱尖端形貌不同的C材料表面的润湿演变,发现纳米柱尖端形貌对液态Ga的润湿过程及状态影响极大.     

Wetting by solid helium,a model system

This is a review of the wetting properties of solid helium on various solid substrates. Due to its extreme purity and to its very fast growth dynamics, solid helium 4 is often considered as a model system in materials science. Several wetting phenomena have been studied with helium 4 crystals, namely contact angles on solid substrates with variable roughness, wetting on graphite where epitaxial growth takes place, the roughening transition as a function of film thickness, the wetting of grain boundaries by the liquid phase.     

A lattice Boltzmann method for incompressible two-phase flows on partial wetting surface with large density ratio

This paper reports a new numerical scheme of the lattice Boltzmann method for calculating liquid droplet behaviour on particle wetting surfaces typically for the system of liquid–gas of a large density ratio. The method combines the existing models of Inamuro et al. [T. Inamuro, T. Ogata, S. Tajima, N. Konishi, A lattice Boltzmann method for incompressible two-phase flows with large density differences, J. Comput. Phys. 198 (2004) 628–644] and Briant et al. [A.J. Briant, P. Papatzacos, J.M. Yeomans, Lattice Boltzmann simulations of contact line motion in a liquid–gas system, Philos. Trans. Roy. Soc. London A 360 (2002) 485–495; A.J. Briant, A.J. Wagner, J.M. Yeomans, Lattice Boltzmann simulations of contact line motion: I. Liquid–gas systems. Phys. Rev. E 69 (2004) 031602; A.J. Briant, J.M. Yeomans, Lattice Boltzmann simulations of contact line motion: II. Binary fluids, Phys. Rev. E 69 (2004) 031603] and has developed novel treatment for partial wetting boundaries which involve droplets spreading on a hydrophobic surface combined with the surface of relative low contact angles and strips of relative high contact angles. The interaction between the fluid–fluid interface and the partial wetting wall has been typically considered. Applying the current method, the dynamics of liquid drops on uniform and heterogeneous wetting walls are simulated numerically. The results of the simulation agree well with those of theoretical prediction and show that the present LBM can be used as a reliable way to study fluidic control on heterogeneous surfaces and other wetting related subjects.     

A mesoscopic model for (de)wetting

We present a mesoscopic model for simulating the dynamics of a non-volatile liquid on a solid substrate. The wetting properties of the solid can be tuned from complete wetting to total non-wetting. This model opens the way to study the dynamics of drops and liquid thin films at mesoscopic length scales of the order of the nanometer. As particular applications, we analyze the kinetics of spreading of a liquid drop wetting a solid substrate and the dewetting of a liquid film on a hydrophobic substrate. In all these cases, very good agreement is found between simulations and theoretical predictions.